OWNER’S MANUAL

LG Gaming Monitor
(LED Monitor*)

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and
retain it for future reference.

34GK950G
www.lg.com

Copyright © 2018 LG Electronics Inc. All Rights Reserved.

 TABLE OF CONTENTS LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.

LICENSE....................................................... 2
ENGLISH

ASSEMBLING AND PREPARING................... 3

The terms HDMI and HDMI High-Definition Multimedia Interface,
USING THE MONITOR................................. 10 and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
USER SETTINGS......................................... 12

TROUBLESHOOTING.................................. 18

PRODUCT SPECIFICATION.......................... 20
The SuperSpeed USB Trident logo is a registered trademark of USB
Implementers Forum, Inc.

© 2017 NVIDIA Corporation. All rights reserved. NVIDIA G-SYNC are

registered trademarks of NVIDIA Corporation in the U.S and other
countries.

2
ASSEMBLING AND PREPARING Supported Drivers and Software
You can download and install the latest version from the enclosed CD or from the LGE website (www.lg.com).
CAUTION Drivers and Software Installation Priority

ENGLISH
•• Always use genuine LG components to ensure safety and product performance. Monitor Driver Recommended
•• The product warranty will not cover damage or injury caused by the use of unauthorized components.
OnScreen Control Recommended
•• It is recommended that use the supplied components.
•• If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•• Illustrations in this document represent typical procedures, so they may look different from the actual product.
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.

NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•• The power cord provided may differ depending upon the region.

3
 Product and Button Description
ENGLISH

Lighting

Lighting Button

Joystick Button / Power LED

•• On: Power on
•• Off: Power off

4
How to Use the Joystick Button How to Use the Lighting Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/ You can easily control the functions of the monitor by pressing the lighting button or moving it left/right with
down with your finger. your finger.

Basic Functions Basic Functions

ENGLISH
When Lighting is Off When Lighting is On
Press the joystick button once with your finger to
Power on
turn on the monitor. Press the lighting button once Pressing the lighting button
with your finger to turn on enables you to change the lights
the lighting on the back of the on the back of the monitor to
Press and hold the joystick button once more than monitor. eight different colors.
Power off
5 seconds with your finger to turn off the monitor.
Press and hold the lighting Press and hold the lighting
button once with your finger to button once with your finger to
You can control the volume by moving the joystick turn on the lighting on the back turn off the lighting on the back
/ Volume control of the monitor. of the monitor.
button left/right.
Not functional You can control the lighting
brightness by moving the
Controls screen You can control the screen’s brightness by moving lighting button left/right.
/ brightness the joystick button up/down.
NOTE
•• The joystick and lighting button are located at the bottom of the monitor.
•• The Lighting function for the back of the monitor is available even when the monitor is in power saving mode
or when its screen is off.

5
 Moving and Lifting the Monitor Installing on a Table
•• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.9 inches)
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or away from the wall to ensure sufficient ventilation.
damaged and to ensure safe transportation, regardless of its shape or size.
•• Place the monitor in the original box or packing material before attempting to move it.
ENGLISH

•• Before moving or lifting the monitor, disconnect the power cord and all other cables.
100 mm
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself. (3.9 inches) 100 mm
•• When holding the monitor, the screen should face away from you to prevent it from being scratched. (3.9 inches)
•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways. 100 mm
(3.9 inches) 100 mm
(3.9 inches)

CAUTION CAUTION
•• Avoid touching the monitor screen as much as possible. •• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
-- This may result in damage to the screen or some of the pixels used to create images. •• Make sure to use the power cord that is provided in the product package and connect it to a grounded power
•• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become outlet.
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick •• If you need another power cord, please contact your local dealer or the nearest retail store.
button to malfunction.

6
Adjusting the Stand Height WARNING
1 Place the monitor mounted on the stand base in an upright position. •• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
2 Handle the monitor with both hands for safety.
•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

ENGLISH
Max. 110.0 mm (4.3 inches)

WARNING
•• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
NOTE
Adjusting the Angle
•• Swivel 20 degrees to the left or right and adjust the angle of the monitor to suit your view.
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing 20 20
experience.

15 -5

7
 Using the Kensington Lock Installing the Wall Mount Plate
The connector for the Kensington security system is located at the bottom of the monitor. This monitor meets the specifications for the wall mount plate or other compatible devices.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com. NOTE
Connect the monitor to a table using the Kensington security system cable. •• The wall mount plate is sold separately.
ENGLISH

•• For more information on installation, refer to the wall mount plate’s installation guide.
•• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.

Installing on the Wall

Install the monitor at least 100 mm (3.9 inches) away from the wall and leave about 100 mm (3.9 inches) of space
at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained
from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall
mounting bracket.

100 mm
(3.9 inches)

NOTE
100 mm
•• The Kensington security system is optional. You can obtain optional accessories from most electronics stores. (3.9 inches) 100 mm
(3.9 inches)

100 mm
(3.9 inches)

8
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. CAUTION
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. •• Unplug the power cord before moving or installing the monitor to avoid electric shock.
•• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
Wall Mount (mm) 100 x 100
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
Standard screw M4 x L10

ENGLISH
•• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
Number of screws 4 instructions.
Wall Mount Plate (Optional) RW120 •• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•• When measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches)
or less.
Wall Mount Plate

NOTE Back of the Monitor

•• A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain optional accessories from your local dealer. Wall Mount Plate
•• The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product. Back of the Monitor
•• For more information, please refer to the user manual for the wall mounting bracket.
Standard screw
: M4 x L10

Max. 8 mm (0.3 inches)

9
 USING THE MONITOR DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.
•• Illustrations in this manual may differ from the actual product. NOTE
Press the joystick button, go to Settings Input, and then select the input option. •• There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
ENGLISH

CAUTION •• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this may cause the device to
malfunction.
•• Do not press the screen for a prolonged time. This may cause image distortion.
•• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
•• Do not display a still image on the screen for a prolonged time. This may cause image retention.
cable or gender that supports DisplayPort1.2. (Sold separately)
Use a PC screensaver if possible.
•• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet. Connecting AV Devices
•• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
Connecting to a PC NOTE
•• This monitor supports the *Plug and Play feature. •• In HDMI input, only the RGB 4:4:4 Color Format is supported. YCbCr (YUV) is not supported.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
anything or install any manual drivers. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
HDMI Connection •• Recommended HDMI cable types
Transmits digital video and audio signals from your PC to the monitor. -- High-Speed HDMI®/TM cable
CAUTION -- High-Speed HDMI®/TM cable with Ethernet

•• In HDMI input, only the RGB 4:4:4 Color Format is supported. YCbCr (YUV) is not supported.
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet

10
Connecting Peripherals CAUTION
•• Cautions when using a USB device
USB Device Connection -- A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
The USB port on the product functions as a USB hub.
-- Some USB devices may not be supported or may not work properly.

ENGLISH
To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC.
-- It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
Peripheral devices connected to the USB IN port can be controlled from the PC. adequate, the USB device may not be recognized properly.)
NOTE
Headphones Connection
•• It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to the
product for use. Connect peripherals to the monitor via the headphones port.
•• Peripheral devices are sold separately. NOTE
•• A keyboard, mouse, or USB device can be connected to the USB port. •• Peripheral devices are sold separately.
•• The charging speed may vary depending on the device. •• Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•• If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.

(Sold separately)

Angled Straight
(Recommend)

Service only port

This port is used only for 'Service'.

11
 USER SETTINGS
NOTE
ENGLISH

•• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Activating the Main Menu

1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down and left/right to set the options.
3 Press the joystick button once more to exit the main menu.

Joystick Button

Button Menu Status Description

Main menu disabled Enables the main menu.
Exits the main menu.
Main menu enabled
(Holding down the button more than 5 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Input features.
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Settings feature.
Main menu disabled Adjusts the monitor brightness level.
Main menu enabled Turns off the monitor.
Main menu disabled Adjusts the monitor brightness level.
Main menu enabled Enters the Game Mode feature.

12
Main Menu Features

Main Menu Description

Power Off Input Sets input mode.

ENGLISH
Power Off Turns off the monitor.

Settings Configures the screen settings.

Input Close Settings
Game Mode Sets the game mode for gaming.

Close Closes the main menu.

Game Mode

Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
2 Move the joystick up/down and left/right to set the options.
3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to until you exit.

Game Mode Game Adjust Picture Adjust Input General

13
 Game Mode
Settings > Game Mode Description
Gamer 1 In Gamer 1 and Gamer 2 mode, you can save customized settings for Black Stabilizer and Response Time.
ENGLISH

Gamer 2 Select the desired mode for use.

Game Mode FPS This mode is optimized for FPS games. It is suitable for very dark FPS games.
RTS This mode is optimized for RTS Game.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.

Game Adjust
Settings > Game Adjust Description
On Sets Overclock to a higher refresh rate than specified by the panel specification.
Off Disables the Overclock improvement feature.

NOTE
Overclock •• After the monitor reboots, change the maximum refresh rate setting in the NVIDIA control panel.
•• If the screen display appears abnormal, turn off the Overclock setting.
•• The function can only be used through DisplayPort.
•• The Overclock function's features/performance may vary depending on the graphics card or gaming content.
Game Adjust •• We do not guarantee the performance of the function and are not responsible for any side effects that may occur from its activation.
You can control the black contrast to have better visibility in dark scenes.
You can easily distinguish objects on dark game screens.
High Sets the black stabilizer to High.
Black Stabilizer
Middle Sets the black stabilizer to Middle.
Low Sets the black stabilizer to Low.
Off Does not use the black stabilizer improvement feature.

14
Settings > Game Adjust Description
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.

ENGLISH
Setting to Faster may cause image sticking.
Response Time Faster Sets the response time to faster.
Fast Sets the response time to fast.
Game Adjust
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
Cross Hair Cross hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that fits their gaming environment among four
different cross hairs.
•• When the monitor is off or enters energy saving mode, the cross hair feature is automatically turned off.
Game Reset Returns game to the default settings.

Picture Adjust
Settings > Picture Adjust Description
Brightness/Contrast Adjusts the color contrast and brightness of the screen.
Gamma Custom gamma settings: Mode 1, Mode 2, Mode 3.
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
Color Temp Custom The user can adjust it to red, green, or blue by customization.

Picture Adjust Warm Sets the screen color to a reddish tone.

Medium Sets the screen color to between a red and blue tone.
Cool Sets the screen color to a bluish tone.
R/G/B You can customize the picture color using red, green, and blue colors.
Picture Reset Returns picture and color to the default settings.

15
 Input
Settings > Input Description
Input List Selects the input mode.
ENGLISH

Adjusts the aspect ratio of the screen.

Full Wide Displays the video in widescreen, regardless of the video signal input.
Input Original Displays video according to the aspect ratio of the video signal input.
Aspect Ratio
Just Scan The aspect ratio is not adjusted from the original.

NOTE
•• The display may look the same for Full Wide, Original, and Just Scan options at the recommended resolution.

General
Settings > General Description
Language Sets the menu screen to the desired language.
Turns the power LED on the bottom of the monitor on or off.
The power LED turns on automatically.
•• On Mode: Red
Power LED On
General •• Sleep Mode: Flashing Red
•• Off Mode: Off
Off The power LED turns off.
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function.
Automatic Standby
(Off, 4H, 6H, and 8H)

16
Settings > General Description
This feature disables the configuration and adjustment of menus.
On Enables OSD Lock.

ENGLISH
Off Disables OSD Lock.

OSD Lock NOTE

•• The menus except the menus below are disabled.
-- Picture Adjust: Brightness/Contrast
-- Input
General
-- General: OSD Lock, Information
Deep Sleep This features turns the monitor off when there is no signal detected from the HDMI or DisplayPort input after a certain amount of time.
On Enables Deep Sleep.
Off Disables Deep Sleep.
Information The following display information will be shown; the model, total power on time, resolution, refresh rate, mode and input source.
Reset to Initial Restores the default settings.
Settings

17
 TROUBLESHOOTING
Nothing is displayed on the screen.
ENGLISH

Is the monitor's power cord plugged in? •• Check if the power cord is correctly plugged into the power outlet.
Is the monitor's adapter plugged in? •• Make sure to use the adapter that is provided in the product package
Is the power LED on? •• Check the power cable connection and press the power button.
Is the power on and the power LED displaying red? •• Check that the connected input is enabled (Settings > Input).

Is the The screen is not currently set to the recommended •• This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or vertical frequency range of the monitor. Please
resolution. If you have no video or the screen flickers, see see the Product Specification section of this manual to set the appropriate frequency.
the troubleshooting guide in the product owner’s manual.
message being displayed?
Is the No Signal message being displayed? •• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.

Did you check your version of Windows OS? •• It is recommended that at least Windows OS version 10 should be installed.

Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution? •• If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended
resolution.
•• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or
misalignment of the display.
•• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the
performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off? •• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
•• To extend the lifetime of the monitor, use a screensaver.
Are there spots on the screen? •• When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor
is it related to the monitor's performance.

18
Some features are disabled.
Are some functions not available when you press the Menu button? •• The OSD is locked. Disable OSD Lock in General.
Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message?

ENGLISH
Have you installed the display driver? •• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web
site: http://www.lg.com.
•• Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
Are images displayed without sound? •• Make sure that the headphone port connections are made properly.
•• Try increasing the volume with the joystick.
•• Set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (OS) you use.)
The Lighting on the back of the monitor does not turn on.
Is the monitor's power cord plugged in? •• Check if the power cord is correctly plugged into the power outlet.
Is the monitor's adapter plugged in? •• Make sure to use the adapter that is provided in the product package.
Did you press the Lighting Button? •• Press the Lighting Button located at the bottom of the monitor.

19
 PRODUCT SPECIFICATION
Color Depth 8-bit color is supported.
ENGLISH

Max Resolution 3440 x 1440 @ 50 Hz

HDMI
Recommended Resolution 3440 x 1440 @ 50 Hz
Resolution 3440 x 1440 @ 100 Hz
Max Resolution
DP 3440 x 1440 @ 120 Hz (Overclock: On)**
Recommended Resolution 3440 x 1440 @ 60 Hz
Power Rating 19 V 6.0 A

Power Sources Operating Mode: 75 W (Typical)*

Power Consumption Sleep Mode: ≤ 0.5 W (Deep Sleep: On)
Off Mode: ≤ 0.3 W (Deep Sleep: On)
A16-140P1A, manufactured by CHICONY POWER TECHNOLOGY Co., Ltd.
AC/DC Adapter
Output: 19 V 7.37 A

20
 Operating Conditions Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity Less than 80 %
Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C (-4 °F to 140 °F)

ENGLISH
Humidity Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand 819.4 x 572.6 x 286.5 (mm)
Dimensions 32.2 x 22.5 x 11.2 (inches)
Without Stand 819.4 x 361.9 x 104 (mm)
32.2 x 14.2 x 4.0 (inches)
With Stand 7.9 kg (17.4 lbs)
Weight (Without Packaging)
Without Stand 6.1 kg (13.4 lbs)
Specifications are subject to change without notice.
* The Operating Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum resolution)
* The Power Consumption level can be different by operating condition and monitor setting.
** The Overclock function's features/performance may vary depending on the graphics card or gaming content.
We do not guarantee the performance of the function and are not responsible for any side effects that may occur from its activation.

21
 Factory Support Mode
(Preset Mode, HDMI/ DisplayPort PC)
ENGLISH

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks

640 x 480 31.469 59.94 -/- HDMI/ DisplayPort

800 x 600 37.879 60.317 +/+ HDMI/ DisplayPort
1024 x 768 48.363 60.0 -/- HDMI/ DisplayPort
3440 x 1440 73.68 49.99 +/- HDMI/ DisplayPort
3440 x 1440 88.82 59.97 +/- DisplayPort
3440 x 1440 127.36 84.96 +/- DisplayPort
3440 x 1440 151.00 100.00 +/- DisplayPort
3440 x 1440 180.00 120.00 +/- DisplayPort (Overclock)

HDMI Timing (Video)

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz)
480p 31.5 60
576p 31.25 50
720p 45 60
720p 37.5 50
1080p 67.5 60
1080p 56.25 50

22
G-SYNC Monitor
•• The monitor is purposely supporting the NVIDIA G-SYNC technology and targeting NVIDIA GPU.
•• Requirement for using G-SYNC
-- Supported Interface: DisplayPort (System must support DisplayPort 1.2 directly from the GPU.)

ENGLISH
-- Supported Graphic Card: A graphic card that supports NVIDIA’s G-SYNC is necessary.
-- Supported Version: Make sure to update the graphic card to the latest driver.
•• For more information and requirement, refer to NVIDIA website at http://www.geforce.com/hardware/technology/g-sync.

23
 Supplier's Declaration of Conformity

This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the Trade Name LG
label attached to the product provides information for technical support. Responsible Party LG Electronics USA, Inc.
Address 1000 Sylvan Ave Englewood Cliffs,
NJ 07632
Model
Telephone (201)266-2215
Serial No.