UP STREAM PRESSURE PORT WITH CAP M/S. CORNER HANGER BULK HEAD FOR M8 SIZE TUBE MOC: AL PO NO : D DOWNSTREAM PRESSURE D REMOVABLE MEASURING PORT L CLIT (04NOS) OD: 9mm, ID: M6 M6, KNURLING NUT HOUSING SPECIFICATION MOC: GI MODEL TM-RSC FILTER
C SIZE H*W mm UP STREAM PAO ALUMINIUM POWDER CONCENTRATION SILICON MEASURING PORT MOC COATED EXTRUSION,(13G) GEL OD: 9mm, ID: M6 ü RAL 9010 BARE AL ISOMETRIC VIEW REMOVABLE RAL 9002 OTHERS,SPECIFY STRAP(x4) AIR INLET ALUMINIUM POWDER AERO FOIL DAMPER COATED EXTRUSION, AIR INLET (RAL 9010) EXF SS-304, MAT FINISH, CAPSULE PERFORATED SHEET 25 25 DESIGN, 60% OPENING) B ü [18G] [16G] D AIR DIFFUSER 125
C PLATE C FILTER SPECIFICATION MODEL ASTROCEL II-RSC FILTER d d1
ISOMETRIC ASSEMBLY MICRO-GLASS FIBRE
FILTER MEDIA DRAWING MEDIA FILTER GRADE H14 A h1 x w1 B SIZE h1*w1*d1 mm FRONT VIEW hxw HxW EFFICIENCY 99.999% DOWN TO 0.3µm
SECTION B-B MOC
ALUMINIUM ANODIZED EXTRUSION CLOSED SEALANT POLYURETHANE KNURLING 5MM ALLEN KEY GROVE NUT FOR WORM GEAR OPERATING GEL MATERIAL SILICON GEL FROM CLEAN ROOM SIDE FACE GUARD ON BOTH Detail 'C' OPERATING TEMP. 70°C H
SIDE OF THE FILTER
CUSTOMER/ B CONTRACTOR SCOPE FILTER LOADING FROM CLEAN ROOM SIDE B
GAD Media Depth
100 3rd Angle 50
G 50
This Document/Drawing is a Property of AAF International, India
BOTTOM VIEW Unit Detail 'A' Detail 'D' mm Scale SPECIFICATION FOR FILTERS SPECIAL FEATURES 1:1 FLANGE AIR PERFORATED CEILING PLENUM SIZE (h*w*d) SNO SIZE (H*W) FILTER SIZE MEDIA FLOW IPD FPD DAMPER SHEET CUT OUT SIZE QTY 1. CORNER HANGER MOC - AL Date Model Number (h1*w1*d1) DEPTH SIZE (E*F) IN CFM (G*H) RECOMMEND HEIGHT WIDTH HEIGHT WIDTH DEPTH 2. REMOVABLE L CLIT - 04 NOS 11-01-2022 TMRSC TOP AIR ENTRY 545 220Pa 3. KNURLING INSERTS MOC - GI 1.1 550 550 480 480 220 450 450 149 96 @1.27 ±10% 500Pa 255x255 565 565 530 530 - 4. UPSTREAM PAO CONCENTRATION PORT MOC - AL Quantity Drawing Number A m/s 5. DOWN STREAM PRESSURE PORT MOC - AL A NOTE: AAF-TMRSC-TAE-450X450-220-02 1.Fixing of Housing in the ceiling along with accessories will be in Customer/ Contractor scope. 2.L Clit as been designed based on 50mm ceiling thickness. Revision Drawn by Checked by Approved by 3.We recommend to Inject the Aerosol from the duct only from the top side, recommended distance of 750mm for homogenous distribution across filter surface area. R0 ARAVIND GAURAV DEEPAK.N 6 5 4 3 2 1
