DPYQ JEE Main PART Test - 01

for
JEE Main & NEET Aspirants
Topic : MECHANICS Time: 75 Min Marking: +4 –1
Section - A : MCQs with Single Option Correct 5. A bullet of mass 50 g has an initial speed of 1 ms–1, just
before it starts penetrating a mud wall of thickness 19 cm. If the
1. A, B, C and D are four different physical quantities having wall offers a mean resistance of 2.5 × 10–2 N, the speed of the
different dimensions. None of them is dimensionless. But we bullet after emerging from the other side of the wall is close to:
know that the equation AD = C ln (BD) holds true. Then which (A) 0.4 ms–1 (B) 0.1 ms–1
of the combination is not a meaningful quantity ? (3) 0.9 ms –1 (D) 0.7 ms–1
C
(A) –C (B) A2 – B2C2 6. A solid sphere of radius R gravitationally attracts a particle
BD
A ( A  C)
placed at 2R from its centre with a force F1. Now a spherical
(C) –C (D) R
B D cavity of radius   is made in the sphere (as shown in figure)
2
2. A person climbs up a stalled escalator in 30 s. If standing and the force becomes F2. The value of F1 : F2 is :
on the same but escalator running with constant velocity he
takes 20 s. How much time is taken by the person to walk up the
moving escalator ? B A
O
R m
(A) 37 s (B) 27 s
(C) 24 s (D) 12 s
M

3. Two forces P and Q of magnitude 2F and 4F, respectively, (A) 25 : 36 (B) 50 : 41

are at an angle with each other. If the force Q is doubled, then (C) 41 : 50 (D) 9 : 7
their resultant also gets doubled. Then, the angle is :
7. The density of a material in the shape of a cube is
2
 determined by measuring three sides of the cube and its mass.
(A) cos–1  (B) 60º
8 If the relative errors in measuring the mass and length are
 3 respectively 1.5% and 2%, the maximum error in determining
(C) cos –1    (D) 120º the density is :
 8
(A) 7.5% (B) 3.5%
(C) 4.5% (D) 6%
4. Two blocks of masses 3 kg and 5 kg are connected by a
metal wire going over a smooth pulley. The breaking stress of 8. Two blocks A and B of masses mA = 1 kg and mB = 3 kg are
75 kept on the table as shown in figure. The coefficient of friction
the metal is × 102 Nm–2. What is the minimum radius of the
2 between A and B is 0.3 and between B and the surface of the
wire ? (take g = 10 ms–2) table is also 0.3. The maximum force F that can be applied on B
horizontally, so that the block A does not slide over the block B
is : (Take g = 10 m/s2)

B F

3kg

5kg

(A) 1000 cm (B) 0.1 cm (A) 16 N (B) 40 N

(C) 100 cm (D) 10 cm (C) 12 N (D) 24 N
Download Test Papers from PG Telegram Channel - https://t.me/physicsgalaxyworld Page 2
9. A rod of length 100 cm is pivoted at one end. It is raised direction but with one fourth of its original speed. What is the
such that it makes an angle of 30° from the horizontal as shown mass of the second body ?
and released from rest. Its angular speed when it passes through (A) 1.8 kg (B) 1.2 kg
the horizontal (in rad s–1) will be: (g = 10 ms–2) (C) 1.5 kg (D) 2.0 kg

15. The stream of a river is flowing with a speed of 2 3 km/h.

A swimmer can swim at a speed of 4 km/h. What should be the
30º direction of the swimmer with respect to the flow of the river to
cross the river straight ?
(A) 60° (B) 150°
30
(A) 30 (B) (C) 90° (D) 120°
2
30 20 16. A body of mass 5 kg slide down with an acceleration of
(C) (D)
2 3 2 m/s2 on a rough inclined plane having a slope of 30º. The
external force required to take the same body up the plane with
10. Let l, R, C and V represent inductance, resistance, the same acceleration will be : (g = 10 m/s2)
(A) 50 N (B) 14 N
lCV
capacitance and voltage, respectively. The dimension of (C) 6 N (D) 20 N
R
in SI units will be : 17. A block of 500 g mass moves with a uniform speed in a
(A) [LTA] (B) [LA–2] horizontal circular groove, with vertical side walls of radius
(C) [AT2] (D) [LT2] 80 cm. If the block takes 40 s to complete one round, the normal
l  force by the side walls of the groove is :
Sol. 10  R =T (A) 0.0314 N (B) 9.859 × 10–2 N
 
and [CV] = AT (C) 9.859 × 10–3 N (D) 9.859 × 10–4 N
 lCV 
  R  = T · AT = AT2 Ans. (C) 18. A man (mass = 60 kg) and his son (mass = 20 kg) are standing
  on a frictionless surface facing each other. The man pushes his
son so that he starts moving at a speed of 0.60 ms–1 with respect
11. An automobile, travelling at 40 km/h, can be stopped at a
to the man. The speed of the man with respect to the surface is:
distance of 40 m by applying brakes. If the same automobile is
(A) 0.20 ms–1 (B) 0.15 ms–1
travelling at 60 km/h, the minimum stopping distance, in metres, –1
(C) 0.47 ms (D) 0.28 ms–1
is: (Assume no skidding)
(A) 75 m (B) 160 m
19. A block of mass 10 kg is kept on a rough inclined plane as
(C) 100 m (D) 90 m
shown in the figure. A force of 10 N is applied on the block. The
coefficient of static friction between the plane and the block is
12. A butterfly is flying with a velocity 4 2 m/s in North-East 0.6. What should be the minimum value of force P, such that the
direction. Wind is slowly blowing at 1 m/s from North to South. block does not move downward ? [Take g = 10 ms–2]
The resultant displacement of the butterfly in 4 seconds is : P
(A) 12 2 m (B) 15 m
(C) 3 m (D) 20 m k g
10

13. A disc rotates about its axis of symmetry in a horizontal 10N

plane at a steady rate of 1.75 revolutions per second. A coin 45°
placed at a distance of 1 cm from the axis of rotation remains at
rest on the disc. The coefficient of friction between the coin (A) 32 N (B) 25 N
(C) 23 N (D) 38 N
and the disc is: (g = 10 m/s2)
(A) 0.5 (B) 0.7
(C) 0.12 (D) 0.6 20. A block of mass 3.9 kg is at rest at the edge of a table, of
height 1 m. A bullet of mass 0.1 kg collides with the block and
14. A body of mass 3 kg makes an elastic collision with a sticks to it. If the velocity of the bullet is 20 m/s in the horizontal
second body at rest and continues to move in the original direction just before the collision then the kinetic energy just

Download Physics Galaxy Mobile app for Best Online Courses for JEE & NEET Download link : https://bit.ly/PhysicsGalaxyApp
Download Test Papers from PG Telegram Channel - https://t.me/physicsgalaxyworld Page 3
before the combined system strikes the floor, is: [Take g = box not to topple before moving is ______.
10 m/s2. Assume there is no rotational motion and loss of energy F
after the collision is negligible.]
(A) 21.0 J (B) 40.5 J b

(C) 19.0 J (D) 20.0 J

Section- B: INTEGER Answer Type Questions

21. A small block slides down from the top of hemisphere of

23. A body of mass 2 kg is driven by an engine delivering a
radius R = 6 m as shown in the figure. The height h at which the
constant power 1 J/s. The body starts from rest and moves in a
block will lose contact with the surface of the sphere is _____.
straight line. After 81 seconds, the body has moved a distance
(Assume there is no friction between the block and the
(in m) _____.
hemisphere)
24. A person of 50 kg mass is standing on the rim of a circular
(R – h) platform of mass 200 kg rotating about its axis as 4 revolutions
R A
per minute (rpm). The person now starts moving towards the
 h
centre of the platform. What will be the rotational speed (in rpm)
O of the platform when the person reaches its centre _____.

25. A block starts moving up an inclined plane of inclination

22. Consider a uniform cubical box of side a on a rough floor 30° with an initial velocity of v0. It comes back to its initial position
that is to be moved by applying minimum possible force F at a 0
point b above its centre of mass (see figure). If the coefficient of with velocity . The value of the coefficient of kinetic friction
3
b
friction is  = 0.5, the maximum possible value of 100 × for a n
a between the block and the inclined plane is close to . The
10 3
value of ‘n’ _____.

* * * * *

Solutions of Telegram Papers

Solutions & Benchmarking of NEET DPYQ Test Papers will be available on Physics Galaxy Mobile app
after few days of release of papers. Students can download the PG Mobile app from link given below.

Download link of PG Mobile app

https://bit.ly/PhysicsGalaxyApp

Download Physics Galaxy Mobile app for Best Online Courses for JEE & NEET Download link : https://bit.ly/PhysicsGalaxyApp
 DPYQ JEE Main PART Test - 01
for
JEE Main & NEET Aspirants
Topic : MECHANICS Time: 75 Min Marking: +4 –1

ANSWER KEY
Section - A : MCQs with Single Option Correct

1. (D) 2. (D) 3. (C) 4. (D)

5. (C) 6. (D) 7. (A) 8. (D)
9. (B) 10. (C) 11. (D) 12. (D)
13. (C) 14. (A) 15. (B) 16. (A)
17. (C) 18. (B) 19. (D) 20. (B)

Section- B: INTEGER Answer Type Questions

21. (4) 22. (50) 23. (486) 24. (6)

25. (8)

For BEST Academic Resources, Join PG Telegram Channel

JEE Main & Advanced NEET IPhO KVPY NTSE

Download quality test papers & watch videos on critical SUCCESS tips
and strategies by Ashish Arora Sir