Scribd
Upload
35 views3 pages

Elec 3244-HW-1

Uploaded by

u3578202
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views3 pages

Elec 3244-HW-1

Uploaded by

u3578202
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ELEC 3244 Homework Assignment #1

1. The system T in Figure 1 is known to be time invariant. When the inputs to the system are x1[n], x2[n],
and x3[n], the responses of the system are y1[n], y2[n], and y3[n], as shown.

Figure 1

(a) Determine whether the system T could be linear.


(b) If the input x[n] to the system T is δ[n], what is the system response y[n]?
(c) What are all possible inputs x[n] for which the response of the system T can be determined from
the given information alone?

2. Consider the system in Figure 2.

Figure 2

(a) Determine the impulse response h[n] of the overall system.


(b) Determine the frequency response of the overall system.
(c) Specify a difference equation that relates the output y[n] to the input x[n].
(d) Is this system causal? Under what condition would the system be stable?
3. Let 𝑋(𝑒 𝑗𝜔 ) denote the Fourier transform of the signal x[n] shown in Figure 3. Perform the following
calculations (no need to explicitly evaluate 𝑋(𝑒 𝑗𝜔 )).

Figure 3

(a) Evaluate 𝑋(𝑒 𝑗𝜔 )|𝜔=0


(b) Evaluate 𝑋(𝑒 𝑗𝜔 )|𝜔=𝜋
(c) Find ∠𝑋(𝑒 𝑗𝜔 )
𝜋
(d) Evaluate ∫−𝜋 𝑋(𝑒 𝑗𝜔 )𝑑𝜔
(e) Determine and sketch the signal whose Fourier transform is 𝑋(𝑒 −𝑗𝜔 )
(f) Determine and sketch the signal whose Fourier transform is 𝑅𝑒{𝑋(𝑒 𝑗𝜔 )}

4. Consider the LTI system with impulse response


𝑗
ℎ[𝑛] = ( )𝑛 𝑢[𝑛], 𝑤ℎ𝑒𝑟𝑒 𝑗 = √−1
2
Determine the steady-state response, i.e., the response for large n, to the excitation

𝑥[𝑛] = cos(𝜋𝑛) 𝑢[𝑛]

5. A causal LTI system has the following system function:

4 + 0.25𝑧 −1 − 0.5𝑧 −2
𝐻(𝑧) =
(1 − 0.25𝑧 −1 )(1 + 0.5𝑧 −1 )
(a) What is the ROC for H(z)?
(b) Determine if the system is stable or not.
(c) Determine the difference equation that is satisfied by the input x[n] and output y[n].
(d) Use a partial fraction expansion to determine the impulse response h[n].
(e) Find the output sequence y[n] when the input is 𝑥[𝑛] = 𝑢[−𝑛 − 1].
6. The pole-zero diagram in Figure 4 corresponds to the z-transform X(z) of a causal sequence x[n].
Sketch the pole-zero diagram of Y(z), where 𝑦[𝑛] = 𝑥[−𝑛 + 3]. Also, specify the ROC for Y(z).

Figure 4

You might also like