Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    2 CMP 10

    Uploaded by

    AVP PAFCDO Project

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2 CMP 10

    Uploaded by

    AVP PAFCDO Project
    5 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views1 page

    2 CMP 10

    Uploaded by

    AVP PAFCDO Project

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Sheet No.

    : 4 0 0 7 - K
    Issued Date : Feb. 2023

    CMP AC-10
    (CMP AC-10)

    PRODUCT DESCRIPTION
    CMP AC-10 is a special synthetic resin paint giving a high-build quick drying, effective protection against
    corrosion. It possesses good sea water resistance and shows good adhesion to subsequent coats.

    PRODUCT INFORMATION
    Type Special synthetic resin anti-corrosive paint
    Steel ship's hull and other steel structures / Binder-coat for antifouling
    Recommended Use
    paint
    Type of binder Special synthetic resin
    Color SR (Silver Red), S (Silver)
    Flash Point 26.5 ℃
    Solids by Volume 41% ± 2 (Test Method : ISO-3233)
    VOC 537 g/ℓ (Korea Clean Air Conservation Act)
    Coverage(Theoretical) 5.46 ㎡/ℓ [0.183 ℓ/㎡] at D.F.T 75㎛
    Wet Film Thickness 122 – 244 ㎛
    Dry Film Thickness 50 – 100 ㎛
    Drying Time Temperature 5℃ 10℃ 20℃ 30℃
    (at D.F.T. 75㎛) Surface Dry 1 hr. 45 mins. 30 mins. 20 mins.
    Hard Dry 8 hrs. 6 hrs. 4 hrs. 3 hrs.
    Minimum (AC) 8 hrs. 6 hrs. 4 hrs. 3 hrs.
    Painting Interval
    (AF) 12 hrs. 8 hrs. 6 hrs. 5 hrs.
    (at D.F.T. 75㎛) Maximum - - - -
    Thinner RAVAX THINNER, CR/ACRI THINNER A
    Method of Application Airless spray, Brush, Roller
    Temperature : Minimum -5℃
    Humidity : Maximum 85 % R.H.
    For Airless spray ;
    Condition of Application Tip No. : GRACO 621, 623
    Paint output pressure : 11.7 – 14.7 MPa
    Viscosity : 1.6 Paㆍs

    EPICON ZINC RICH PRIMER B-2, CERABOND 2000,


    Preferable Preceding Coats
    BANNOH series, etc.
    ACRI FINISH series, SEA GRANDPRIX Series,
    Preferable Subsequent Coats
    SEAFLO NEO Series, etc.
    Packaging One pack product

    The information given in this sheet is effective at the date shown above and subject to revision from time to time without notice.

    You might also like