0% found this document useful (0 votes)
10 views3 pages

Pla+ Fda

Si
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
10 views3 pages

Pla+ Fda

Si
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Test Report

Report No.: WP-20076384-JC-44En Page :1 /3

Client: Shenzhen Esun Industrial Co.,Ltd


Wuhan University Building A403-I, No. 6 YueXing 2 Road, NanShan District,
Client Address:
Shenzhen
The following sample(s) was/were submitted and identified on behalf of the applicant as
Date of Sample Received: 2020-08-01

Test Period: 2020-08-01~2020-08-05

Test Requested: Selected test (s) as requested by client

Test Criterion: Please refer to next page(s)

Test Results: Please refer to next page(s)

Conclution: Please refer to next page(s)

Compiled by: Inspected by:

Approved by: Issued Date: 2020-08-06

Shanghai Micro-spectial Chemical Analysis and Test technology Co., Ltd.

Address:Building 9, Building 10, Building 18, Urban Industrial Park, Lane 139, Guowei Road, Yangpu District, Shanghai
Tel:400-776-7627 Zip code:200438 Web:www.weipujishu.com
Test Report
Report No.: WP-20076384-JC-44En Page :2 /3

Test Part Description:


No. Sample Name Sample ID Sample Description
001 PLA+ 200712199-1 Green plastic
Test Items and Methods:
Test Items Test methods
Chloroform-soluble extractives US FDA 21CFR 177.1975: Polyvinyl Chloride
Test Results:
Reporting Limit Client’s Limit Result
Test Condition Conclusion
(mg/inch2) (mg/inch2) (mg/inch2)

8% Ethanol(v/v),120℉,24h 0.3 18 N.D.

Distilled water, 120℉,24h 0.3 18 N.D. PASS

n-Heptane,70℉,30min 0.3 18 N.D.

Remarks:
(1)mg/inch2=milligram persquare inch.
(2)N.D.=Not Detected(Less than Reporting Limit).
(3)℉=Degrees Fahrenheit.
*** End of the Page***

Address:Building 9, Building 10, Building 18, Urban Industrial Park, Lane 139, Guowei Road, Yangpu District, Shanghai
Tel:400-776-7627 Zip code:200438 Web:www.weipujishu.com
Test Report
Report No.: WP-20076384-JC-44En Page :3 /3

Sample Picture(s):

*** End of the Report***

DECLARE
1.The report is invalid without the stamp of special seal for test or without the signature of the compiler, the
inspector and the approver.
2. No unauthorized changes, additions or deletions shall be made to the report.
3. Neither fragmented report nor its incomplete copy shall be deemed valid. The complete copy is invalid without
the stamp of special seal for test.
4. Any queries on the report shall be presented to Shanghai Micro-spectial Chemical Analysis and Test technology
Co.,Ltd. within 15 working days after receipt of the report.
5.The results described here in this report are based on the sample(s) tested. The results are presented to the client
for internal uses only and do not constitute any social grounds in the People’s Republic of China.
6. The client takes full responsible for the truthfulness of the testing sample(s) and information related thereto.

Address:Building 9, Building 10, Building 18, Urban Industrial Park, Lane 139, Guowei Road, Yangpu District, Shanghai
Tel:400-776-7627 Zip code:200438 Web:www.weipujishu.com

You might also like