Scribd
Upload
51 views1 page

CA Control 202003 4

Daikin

Uploaded by

rehmatulla2000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

CA Control 202003 4

Daikin

Uploaded by

rehmatulla2000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AC8800 Touch-screen type FCU thermostat

Connection wire: 150mm


For networking functions Integrated power box

AC8800 series touch-screen thermostat can be used for indoor temperature control of fan coil system (AC 3-speed, AC
4-speed) for central air conditioner. It can detect the room temperature through the built-in temperature sensor, and then
compare the room temperature with the temperature set by the user in real time. By controlling the fan speed of the fan coil
and the on/off water valve, it can realize indoor temperature adjustment, comfort, and energy saving.

AC8800 also has RS485 modbus communication function for BMS control and its steady performance contribute a lot to the
building automation control system.

Features Voltage range 85~265V 50/60Hz


Current load Resistive: 2A, Inductive: 1A
• LOGO breathing light Working condition -10~55℃ 5~95%(no dew)
• Large touch screen space (88%) Storage condition -10~55℃
• Silver shining panel Setting temperature range 5~30℃
• Wide viewing angle Control precision ±1℃
• Approach sensing Shell ABS (Flame resistant)
Wiring manner Compressing terminal
Application 88x88x14.5mm (Display)
Dimensions (W*H*D)
62*50*25mm (Power box)
■ Cool&heat 4-pipe system is ex-factory default setting
Purchase model

AC8800-A420-2022(Daikin Brand)
■ Cool&heat 2-pipe system can be used after setting by user
Purchase model AC8800-A420-2122 (Daikin Brand C/W
■ C ool&heat 2-pipe system+Electrcal heater can be used
Room card function)
after setting by user
■ Fan speed: High-Medium-Low-Auto

Specification*

▲ 2-wire on/off valve control / 3-wire on/off valve control for 2-pipe system / Fan on/off control can be achieved after setting by user
▲ RS485 network function ▲ Room card function(optional) ▲ Key locker
▲ ECO mode ▲ Sleeping mode ▲ Quite mode
▲ Timer ▲ Anti-freezing protection ▲ Auto power on
▲ Filter clean reminder ▲ Error alarm ▲ Room temperature calibration
▲ Unit convert between ℃ and ℉ ▲ Alternative display of setting temp. and room temp.
Remark: AC8800 should be equipped with CR1220 battery but does not come with it, the battery needs to be provided by the customer. Please refer to IOM for
detailed specification instruction and setting method.

You might also like