2/10/24, 1:59 a.m.

VoltEdge Wireless Headset User Guide

Manuals+ — User Manuals Simplified.

VoltEdge Wireless Headset User Guide

Home » VoltEdge » VoltEdge Wireless Headset User Guide

VoltEdge Wireless Headset

https://manuals.plus/voltedge/wireless-headset-manual 1/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

https://manuals.plus/voltedge/wireless-headset-manual 2/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

Contents
1 PACKAGE CONTENTS
2 FEATURES AND CONTROLS
3 SETUP
4 SYSTEM SETTINGS : PLAYSTATION®4
5 SYSTEM SETTINGS : WINDOWS
6 SYSTEM SETTINGS : MAC
7 SYSTEM SETTINGS : NINTENDO SWITCH™
8 SYSTEM SETTINGS : MOBILE/ XBOX ONE™
9 CHARGING
10 PAIRING
11 CE
12 PRECAUTIONS
13 Documents / Resources
13.1 References
14 Related Posts

PACKAGE CONTENTS

1. TX-70 WIRELESS RF STEREO GAMING HEADSET

2. Wireless Transmitter (USB)
3. Micro USB Charging Cable
4. 3.5mm Audio Cable

https://manuals.plus/voltedge/wireless-headset-manual 3/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

5. QuickStart Guide

https://manuals.plus/voltedge/wireless-headset-manual 4/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

FEATURES AND CONTROLS

Input power rating DC 5V, 1A

Battery type bu1lt-1n LI-ion Polymer battery
Voltage DC 3 7V
Battery capacity 120DmAh
Operating temperature 0~+45°C
Mass Approx 320g

https://manuals.plus/voltedge/wireless-headset-manual 5/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

EQ
BASS BOOST
Press the EQ button to turn Bass Boast on/off
A short pause 1n sound will occur when changing modes

SETUP

1. Connect the Wireless Transmitter to the USB port

2. Power on the headset
3. Go to the “System Settings” section for your system

https://manuals.plus/voltedge/wireless-headset-manual 6/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

SYSTEM SETTINGS : PLAYSTATION®4

1. Go to “Settings”
2. Select “Devices” then “Audio Devices”
3. Set “Input and Output Device” to “TX70”
4. Select “Adjust Microphone Level” and follow the directions to calibrate your microphone
5. Adjust “Volume Control” to maximum level
6. Set “Output to Headphones” to “All Audio”

SYSTEM SETTINGS : WINDOWS

1. Right click the sound icon on the Windows task bar

https://manuals.plus/voltedge/wireless-headset-manual 7/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

2. Go to “Sounds” or “Sound Settings”

3. Under “Playback” click on “TX70” and select “Set Default”
4. Under “Recording” click on “TX70” and select “Set Default”

SYSTEM SETTINGS : MAC

1. Go to “System Preferences”
2. Select “Sound”
3. Under “Output” select “TX70”

https://manuals.plus/voltedge/wireless-headset-manual 8/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

4. Under “Input” select “TX70”

SYSTEM SETTINGS : NINTENDO SWITCH™

The TX70 supports Game and Chat audio on the Nintendo Switch™
To chat through the “Nintendo Switch™ Online” app, connect the 3.5mm cable into the headset, and the
other end into the mobile device
Game audio will come in from the Wireless Transmitter, while chat audio will come via the mobile device

https://manuals.plus/voltedge/wireless-headset-manual 9/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

Chat audio on the Nintendo Switch™ only works with games that support in-game chat

SYSTEM SETTINGS : MOBILE/ XBOX ONE™

1. Plug in the 3.5mm cable into the headset, and the other end into the mobile device or controller

https://manuals.plus/voltedge/wireless-headset-manual 10/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

2. Adjust volume output in system settings

All buttons are disabled in 3.5mm mode, however the mic flip-to-mute function is active

CHARGING

1. Connect the Charging Cable into a functioning USB A port, and the
Micro USB end into the headset

Important Information

Before first using the TX70 Wireless Gaming Headset make sure the device is fully charged
Charging requires a USB 2.0 port or newer

https://manuals.plus/voltedge/wireless-headset-manual 11/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

When charging, the LED light on the headset will slowly pulse
LED pulses when charging, LED in solid light when fully charged.
LED blinks when low battery

PAIRING

The TX70 Wireless is initially paired with the Wireless Transmitter To pair, follow the below steps

1. On the Wireless Transmitter press and hold the pairing button, the LEO will quickly blink
2. On the headset use a paperclip, or something similar, to press and hold the pairing button while it is powered
on. The LEO on the earcup will quickly blink until paired

https://manuals.plus/voltedge/wireless-headset-manual 12/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

CE

Good better best Ltd hereby declares that this product is in compliance with the essential requirements and
other provisions of EMC Directive 2014/30/EC and RED directive 2014/53/EU

PRECAUTIONS

Before using the headset, turn the volume down to a mid-level or very low, then slowly
adjust it to a comfortable level. Exposure to high volume sound levels may cause

https://manuals.plus/voltedge/wireless-headset-manual 13/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

temporary or permanent damage to your hearing. You should always set your volume to moderate levels
and avoid long exposure to high volume levels.

Contains small parts. Not suitable for children under 7 years of age. An adult should supervise young children
when using this product.
Store in a dry 6 dust free area.
Avoid placing this product near extreme temperatures or humidity. Avoid direct sunlight and heat sources.
Do not submerse or allow this product to come into contact with water. Use in dry locations only.
Do not clean any parts with alcohol, cleaning solutions containing alcohol or strong abrasives. Use a soft cloth
and a little water.
Do not use this product while operating a motor vehicle
There are no user serviceable parts within this product. Tampering with this product will invalidate your
Gioteck warranty.
Use of any attachment or accessory with this product not recommended or sold by Gioteck may result in risk
of fire, electrical shock or injury to persons or product.
Please help to conserve the environment by recycling the cardboard packaging of this product.
This product should NOT be disposed of in normal household waste. It should be disposed of separately.
Please take it to an electrical waste collection point.

This product is covered by a one [1] year warranty.

https://manuals.plus/voltedge/wireless-headset-manual 14/15
2/10/24, 1:59 a.m. VoltEdge Wireless Headset User Guide

For full Terms and Conditions, and for Technical Assistance, go to: [email protected] Activate your product
warranty: gioteck.com/register

For help with the set-up or operation of this product please

goto: [email protected]

Documents / Resources

VoltEdge Wireless Headset [pdf] User Guide

Wireless Headset, TX70, Wireless RF Stero Gaming Headset

References

User Manual

Manuals+, Privacy Policy

This website is an independent publication and is neither affiliated with nor endorsed by any of the trademark owners. The "Bluetooth®" word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. The "Wi-Fi®" word mark and logos are registered trademarks owned by the Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation with or
endorsement.

https://manuals.plus/voltedge/wireless-headset-manual 15/15