Scribd
Upload
12 views2 pages

Module 9 - Basic Router Configuration

Uploaded by

thaithiennhan19
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
12 views2 pages

Module 9 - Basic Router Configuration

Uploaded by

thaithiennhan19
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

QN=113 (10851) Which parameter does the router use to choose the path to the destination when

there are multiple routes available?


a. the lower metric value that is associated with the destination network
b. the lower gateway IP address to get to the destination network
c. the higher metric value that is associated with the destination network
d. the higher gateway IP address to get to the destination network
ANSWER: A
MARK: 0.2
UNIT: FINAL NWC204_RE
LO:
MIX CHOICES: No

QN=141 (10863) Floor(config)# interface gi0/1


Floor(config-if)# description Connects to the Registrar LAN
Floor(config-if)# ip address 10.118.63.65 255.255.255.0
Floor(config-if)# no shutdown
Floor(config-if)# interface gi0/0
Floor(config-if)# description Connects to the Manager LAN
Floor(config-if)# ip address 10.118.62.196 255.255.255.0
Floor(config-if)# no shutdown
Floor(config-if)# interface s0/0/0
Floor(config-if)# description Connects to the ISP
Floor(config-if)# ip address 10.62.63.254 255.255.255.0
Floor(config-if)# no shutdown
Floor(config-if)# interface s0/0/1
Floor(config-if)# description Connects to the Head Office WAN
Floor(config-if)# ip address 209.165.200.87 255.255.255.0
Floor(config-if)# no shutdown
Floor(config-if)# end
Refer to the exhibit. A network administrator is connecting a new host to the Manager
LAN. The host needs to communicate with remote networks. What IP address would
be configured as the default gateway on the new host?
a. 10.118.62.196
b. 10.118.62.1
c. 10.62.63.254
d. 209.165.200.87
e. 10.118.63.65
ANSWER: A
MARK: 0.2
UNIT: FINAL NWC204_RE
LO:
MIX CHOICES: No

QN=183 (10825) While trying to solve a network issue, a technician made multiple changes to the
current router configuration file. The changes did not solve the problem and were not
saved. What action can the technician take to discard the changes and work with the
file in NVRAM?
a. Issue the reload command without saving the running configuration.
b. Delete the vlan.dat file and reboot the device.
c. Close and reopen the terminal emulation software.
d. Issue the copy startup-config running-config command.
ANSWER: A
MARK: 0.2
UNIT: FINAL NWC204_RE
LO:
MIX CHOICES: No

You might also like