Scribd
Upload
56 views2 pages

Print Instructions-Really Annoying Card Container

Uploaded by

8tsphgxvy9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Print Instructions-Really Annoying Card Container

Uploaded by

8tsphgxvy9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Model Name

Really Annoying Card Container


Model Description:
The Really Annoying Card Container, the more irritating version of The Annoying Gift Box. Instead of 20 bolts, this one has 134 that
have to be removed to get to the contents inside.

It is scaled just about gift-card-size, so you can scale up as you want to fit bigger items.

Printing Info:
**These are just the settings I used to test the model, feel free to use whatever settings work best for you.
FDM or Resin: FDM
Scaling: Can be scaled up, bolts likely won't work well if scaled down.
Supports: None
Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver.
Nozzle Size: 0.4
Layer Height: 0.2

Printing & Assembly


No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need
to print all of the pieces, plus 134 bolts.

There is no screwdriver included, because find your own. (Ya know, to be more irritating).

I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make
sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in
that orientation.

File List (9):


- bolt (need 134) (STL)
- box_1_container (STL)
- box_1_lid (STL)
- box_2_container (STL)
- box_2_lid (STL)
- box_2_sleeve (STL)
- box_3_bottom (STL)
- box_3_top (STL)
- annoying_box_thread_test (STL)
No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need
to print all of the pieces, plus 134 bolts.

There is no screwdriver included, because find your own. (Ya know, to be more irritating).

I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make
sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in
that orientation.

File List (9):


- bolt (need 134) (STL)
- box_1_container (STL)
- box_1_lid (STL)
- box_2_container (STL)
- box_2_lid (STL)
- box_2_sleeve (STL)
- box_3_bottom (STL)
- box_3_top (STL)
- annoying_box_thread_test (STL)

Changelog/Additional Notes
1/7/2023: (Initial Upload to Patreon)
- Uploaded Really Annoying Card Container v1

You might also like