School DANGGAYON INTEGRATED SCHOOL Grade Level 7

GRADES 1 TO 12 Teacher DONNEH RAY D. BASILLO Learning Area T.L.E

DAILY LESSON LOG September 3, 5, 6
Teaching Dates and Time TTh - 8:15-9:00 AM / TThF - 1:00-1:45PM
Quarter FIRST QUARTER

DAYS MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

I. CURRICULUM CONTENT, STANDARDS, AND LESSON COMPETENCIES
A. Content Standards The learners demonstrate an understanding of using productivity software
B. Performance Standards The learners perform the utilization of productivity tools in a safe and responsible manner
C. Learning Competencies The learners shall be able to create presentations with a master slide, and motion paths.
*Learning Objectives At the end of the lesson, the learners shall be able to:
1. discuss the rules in creating a presentation
2. create a presentation using master slide, motion path and animation pane
D. Content Presentation Software
● rules in creating presentations
● master slide
● animation (motion path)
● animation pane
E. Integration SDG 4: Quality Education
SGD 9: Industry, Innovation and Infrastructure
6. simple rules to help you create effective PowerPoint presentations. (n.d.). https://www.prezent.ai/zenpedia/presentation-rules
PowerPoint: Slide Master View. (n.d.). GCFGlobal.org. https://edu.gcfglobal.org/en/powerpoint/slide-master-view/1/
Writtenhouse, S. (2022b, May 3). How to use Motion Path animations in Microsoft PowerPoint. How-To
Geek. https://www.howtogeek.com/798590/how-to-use-motion-path-animations-in-microsoft-powerpoint/
II. LEARNING RESOURCES
Put objects or text on a custom motion path. (n.d.). https://support.microsoft.com/en-us/office/add-a-motion-path-animation-effect-
f3174300-0d24-4671-a1c2-e286b41efba6
PowerPoint 2016: Animating Text and Objects. (n.d.-b). GCFGlobal.org. https://edu.gcfglobal.org/en/powerpoint2016/animating-text-and-
objects/1/
III. TEACHING AND LEARNING PROCEDURE
DAY 1
1. Short Review
Ask the following students?
A. Activating Prior Knowledge
1. What have you learned using Word Processing software?
2. Were these learnings helpful to you?
3. Do you think you can also apply them using Presentation Software?
B. Establishing Lesson Purpose 1. Lesson Purpose
Ask the students the following questions:
1. What can you say with the presentation carrying a good design?
2. What about this poorly designed presentation?
3. What could be done to improve the presentation?
4. Are you familiar with the basic rules in creating a presentation?
Using presentation software is an effective way of sharing information
while also keeping the audience hooked and helping them remember what
was told to them. A good presentation design is crucial in making your
 audience engaged in your presentation.
2. Unlocking Content Vocabulary
 Master Slide- it has built-in layouts, designs and background graphics.
 Motion Path- the technique of customizing the animation of an object in
order to follow a certain path.
 Animation Pane- command enables a user enables to control and view
every effect on the active slide.
C. Developing and Deepening DAY 2 SUB-TOPIC 4 – Animation
Understanding SUB-TOPIC: 1 - Rules in Creating SUB-TOPIC: 2 - Master Slide Pane
Presentations 1. 1. Explicitation 1. Explicitation
1. Explicitation You might have noticed that some slides The Animation Pane is an
Creating an engaging PowerPoint have background and other essential part of the
presentation requires following certain elements that cannot be changed and Animations tab. This
rules. In this lesson, we will explore the cannot be deleted when in the Normal command enables you to
key principles to help you create View. What might be the reason why? This is control and view every effect
presentations that will capture the because the slides have built-in on the active slide. The
audience's attention. layouts, designs and background graphics Animation Pane allows you to
● One idea in one slide. This allows the embedded using the Master Slide. If easily edit and rearrange
audience to focus on a concept on you want to edit or change the layout, design effects, which is very
each slide thus, making it easier for them and background of all your helpful if you have multiple
to comprehend and remember. slides, you need to edit the Master Slide. effects. It also allows you to
● Follow the 5 rules. The 5/5/5 rule is a The Master Slide is designed to achieve have an easy and
simple guide to keep things short. consistency and professional-looking quick preview of the animation
Observe five words per line, no more presentation. In PowerPoint presentation, effects that you have selected.
than five lines per slide, and of having you could use Slide Master View to The effect’s
five slides in a row with lots of text. This modify all the slides and the slide layouts of start option and timing can also
rule helps keep your audience your presentation. You can also be set using the Animation
engaged and paying attention. modify the layout of the individual slides. Pane.
● Avoiding slide overload. Limit your Here are some of the most common uses of 2. Worked Example
elements to six or fewer on each slide. the Slide Master View. Guided Practice: Open the
This keeps things focused. Also, use ● Modify backgrounds: it customizes the “Practice” presentation file and
short text, add some space (white background for all of your slides perform the
space), and include images or graphics at the same time. When you adjust one of following steps:
smartly. the layouts in the Slide Master To open the Animation Pane:
● Mastering slide design. A clear and view, all of the slides with that layout will 1. From the Animations tab,
meaningful heading is a must. It change. click the Animation Pane
helps your audience understand what is ● Rearrange placeholders: If you command.
coming up. Make sure your accidentally rearranged the placeholders 2. 2. The Animation Pane will
heading is a short and clear summary of on each slide, you can save time by open on the right side of the
your entire presentation. rearranging them using the Slide window. It
● Effective slide design. Use colors that Master view. 3. shows all of the effects for
stand out, keep backgrounds ● Customize text formatting: You could also the current slide following the
simple, and use big fonts. As much as use the Slide Master view to order in
possible, do not use italics, change the text color on all slides at once. 4. which they will appear.
underlining, or all caps because they ● Create unique slide layouts: You could use 5.
might take away the audience’s focus Slide Master view to create 6. To reorder
from your main message. your own unique layouts. Custom layouts 7. effects from the Animation
● Appropriate animation. Avoid using too can include your Pane:
many animations. Research own background graphics and placeholders. 8. 1. On the Animation Pane,
shows that an audience does not like too ● Customizing Slide Layouts click and drag an effect up or
many movements. Small, simple 1. Click the View tab from the down.
animations can help highlight key points Ribbon. In the Master 9. 2. You may also use the up
and make your audience Views group, click Slide and down arrow from the
remember things better. Using too many Master view. Animation Pane.
might distract the audience and 2. Locate and select the desired 10. 3. Simply select the object
make your presentation less effective. layout in the left navigation with effect and click the up or
● Utilize visual presentations. Use pane. You can hover the down arrow.
images and graphs to add interest and mouse over each layout to 11. To preview effects from the
engagement to your presentation but see which slides are Animation Pane:
make sure to observe balance. Avoid currently using that layout 12. 1. From the Animation
complex graphics that may distract your in the presentation. Pane, click the Play or Play All
audience. When you decide to use 3. In some layouts, the background graphics button.
a graph or chart, make sure to explain may be hidden. To show the 13. 2. The effects for the
what it shows so everyone graphics, uncheck the box next to Hide current slide will play.
understands the information you are Background Graphics found 14. To change an effect's start
sharing. in the Background group of the Slide Master option:
2. Worked Example tab from the Ribbon. 15. 1. From the Animation
Using the sample presentations that were 4. Add, move, or delete any objects as Pane, select an effect. A drop-
shown earlier (the good and the bad desired. down arrow will appear
design), determine if the two (2) followed 5. If you want to change the arrangement of 16. next to the effect.
the seven (7) rules. Complete the table the placeholders, you can 17. 2. Click the drop-down
below by putting a √ mark if the move, resize, or delete any of them. arrow and select one of the
presentation followed a rule otherwise, 6. When you're finished, click the Close three start options.
put X. Master View command on 18. Start on Click will start the
Rules Presentation1
(Good)
Presentation 2
(Bad)
the Slide Master tab. effect when the mouse is
One idea in one 7. All slides using the layout will be updated. clicked,
slide ● Create New Slide Layouts 19. Start With Previous will
Follow the 5 1. Click the View tab from the Ribbon. In the start the effect at the same
rules
Avoiding slide Master Views group, click time as the previous
overload Slide Master view. 20. effect, and
Mastering slide 2. Click the Insert Layout command. The 21. Start After Previous will
design
Effective slide
new slide layout will appear. start the effect when the
design 3. The layout will include title and footer previous effect ends.
Appropriate placeholders by default. Click 22. To open the Effect Options
animation
Utilize visual the Title and Footers boxes in the Master dialog box:
presentation Layout group to toggle 1. From the Animation Pane,
these placeholders on and off. select an effect. A drop-down
4. You can now add background graphics, arrow will appear
3. Lesson Activity shapes, and pictures to the next to the effect.
Once again, look at the sample slide layout. You can also move, adjust, and 2. Click the drop-down arrow,
presentation (given by your teacher) with delete the existing then select Effect Options.
the placeholders. 3. The Effect Options dialog
“GOOD” design. Discuss how the seven 5. To add new placeholders, click the down box will appear. Click the drop-
(7) rules in creating a presentation arrow of down menus
were utilized. the Insert Placeholder command, then select and select the desired settings
the desired placeholder and enhancements.
type. 4. You can add a sound to the
6. Click and drag to draw the placeholder on animation, add an
the slide. effect after the animation is
over, or animate text in a
2. Worked Example different
Guided Practice: sequence.
1. Open the presentation file that the teacher To change the effect timing:
gave you. 1. From the Effect Options
2. On the slide master, change the dialog box, select the Timing
Background Style. Choose a background tab.
from any of the styles shown. 2. From here, you can add a
3. From the navigation pane, click Title Slide delay before the effect starts,
Layout. Try to change the change
location of the placeholders. Try to change the duration of the effect, and
the Font and Font Colors. control whether the effect
4. Apply the rules in creating the repeats.
presentation in order to have a good match
of background and element colors.
5. Click the Title Content Layout. Try to
make changes to placeholders, font
and font colors. Try to add also other
elements like shapes.
6. Apply the seven (7) rules in customizing
the layout of your master slide.
7. Insert a New Slide Layout. Try to add
background graphics.
8. Add also shapes, and pictures to the slide
layout by clicking Insert
Placeholder.
9. Move, adjust, and delete (if necessary) the
existing placeholders.
10.Show your output to your teacher.
11.Click Close Master view and save the
presentation. Put “Practice” as the
filename
3. Lesson Activity.
See Learning Activity Sheet – Activity No. 1
for the complete details of the
activity.
DAY 3
SUB-TOPIC 3 - Motion Path
1. Explicitation
Have you seen a moving object in a
presentation that follows a certain path
or route? This technique of customizing the
animation of an object is called
Motion Path.
Animations in Microsoft PowerPoint come in
 a variety of forms. Effects can
be applied to shapes, pictures, and text.
However, if you want to create your
own, you can select a motion path animation
to move your object wherever you
like
PowerPoint's Motion Path animations allow
you to add zigzag, loop, spiral,
or swoosh effects to your objects. You can
adjust the points to establish the
precise path you want your object to go once
you have chosen the motion path
you want to utilize.
2. Worked Example
Guided Practice:
1. Open the “Practice” presentation file
2. Click an object that you want to animate.
3. On the Animations tab from the Ribbon,
click Add Animation.
4. Scroll down to Motion Paths, and pick one
from the list.
5. If you would like to draw the path, choose
Custom Path from the list.
6. Draw the path in the slide. To stop
drawing a custom path, press Esc.
7. If you do not like any of the motion paths
in the list, click More Motion
Paths.
8. Click an animation to see a preview of
how the object will move on your slide.
9. Select the motion path you want then click
OK.
10.You should see the movement on the
object in your slide.
11.Try to change the direction,
sequence, origin and path.
12.Click Effect Options from the
Animations tab and choose from given
lists.
13.You should see the effect on the object
you have selected.
14.In case you want to remove an
animation, on the slide, click the
motion path (dotted line with arrow),
and then press Delete.
15.Save the changes you have made to your
“Practice” presentation.
D. Making Generalizations DAY 4
 1. Learners’ Takeaways
In this week’s lessons, I have learned that in order to create effective
presentations I must do the following:
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
IV. EVALUATING LEARNING: FORMATIVE ASSESSMENT AND TEACHER’S REFLECTION
1. Formative Assessment
Answer the following questions.
A. Evaluating Learning 1. What is the function of a Master Slide?
2. When do you use Motion Paths?
3. How important is the Animation Pane?
B. Teacher’s Remarks
C. Teacher’s Reflection

Prepared by: Checked by:

DONNEH RAY D. BASILLO APRIL R. ATIENZA EdD

Teacher I Head Teacher III