Computer Science Student Workbook Answers 2

lOMoARcPSD|48000249
Answers to Algorithms, Programming and Logic Workbook
Computer Science (Sorbonne University Abu Dhabi)
Scan to open on Studocu
Studocu is not sponsored or endorsed by any college or university

Downloaded by Skibidi Ohio ([email protected])
lOMoARcPSD|48000249
Cambridge IGCSE™ and O Level Computer Science
Answers to Algorithms, Programming

and Logic Workbook
7 Algorithm design and problem solving
1 Three from:
• analysis – a process of investigation, leading to the specification of what a program is
required to do
• design – uses the program specification from the analysis stage to show how the program
should be developed
• coding – the writing of the program or suite of programs
• testing – the completed program is run with test data to make sure that all of the modules
interact correctly, and the program as a whole works as intended in all circumstances
2 Abstraction
Stage Analysis
Use to identify the key elements required, discarding any unnecessary details and information
that is not required
Decomposition
Stage Analysis
Use to break down a complex problem into smaller parts, repeating this until each part can be
solved easily
Structure diagram
Stage Design
Use a hierarchical diagram that shows how a computer system can be repeatedly divided into
sub-systems
3 a data
hardware
communications
b Three from:
• input
• process
• output
• storage
4 Structure diagrams are used to show top-down design in a diagrammatic form.
Flowcharts show diagrammatically the steps required to complete a task and the order that they
are to be performed.
Pseudocode describes what an algorithm does by using English key words that are very similar
to those used in a high-level programming language.
Cambridge IGCSE and O Level Computer Science Teacher's Guide 1

© David Watson and Helen Williams 2021
lOMoARcPSD|48000249
5 Structure diagrams are used to show the top-down design of a computer program in a
diagrammatic form.
A structure diagram shows the design of a computer program in a hierarchical way with each
level giving a more detailed breakdown of the system into sub-systems.
6 a
Terminator flowchart symbols are used at the beginning and end of each flowchart.
Process flowchart symbols are used to show actions.
Input and output symbols – the same flowchart symbol is used to show input of data and
output of information.
Decision flowchart symbols are used to decide which action is to be taken next; these can
be used for selection and repetition/iteration.
b Flowchart flow lines use arrows to show the direction of flow through the chart, which is
usually, but not always, top to bottom and left to right.
7 Assignment: The single variable on the left of the ← is assigned the value of the expression on
the right. For example:
Total ← Total + SubTotal
Conditional: When different actions are performed by an algorithm according to the values of
the variables, conditional statements can be used to decide which action should be taken.
IF Age > 70
THEN
OUTPUT "Senior"
ELSE
OUTPUT "Adult or Junior"
ENDIF
Iterative: When some actions performed as part of an algorithm need repeating this is called
iteration. Loop structures are used to perform the iteration.
FOR Counter ← 1 TO 10
OUTPUT "*"
NEXT Counter

lOMoARcPSD|48000249
8 a Loop 1: FOR .. TO .. NEXT:

OUTPUT Student[Counter]
NEXT Counter
Loop 2: REPEAT .. UNTIL
Counter ← 0
REPEAT
OUTPUT Student[Counter]
Counter ← Counter + 1
UNTIL Counter > 19
Loop 3: WHILE .. DO .. ENDWHILE
Counter ← 0
WHILE Counter < 20 DO
Student[Counter]
Counter ← Counter + 1
ENDWHILE
b i Conditional Statements 1: IF statements
OUTPUT "Please enter your name "
INPUT Name
IF Name = "Alice"
THEN
OUTPUT "Welcome Alice "
ENDIF
IF Name = "Abid"
THEN
OUTPUT "Welcome Abid "
ENDIF
IF Name = "Dinesh"
THEN
OUTPUT "Welcome Dinesh "
ENDIF
IF Name = "Daisy"
THEN
OUTPUT "Welcome Daisy "
ENDIF
IF Name = "Zak"
THEN
OUTPUT "Welcome Zak "
ENDIF

lOMoARcPSD|48000249
IF Name <> "Alice" AND Name <> "Abid" AND Name <> "Dinesh"
AND Name <> "Daisy" <> AND Name <> "Zak"
THEN
OUTPUT "You are not welcome "
ENDIF
Conditional Statements 2: CASE statements
OUTPUT "Please enter your name "
INPUT Name
CASE OF Name
"Alice" : OUTPUT "Welcome Alice "
"Abid" : OUTPUT "Welcome Abid "
"Dinesh" : OUTPUT "Welcome Dinesh "
"Daisy" : OUTPUT "Welcome Daisy "
"Zak" : OUTPUT "Welcome Zak "
OTHERWISE OUTPUT "You are not welcome "
ENDCASE
ii • The most suitable conditional statement to use is CASE as the code is considerably
shorter to write …
• … and clearer to read and understand.
c i Pre-condition loop

lOMoARcPSD|48000249
Post-condition loop
ii Pre-condition loop WHILE .. DO .. ENDWHILE

Post-condition loop REPEAT .. UNTIL
d Loop 1
FOR .. TO .. NEXT
Python
Student = ["Alice", "Jan", "Lim", "Ian", "Min", "Sue", "Tim",
"Dee", "Avril", "Ron", "Fred", "Idris", "May", "Susie", "Tony",
"Dom", "Ted", "Davy", "Chen", "Bao"]
Counter = 0
for Counter in range(20):
print(Student[Counter])
print()
Visual Basic
Dim Student = New String() {"Alice", "Jan", "Lim", "Ian", "Min",
"Sue", "Tim", "Dee", "Avril", "Ron", "Fred", "Idris", "May",
"Susie", "Tony", "Dom", "Ted", "Davy", "Chen", "Bao"}
Dim Counter As Integer
'FOR .. TO .. NEXT
For Counter = 0 To 19
Console.WriteLine(Student(Counter))
Next
Console.WriteLine()

lOMoARcPSD|48000249
Java
String[] Student ={"Alice", "Jan", "Lim", "Ian", "Min", "Sue",
"Tim", "Dee", "Avril", "Ron", "Fred", "Idris", "May", "Susie",
"Tony", "Dom", "Ted", "Davy", "Chen", "Bao"};
int Counter;
// FOR .. NEXT
for (Counter = 0; Counter <= 19; Counter ++) {
System.out.println(Student[Counter]);
}
System.out.println();
Loop 2
WHILE .. DO .. ENDWHILE
Python
"Dee", "Avril", "Ron", "Fred", "Idris", "May", "Susie", "Tony",
"Dom", "Ted", "Davy", "Chen", "Bao"]
Counter = 0
while Counter < 20:
Counter = Counter + 1
print()
Visual Basic

'WHILE .. DO .. ENDWHILE
Counter = 0
While Counter < 20
End While
Console.WriteLine()

lOMoARcPSD|48000249
Java
int Counter;
// WHILE .. DO .. ENDWHILE
Counter = 0;
while (Counter <= 19){
Counter ++;
}
Loop 3
REPEAT .. UNTIL
Python Not available
Visual Basic

'REPEAT .. UNTIL
Counter = 0
Do
Loop Until Counter = 19
Console.WriteLine()
Java
int Counter;
// REPEAT .. UNTIL
Counter = 0;
do {
Counter ++;
}
while (Counter <= 19);

lOMoARcPSD|48000249
9 a DECLARE Number, Total : REAL

DECLARE Counter : INTEGER
Total ← 0
OUTPUT "Please enter next Number"
INPUT Number
Total ← Total + Number
NEXT Counter
OUTPUT "The total of the 10 numbers input is ", Total
b

lOMoARcPSD|48000249
10 a input – the number of guesses allowed

input – a guess for a word
check – checks if a guess is correct
check – checks how many guesses are left
output – Message(s) to show if a guess is correct or not
b • To play a word guessing game …
• … allowing the player to decide how many guesses to take.
c // The code below represents the guessing algorithm.
// Assume that the word to guess, W, has already been
// declared and defined.
DECLARE N : INTEGER
DECLARE G : STRING
DECLARE Finish : BOOLEAN
Finish ← FALSE
OUTPUT "How many guesses would you like?"
INPUT N
REPEAT
OUTPUT "Please enter your guess: "
INPUT G
IF G = W
THEN
OUTPUT "Well done you guessed the word!"
Finish ← TRUE
ELSE
OUTPUT "You failed to guess the word!"
N ← N – 1
ENDIF
UNTIL Finish OR N = 0
11 Standard methods of solution are used in the design of algorithms. These include adding in a
new value every time an action occurs, for example, awarding a mark to each student – this is
called totalling. When divided by the number of times this occurs, this gives the average.
Keeping a record of the number of times an action occurs is called counting. Finding the
largest, maximum, and smallest, minimum, are also standard methods.
In order to look for an item in a list a search is used. The method you need to know for IGCSE
Computer Science is to inspect each item in the list in turn to see if it is the one required. This
is called a linear search.
To put a list in order a sort is used. The method you need to know for IGCSE Computer
Science is called a bubble sort.

lOMoARcPSD|48000249
12 a • Each element in a list is compared with the next element and swapped if
the elements are in the wrong order …
• … starting from the first element and finishing with the next-to-last element.
b First ← 1
Last ← 10
REPEAT
Swap ← FALSE
FOR Index ← First TO Last - 1
IF Names[Index] > Names[Index + 1]
THEN
Temp ← Names[index]
Names[index] ← Names[index + 1]
Names[index + 1] ← Temp
Swap ← TRUE
ENDIF
NEXT Index
Last ← Last - 1
UNTIL (NOT Swap) OR (Last = 1)
13 a i Validation is appropriate to check that only reasonable data is accepted when data
is entered.
ii Verification is appropriate to check that the data does not change as it is being entered.
b i range check
presence check
ii double entry
visual check
14 a • Test data is a set of values used to determine whether a solution is working as
it should …
• … the values are chosen to test a full range of operating conditions.
b i normal data – a set of test data used that the program would normally be expected to
work with
abnormal/erroneous data – test data chosen to be rejected by the solution as not
suitable, if the solution is working properly
extreme data – the largest and smallest values that normal data can take
ii 99 inside the boundary
100 outside the boundary

lOMoARcPSD|48000249
15 a W X Y Z Mark OUTPUT
0 0 100 0
1 78 78 78 78
2 34 112 34
3 22 134 22
-4
4 98 232 98
5 16 248 16
734
6 336 88
999
98 16 336
b • selects the maximum and minimum values input between 0 and 100 …
• … calculates the total of these valid input values …
• … and outputs the maximum, minimum and the total.
c

lOMoARcPSD|48000249
d NumberOfMarks ← 0
HighMark ← 0
LowMark ← 100
Total ← 0
REPEAT
OUTPUT "Enter 999 to finish"
OUTPUT "Marks must be in the range 0-100, enter next
mark"
INPUT Mark
IF Mark <> 999
THEN
REPEAT
IF Mark <0 OR Mark >100
THEN
OUTPUT "Your mark is out of range,
please re-enter the mark"
INPUT Mark
ENDIF
UNTIL Mark >=0 AND Mark <=100
IF Mark > HighMark
THEN
HighMark ← Mark
ENDIF
IF Mark < LowMark
THEN
LowMark ← Mark
ENDIF
Total ← Total + Mark
NumberOfMarks ← NumberOfMarks + 1
ENDIF
UNTIL Mark = 999
OUTPUT "The highest mark is ", HighMark
OUTPUT "The lowest mark is ", LowMark
OUTPUT "The total of all the marks is ", Total

lOMoARcPSD|48000249
e Example test data could be: Test data: −1, 0, 100, 101, −5, 21, 999
This has been chosen so that there is mixture of normal, abnormal, extreme and boundary
data. In this case:
Normal data: 21, 999 : 999 has been chosen to ensure that the method used to stop the
program works and should be included in test data; but any other value in the range 1–99
could also be used.
Abnormal data: −5 : but any other data larger than 101, less than −1, or of the wrong data
type (e.g. twenty one) could be used
Extreme data: 0, 100 : these are the only choice of extreme data for this example
Boundary data: −1, 0, 100, 101 : these are the only choice of boundary data for the main
data range (although some students might also want to test the boundary for the 'quit'
option, i.e. 998, 999, 1000).
Trace table:
NumberOf Low
HighMark Total Mark OUTPUT
Marks Mark
Enter 999 to finish
0 0 100 0 Marks must be in the
range 0-100, enter
next mark
Your mark is out of
−1 range, please re-enter
the mark
Enter 999 to finish
range 0-100, enter
next mark
Enter 999 to finish
range 0-100, enter
next mark
Your mark is out of
101 range, please re-enter
the mark
Your mark is out of
–5 range, please re-enter
the mark
Enter 999 to finish
3 121 21 Marks must be in the
range 0-100, enter
next mark
The Highest mark is 100
The lowest mark is 0
999
The total of all the
marks is 121

lOMoARcPSD|48000249
16 a OUTPUT T should be INPUT T

T < 30 should be T < 20
No flowline out of the OUTPUT "Too Low" box.
T > 20 should be T > 30
Flowlines from the decision box are not labelled.
The arrow on the horizontal flowline is at the wrong end and points in the wrong direction.
No flowline out of the OUTPUT "Too High" box.
b
8 Programming
1 Three from:
• integer: a positive or negative whole number that can be used with mathematical operators
• real: a positive or negative number with a fractional part that can be used with
mathematical operators
• Boolean: a variable or constant that can have only two values TRUE or FALSE
• char: a single alphanumeric character
• string: multiple alphanumeric characters

lOMoARcPSD|48000249
2 a Python
Number1 = int(input("Please enter the first whole number "))
Number2 = int(input("Please enter the second whole number "))
Number3 = int(input("Please enter the third whole number "))
Visual Basic
Console.Write("Please enter first whole number ")
Number1 = Integer.Parse(Console.ReadLine())
Console.Write("Please enter second whole number ")
Console.Write("Please enter third whole number ")
Java
System.out.print("Please enter the first whole number ");
Number1 = myObj.nextInt();
System.out.print("Please enter the second whole number ");
System.out.print("Please enter the third whole number ");
b Python
Number1 = 10
Number2 = 20
Number3 = 30
Visual Basic
Number1 = 10
Number2 = 20
Number3 = 30
Java
Number1 = 10;
Number2 = 20;
Number3 = 30;
c Python
print("Integer values assigned and stored", Number1, Number2,
Number3)
Visual Basic
Console.WriteLine("Integer values assigned and stored " &
Number1 & " " & Number2 & " " & Number3)
Java
System.out.println("Integer values assigned and stored " +
Number1 + " " + Number2 + " " + Number3);

lOMoARcPSD|48000249
d Python
Number1 = int(input("Please enter the first whole number "))
Number2 = int(input("Please enter the second whole number "))
Number3 = int(input("Please enter the third whole number "))
print("Integer values entered", Number1, Number2, Number3)
Number1 = 10
Number2 = 20
Number3 = 30
print("Integer values assigned and stored" , Number1,

Number2, Number3)
Visual Basic
Module Module1
Sub Main()
Dim Number1, Number2, Number3 As Integer
Console.Write("Please enter first whole number ")
Console.Write("Please enter second whole number ")
Console.Write("Please enter third whole number ")
Console.WriteLine("Integer values entered " & Number1

& " " & Number2 & " " & Number3)
Number1 = 10
Number2 = 20
Number3 = 30
Console.WriteLine("Integer values assigned and stored

" & Number1 & " " & Number2 & " " & Number3)
Console.ReadKey()
End Sub
End Module

lOMoARcPSD|48000249
Java
import java.util.Scanner;
class Q2 Java
{
public static void main(String args[])
{
Scanner myObj = new Scanner(System.in);
int Number1, Number2, Number3;
System.out.print("Please enter the first whole number ");

System.out.print("Please enter the second whole number ");
System.out.print("Please enter the third whole number ");
System.out.println("Integer values entered " +

Number1 + " " + Number2 +" " + Number3);
Number1 = 10;
Number2 = 20;
Number3 = 30;
System.out.println("Integer values assigned and

stored" + Number1 + " " + Number2 + " " + Number3);
}
}
3 a Python
weight = 0
while weight < 0.5 or weight > 5.0:
weight = float(input("Please enter the weight of your
parcel "))
Visual Basic
weight = 0
While (weight < 0.5) Or (weight > 5.0)
Console.Write("Please enter the weight of your parcel ")
weight = Decimal.Parse(Console.ReadLine())
End While

lOMoARcPSD|48000249
Java
do {
System.out.print("Please enter the weight of your parcel ");
weight = myObj.nextDouble();
}
while (weight < 0.5 || weight > 5.0);
b Python
print(" Options")
print(" 1 Guaranteed next day delivery before noon")
print(" 2 Guaranteed next day delivery")
print(" 3 24-hour delivery")
print(" 5 3-5 days delivery")
option = int(input("Please enter your chosen option "))
if option == 1:
# option 1 code
elif option == 2:
# option 2 code
elif option == 3:
# option 3 code
elif option == 4:
# option 4 code
elif option == 5:
# option 5 code
else:
print("Incorrect option chosen")
Visual Basic
Console.WriteLine(" Options")
Console.WriteLine(" 1 Guaranteed next day delivery before
noon")
Console.WriteLine(" 2 Guaranteed next day delivery")
Console.WriteLine(" 3 24-hour delivery")
Console.WriteLine(" 5 3-5 days delivery")
Console.Write ("Please enter your chosen option ")

opt = Integer.Parse(Console.ReadLine())

lOMoARcPSD|48000249
Select Case opt

Case 1
'option 1 code
Case 2
'option 2 code
Case 3
'option 3 code
Case 4
'option 4 code
Case 5
'option 5 code
Case Else
Console.WriteLine("Incorrect option chosen")
End Select
Java
System.out.println(" Options");
System.out.println(" 1 Guaranteed next day delivery before
noon");
System.out.println(" 2 Guaranteed next day delivery");
System.out.println(" 3 24-hour delivery");
System.out.println(" 5 3-5 days delivery");
System.out.print("Please enter your chosen option ");

option = myObj.nextInt();
switch (option) {
case 1:
//option 1 code ;
break;
case 2:
//option 2 code;
break;
case 3:
//option 3 code;
break;
case 4:
//option 4 code;
break;

lOMoARcPSD|48000249
case 5:
//option 5 code;
break;
default:
System.out.println("Incorrect option chosen");
}
c Python
weight = 0
while weight < 0.5 or weight > 5.0:
weight = float(input("Please enter the weight of your
parcel "))
print(" Options")
print(" 1 Guaranteed next day delivery before noon")
print(" 2 Guaranteed next day delivery")
print(" 5 3-5 days delivery")
if option == 1:
cost = weight * 10 + 1
elif option == 2:
cost = weight * 10
elif option == 3:
cost = 5
elif option == 4:
cost = 4
elif option == 5:
cost = 3
else:
print ("Incorrect option chosen")
cost = 0
print ("Your cost is ", cost)

lOMoARcPSD|48000249
Visual Basic
Module Module1
Sub Main()
Dim weight, cost As Decimal
Dim opt As Integer
weight = 0
While (weight < 0.5) Or (weight > 5.0)
Console.Write("Please enter the weight of your
parcel ")
weight = Decimal.Parse(Console.ReadLine())
End While
Console.WriteLine(" Options")
Console.WriteLine(" 1 Guaranteed next day delivery
before noon")
Console.WriteLine(" 2 Guaranteed next day delivery")
Console.WriteLine(" 5 3-5 days delivery")
Console.Write("Please enter your chosen option ")

opt = Integer.Parse(Console.ReadLine())
Select Case opt

Case 1
cost = weight * 10 + 1
Case 2
cost = weight * 10
Case 3
cost = 5
Case 4
cost = 4
Case 5
cost = 3
Case Else
cost = 0
End Select

lOMoARcPSD|48000249
Console.WriteLine("Your cost is " & cost)
Console.ReadKey()
End Sub
End Module
Java
class Q3Java
{
{
double weight, cost;
int option;
do {
System.out.print("Please enter the weight of your
parcel ");
weight = myObj.nextDouble();
}
while (weight < 0.5 || weight > 5.0);
System.out.println(" Options");
System.out.println(" 1 Guaranteed next day delivery
before noon");
System.out.println(" 2 Guaranteed next day delivery");
System.out.println(" 5 3-5 days delivery");

option = myObj.nextInt();
switch (option) {
case 1:
cost = weight * 10 + 1;
break;

lOMoARcPSD|48000249
case 2:
cost = weight * 10;
break;
case 3:
cost = 5;
break;
case 4:
cost = 4;
break;
case 5:
cost = 3;
break;
default:
System.out.println("Incorrect option chosen");
cost = 0;
}
System.out.println("Your cost is " + cost);
}
}
d Test data Expected output Actual output
0.4 Error message
5.1 Error message
−1 Error message
0.5 Option 1 Your cost is 6
5 Option 1 Your cost is 51
1 Option 7 Incorrect option chosen

lOMoARcPSD|48000249
4 a Counting: keeping a count of the number of times an action is performed:

b Iteration: a section of programming code can be repeated under certain conditions.
For example, a pre-condition loop:
Python
while TotalWeight < 100:
TotalWeight = TotalWeight + Weight
Visual Basic
While TotalWeight < 100
End While
Java
while (TotalWeight < 100)
{
TotalWeight = TotalWeight + Weight;
}
c Selection: allowing the selection of different paths through the steps of a program:
Python
if Age > 17:
print("You are an adult")
Visual Basic
If Age > 17 Then
Console.WriteLine("You are an adult")
End If
Java
if (Age > 17) {
System.out.println ("You are an adult");
}
d Sequence – the order that steps in a program are executed.
For example: TotalWeight and Weight must be assigned values before the WHILE
loop is executed.
Python
TotalWeight = 0
while TotalWeight < 100:
Weight = float(input("Enter the next weight: "))

lOMoARcPSD|48000249
Visual Basic
Dim Weight, TotalWeight As Decimal
TotalWeight = 0
While TotalWeight < 100

Console.WriteLine("Please enter the weight of your parcel ")
Weight = Decimal.Parse(Console.ReadLine())
End While
Java
class Q4{
{
double TotalWeight = 0;
double Weight;
while (TotalWeight < 100)

{
System.out.print("Please enter the weight of
your parcel ");
Weight = myObj.nextDouble();
TotalWeight = TotalWeight + Weight;
}
}
}
e String handling – strings are used to store text. Every string contains a number of
characters, from an empty string which has no characters stored to a maximum number
specified by the programming language. The characters in a string can be labelled by
position number. The first character in a string can be in position zero or position one,
depending on the language.
For example, finding the number of characters in a string:
Python
len(MyString)
Visual Basic
MyString.Length()
Java
MyString.length();

lOMoARcPSD|48000249
5 // Algorithm to input ten positive numbers and total them,

// output the total and then average
DECLARE A, B, C, D : INTEGER
DECLARE D : REAL
A ← 0
B ← 0
REPEAT
REPEAT
OUTPUT "Please enter a positive number "
INPUT C
UNTIL C > 0
A ← A + C
B ← B + 1
UNTIL B = 10
D ← A / B
OUTPUT A, D
6 a Python
# Python program to total 10 numbers and find the average
Total = 0
Counter = 0 # Total and Counter initialised to zero
while Counter < 10:

Number = int(input("Please enter a positive number "))
while Number <= 0: # error trapping for negative numbers
Number = int(input("Your number was zero or negative, please try
again"))
Total = Total + Number
Counter = Counter + 1 # updating Total and Counter
Average = Total / Counter # calculating the Average
print(" The total is ", Total, " the average is ", Average)
# outputting the results

lOMoARcPSD|48000249
Visual Basic
'Visual Basic program to total 10 numbers and find the average
Module Module1
Sub Main()
Dim Total, Number, Counter As Integer
Dim Average As Decimal ' variables declared
Total = 0
Counter = 0 ' Total and Counter initialised To zero
Do
Console.Write("Please enter a positive number ")
Number = Int(Console.ReadLine())
While (Number <= 0) 'error trapping for negative numbers

Console.Write("Your number was zero or negative. Please try
again ")
Number = Int(Console.ReadLine())
End While
Total = Total + Number

Counter = Counter + 1 'updating Total And Counter
Average = Total / Counter ' calculating the Average
Console.WriteLine(" The total is " & Total & " the average is " &
Average) ' outputting the results
Console.ReadLine()
End Sub
End Module

lOMoARcPSD|48000249
Java
// Java program to total 10 numbers and find the average
class Q6Java
{
{
int Counter, Number;

double Average Total; //variables declared , Total must be double
otherwise the division will be truncated
Total = 0;
Counter = 0; //Total and Counter initialised To zero
do {
System.out.print("Please enter a positive number ");

Number = myObj.nextInt();
while (Number <= 0){
System.out.print("Your number was zero or negative. Please

try again ");
Number = myObj.nextInt(); //error trapping for negative
numbers
}
Total = Total + Number;

Counter = Counter + 1; //updating Total And Counter
}
while (Counter < 10);
Average = Total / Counter ; // calculating the Average
System.out.println(" The total is " + Total + " the average is " +

Average);//outputting the results
}
}

lOMoARcPSD|48000249
b Total Number Counter Average OUTPUT

0 0
4 4 1 Please enter a positive number
Your number was negative or
0
zero, please try again
Your number was negative or
-3
zero, please try again
The total is 50 the average
5.0
is 5.0
7 a Python
"Dee"]
for Counter in range(8):
print()
Counter = 0
while Counter < 8:
print()
Visual Basic
For Counter = 0 To 7
Next
Console.WriteLine()

lOMoARcPSD|48000249
Counter = 0
Do
Console.WriteLine()
Java
for (Counter = 0; Counter <= 7; Counter++) {
}
System.out.println()
Counter = 0;
while (Counter <= 7){
Counter++;
}
System.out.println()
b Python
NumberOfStudents = len(Student)
Counter = 0
while Counter < NumberOfStudents:
print("Number of students", NumberOfStudents)
Visual Basic
NumberOfStudents = Student.Length
Counter = 0
Do
Loop Until Counter = NumberOfStudents
Console.WriteLine("Number of students " & NumberOfStudents)

Java
NumberOfStudents = Student.length;
Counter = 0;
while (Counter < NumberOfStudents){
System.out.println("Number of students " + NumberOfStudents);
Counter++;
}
8 a Find the length: LENGTH(MyString)
Convert to upper case: UCASE(MyString)
Convert to lower case: LCASE(MyString)
Find the first character: SUBSTRING(MyString, 1, 1)

lOMoARcPSD|48000249
b Python
MyString = "Test String"
Length = len(MyString)
FirstChar = MyString[0:1]
UpperCase = MyString.upper()
LowerCase = MyString.lower()
print("Length of string ", Length)

print("First character of string ", FirstChar)
print("String in upper case ", UpperCase)
print("String in lower case ", LowerCase)
Visual Basic
Module Module1
Sub Main()
Dim MyString, FirstChar, UpperCase, LowerCase As String
Dim Length As Integer
MyString = "Test String"
Length = MyString.Length()
FirstChar = MyString.Substring(0, 1)
UpperCase = UCase(MyString)
LowerCase = LCase(MyString)
Console.WriteLine("Length of string " & Length)
Console.WriteLine("First character of string " & FirstChar)
Console.WriteLine("String in upper case " & UpperCase)
Console.WriteLine("String in lower case " & LowerCase)
Console.ReadKey()
End Sub
End Module
Java
import java.util.*;
class Q8Java
{
{
String MyString, FirstChar, UpperCase, LowerCase;

int Length;
MyString = "Test String";
Length = MyString.length();
FirstChar = MyString.substring(0, 1);
UpperCase = MyString.toUpperCase();
LowerCase = MyString.toLowerCase();
System.out.println("Length of string " + Length);
System.out.println("First character of string " +
FirstChar);
System.out.println("String in upper case " + UpperCase);
System.out.println("String in lower case " + LowerCase);
}
}

lOMoARcPSD|48000249
9 a Python
A = ((B + C – D * E) ** F) / G
Visual Basic
A = ((B + C – D * E) ^ F) / G
Java
A = Math.pow((B + C – D * E), F) / G;
b Python
if (A == B) or (C != D):
A = 0
elif (A > B) and (C == D):
B = 0
Visual Basic
If (A = B) Or (C <> D) Then
A = 0
Else
If (A > B) And (C = D) Then
B = 0
End If
End If
Java
if (A == B) or (C != D) {
A = 0;
}
else {
if ((A > B) and (C = D)) {
B = 0;
}
}
c FOR Times = 1 TO 20
FOR Count = 1 TO 10
OUTPUT Count
NEXT Count
NEXT Times
d Python
for Times in range(20):
for Count in range(10):
print(Count + 1)
Visual Basic
Module Module1
Sub Main()
Dim Count, Times As Integer
For Times = 1 To 20
For Count = 1 To 10
Console.Write(Count)
Next
Console.WriteLine()
Next
Console.ReadKey()
End Sub
End Module

lOMoARcPSD|48000249
Java
import java.util.*;
class Q9Java
{
{
int Count, Times;

for (Times = 1; Times <= 20; Times++) {
for (Count = 1; Count <= 10; Count++) {
System.out.print(Count);
}
}
}
}
10 Tasks that are repeated many times in an algorithm make use of procedures and functions.
Use of these can reduce the size of a program.
Procedures and functions are defined once and called many times. They can be written with
and without parameters. They are the variables that store the values passed to a procedure or
function.
Functions always return a value and the value can be used on the right-hand side of an
assignment statement.
A variable that can be used in any part of a program is called a global variable. A variable that
is declared within a procedure or function is called a local variable.
11 a Library routines are fully tested and ready to be incorporated into a program …
… they perform many types of task that need to be used regularly.
b 1 MOD
2 DIV
3 ROUND
4 RANDOM
c Python
import random
Number1 = int(random.random() * 10 + 10)

Number2 = int(random.random() * 10 + 10)
print(Number1, "is the first random integer between 10 and 20")
print(Number2, "is the second random integer between 10 and 20")
AnswerMod = Number1 % Number2

AnswerDiv = Number1 // Number2
print(Number1, "MOD", Number2, "is", AnswerMod)

print(Number1, "DIV", Number2, "is", AnswerDiv)

lOMoARcPSD|48000249
Visual Basic
Module Module1
Sub Main()
Dim Number1, Number2 As Integer
Dim AnswerMod, AnswerDiv As Integer
Randomize()
Number1 = CInt(Rnd() * 10 + 10)
Number2 = CInt(Rnd() * 10 + 10)
Console.WriteLine(Number1 & " is the first random integer
between 10 and 20")
Console.WriteLine(Number2 & " is the second random integer
between 10 and 20")
AnswerMod = Number1 Mod Number2

AnswerDiv = Number1 \ Number2
Console.WriteLine(Number1 & " MOD " & Number2 & " is " &
AnswerMod)
Console.WriteLine(Number1 & " DIV " & Number2 & " is " &
AnswerDiv)
Console.ReadKey()
End Sub
End Module
Java
import java.lang.Math;
import java.util.Random;
class Q11Java
{
{
int Number1, Number2;
Random rand = new Random();
Number1 = rand.nextInt(10) + 10;
Number2 = rand.nextInt(10) + 10;
System.out.println(Number1 + " is the first random integer

between 10 and 20");
System.out.println(Number2 + " is the second random
integer between 10 and 20");
int AnswerMod = Number1 % Number2;
int AnswerDiv = Number1 / Number2;
System.out.println(Number1 + " MOD " + Number2 + " is " +

AnswerMod);
System.out.println(Number1 + " DIV " + Number2 + " is " +
AnswerDiv);
}
}

lOMoARcPSD|48000249
12 a array: a data structure containing several elements of the same data type; these elements
can be accessed using the same identifier name
array dimension: dimension determined by how many index numbers are needed to
locate a piece of data, for instance a one-dimensional array only needs one index number,
a two dimensional array needs two index numbers, and so on
array index: identifies the position of an element in an array
b DECLARE OXO : ARRAY[3, 3] OF CHAR
DECLARE PROCEDURE ShowGame()

DECLARE RowIndex, ColumnIndex : INTEGER
FOR RowIndex ← 1 TO 3
PRINT OXO[RowIindex,1], OXO[RowIindex,2], OXO[RowIindex,3]
NEXT
ENDPROCEDURE
c Python
OXO =[["O"," "," "],[" ", "X", " "],[" ", "X", "X"]]
def PrintStateOfGame():
print(OXO[0])
print(OXO[1])
print(OXO[2])
PrintStateOfGame()
Visual Basic
Module Module1
Public OXO = New String(2, 2) {{"O", " ", " "}, {" ", "X", " "},
{" ", "X", "O"}} 'OXO must be declared as a public/global variable
Sub Main()
PrintStateOfGame()
Console.ReadKey()
End Sub
Sub PrintStateOfGame()
Dim RowCounter, ColumnCounter As Integer
For RowCounter = 0 To 2
For ColumnCounter = 0 To 2
Console.Write(OXO(RowCounter, ColumnCounter))
Next
Console.WriteLine()
Next
End Sub
End Module
Java
import java.util.*;
class Q12Java
{
public static String[][] OXO = {{"O", " ", " "}, {" ", "X", " "},
{" ", "X", "O"}};
static void PrintStateOfGame()

{
int RowCounter, ColumnCounter;
for (RowCounter = 0; RowCounter <= 2; RowCounter++){
for (ColumnCounter = 0; ColumnCounter <= 2; ColumnCounter++){
System.out.print(OXO[RowCounter][ColumnCounter]);
}
}

lOMoARcPSD|48000249

{
PrintStateOfGame();
}
13 a Data that will be required again will be lost if it is only in RAM when the computer is
switched off …
… if data is stored in a file, it can be accessed by the same or another program at a later date.
b i DECLARE Text : STRING
DECLARE MyFile : STRING
MyFile ← "MyFile.txt"
Text ← "Test"
OPEN MyFile FOR WRITE
WRITEFILE, Text
CLOSEFILE(MyFile)
ii OPEN MyFile FOR READ
READFILE, Text
OUTPUT Text
CLOSEFILE(MyFile)
c Python
MyFile = open("MyFile.txt","w")
Text = "Test"
MyFile.write(Text)
print("The file contains this line of text")

MyFile = open("MyFile.txt","r")
Text = MyFile.read()
print(Text)
Visual Basic
Imports System.IO
Module Module1
Sub Main()
Dim Text As String
Dim objMyFileWrite As StreamWriter
Dim objMyFileRead As StreamReader
objMyFileWrite = New StreamWriter("MyFile.txt")
Console.Write("Please enter a line of text ")
Text = "Test"
objMyFileWrite.WriteLine(Text)
objMyFileWrite.Close()
objMyFileRead = New StreamReader("MyFile.txt")

Text = objMyFileRead.ReadLine()
Console.Write("The file contains this line of text ")
Console.WriteLine(Text)
objMyFileRead.Close()
End Sub
End Module

lOMoARcPSD|48000249
Java
import java.io.BufferedReader;
import java.io.PrintWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
class TextFile {
public static void main(String[] args) {

String Text;
try {
FileWriter myFileWriter = new FileWriter("MyFile.txt", false);
PrintWriter myPrintWriter = new PrintWriter(myFileWriter);
Text = "Test";
myPrintWriter.printf("%s" + "%n", Text);
myPrintWriter.close();
} catch (IOException e) {
e.printStackTrace();
}
try {
FileReader myFileReader = new FileReader("MyFile.txt");
BufferedReader myBufferReader = new BufferedReader(myFileReader);
Text = myBufferReader.readLine();
System.out.print("The file contains this line of text ")
System.out.println(Text);
myFileReader.close();
}
}
}
14 a–e:
Python
#### Part b ###
def NewPassword():
MyPassword = input("Please enter your new password ")
Valid = True
Length = len(MyPassword)
if Length > 20:
print("Too long")
Valid = False
if Length < 10:
print("Too short")
Valid = False

lOMoARcPSD|48000249
Counter = 0
NoSpace = True
while (Counter < Length and NoSpace):
if MyPassword[Counter:Counter + 1] == " ":
print("Spaces not allowed")
Valid = False
NoSpace = False
Counter = 0
UpperCase = False
while (Counter < Length and not UpperCase):
if "A" <= MyPassword[Counter:Counter + 1] <= "Z":
UpperCase = True
if (not UpperCase):
print("No uppercase letter")
Valid = False
Counter = 0
Digit = False
while (Counter < Length and not Digit):
if "0" <= MyPassword[Counter:Counter + 1] <= "9":
Digit = True
if (not Digit):
print("No digit")
Valid = False
if Valid:
print("Password accepted")
MyFile = open("MyPassword.txt","w") #### Part c ###
MyFile.write(MyPassword) #### Part c ###
else:
print("Password rejected")

lOMoARcPSD|48000249
#### Part d ###
def CheckPassword():
MyPassword = input("Please enter your password ")
MyFile = open("MyPassword.txt","r")
StoredPassword = MyFile.read()
if MyPassword == StoredPassword:
print("Password matches")
else:
print("Password does not match")
#### Part e ###
def ChangePassword():
MyPassword = input("Please enter your password ")
MyFile = open("MyPassword.txt","r")
StoredPassword = MyFile.read()
if MyPassword == StoredPassword:
NewPassword()
else:
print("Password incorrect cannot change")
#### Part a ###
Quit = False
while not Quit:
print (" Password Management")
print (" 1. Enter a new password")
print (" 2. Check your password")
print (" 3. Change your password")
print (" 4. Quit")

lOMoARcPSD|48000249
if option == 1:
NewPassword()
elif option == 2:
CheckPassword()
elif option == 3:
ChangePassword()
elif option == 4:
Quit = True
else:
print ("Incorrect option chosen")
Visual Basic
Imports System.IO
Module Module1
'*** Part a ***

Sub Main()
Dim Opt As Integer
Dim Quit As Boolean = False
Dim MyPassword As String
While Not Quit

Console.WriteLine(" Password Management")
Console.WriteLine(" 1. Enter a new password")
Console.WriteLine(" 2. Check your password")
Console.WriteLine(" 3. Change your password")
Console.WriteLine(" 4. Quit")
Console.Write("Please enter your chosen option ")

Opt = Integer.Parse(Console.ReadLine())

lOMoARcPSD|48000249
Select Case Opt

Case 1
Console.Write("Please enter your password ")
MyPassword = Console.ReadLine()
NewPassword(MyPassword)
Case 2
CheckPassword(MyPassword)
Case 3
ChangePassword(MyPassword)
Case 4
Quit = True
Case Else
End Select
Console.ReadKey()
End While
End Sub
'******

lOMoARcPSD|48000249
'*** Part b ***

Sub NewPassword(MyString As String)
Dim Length, Counter As Integer
Dim Valid, NoSpace, UpperCase, Digit As Boolean
Dim objMyFileWrite As StreamWriter
Valid = True
Length = Len(MyString)
If Length > 20 Then
Console.WriteLine("Too long")
Valid = False
End If
If Length < 10 Then
Console.WriteLine("Too short")
Valid = False
End If
Counter = 0
NoSpace = True
While Counter < Length And NoSpace
If MyString.Substring(Counter, 1) = " " Then
Console.WriteLine("Spaces not allowed ")
Valid = False
NoSpace = False
End If
End While

lOMoARcPSD|48000249
Counter = 0
UpperCase = False
While Counter < Length And Not UpperCase
If MyString.Substring(Counter, 1) >= "A" And
MyString.Substring(Counter, 1) <= "Z" Then
UpperCase = True
End If
End While
If Not UpperCase Then
Console.WriteLine("No uppercase letter")
Valid = False
End If
Counter = 0
Digit = False
While Counter < Length And Not Digit
If MyString.Substring(Counter, 1) >= "0" And
MyString.Substring(Counter, 1) <= "9" Then
Digit = True
End If
End While
If Not Digit Then
Console.WriteLine("No digit")
Valid = False
End If
If Valid Then
Console.WriteLine("Password accepted. Press any
key to continue.")
objMyFileWrite = New
StreamWriter("MyPassword.txt")'*** Part c ***
objMyFileWrite.WriteLine(MyString)'*** Part c ***
objMyFileWrite.Close()'*** Part c ***
Else

lOMoARcPSD|48000249
Console.WriteLine("Password rejected. Press any

key to continue.")
End If
End Sub
'******
'**** Part d ***

Sub CheckPassword(MyString As String)
Dim StoredPassword As String
objMyFileRead = New StreamReader("MyPassword.txt")
StoredPassword = objMyFileRead.ReadLine
If MyString = StoredPassword Then

Console.Write("Password matches. Press any key to
continue.")
Else
Console.WriteLine("Password does not match. Press
any key to continue.")
End If
End Sub
'******
'*** Part e ***

Sub ChangePassword(MyString As String)
Dim NewWord As String
Dim StoredPassword As String
objMyFileRead = New StreamReader("MyPassword.txt")
StoredPassword = objMyFileRead.ReadLine()

lOMoARcPSD|48000249
If MyString = StoredPassword Then

Console.Write("Please enter your new password ")
NewWord = Console.ReadLine()
NewPassword(NewWord)
Else
Console.WriteLine("Password incorrect cannot
change. Press any key to continue.")
End If
End Sub
'******
End Module
Java
import java.util.*;
import java.io.BufferedReader;
import java.io.PrintWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
class Chapter8Q14 {
// *** Part b ***
static void NewPassword(String MyString) {
int Length;
Length = MyString.length();
boolean Valid = true;
if (Length > 20) {

System.out.println("Too long");
Valid = false;
}

lOMoARcPSD|48000249
if (Length < 10) {

System.out.println("Too short");
Valid = false;
}
int Counter = 0;
boolean NoSpace = true;
while ((Counter < Length) & NoSpace) {

if (MyString.substring(Counter,Counter +
1).compareTo( " ") == 0) {
System.out.println("Spaces not allowed");
Valid = false;
NoSpace = false;
}
Counter ++;
Counter = 0;
boolean UpperCase = false;
while ((Counter < Length) & !UpperCase) {
if (MyString.charAt(Counter) >= 'A' &&
MyString.charAt(Counter) <= 'Z') {
UpperCase = true;
}
Counter ++;
}
if(!UpperCase) {
System.out.println("No uppercase letter");
Valid = false;
}

lOMoARcPSD|48000249
Counter = 0;
boolean Digit = false;
while ((Counter < Length) & !Digit) {
if (MyString.charAt(Counter) >= '0' &&

MyString.charAt(Counter) <= '9') {
Digit = true;
}
Counter ++;
}
if(!Digit) {
System.out.println("No digit");
Valid = false;
}
if (Valid) {
System.out.println("Password accepted");
try {
FileWriter myFileWriter = new
FileWriter("MyPassword.txt", false); //***
Part c ***
PrintWriter myPrintWriter = new
PrintWriter(myFileWriter); //*** Part c ***
myPrintWriter.printf("%s" + "%n", MyString);
//*** Part c ***
myPrintWriter.close(); //*** Part c ***
} catch (IOException e) { //*** Part c ***
e.printStackTrace(); //*** Part c ***
}
}
else {
System.out.println("Password rejected");
}
}

lOMoARcPSD|48000249
// ******
// *** Part d ***

static void CheckPassword(String MyString) {
String StoredPassword = "";
try {
FileReader myFileReader = new
FileReader("MyPassword.txt");
BufferedReader myBufferReader = new
BufferedReader(myFileReader);
StoredPassword = myBufferReader.readLine();
}
if (MyString.compareTo(StoredPassword) == 0) {
System.out.println("Password matches");
}
else {
System.out.println("Password does not match");
}
}
//******

lOMoARcPSD|48000249
// *** Part e ***

static void ChangePassword(String MyString) {
String StoredPassword = "";
String NewWord = "";
try {
FileReader myFileReader = new
FileReader("MyPassword.txt");
BufferedReader myBufferReader = new
BufferedReader(myFileReader);
StoredPassword = myBufferReader.readLine();
}
if (MyString.compareTo(StoredPassword) == 0) {
System.out.print("Please enter your new password ");
NewWord = myObj.nextLine();
NewPassword(NewWord);
}
else {
System.out.println("Password incorrect cannot
change");
}
}
//******

lOMoARcPSD|48000249
// *** Part a ***

public static void main(String args[]) {
boolean Quit = false;
while (!Quit) {
System.out.println(" Password Management");
System.out.println(" 1 Enter a new password");
System.out.println(" 2 Check your password");
System.out.println(" 3 Change your password");
System.out.println(" 4 Quit");

int option = myObj.nextInt();
String MyPassword = myObj.nextLine();
switch (option) {
case 1:
System.out.print("Please enter your
password ");
MyPassword = myObj.nextLine();
NewPassword(MyPassword);
break;
case 2:
password ");
CheckPassword(MyPassword);
break;
case 3:
password ");
ChangePassword(MyPassword);
break;
case 4:
Quit = true;
break;

lOMoARcPSD|48000249
default:
System.out.println("Incorrect option
chosen");
}
}
//******
}
}
b Test data Expected output Actual output
Password Too short
No digit
Password rejected
Password99 Password accepted
password99 No uppercase letter

Password rejected
Password99! Password accepted
ExtraLargePassword9999999 Too long

Password rejected
21 Too short
Spaces not allowed
No uppercase letter
Password rejected
15 Important points to note when writing your program:

• There is not one 'correct' solution to this problem. Any solution is acceptable but your
program must:
• perform all the tasks set out in the question
• use a range of appropriate programming techniques that cover all the tasks set out in
the question. These tasks must be executed by your program in a logical order
• use appropriate data structures, which have been given meaningful names, to store all
the data mentioned in the question. If any data structures are named in the question,
then those names must be used in your program
• be fully commented to ensure that it can be understood
• The array name must be Game[]
• All other data structures must have meaningful names.

lOMoARcPSD|48000249
• Procedures must be used, for example to:

• set up an empty array at the start of each game
• display the contents of the array
• enter a player’s move – this could use a parameter for O or X
• check for a winner
• Your program must be fully commented.
• Your answer to 12 will help you to start your program.
9 Databases
1 a • table: a collection of records …
• … where each record contains data about a similar item, e.g. a student.
• record: a collection of fields about the same item …
• … there are the same number of fields in each record.
• field: a single piece of data …
• … that is given a data type.
b Four from:
• text/alphanumeric – e.g. a description of a part
• character – e.g. S, M or L for the size of a part
• Boolean – e.g. true or false, sold or not
• integer – e.g. number of parts in stock
• real – e.g. price of an item 12.99
• date/time – e.g. a date such as 18/12/2020
2 a Field 1: Type
Data type: text
Reason: as the name given to the type of ice cream is a series of characters
Sample: choc ice
Field 2: Flavour
Data type: text
Reason: as the name given to the flavour of ice cream is a series of characters
Sample: vanilla
Field 3: Size
Data type: text
Reason: as the size of the ice cream is stored as a word
Sample: Small
Field 4: NumberInStock
Data type: integer
Reason: as the number in stock will be a whole number
Sample: 56

lOMoARcPSD|48000249
Field 5: ReOrderLevel
Data type: integer
Reason: as the re-order level will be a whole number
Sample: 24
b i A primary key is required to uniquely identify each record.
ii All of the fields could be repeated in another record.
iii Name: IceCreamID
Date type: text
Reason: so the field can contain letters and digits
Sample: IC007
c
3 a Structured Query Language (SQL) is the standard query language …

… for writing scripts to obtain information from a database.
b i • SELECT: Fetches specified fields (columns) from a table …
• … queries always begin with SELECT
ii • FROM: Identifies the table to use …
• … queries always include FROM.
iii • WHERE: Includes only records (rows) in a query that match a given condition …
• … WHERE is an optional command.
iv • SUM: Adds the values in a specified field …
• … must be an integer or real field.
c ORDER BY and COUNT

lOMoARcPSD|48000249
d Query 1
SELECT TYPE, Size
FROM ICECREAM
WHERE ((NumberInStock)>0)
ORDER BY NameIceCream;
Query 2
SELECT SUM(NumberInStock)
FROM ICECREAM;
Query 3
SELECT Count(NumberInStock)
FROM ICECREAM
WHERE(NumberInStock < ReOrderLevel);
4 a i • Licence …
• … as it uniquely identifies the teacher.
ii Name: text
Title: text
Licence: text
Gender: char or Boolean
Subject: text
Class: text
iii Learner’s own database
b i • Name …
• … so that any copying errors during data entry can be identified.
ii • Any of Gender, Title, Licence, Subject, Class could be validated …
• … as there are only a small number of different entries allowed for each.
iii Learner’s own validation
c i Miss Sing
Mr Ling
ii SELECT Title, Name
FROM TEACHER
WHERE Subject = "Science"
ORDER BY Name;
iii SELECT Title, Name
FROM TEACHER
WHERE (Subject = "Science" OR Subject = "Mathematics")
ORDER BY Name;
iv SELECT COUNT (Subject)
FROM TEACHER
WHERE (Subject = "Mathematics");
v Learner’s own check

lOMoARcPSD|48000249
d SELECT Name, Class

FROM TEACHER
ORDER BY Class;
10 Boolean logic
1 a OR gate
b NAND gate
c XOR gate
2 A B C Working area X
0 0 0 0
0 0 1 0
0 1 0 0
0 1 1 1
1 0 0 1
1 0 1 1
1 1 0 0
1 1 1 1
3 a (A AND B) OR (NOT B AND C)

or
(A.B) + ( .C)
b
4 a A B Working area X
0 0 0
0 1 1
1 0 1
1 1 1
b OR gate

lOMoARcPSD|48000249
5 a A B C Working area X
0 0 0 0
0 0 1 1
0 1 0 0
0 1 1 1
1 0 0 0
1 0 1 1
1 1 0 0
1 1 1 1
b As the output X exactly matches input C, the entire logic circuit could be removed and
the output connected directly to the input C.
6 a A B C Working area X
0 0 0 1
0 0 1 1
0 1 0 0
0 1 1 0
1 0 0 1
1 0 1 1
1 1 0 0
1 1 1 1
b AND gate
7 a (A AND NOT B) AND (B OR C)
or
(A. ).(B + C)
b

lOMoARcPSD|48000249
8 a ((NOT T AND A) OR (T AND P)) OR (NOT A AND P)

or
( .A + T.P) + ( .P)
b
c T A P Working area X
0 0 0 0
0 0 1 1
0 1 0 1
0 1 1 1
1 0 0 0
1 0 1 1
1 1 0 0
1 1 1 1
9 a

lOMoARcPSD|48000249
b A B C Working area X
0 0 0 0
0 0 1 1
0 1 0 0
0 1 1 1
1 0 0 0
1 0 1 1
1 1 0 1
1 1 1 1
c X Y Z Working area Q
0 0 0 0
0 0 1 0
0 1 0 0
0 1 1 1
1 0 0 0
1 0 1 0
1 1 0 1
1 1 1 1
10 a ((A AND B) AND NOT A) OR (B OR NOT C)

or
(A.B). + (B + )
A B C Working area X
0 0 0 1
0 0 1 0
0 1 0 1
0 1 1 1
1 0 0 1
1 0 1 0
1 1 0 1
1 1 1 1
11 a (A AND B) OR (NOT A AND NOT B)

or
(A.B) + ( . )

lOMoARcPSD|48000249
12 a
b A B C Working area X
0 0 0 1
0 0 1 1
0 1 0 1
0 1 1 1
1 0 0 1
1 0 1 0
1 1 0 0
1 1 1 1


Computer Science Student Workbook Answers 2

Uploaded by

Copyright:

Available Formats

Computer Science Student Workbook Answers 2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Computer Science Student Workbook Answers 2

Uploaded by

Copyright:

Available Formats

lOMoARcPSD|48000249

Answers to Algorithms, Programming and Logic Workbook

Computer Science (Sorbonne University Abu Dhabi)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Cambridge IGCSE™ and O Level Computer Science

Answers to Algorithms, Programming

Cambridge IGCSE and O Level Computer Science Teacher's Guide 1

Answers to Algorithms, Programming and Logic Workbook

Process flowchart symbols are used to show actions.

Cambridge IGCSE and O Level Computer Science Teacher's Guide 2

Answers to Algorithms, Programming and Logic Workbook

8 a Loop 1: FOR .. TO .. NEXT:

Cambridge IGCSE and O Level Computer Science Teacher's Guide 3

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 4

Answers to Algorithms, Programming and Logic Workbook

ii Pre-condition loop WHILE .. DO .. ENDWHILE

Dim Counter As Integer

Cambridge IGCSE and O Level Computer Science Teacher's Guide 5

Answers to Algorithms, Programming and Logic Workbook

Dim Counter As Integer

Cambridge IGCSE and O Level Computer Science Teacher's Guide 6

Answers to Algorithms, Programming and Logic Workbook

Dim Counter As Integer

Cambridge IGCSE and O Level Computer Science Teacher's Guide 7

Answers to Algorithms, Programming and Logic Workbook

9 a DECLARE Number, Total : REAL

Cambridge IGCSE and O Level Computer Science Teacher's Guide 8

Answers to Algorithms, Programming and Logic Workbook

10 a input – the number of guesses allowed

Cambridge IGCSE and O Level Computer Science Teacher's Guide 9

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 10

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 11

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 12

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 13

Answers to Algorithms, Programming and Logic Workbook

16 a OUTPUT T should be INPUT T

Cambridge IGCSE and O Level Computer Science Teacher's Guide 14

Answers to Algorithms, Programming and Logic Workbook

Cambridge IGCSE and O Level Computer Science Teacher's Guide 15

Answers to Algorithms, Programming and Logic Workbook

print("Integer values entered", Number1, Number2, Number3)

print("Integer values assigned and stored" , Number1,

Console.WriteLine("Integer values entered " & Number1

Console.WriteLine("Integer values assigned and stored

Cambridge IGCSE and O Level Computer Science Teacher's Guide 16

Answers to Algorithms, Programming and Logic Workbook

int Number1, Number2, Number3;

System.out.print("Please enter the first whole number ");

System.out.println("Integer values entered " +

System.out.println("Integer values assigned and

Cambridge IGCSE and O Level Computer Science Teacher's Guide 17

Answers to Algorithms, Programming and Logic Workbook

Console.Write ("Please enter your chosen option ")

Cambridge IGCSE and O Level Computer Science Teacher's Guide 18