Biology for Computer Engineers BBOC407

MODULE 5: TRENDS IN BIOENGINEERING (QUALITATIVE)

Syllabus
Muscular and Skeletal Systems as scaffolds, scaffolds and tissue engineering,
Bioprinting techniques and materials. Electrical tongue and electrical nose in food science,
DNA origami and Biocomputing, Bioimaging and Artificial Intelligence for disease diagnosis.
BIOMOLECULES
Bioconcrete. Bioremediation. Biomining.

Introduction:
Bioengineering is a discipline that applies engineering principles of design & analysis to biological
systems & biomedical technologies.
Examples of bioengineering research include bacteria engineered to produce chemicals, new
medical imaging technology, portable disease diagnostic devices, & tissue engineered organs.
Examples of bioengineering research include bacteria engineered to produce chemicals, new
medical imaging technology, portable and rapid disease diagnostic devices, prosthetics,
biopharmaceuticals, and tissue-engineered organs. Bioengineering overlaps substantially with
biotechnology and the biomedical sciences in a way analogous to how various other forms of
engineering and technology relate to various other sciences (such as aerospace engineering and
other space technology to kinetics and astrophysics).
In general, biological engineers attempt to either mimic biological systems to create products, or
to modify and control biological systems. Working with doctors, clinicians, and researchers,
bioengineers use traditional engineering principles and techniques to address biological processes,
including ways to replace, augment, sustain, or predict chemical and mechanical processes.
Branches of bioengineering may be categorized as:
Tissue engineering, Transdermal patches, Wearable devices, Robotic surgeons and Rehabilitation,
Nanorobots, Virtual reality, Microbubbles, Organ-on-a-chip, Mini bioreactors, gene editing.

Department of Chemistry, Sai Vidya Institute of Technology Page 1

Biology for Computer Engineers BBOC407

Muscular & skeletal systems as scaffolds

The muscular and skeletal systems are two interconnected and interdependent systems in the human
body.
They work together to provide support to the body, enable its movement, give protection to vital
organs and carry out various physiological functions essential for human life.
Architecture of Muscular & skeletal system
The muscular and skeletal systems work together to form the framework of the body, providing
support, movement, and protection for the body organs and tissues.
Muscular system is composed of muscles and tendons.
1. Muscles are responsible for movement by contracting and relaxing, and they work in pairs to
produce opposing movements. For example, the biceps and triceps in the arm work together
to produce flexion and extension of the elbow joint.
2. Tendons connect muscles to bones, allowing the muscles to pull on the bones and
produce movement.
Skeletal system is composed of bones, cartilage, and ligaments.
1. Bones provides rigid framework for body, protecting the organs and supporting the body
weight.
2. Cartilage acts as a cushion between bones reducing friction & absorbing shock during
movement.
3. Ligaments connect bones to other bones, providing stability & preventing excessive
movement.
Mechanism of working of muscular and skeletal system
The systems work together to produce movement and maintain stability in the body.
The mechanism involves following steps:
1. Contraction of muscles: When the brain sends a signal to a muscle to contract, the muscle
fibers shorten and pull on the tendons, which in turn pull on the bones. This produces
movement at the joint.
2. Transmission of force: When a muscle contracts, the force is transmitted through the tendons
to the bone, causing it to move.
3. Lever system: The bones in the body act as levers, with joints acting as fulcrums. The
arrangement of bones and joints in the body creates a system of levers that allows for efficient
movement with minimal energy expenditure.
4. Feedback mechanism: The nervous system provides feedback to the brain about the position
and movement of the body. This allows for fine-tuning of movements and helps to maintain
stability and balance.
Muscular and skeletal systems as scaffolds
1. Regenerate the cells during accidents, sport-related injuries.
2. When a natural muscle is not working, scaffolds are used as temporary templates.
3. Scaffolds are 3-dimensional structures made up of biomaterials (collagen, fibrin and PLA).
4. These are designed and used to support and guide the growth of cells, tissues, or organs in
human body.
5. The orientation and alignment of regenerated muscle cells are guided by the structure of
scaffold.
6. The structure of regenerated muscle fibers will be similar to structure of scaffold.
7. Scaffolds are porous structures with interconnected pore networks.
8. The porosity allows for the diffusion of nutrients, oxygen and waste products.
9. The surface properties of scaffolds are modified to incorporate seed cells, bioactive molecules
and growth factors.
10. These create a microenvironment for muscle action formation of new blood vessels and by
tissue remodeling.
Department of Chemistry, Sai Vidya Institute of Technology Page 2
Biology for Computer Engineers BBOC407
11. Scaffolds are used in regeneration of bone, cartilage, skin, nerves and organs.
Muscular dystrophy
Muscular dystrophy is a group of diseases that cause progressive weakness and loss of muscle mass.
1. It is a genetic disorder.
2. It is caused by a mutation in the dystrophin gene.
3. The main sign of muscular dystrophy is progressive muscle weakness.
4. It results in difficulty walking, frequent falls, difficulty rising from lying or sitting position,
trouble running and jumping etc.
Bioengineering solutions for muscular dystrophy
Bioengineering solutions for muscular dystrophy are briefly given below:
1. Gene Therapy: In Gene therapy mutated gene responsible for muscular dystrophy is replaced
by a functional gene. Also be used to modify the expression of genes with the genetic defect
causing muscular dystrophy.
2. Cell Therapy: In cell therapy, the damaged cells of muscle tissue are transplanted by healthy
muscle cells. Stem cells can be differentiated into muscle cells and implanted into affected
muscles. These cells have the potential to regenerate muscle fibers and improve muscle
strength and function.
3. Tissue Engineering: In this approach, stem cells or muscle precursor cells are seeded onto
bioengineered scaffolds. These scaffolds are then implanted into the affected muscle tissue.
The scaffold provides structural support and guidance for new tissue growth and their
integration into the host tissue.
Osteoporosis
Skeletal disorder in which there is decrease in bone mineral density and bone mass.
This can lead to a decrease in bone strength that can increase the risk of fractures (broken
bones).
Osteoporosis occurs when the body fails to form enough new bone, or when existing bone is
reabsorbed more quickly than it is replaced.
It is commonly seen in postmenopausal women and in older men. Fractures happen most often
in bones of the hip, vertebrae in the spine, and wrist.
The main causes of osteoporosis are:
a) Hormonal imbalances, particularly a decrease in estrogen levels in women after menopause.
b) Inadequate calcium and vitamin D intake and physical inactivity,
c) Smoking, and excessive alcohol consumption,
d) Taking certain steroidal medications.
Bioengineering solutions for Osteoporosis
Main bioengineering solutions for osteoporosis are briefly given below:
1. Use of scaffolds: Bioengineered scaffolds can be used to provide structural support and a three-
dimensional environment for bone regeneration. Seed cells are attached to scaffolds and allowed
proliferate and differentiate to produce new cells.
2. Use of Growth Factors and Bioactive Molecules: Growth factors and bioactive molecules
enhance bone formation. Growth factors are the molecules that can stimulate the proliferation and
differentiation of bone- forming cells and accelerate bone regeneration. Example for growth factors
is morphogenetic proteins (BMPs).
3. Use of cell therapies: Stem cells or seed cells can be isolated from various sources like bone
marrow and adipose tissue. These cells can be incorporated into scaffolds and implanted into bone
defect sites. At this site, they proliferate and differentiate to produce new cells and contribute to new
bone formation.
4. Delivering Drugs to target site: Bio engineering based modern targeted drug delivering systems
can be utilized to delivery drugs directly and specifically to osteoporosis site. These systems can
deliver medications, such as bisphosphonates or teriparatide, directly to the bone tissue.
Bioprinting techniques:
Department of Chemistry, Sai Vidya Institute of Technology Page 3
Biology for Computer Engineers BBOC407
Bioprinting techniques has emerged as a powerful tool for building tissue & organ structures in
the field of tissue engineering. The technique allows precise placement of cells, biomaterials &
biomolecules in spatially predefined locations within confined three-dimensional (3D) structures.
Developments in 3D bioprinting have been mostly motivated by the limited availability of organs
globally, which are needed for the rehabilitation of lost or failed organs and tissues. The most
challenging and demanding applications for engineered tissues include the skin, cartilage, hard
tissues such as bones, cardiac tissue, and vascular grafts.
In general, bioprinting can be defined as “the automated generation of biologically functional
products with structural organization from living cells, bioactive molecules, biomaterials, cell
aggregates such as microtissues, hybrid cell-material constructs through bioprinting”.
The three basic steps of bioprinting:
1. Pre-bioprinting: - This involves creating a digital file for the printer to read. Today, these files
are often based on CT and MRI scans. Researchers prepare cells and mix them with their bioink,
using a live-cell imaging system to ensure there are enough cells to bioprint a tissue model
successfully.
2. Bioprinting: - Researchers load the cell-laden bioink into a cartridge and choose one or multiple
printheads, depending on the structure they’re trying to build. Developing different types of tissue
requires researchers to use different types of cells, bioinks and equipment.
3. Post-bioprinting: - Most structures are crosslinked to become fully stable. Crosslinking is
usually done by treating the construct with either ionic solution or UV light – the construct’s
composition helps researchers determine what kind of crosslinking to use. Then the cell-filled
constructs are placed inside an incubator for cultivation.

Applications of bioprinting: -
Drug development:
Many of today’s studies rely on living subjects – an inconvenient and expensive method for both
academic and commercial organizations. Bioprinted tissues can be used instead during the early
stages, providing a more ethical and cost-effective solution. Using bioprinted tissue can help
researchers determine a drug candidate’s efficacy sooner, enabling them to save money and time.
Artificial organs:
The organ donation list is so long that patients wait years before getting the help they need. Being
able to bioprint organs could help clinicians keep up with patients or eliminate the list entirely.
While this solution is far down the line, it is one of the most impactful possibilities in the field.
Wound healing:
A lot of tissue-specific bioinks are available today, enabling researchers to work with artificial skin
cells, neurons, hepatocytes and more. One day, clinicians could use these models for therapeutic
procedures like skin grafts, bone bandages for combat wounds or even plastic surgery.

Types of bioprinting techniques: Bioprinting techniques can be broadly classified into 5 types as
follows.
1. Inkjet bioprinters.
2. Extrusion based bioprinters.
3. Laser-based bioprinters.
4. Stereolithography based bioprinter.
5. Microvalve bioprinters.
Inkjet bioprinters: - It is a form of droplet-based bioprinting, in which the bioink is dropped on
the stage in small portions. This working principle is the same as in some ink cartridge office
printers, and those can be easily modified for bioprinting.

Department of Chemistry, Sai Vidya Institute of Technology Page 4

Biology for Computer Engineers BBOC407
Principle of inkjet bioprinters:
✓ Inkjet bioprinting is based on the ejection of drops of liquid onto a substrate by thermal or
acoustic forces.
✓ Thermal inkjet bioprinting can be achieved by electrically heating the print head to
generate pressure that causes the release of droplets from the nozzle.
✓ In the case of acoustic inkjet bioprinting, a piezoelectric crystal is used that creates an
acoustic wave inside the print head to break the liquid into droplets.
✓ When a voltage is applied to a piezoelectric substance, a rapid change in shape is induced.
This, in turn, generates pressure required to force droplets out of the nozzle.
✓ Both of these methods have their own advantages and disadvantages; thus, the selection of
inkjet bioprinting technology should be made based on the desired purpose.

Examples of inkjet based bioprinting

1. Some of the common applications of inkjet bioprinting are the regeneration of functional skin
and cartilage tissues where the high printing speed of this technique enables direct deposition
of cells and biomaterials onto skin and cartilage lesions.
2. Besides, inkjet bioprinting also allows the deposition of primary or stem cells with uniform
density onto lesions while maintaining cell viability and function.
3. Layered cartilage constructs have also been developed using a combination of inkjet bioprinting
and electrospinning technology.

Extrusion based bioprinters: - In this, the bioink is extruded through a nozzle tip by pressure. The
bioink extrudes as a continuous filament and is printed layer-by-layer on top of a substrate placed
on the stage.
Principle of extrusion based bioprinters:
✓ The extrusion-based 3D bioprinting utilizes one of the two mechanisms to produce the
desired result; the semi-solid extrusion (SSE) and the fused deposition modeling (FDM)
based 3D printing.
✓ In the SSE based 3D bioprinting, pressurized air or rotating screw gear is used to extrude a
continuous stream of semi-solid materials through a nozzle which is deposited in a layer-
by-layer fashion to form a 3D structure.
✓ The FDM 3D bioprinting, however, utilizes high temperature to melt thermoplastic
filaments which are then extruded through a nozzle to deposit in a layer-by-layer fashion to
produce a 3D structure.
✓ The two principal components of all extrusion-based 3D printers include the extrusion
system and the positioning system; thus, both of these systems should be accurate enough
to produce a visually and geometrically accurate structure.

Department of Chemistry, Sai Vidya Institute of Technology Page 5

Biology for Computer Engineers BBOC407

Examples of extrusion based bioprinting

1. The extrusion-based 3D bioprinting method has been widely used in various biomedical sectors
ranging from the pharmaceutical industry to research sectors.
2. The technology is commonly used for single tissue applications, and to manufacture scaffolds
that mimic tissue interfaces.
3. The technology is capable of producing models that mimic soft tissues and bone structures
which provide an opportunity for possible implants.

Laser based bioprinters: In this, the bioink is stored in a donor slide. On top of the donor slide and
in direct contact with it is an energy absorbing layer. When a strictly controlled laser is pulsated
into the absorbing layer, the shockwave from the laser separates a droplet of bioink from the donor
slide. The droplet then falls to the collector slide due to gravity.
Principle of laser based bioprinters:
✓ The principle of laser-assisted bioprinting is the use of the laser to induce forward transfer
of biomaterials onto a solid surface.
✓ The laser present on the printer irradiates the ribbon, which causes the liquid biomaterial to
evaporate and reach the receiving substrate in droplet form.
✓ The receiving substrate consists of biopolymers or a cell culture medium which assists
cellular adhesion and sustained growth of the biomaterial.

Examples of Laser-assisted bioprinting:

1. Laser-assisted bioprinting has been used to produce a cellularized skin constructs with
relevant cell densities in a layered tissue construct.
2. Cells of the human dermal fibroblasts, pulmonary artery endothelial cells, and breast
cancer cells can be produced via laser-assisted bioprinting.

Department of Chemistry, Sai Vidya Institute of Technology Page 6

Biology for Computer Engineers BBOC407
Stereolithography based bioprinter: The stereolithography technique has the highest fabrication
accuracy, and a large number of materials can be used in the process. The technique utilizes light-
sensitive hydrogels that are deposited in a layer-by-layer fashion to form a 3D structure. The speed
of this method is very fast (about 40,000 mm/s) with cell viability of more than 90%.
Principle of stereolithography based bioprinters:
✓ Stereolithography technology is based on the solidification of the liquid photosensitive
polymer upon illumination.
✓ The technology utilizes digital micromirror arrays to control the light intensity to
polymerize light-sensitive polymer materials.
✓ The photochemical solidification of biopolymers results in the formation of layers that
together form a 3D object.

Examples stereolithography based bioprinters:

This technique has been used in several ways to produce tissues and organs of different animals,
including humans.
Besides, the technique was tested upon on DNA material, but the use of UV light has chances of
affecting the DNA structure. However, a custom light source can be prepared to use with DNA
molecules.
Microvalve bioprinters: The microvalve-based bioprinting system is an advanced manufacturing
platform that facilitates the precise deposition of bio-inks with moderate viscosities and the four
key parameters that influence the printability include viscosity, density and surface tension of the
printable bio-inks.
Principle of microvalve bioprinters:
✓ Microvalve printing is a simple droplet-based deposition mechanism, where fluids under
constant pneumatic pressure are dispensed from tips by opening and closing a small valve,
which can be controlled mechanically, electrically or magnetically.
✓ This style of deposition has been implemented in extrusion-style printing as outlined above,
where the microvalve remains open for extended periods, but finds most application in drop
on-demand deposition by fast actuation of the microvalve.
✓ The tips are usually 100-200 µm in diameter, and are capable of dispensing droplets with
volumes ranging from tens of nanolitres to several micro-litres, from inks with relatively
low viscosities (1-20 mPa. s).

Department of Chemistry, Sai Vidya Institute of Technology Page 7

Biology for Computer Engineers BBOC407

Electronic tongue (E- tongue) in food science: Electronic tongue, also known as E-tongue, is an
analytical instrument that mimics the human tongue's sense of taste and is used in food science to
analyze the taste and flavor of different food products.
Working and components of E-tongue:
1. Sensor Array: The tongues sensor array is the heart of the instrument consisting of several
sensors that are sensitive to specific taste related chemicals such as salt, some sweetness
bitterness. Each sensor is designed to respond to a particular chemical or group of chemicals
and together they can provide a comprehensive profile of the use and flavorof a food
sample
2. Sample Holder: The sample holder is the part of the tongue that holds the food sample
during testing. It is typically made of a material that is inert and does not interact with the
food sample, such as glass or plastic.
3. Signal Processor: The tongue's signal processor is responsible for analyzing the electrical
signals generated by the sensor array in response to the food sample. It converts these signals
into a profile of the taste and Savor of the simple, which can be displayed on a computer
screen or other output device.
4. Data Analysis Software: The tongue's data analysis software is used to interpret the data
generated by the signal processor and create a profile of the taste and flavor of the food
sample. This software can be customized to suit the specific needs of a particular application
or industry,

Department of Chemistry, Sai Vidya Institute of Technology Page 8

Biology for Computer Engineers BBOC407
5. Calibration Solutions: To ensure accurate and reliable results, E-tongue, require regular
calibration using standardized solutions with known taste and flavor characteristics.

Electronic tongue (E- nose) in food science: An electronic nose, also known as an E-nose, is an
analytical instrument that mimics the human sense of smell and is used to identify and analyze the
aroma or odor of different substances. The e-nose consists of a sensor array that is capable of
detecting and quantifying different volatile organic compounds (VOCs) based on their chemical
composition.
Working and components of E-nose: The E-nose is an analytical instrument that works by
detecting and analyzing the volatile organic compounds (VOCs) present in a sample.
1. Sensor Array: The e-nose's sensor array is composed of several sensors that are sensitive
to specific VOCs. Each sensor is designed to respond to a particular chemical or group of
chemicals, and together they can provide a comprehensive profile of the aroma. or odor of
a sample.
2. Sample Delivery System: The sample delivery system is used to introduce the sample into
the e-nose. Depending on the type of sample, the delivery system can vary, but it typically
involves exposing the sample to the sensor array through an inlet port.
3. Signal Processing System: The e-nose's signal processing system is responsible for
analyzing the electrical signals generated by the sensor array in response to the sample.
The system converts these signals into a profile of the aroma or odor of the sample, which
can be displayed on a computer screen or other output device.
4. Data Analysis Software: The e-nose's data analysis software is used to interpret the data
generated by the signal processing system and create a profile of the aroma or odor of the
sample. This software can be customized to suit the specific needs of a particular application
or industry.
5. Calibration Solutions: To ensure accurate and reliable results, e-noses require regular
calibration using standardized solutions with known aroma or odor characteristics.
Calibration solutions can be used to verify the performance of the instrument and ensure that
it is operating within the desired range of accuracy and precision.

DNA ORIGAMI
DNA Origami is a technique in nanotechnology that involves folding DNA molecules into
specific shapes.
The process involves using a long, single strand of DNA, called the scaffold, to guide the folding
of short, complementary DNA strands, called staples, into a desired shape.

Department of Chemistry, Sai Vidya Institute of Technology Page 9

Biology for Computer Engineers BBOC407
The first DNA origami structures were developed in the mid-2000s and since then, the technique
has been widely used in a variety of applications, including the creation of nanoscale structures, the
study of molecular interactions, and the development of new drug delivery systems.

Technological Importance of DNA Origami

The technological importance of DNA origami lies in its potential to be used in a wide range of
applications, including nanotechnology, materials science, and biomedicine.
Some of the key ways in which DNA origami can impact technology include:
1. Nanoscale manufacturing: DNA origami can be used as a template for the preciseassembly
of nanoscale structures, which have applications in areas such as electronics, photonics, and
materials science.
2. Drug delivery: DNA origami can be used to develop new approaches for drug delivery, as
it can be designed to carry therapeutic agents directly to specific cells or tissues.
3. Biosensors: DNA origami can be used to develop new biosensors that can detect specific
biological molecules and signals in real-time.
4. Biomedical imaging: DNA origami can be used as a tool for biomedical imaging, as it can
be designed to target specific cells or tissues and provide high-resolution images.
5. Gene therapy: DNA origami can be used as a delivery vehicle for gene therapy, as it can
be programmed to target specific cells and deliver therapeutic genes to those cells.
6. Biocatalysis: DNA origami can be used to develop new approaches for biocatalysis, as it
can be designed to perform specific chemical reactions and act as a catalyst.
7. Nanopatterning: DNA origami can be used as a tool for nanopatterning, as it can be
programmed to arrange and position nanoscale structures with precise control.

BIO-COMPUTING
• Bio-computing refers to the use of biological systems, such as cells, enzymes, and DNA, for
computing and information processing.
• This field combines the principles of computer science, biology, and engineering to create
novel systems for computing and data storage.

Technological Importance
1. Computational power: Bio-computing systems have the potential to provide new levels
of computational power, as they can perform complex tasks and calculations using
biological processes.
2. Data storage: Bio-computing systems can be used to store and process large amounts of
data, as DNA has a high information density [consider that a single gram of DNA can
theoretically store up to 215 petabytes (1 petabyte = 1 million gigabytes) of data] and can
be easily synthesized and amplified.
3. Medical applications: Bio-computing systems can be used to develop new diagnostic and
therapeutic approaches in medicine, such as biosensors and gene therapies.
4. Environmental monitoring: Bio-computing systems can be used to monitor and track
environmental conditions, such as air and water quality, in real-time.
5. Energy efficiency: Bio-computing systems are energy-efficient, which is becoming
increasingly important as we face the challenge of climate change and the need to reduce
our energy consumption.
6. Robustness: Bio-computing systems are highly robust, as they are less susceptible to errors
and failures compared to traditional electronic systems.
7. Versatility: Bio-computing systems can be programmed and reprogrammed to perform
different tasks, which makes them highly versatile and adaptable.

Department of Chemistry, Sai Vidya Institute of Technology Page 10

Biology for Computer Engineers BBOC407
BIO-IMAGING FOR DISEASE DIAGNOSIS
Bio-imaging is the use of imaging technologies to visualize biological processes and
structures in living organisms.
It plays a crucial role in disease diagnosis by providing detailed images of the body's
internal structures and functions, and can help healthcare professionals to identify and
diagnose a wide range of diseases and conditions.
Examples of Bioimaging Techniques Some examples of bioimaging techniques used for
disease diagnosis include X-rays, CT scans, MRI, PET scans, ultrasound, and optical
imaging.
These technologies can be used to visualize a wide range of structures and functions,
including bones, tissues, organs, blood vessels, and more.

Technological Importance
The technological importance of bio-imaging for disease diagnosis lies in its ability to
provide detailed images of the body's internal structures and functions, which can help
healthcare professionals to make accurate diagnoses and provide effective treatments.
1. Improved accuracy: Bio-imaging technologies can provide high-resolution images of the
body's internal structures, which can help healthcare professionals to identify subtle changes
and make accurate diagnoses.
2. Early detection: Bio-imaging can be used to detect diseases in their early stages, when they
are often more treatable. This can lead to earlier treatment and better outcomes for patients
3. Multi-modality: Bio-imaging technologies can be combined to provide a multi-modal view
of the body's internal structures and functions, which can provide a more comprehensive
understanding of a disease or condition.
4. Cost-effectiveness: Many bio-imaging technologies are relatively low-cost, which makes
them accessible to a wider range of patients.
5. Minimally invasive: Many bio-imaging techniques are non-invasive, which means that they
do not require incisions or the insertion of instruments into the body. This makesthem
less painful and less risky than many traditional diagnostic procedures.
6. Improved patient outcomes: By providing healthcare professionals with detailed images
of the body's internal structures and functions, bio-imaging can help to improve patient
outcomes by enabling earlier and more accurate diagnoses, and more effective treatments.
7. Advancements in research: Bio-imaging technologies are also important in advancing
medical research, by providing detailed images of the body's internal structures and
functions, which can help researchers to better understand the underlying mechanisms of
diseases and develop new treatments.

ARTIFICIAL INTELLIGENCE FOR DISEASE DIAGNOSIS

Artificial Intelligence (AI) has the potential to revolutionize the field of disease diagnosis
by providing healthcare professionals with more accurate and efficient tools for identifying
and treating various conditions
Advantages
Image analysis: AI algorithms can analyze medical images, such as X-rays, CT scans, and
MRIs, to detect signs of diseases. For example, AI algorithms can identify patterns in
medical images that may indicate the presence of a particular condition, such as a tumor or
an injury. This type of image analysis is known as computer-aided diagnosis (CAD).
Data analysis: AI algorithms can analyze large amounts of patient data, such as electronic
health records, to identify patterns and trends that may indicate a disease. This type of data
analysis is known as predictive analytics.

Department of Chemistry, Sai Vidya Institute of Technology Page 11

Biology for Computer Engineers BBOC407
Diagnosis: AI algorithms can be used to diagnose diseases by evaluating symptoms, test
results, and other patient information. AI algorithms can help healthcare professionals make
faster and more accurate diagnoses, reducing the risk of misdiagnosis.
Personalized medicine: AI algorithms can be used to create personalized treatment plans
for patients based on their specific medical histories, lifestyles, and other factors. For
example, AI algorithms can analyze a patient's medical history, lifestyle habits, and genetic
information to recommend the best course of treatment for their condition.
Clinical decision support: AI algorithms can be integrated into electronic health records to
provide healthcare professionals with real-time decision-making support. For example, AI
algorithms can provide physicians with information about the best diagnostic tests to order,
the most effective treatments to consider, and the best ways to manage patient care.

Limitations
Lack of understanding of the underlying algorithms: AI algorithms can be complex and
difficult to understand, making it difficult for healthcare professionals to interpret the results.
This can lead to confusion and mistrust of AI-based tools, particularly among healthcare
professionals who are not familiar with AI technology.
Bias: AI algorithms may be biased, leading to inaccurate or unfair diagnoses. For example,
if an AI algorithm is trained on data from a predominantly male population, it may not
accurately diagnose conditions that affect women differently.
Regulation: The use of AI in healthcare is heavily regulated, and it can be challenging to
get approval for new AI technologies. In many countries, AI algorithms must undergo a
rigorous evaluation process before they can be used in healthcare.
Cost: The development and implementation of AI algorithms can be expensive, which may
limit access to these technologies for some patients and healthcare facilities. This is
particularly true in low- and middle-income countries, where access to healthcare isalready
limited.

SELF-HEALING BIO-CONCRETE
Self-healing bio-concrete is a type of concrete that incorporates microorganisms, such as
Bacillus fragments, into the mixture, along with calcium lactate as a nutrient source.
The microorganisms are activated when the concrete cracks, and they produce calcium
carbonate, which fills in the cracks and repairs the concrete.
This process is known as bio-mineralization.
The benefits of self-healing bio-concrete include increased durability, reduced maintenance
costs, and improved sustainability, as the concrete is able to repair itself without the need
for human intervention.
Additionally, because the microorganisms used in the concrete are naturally occurring and
non-toxic, self-healing bio-concrete is considered to be environmentally friendly.
Self-healing bio-concrete is still a relatively new technology and is currently in the research
and development phase.
However, initial studies have shown promising results and have demonstrated the potential
for self-healing bio-concrete to be a viable alternative to traditional concrete in certain
applications.
Self-healing bio-concrete works by incorporating Bacillus bacteria into the concrete
mixture, along with calcium lactate as a nutrient source.
The bacteria are dormant within the concrete and do not become active until the concrete
cracks When the concrete cracks, water and oxygen enter the crack and activate the Bacillus
bacteria.

Department of Chemistry, Sai Vidya Institute of Technology Page 12

Biology for Computer Engineers BBOC407
The bacteria then produce calcium carbonate, which is a type of mineral that is commonly
found in natural stone.
The calcium carbonate acts as a binder and fills in the cracks, repairing the concrete and
restoring its structural integrity. This process is known as biomineralization.
The Bacillus bacteria used in self-healing bioconcrete are naturally occurring and nontoxic,
so they are considered to be environmentally friendly.
They are also able to survive in a wide range of temperatures and pH levels, making them
well-suited for use in concrete.
In addition to repairing cracks, self-healing bioconcrete also has the potential to improve the
overall durability of concrete by reducing the amount of water that is able to penetrate the
surface.
This can help to prevent the development of further cracks and increase the longevity of the
concrete.

Self-healing Process process:

1. Mix Bacillus bacteria and calcium lactate with concrete
2. Bacteria remain dormant within the concrete
3. Concrete cracks
4. Water and oxygen enter the crack
5. Bacteria become activated
6. Activated bacteria produce calcium carbonate
7. Calcium carbonate fills in the cracks
8. Concrete is repaired and structural integrity is restored

BIOREMEDIATION AND BIOMINING VIA MICROBIAL SURFACE ADSORPTION

(Removal of heavy metals like Lead, Cadmium, Mercury, Arsenic)
Bioremediation and biomining are two related but distinct processes that utilize living
organisms to clean up contaminated environments or extract valuable minerals, respectively.
Bioremediation refers to the use of microorganisms, plants, or animals to clean up
contaminated environments, such as soil, water, or air.
This process occurs naturally over time, but can also be accelerated through the addition of
specific microorganisms or other biotic agents.
The goal of bioremediation is to remove contaminants from the environment and restore it
to a healthy state.
Biomining, on the other hand, refers to the use of microorganisms to extract valuable
minerals from ore deposits.
This process involves the use of microorganisms to dissolve minerals from ore, creating a
solution that can be separated and purified to obtain the valuable minerals.
Biomining is often used in the extraction of metals such as copper, gold, and nickel, and has
several advantages over traditional mining methods, including lower energy costs, reduced
waste, and increased metal recovery.
Bioremediation and biomining via microbial surface adsorption is a process that utilizes
microorganisms to remove heavy metals like lead, cadmium, mercury, and arsenic from
contaminated environments or ore deposits, respectively.
The process of removing polluting heavy metals using bioremediation or biomining via
microbial surface adsorption.

Department of Chemistry, Sai Vidya Institute of Technology Page 13

Biology for Computer Engineers BBOC407
Process of removing polluting heavy metals using bioremediation
Identification of heavy metal-contaminated site: Identify the site or area contaminated
with heavy metals, such as soil, water, or industrial waste sites.
Isolation and characterization of metal-resistant microbial strains: Select and isolate
microbial strains that have demonstrated resistance to heavy metals. These can include
bacteria, fungi, or archaea.
Culturing and enrichment of microbial strains: Culture and propagate the selected
microbial strains in a suitable growth medium under laboratory conditions. This step aims
to obtain a sufficient quantity of active microbial biomass for subsequent applications.
Preparation of microbial suspension: Harvest the microbial biomass and prepare a
suspension by suspending the biomass in a carrier solution, such as water or a nutrient broth.
This suspension will serve as the delivery system for the microbes during application.
Application of microbial suspension to the contaminated site: Apply the microbial
suspension to the heavy metal-contaminated area. This can be done through spraying,
injection, or soil/water mixing, depending on the specific site conditions.
Microbial adsorption and sequestration of metal: The applied microbial strains adsorb
to the surfaces of metal particles or form biofilms. Through their metabolic activity, the
microbes produce extracellular compounds such as organic acids or biofilm matrix
components that have an affinity for binding metal ions.
Separation or removal of metals from the contaminated site can achieved through different
methods

Methods used for the Separation or Removal of Metals

After the steps of microbial adsorption and sequestration of heavy metals, the subsequent
separation or removal of metals from the contaminated site can be achieved through
different methods.
Phytoremediation: In this method, plants are used to remove heavy metals from the soil
or water. The metal accumulating ability of certain plant species, called hyperaccumulators,
allows them to take up metals from the environment and store them in their tissues. After
the plants have absorbed the metals, they can be harvested and disposed of properly,
effectively removing the metals from the site.
Chemical extraction: Chemical agents can be applied to the contaminated area to facilitate
the release of heavy metals from the microbial biomass or the surroundingmatrix.
Chelating agents, such as ethylenediaminetetraacetic acid (EDTA) or citric acid, can be used
to form complexes with the metals, increasing their solubility and facilitating their removal.
Biosorption: In this method, the metal-loaded microbial biomass or biofilms can be
harvested and separated from the site. The biomass can then be processed to recover the
metals through techniques such as acid leaching or thermal treatment. The metals can be
further purified or recycled for various industrial applications.
Physical removal: In some cases, physical methods such as sedimentation, filtration, or
membrane separation can be employed to separate the metal-loaded microbial biomass or
biofilms from the surrounding environment. These techniques rely on the physical
properties of the biomass or biofilms, such as size, density, or adsorption capacity, to
separate them from the water or soil.
Electrochemical methods: Electrochemical techniques, such as electrokinetic remediation
or electrocoagulation, can be utilized to remove heavy metals from the contaminated site.
These methods involve the application of an electric field or the

Department of Chemistry, Sai Vidya Institute of Technology Page 14

Biology for Computer Engineers BBOC407
generation of metal precipitates through electrochemical reactions, resulting in the
migration or precipitation of metal ions, which can then be collected and removed.

Department of Chemistry, Sai Vidya Institute of Technology Page 15