DRIVES CATALOG 2012

INTERNET

drive.web AUTOMATION

AC DRIVES

DC DRIVES

Bardac

MOTORS

SERVICE

Everything normally in stock!

Bardac Corporation, 40 Log Canoe Circle, Stevensville, Maryland 21666 USA www.bardac.com www.driveweb.com

Since our founding in 1992 we have worked hard to build our reputation around key goals: Innovative technologies. Reliable products. Unrelenting customer support. All catalog items normally in stock. Competitive pricing.

Bardac

Our factory in Stevensville, Kent Island, Maryland

Please visit us take Route 50 East from Washington DC or Annapolis and cross the Chesapeake Bay Bridge to Kent Island take Exit 37 (the first on Kent Island) Route 8 North, towards Stevensville after 1/2 mile take the second left onto Schooner Parkway then left onto Log Canoe Circle and we are the second building to your right we look forward to seeing you.

Were tough to beat!

Table of Contents

Nothings changed!

Page
3-5 6-7 8-9 10 - 11 12 - 15 12 - 15 15 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 33 34 - 35 36 - 38 39 40-45 46 46 46 47 47 48

AUTOMATION & PROGRAMMABLE CONTROLLERS

AC DRIVES

DC DRIVES MOTORS ENGINEERING SERVICE INDEX

drive.web Automation technology savvy design & configuration tools savvy-SFD Signal Flow Diagram tools savvyPanel touch screen HMI technology drive.web Automation Products: smarty speedy drive.web apps Engineered Applications Winders, process line coordination, registration, line shaft, indexing AC Drives Overview Closed Loop Vector - up to 350 HP Sensorless Vector - up to 250 HP HVAC, fans & pumps - up to 350 HP General Purpose VFDs - up to 15 HP NEMA 12 & NEMA 4 Drives - up to 100 HP Drive options Single Phase SP & PSC motor controls - up to 1.5 HP DC Drives - Single Phase - up to 10 HP Servo - up to 2 Amps 3-Phase - up to 2000+ HP AC & DC Motors, Motor Accessories Modulus Packaged Drives Power Quality, Drive Isolating Transformers, Line Reactors & Line Filters Online Product Support & Training Customer Support, Service, Safety, Quality, Environmental Notes, Terms Index

Specifications ... At the time of going to press we believe the information in this catalog to be accurate. However, the specifications of products may be amended at any time, so please check with us when ordering to ensure that such changes will not affect your requirements.

drive.web SMART AUTOMATION

savvy System Design & Configuration Tools
Eth ern et

COST EFFECTIVE FOR SYSTEMS OF ANY SIZE OR COMPLEXITY WORLD CLASS - NO EQUAL!

smarty Programmable Controller with comms ports

speedy DC Drive Controller

Ether net

speedy AC Drive Controller

speedy ModbusTCP/IP Gateway Programmable Controller with USB port for total system access

smarty Programmable Controller & Distributed i/o

savvyPanel Touch screen operator stations with control tools & WiFi roaming. For PC, iPad or iPhone

Build and operate complete control systems over Ethernet Program individual drives, controllers & operator stations Make drag & drop connections between devices Configure touch screen PC operator stations Create roaming HMIs in iOS devices - iPad, iPhone, etc. Provide Internet access to your entire system Add utilities such as watchdogs, event emails, loggers, etc. Support interfaces to existing devices via Modbus, EIP, etc.

Bardac.com

drive.web automation

drive.web
1
CONCEPT & PLANNING
From your initial sketches and notes create drive.web savvy Phantoms offline to identify all your drives, remote i/o, MMI interfaces, gateways, etc.

performance integration of drives & controls in systems of any size or complexity.

drive.web uses distributed control over Ethernet to provide cost effective, high

DESIGN & CONFIGURATION

Place any control function blocks you need then drag & drop between parameters in your Phantoms to make all your device interconnections. The savvy Signal Flow Diagrams and powerful navigation aids give you a clear intuitive view of your work. Information and help is always on the spot with hover text, links to the manual and contextual menus.

From the initial concept, through planning, design, construction, testing, installatation and operation the drive.web savvy tools provide all the vision, insight and help you need for a successful project.

3 4

CONSTRUCTION & TESTING

Simply connect all your drives and devices together over Ethernet and load your complete design into the devices form just one location. The system immediately comes alive for testing and monitoring.

INSTALLATION & OPERATION

Use drive.web savvy to provide real time monitoring and control of your entire system from any location. No running from drive to drive to check the set up or operational state! Use savvyPanel operator station technology to provide smart touch and roaming control from anywhere.

L
PRODUCTIVITY

MANAGEMENT & MAINTENANCE

Use savvy utilities to set up system performance criteria and monitor your productivity, machine state and process trends locally or remotely over the Internet.

smart automation
Configure & control individual drives & devices Design and operate complete drive systems Provide fast, peer-to-peer networking over Ethernet Create clear, graphical signal flow system documentation Easily interface to most other drives, MMIs, PLCs, etc. Build cost effective systems of any size or complexity Add Internet accessibility to your system Support worldwide enterprise integration

The innovative drive.web technology provides total control in one homogeneous environment with the entire system database resident in the drive.web devices.

products
savvy

Intuitive, graphical system design and device configuration tools with powerful navigation features, drag & drop connections, trend charting and online help.

savvyPanel
Innovative, touch screen operator station technology that runs on PC or iOS (iPad, iPhone, etc.). Build clear machine graphics, buttons, switches, meters and instrumentation and link to your control scheme. Provides multi-user, multi-level, password protected access via WiFi from anywhere to any system.

smarty

A range of drive.web programmable controllers with peer-to-peer networking over Ethernet or stand alone capability and a wide range of i/o and communications options. Intuitive, easy function block configurations are stored on board for instant field access.

speedy

A range of miniature, low cost, drive.web programmable controllers with peer-to-peer networking over Ethernet. Easily interfaced to almost any drive or control device.

Bardac.com

drive.web automation
savvy ... the smart automation tool.

Configure complete systems of any size or complexity. Provide multi-user, total access to your drives and systems from anywhere. Engineering Info
In complex products with a fixed set of features, such as drives, an Engineering Info window gives a organized overview of the key parameters, i/o and control features.

Configure drives, programmable controllers and savvyPanel operator stations.

Graphical Function Blocks

Simply click on any function button to drill down to the detailed graphical function block and view or change parameter values.

Standard Features Online or offline design of drive systems using intuitive tools with pre-engineered function blocks. Internet access to drives and systems for remote configuration, monitoring and process training. Provides easy import, export and cloning of device configurations. Dynamic graphics show real time state of switches, indicators, parameter values, etc. Low cost, full featured, Distributed Control capability with peer-to-peer networking. Multiple users, local or remote, can have concurrent real-time access to drives or systems. Function Block Libraries for winder controls, PID, drive synchronization, arithmetic, logic, etc. Deterministic connections provide high performance links between drives, PLCs, Operator Stations,
6
SCADA computers and other control products. drag & drop techniques make easy parameter connections between drives, control devices, etc. Dock feature enables key system parameters to be monitored and trended from one location. Powerful navigation features include drill down (to detail layers in drives and controllers), search, connection tags, jump, browse, pan and zoom for easy visual system comprehension. VPN (Virtual Private Networking) for secure Internet connectivity is supported. Password protection is provided at many levels for secure use.

Get savvy free from www.driveweb.com

The savvy tools and utilities are platform independent and run on Windows, Mac OSX, Unix, Linux and Solaris and they are all automatically updated as new features are released. Drives, programmable controllers, operator stations and complete systems are configured by making simple drag & drop connections between clear graphical function blocks.

Information always at your finger tips ...

Anywhere in the system you will have easy instant access to the information you need with several different types of resource ...

Right click on any active object such as a device, connection, parameter or function block to open the contextual menu Hover over any active object and see its key data appear at the top of the window. Hover over a button to see its function described. Look out for the information button. This will jump you to the relevant location in the user manual. The Help menu links you to the full user manual, and other getting started guides.

Trend Charting
You can collect any parameters of interest in a dock window and display as a trend chart. The trend time scale can be adjusted from 10 seconds to 2 days and the data can be exported in a .csv format for separate spreadsheet analysis.

Bardac.com

drive.web automation
savvy-SFD ... Signal Flow Diagram
The savvy-SFD option provides a powerful, graphical, Signal Flow Diagram interface with enhanced system wide navigation and the ability to produce clear, annotated, device and system documentation. Use savvy phantoms to create systems which can be downloaded later into the real devices.

savvy, easy, very smart

savvy-SFD features
8
Basic savvyPanel operator station functions included Create your own customized drawing sheets with choice of ISO or ANSI formats Signal flow diagrams provide a clear vision of your control scheme and its functionality Tags clearly specify the source, destination and location of connections between multiple pages. Entire drawing is stored in the drive.web devices for instant access in the field. Key parameters can be shown at the Signal Flow Diagram level for enhanced monitoring and control Connections are rubber banded so that function blocks can be moved on pages or between pages drag & drop connections can be made between any parameter anywhere in a system. Drawings can be user annotated. Powerful navigation features ensure fast searches and that you will never get lost. Password protection is provided at many levels for secure use.

savvy programming
It could not be easier, whether simply configuring a drive or designing a complete integrated system. A few simple steps are all that is needed to build a complete control scheme with signal flow documentation that is clear and easy to understand. Powerful navigation tools ensure that you will never get lost!

Create phantom devices or find real devices in your system in the Device Directory window.

Click on a Phantom or device to drill down to the Function Block Engine

Right click on any device or object to open its contextual menu and get information, change names, import/export data, etc.

Right click to open the Function Block selector

5 6
Click on a Function Block to drill down to the detail level ...

Drag and drop to make connections

Click on a parameter to change its value or state

Function Blocks are complete engineered system components. Their graphics are dynamic so that objects such as switches, indicators, etc., show their instantaneous state. A function block such as the PID above includes all the presets, resets, scaling, filters, clamps, etc., that you need for reliable implementation in the real world. savvy is your smart friend! With a few simple clicks you can build a system, set up a drive and document your work in a thoroughly professional manner - there is no equal!

Bardac.com

drive.web automation savvyPanel

Smart, touch screen operator station technology

Provides unprecedented flexibility in instrumentation, control and monitoring. Runs on any full featured, touch screen PC or on iOS devices (iPad, iPhone, iPod touch, etc.) Extensive library of objects such as pushbuttons, switches, meters, indicators, lamps, buzzers, etc. Extensive library of graphical image tiles to build smart machine and process graphics. Machine graphic tiles can be linked to detail control screens. Full savvyPanel configuration is stored in the drive.web devices for instant WiFi roaming access. Supports multiple screens with multiple pages. Provides hierarchal access to system groups, individual systems and multiple operator levels. Powerful multi-level password protection.

Example - Extrusion Coating Line

Master System Control Station Easily build your graphics and controls and link them to any location in your drives or process control system.

Operator Screen Touch a graphic tile such as the EXTRUDER to drill down to the detail screen

Total Control Touch an arrow link such as the TEMP CONTROL tile to drill down to the temperature control system Touch the MELT TEMP tile in any screen to set the master temperature setpoint.

10

savvyPanel app for iOS

savvyPanel running on a WiFi device is a powerful asset in you automation toolbox.

Walk around your machine with complete control at your finger tips! Roam around your plant and access every machine and process with ease! View your operations live, anywhere in the world, any time you like!

get started right now!

Download the FREE iOS savvyPanel app for your iPad, iPhone or iPod from the Apple iTunes store and you will immediately be able to access a real live drive system located in our plant in Stevensville, Maryland, USA.

C Touch the Roll Change button to reset the roll length to zero C Turn on all the section On/Off switches C Touch the Line Start button and watch the line accelerate, run and
automatically slow down to stop at the required length.

C Touch the Set Speed indicator at any time to change the line speed J Touch the parameter name to get info J Touch the square display symbol to close the setter
very smart automation!

Key features Auto screen orientation with lock Pinch to zoom Drag to pan Double tap for home Touch to open setters (Quickly flip to phone to tell the boss how well things are going or to order a pizza)

Bardac.com

11

drive.web automation
smarty & speedy ...
The drive.web smarty & speedy programmable controllers use distributed control over Ethernet to provide cost effective, high performance integration in systems of any size or complexity.

automation without limits

Smart distributed control concept:

No system bandwidth degradation with systems of any size One completely homogeneous environment for drives, controls, operator stations, i/o - everything! Complete data consistency throughout a system The ability to store the entire system configuration in the controllers for easy field total access The ability to manage total system program thread and hierarchy Consistent multi-level password protection

Key Features:

Ethernet peer-to-peer networking Gateway options for ModbusTCP/IP, EIP CANopen and others Internet access Graphical Signal Flow Diagram system documentation Additional i/o Easy interface to most operator stations, PLCs, SCADA, etc. Event driven emails from devices

Precision

16 bit integer basic arithmetic 32 bit floating point calculator functions 64 bit encoder pulse counting

Standard savvyPanel library

For iPad, iPhone, iPad and touch screen PC operator stations with arrows, meters, start and stop pushbuttons.

Standard function block library

smarty

Adders, Subtracters, Multipliers, Dividers, Clamps, Switches, Logic Event driven email messages Full featured PI controllers

Optional function block libraries

Advanced Process Control & PLC Winder Control Advanced Math Encoder Position & Indexing

Standards: CE, FCC part 15, IECS-003, UL/cUL in 2012

speedy

12

Winders & unwinders Web tension control Process line multi-drive coordination Position control Indexing Cyclic position control Electronic line shaft

Spindle orientation Registration control Encoder feedback for open loop drives Cut-to-length Speed profiling, MOP & draw Process recipe and mode control Temperature & process control

smarty - controllers with a wide range of i/o

Standard Features:

Used for all programmable control, peer-to-peer Ethernet networking and system integration tasks.

Easy interface to most drives Use networked or stand alone Internet accessible Peer to peer deterministic Ethernet networking 100baseTX or 10baseT Ethernet with auto-negotiation Full duplex supported Auto-MDIX per IEEE802.3ab (auto-crossover resolution) Optional Power over Ethernet (PoE, IEEE 802.3af) drive.web distributed control Intuitive, graphical function block programming tools Complete graphical configuration & documentation data stored in devices 16 basic i/o terminals each configurable includes: 8: 10V, 16 bit analog in or out or 24V digital in 8: 0-10V 16 bit analog in or 24/12/5V dig in or 24V dig out, source or sink Firmware field upgradable All circuit boards conformal coated for very high reliability SNTP server time/date synchronization support 100% backward compatible with all existing drive.web installations

Optional Features:

Smart, compact packaging 4 high x 4.75 deep x 0.9 wide (102 x 120 x 22 mm)

Full savvyPanel touch screen PC and iOS device capability Encoder input without marker 1 or 2 encoder inputs with marker and retransmit via external module 1 or 2 isolated or unisolated RS485 ports High voltage digital i/o isolator 6 additional digital inputs 4 channel 20KHz frequency i/o 24 channel extended digital i/o External thermocouple and RTD inputs ModbusTCP/IP, ModbusRTU, EIP/PCCC USB port for system wide programming coming soon

speedy - miniature controllers without i/o

Only 0.78 x 0.79 x 1.37 (20 x 20 x 35mm)

Serial interfaced to drives and third party devices via ModbusRTU or CANopen to provide low cost, improved performance, peer-to-peer Ethernet networking and full programmable control functions. So small it fits anywhere, does everything! Includes USB port for system wide programming and Ethernet ModbusTCP/IP. Available in either bond mount with tether or DIN rail mount with screw terminals or tether or embedded form.

Bardac.com

13

drive.web automation
smarty ... Models
dw210 dw211 dw212 dw213 dw214 dw215 dw216

Smart controllers with 100baseTX Ethernet, distributed control, 16 configurable analog/digital i/o and a wide range of i/o and communications options
smarty for standalone or networked applications General purpose programmable controller or drive interface controller smarty-sp dedicated interface controller for PL/X series DC Drives (mid 2012) smarty dedicated interface controller for ODE2 General Purpose AC Drives smarty dedicated interface controller for ODP Sensorless Vector Drives smarty dedicated interface controller for ODP2 Closed Loop Vector Drives smarty dedicated interface controller for Yaskawa F7 drive smarty dedicated interface controller for ODV2 HVAC & Pump Drives

speedy ... Models

dw220 dw221 dw222 dw223 dw224 dw225 dw226

Miniature smart controllers with 100baseTX Ethernet, ModbusTCP/IP, distributed control, USB port, serial port and a wide range of communications options
speedy generic interface controller with ModbusRTU master, DIN mount, w/terminals speedy plug-in controller for PL/X series DC drive speedy plug-in controller for ODE2 General Purpose drive speedy plug-in controller for ODP Sensorless Vector drive speedy plug-in controller for ODP2 Closed Loop Vector drive speedy plug-in controller for Yaskawa F7 drive speedy plug-in controller for ODV2 HVAC & Pump drive

Function Block Libraries -05 Advanced Process Control Function Block Library (FBL) (comparators, profilers, presets, latches, filters, counters, timers, PIDs and more) -06 Winder Control FBL (dia. calc., taper tension., torque comp.) -10 Advanced Math FBL (trigonometric, log, exponential) -11 Encoder Control FBL (shaft lock, indexing, registration for Options 40-44) -29 Solar FBL with sun position calculator Communications Options -04 Ethernet Modbus TCP/IP slave -25 Ethernet EIP/PCCC interface for AB PLCs -14 Power over Ethernet (2W max external load) -17* ModbusRTU slave (RS485) isolated port -18* ModbusRTU slave (RS485) isolated port + external encoder module interface port -19* ModbusRTU slave (RS485) isolated port + ModbusRTU (RS485) master unisolated -23* ModbusRTU master (RS485) isolated port + external encoder module interface port I/O Options -24* 6 extra digital inputs, 24V -26 savvyPanel iPad/iPhone & touch screen PC operator station interface -27* Frequency i/o, up to 20KHz. 2 ~in, 2 ~i/o, with 12V, 400mA regulated power supply -28* Extended digital i/o interface for Opto22 racks (24 channels) -30 115VAC digital i/o voltage isolator, up to 2 per smarty (each with 2, NO contacts + common and 4, 115VAC inputs +common) -31 230VAC digital i/o voltage isolator, up to 2 per smarty (each with 2, NO contacts + common and 4, 230VAC inputs +common) Encoder I/O Options -15* Internal encoder input (2-24V, differential A & B (no marker) w/5VDC encoder supply) -16* External encoder module interface port smarty external encoder module (needs a smarty dw210 option -16, -18, -22 or -23) -40 1 external encoder, 2-24V + marker, 5VDC encoder supply & two 24V event inputs or -42 2 external encoder, 2-24V + marker, 5VDC encoder supply & two 24V event inputs -45 External encoder module RS422 retransmit outputs (1A, 1B, 2A, 2B) or -46 External encoder module 24V retransmit outputs (1A, 1B, 2A, 2B) * Options are mutually exclusive X = Available if not excluded

OPTIONS

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

X X X X X X X X X X X X X X

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

X X X X X

X X X X X

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

S = Standard feature

14

dw220 dw221 dw222 dw223 dw224 dw225 dw226 X X X X X X X X X X X X X X X X X X X X X X X X X X X X S S S S S S S X X X X X X X X X X X X X X

smarty

speedy

dw210 dw21 1 dw212 dw213 dw214 dw215 dw216

speedy-sp
MODEL dw111- speedy-sp for PL-Series Digital DC Drives Open card, mounts internal to drive and plugs directly onto the high speed option bus to provide high performance peer-to-peer networking over Ethernet and drive.web programmable control functions. Note: Fully compatible with Sprint Electric PL and Eurotherm Controls ERPL DC drives. Available Options: 02, ModbusRTU Slave also, 04, 05, 06, 10
Dimensions: 7.8w, 4.0h, 1.5d (198, 101, 38mm)

drive.web apps
Pre-configured, engineered solutions for common applications
These options are pre-programmed units with generic solutions for key applications. The packages are a great design aid. They include basic signal flow diagram and wiring drawing documentation and are easily edited to suit your specific installation using savvy with the SFD Signal Flow Diagram option.

smarty
dw210 dw21 1 dw212 dw213 dw214 dw215 dw216 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

speedy
dw220 dw221 dw222 dw223 dw224 dw225 dw226 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

CONFIGURED OPTIONS FOR smarty & speedy

-1101 -1102 -1103 -1104 -1105 -1106 -1107 -1109 -1110 -1117 -1118 Open loop constant tension center winder (includes options 05, 06) Closed loop dancer controlled winder (includes options 05, 06) Closed loop loadcell controlled winder (includes options 05, 06) Slip core winder controller (includes options 05, 06) Speed lock with encoder feedback (includes options 05, 11, 16, 42 & 45 or 46) Coordinated drive, line master controller (includes options 05) Controller with networking for an analog/logic interface to drive (includes opts 05) Phase lock, electronic line shaft with registration (opts 05, 11, 16, 42 & 45 or 46) Three PID Controllers with integral reset and hold (includes options 05) Encoder cyclic position control w/indexing (includes opts 05, 11, 16, 42 & 45 or 46) Sun tracking for solar energy systems (includes options 05, 11, 16, 42 & 45 or 46)

X X X X X X X X X

High performance film winder

21 section embossing line

Airport transit car load sharing system

Bardac.com

15

drive.web automation drive.web apps

WINDERS & UNWINDERS

smarty programmable controllers use the drive.web distributed control technology to bring easy, cost effective intelligence to high performance drive systems. smarty aps are pre-configured generic packages for common applications: smarty OPTION-1101 Open Loop Constant Tension Center Winder smarty OPTION-1102 Closed Loop Dancer Controlled Center Winder smarty OPTION-1103 Closed Loop Load Cell Controlled Center Winder smarty OPTION-1104 Closed Loop Slip Core Winder
To learn more about the drive.web control technology concepts download the FREE drive.web savvy configuration tools from www.driveweb.com and follow the getting started guides in the Help menu or join one of our weekly free online training seminars its easy!

These generic configurations can easily be edited by the intuitive drive.web savvy graphical tools to suit the particular application. The clear signal flow diagrams are stored in the controllers for reliable access in the field. The basic smarty packages include 16 flexible analog/logic i/o in a small DIN rail mounting, Internet accessible unit (4.1 high, 4.8 deep, 0.9 wide) with 10/100baseTX Ethernet and plug-in terminals. Standard features include: Fully editable configurations and drawings Process control & winder function block libraries Web break sensing Diameter memory, preset and hold Optional features include: Linear or hyperbolic taper tension Over/under winding Multiple core presets Line drive coordination Integral reset Manual or auto-splicing modes Adaptive control for high speed systems Encoder inputs Standstill tension mode ModbusTCP/IP over Ethernet Jog/run/slack take up modes Serial communications Turret indexing mode ... and more. Anti-reverse clamps Core speed matching

16

drive.web - web handling excellence

smarty OPTION-1 101
OPEN LOOP CENTER WINDER
Special features include ... Static and dynamic friction compensation Inertia compensation Diameter calculation Torque compensation Torque demand range limits

Drive Interface Analog or serial port

Drive Interface Analog or serial port

smarty specials are very

Operator Interface Analog, Ethernet or serial port

easy to interface to most line and winder drives, operator stations and PLCs over Ethernet, RS485 serial communications or via analog and logic wired connections

smarty OPTION-1 102

CLOSED LOOP DANCER CONTROLLED CENTER WINDER

Special features include ... Output for e/p (electrical-to-pressure) air valve control Diameter calculation or sensor input Optional loadcell input Dancer limit inputs Winder speed range limits
Drive Interface Analog or serial port Drive Interface Analog or serial port

Operator Interface Analog, Ethernet or serial port

smarty OPTION-1 103

Special features include ... Loadcell input Diameter calculation or sensor input Winder speed range limits Loadcell high/low tension alarm outputs
Drive Interface Analog or serial port Drive Interface Analog or serial port

Download the savvy programming tools free from www.driveweb.com and edit the demo phantom controllers or create your own phantoms

Try it out!

CLOSED LOOP LOADCELL CONTROLLED CENTER WINDER

Operator Interface Analog, Ethernet or serial port

Bardac.com

17

drive.web automation
smarty app
OPTION-1106 Process Line Coordination
Standard function blocks used in combinations of smartys and speedys can be easily configured to provide line drive coordination in systems of any size or complexity.

smarty Dancer Section

speedy Master Section

smarty Draw Section

smarty Loadcell Section

ETHERNET LAN

Runs on iPad, iPhone or most touch screen PCs

savvyPanel Operator Station

Remote Internet Access

Functions such as linear, S and hyperbolic ramps are used to provide master references. Programmable logic and switch functions are used to provide line run, line jog, local jog, interlocks, etc. PIDs, profilers, registration, indexing, phase lock and arithmetic blocks provide precise section control. Torque compensators, diameter calculators and taper functions are used for winder control.

18

smarty app

OPTION-1109 Registration & Electronic Line Shaft

Encoder retransmit

Encoder retransmit

Roaming in from an iPhone

Ethernet
The Registration & Electronic Line Shaft package is designed for applications such as print registration, synchronized component handling, position control, cut-to-length, etc., where precision drive coordination and spindle orientation are required.

Standard graphical function blocks for registration and speed locking make these complex processes quick and easy to configure and use. The encoder retransmit option provides buffered encoder signals for secure use in multiple locations.

Bardac.com

19

drive.web automation
smarty app
OPTION-1117 Indexing & Cyclic Positioning
The optional Encoder Function Block Library available in the smarty includes a set of engineered function blocks for use in precision positioning applications such as packaging machines, machine center tool loaders, inventory carousels, stackers, etc.

Key features
Auto origin checking Auto index calculation Auto calculation of shortest move from point to point 64-bit encoder counts

smarty app

OPTION-1118 Sun Position Calculator

The Solar Function Block Library includes functions that provide precision calculation of the sun zenith and azimuth angles for use in applications such as solar energy systems. The units can be synchronized with the SNTP server time and date and include a T input parameter to compensate for the difference between UTC and Terrestrial Time for precise positioning of parabolic solar concentrators.

Key Features
Set up for any latitude, longitude and altitude. Fast calculation for use in mobile systems. SNTP synchronization support. Terrestrial Time correction input.

20

drive.web

smart utilities
The E-Mail function block available in every drive.web device enables you to send alerts, event notices, status reports, etc., to management, quality controllers, plant engineers in any location. It is easy to set up and it ensures that key process issues are delivered to the right place at the right time.

drive.web

smart ideas

WiFi Roaming Interface

There are many inexpensive third party WiFi routers that when plugged into a drive.web Ethernet network provide secure, robust, roaming system access in an industrial environment using an iOS device such as an iPad or iPhone.

Enterprise Integration The powerful system wide access inherent in the

drive.web technology provides a great backbone on which to build integrated solutions in your entire global enterprise without additional complex data processing requirements. Multilevel password protection enables safe access for offsite accountants, production controllers and corporate management.

Online Training & System Support

The IP addressing capability in every drive.web device ensures easy support for field service and live online training for machine operators, system designers, plant maintenance engineers, etc. If an internet connection is available near your machine or process it takes less than 1 minute to set up a live connection to our engineers or any other off site location. drive.web provides system wide access from any single location on your LAN - very smart, very easy!

Bardac.com

21

AC drives

P2 Series Closed Loop Vector

High performance coordinated drive for: Process automation Converting Printing Machine tools Up to 100 HP at 230 volts Up to 350 HP at 460 Volts IP20 package up to 15 HP - 50C NEMA12 (IP55) 15 to 250 HP - 40C NEMA 1 (IP40) 300 to 350 HP - 40C Closed loop speed better than 0.1% 150% overload, 60 secs (200%, 4 secs) Up to 200% torque at zero speed AC Induction & PM motor modes Built in brake transistor EMC filter Quiet - with switching up to 32KHz DC Bus sharing Safe Torque Off function (IEC61508 SIL 2 & IEC62062 SIL 2) Modbus or CANopen port Plug-in control terminals Options drive.web programmable control Extended i/o EIP, ModbusTCP, ProfibusDP, DeviceNet OLED display Remote keypad savvyPanel touch screen HMI

ODP Series Sensorless Vector

Constant torque, heavy duty drive for: Material handling Conveyors Extruders General purpose machine control Up to 100 HP at 230 volts Up to 250 HP at 460 Volts Up to 60 HP at 575 Volts Standard IP20 - 50C Optional NEMA12 (IP55) up to 7.5 HP - 40C Sensorless speed control better than 1% 150% overload, 60 secs Built in brake transistor (not in size 1) EMC filter Quiet - with switching up to 32KHz Power loss ride through ModbusRTU port Plug-in control terminals Infra-red PDA programming port Configurable i/o Hours run log Easy programming Options drive.web programmable control Extended i/o EIP, ModbusTCP, ProfibusDP, DeviceNet Remote keypad Encoder feedback savvyPanel touch screen HMI

V2 Series HVAC Variable Torque

Variable torque, fan & pump drive for: HVAC Water treatment Climate control Flow control Up to 100 HP at 230 volts Up to 350 HP at 460 Volts NEMA4X (IP66) to 15HP - 40C (indoor) NEMA12 (IP55) 15 to 250HP - 40C NEMA 1 (IP40) 300 to 350 HP Smart energy optimization 110% overload, 60 secs,(125%, 2 secs) Motor flux braking Quiet - with switching up to 32KHz Power loss ride through Drive fault auto bypass Sleep mode with auto-boost Fire override mode Pump blockage detect/clear Pump clean, dry & preheat modes Pump cascade control ModbusRTU, BACnet OLED display Options drive.web programmable control Extended i/o EIP, ModbusTCP, ProfibusDP, DeviceNet Remote keypad Power disconnect savvyPanel touch screen HMI

TOUGH DRIVES FOR INDUSTRY

22

E2 Series General Purpose VFD

Constant torque, heavy duty drive for: General purpose machine control Pumps and blowers Conveyors Mixers To 1.5 HP at 110V in, 230V 3 out To 5 HP at 230 volts To 15 HP at 460 Volts Standard IP20 - 50C Optional NEMA12 (IP55) to 10 HP - 40C 150% overload, 60 secs (175%, 2 secs) Spinstart into rotating motor Built in brake transistor (sizes 2 & 3) Motor flux braking Adjustable skip frequency Quiet - with switching up to 32KHz Power loss ride through ModbusRTU port Configurable i/o Simple programming On board help card DIN rail and foot mount (IP20) (size 1 & 2) Options drive.web programmable control Extended i/o EIP, ModbusTCP, ProfibusDP, DeviceNet Remote keypad savvyPanel touch screen HMI

NEMA 4X - IP66 Series E2 for Harsh Environments

Constant torque, heavy duty drive for: Food processing Agricultural Mining, cement Petrochemical To 1.5 HP at 110V in, 230V 3 out To 5 HP at 230 volts To 10 HP at 460 Volts Standard NEMA 4X (IP66) - 40C (indoor) Dust tight Washdown Chemical resistant ABS enclosure Corrosion protected heat sink Spinstart into rotating motor Built in brake transistor (sizes 2 & 3) Motor flux braking Adjustable skip frequency Quiet - with switching up to 32KHz Power loss ride through ModbusRTU port Compact packaging Options drive.web programmable control Power isolator switch, speed pot, F/R switch EIP, ModbusTCP, ProfibusDP, DeviceNet Remote keypad savvyPanel touch screen HMI

E2 Single Phase VFD For SP & PSC motors

Variable torque, fan & pump drive for: Fans & blowers Centrifugal pumps Fume extractors Air flow control To 0.75 HP at 110 Volts To 1.5 HP at 230 Volts Standard IP20 - 50C Optional NEMA 12 (IP55) - 40C NEMA 4X (IP66) - 40C(indoor) For motor types: Shaded Pole (SP) Permanent Split Capacitor (PSC) Built in brake transistor (sizes 2 & 3) Motor flux braking Adjustable skip frequency Quiet - with switching up to 32KHz Power loss ride through ModbusRTU port Innovative smart boost start Simple programming DIN rail and foot mount (IP20) Options drive.web programmable control Extended i/o EIP, ModbusTCP, ProfibusDP, DeviceNet Remote keypad savvyPanel touch screen HMI

Bardac.com

23

AC drives

OPTIDRIVE P2

CLOSED LOOP VECTOR DRIVES

High performance Induction & PM Motor Control NEMA12 packaging 15 - 250HP with through panel mount option
FEATURES

0.5 TO 350 HP

Multiple Modes: Closed Loop Vector for high performance Open loop PM Motor Control Sensorless vector & V/Hz control Up to 200% torque at zero speed Sensorless speed regulation better than 1% Torque control DC bus sharing Safe Torque Off function Output to 500Hz (V/F Mode), 100Hz (Vector Mode) Built-in 100% rated DB transistor up to 350HP Integral PI controller drive.web savvy function block programming Silent running with up to 32KHz switching 200% starting torque Bipolar 12 bit analog input (isolated +/-10V or 4-20mA) ModbusRTU, RS485 port CANopen port Filters & DC chokes 25-250 HP, line chokes 300-350HP Single phase input up to 125 hp Power loss ride through Process control options Programmable i/o Hours run log & trip log Cartridge fans for easy maintenance (NEMA12 drives) Options: Encoder feedback Additional basic & smarty i/o options EIP, Modbus TCP/IP, Profibus, DeviceNet, BACnet Memory stick with bluetooth interface Remote keypad 2Khz output in V/Hz mode OLED text display

Dimensions Size

2 10.1 257 7.4 188 9.4 238

3 12.2 310 8.3 211 10.1 256

4 17.3 440 6.8 173 9.1 230

5 21.3 540 9.3 235 10.6 270

6 34.1 865 13.0 330 13.4 340

7 50.4 1280 13.0 330 14.6 370

8 78.8 2000 20.3 516 19.7 500

Standards Pending: UL C-UL CE C-Tick

Height (ins) Height (mm) Width (ins) Width (mm) Depth (ins) Depth (mm)

P2 very smart drives

The drive.web automation technology uses distributed control over Ethernet to provide cost effective systems integration for systems of any size or complexity. savvyPanel Easy operator stations options with touch screen PCs or iOS devices such as iPad, iPhone

drive.web smart automation

powerful programmable control functions peer-to-peer over Ethernet smart iPad or touch screen PC operation Easy system wide Internet access

24

Models & Ratings Standard IP20 Packages

With EMC Filter & DB transistor 200-240V 10%, 1-ph in, 230V, 3-ph motor Model HP Amps Size ODP2-22010-1HF42 1 4.3 2 ODP2-22020-1HF42 2 7 2 ODP2-22030-1HF42 3 10.5 2 200-240V 10%, 3-ph in, 230V, 3-ph motor Model HP Amps Size ODP2-22010-3HF42 1 4.3 2 ODP2-22020-3HF42 2 7 2 ODP2-22030-3HF42 3 10.5 2 ODP2-32050-3HF42 5 18 3 380-480V 10%, 3-ph in, 460V, 3-ph motor Model HP Amps Size ODP2-24010-3HF42 1 2.2 2 ODP2-24020-3HF42 2 4.1 2 ODP2-24030-3HF42 3 5.8 2 ODP2-24050-3HF42 5 9.5 2 ODP2-34075-3HF42 7.5 14 3 ODP2-34100-3HF42 10 18 3 ODP2-34150-3HF42 15 24 3

Specifications
Input Ratings Supply Voltage Supply Frequency Displacement PF Phase Imbalance Inrush Current Power Cycles Output Ratings Power Output 200 - 240 10% 380 - 480 10% 48 - 62 Hz > 0.98 3% Maximum allowed < Rated current 120 per hour max, evenly spaced 230V, 1-ph in: 1-3 HP (0.75-2.2 kW) 230V, 3-ph in: 1-120 HP (0.75-90 kW) 400V, 3-ph in: 0.75-160kW 460V, 3-ph in: 1-350 HP 150% for 60 secs, 200% for 4 secs. 0-500Hz in V/Hz mode (0.1 Hz res) (optional 2KHz) 0-100Hz in vector made Storage: -40C to 60C Operating: -10C to 40C (IP40, IP55 & IP66) -10C to 50C (IP20) Up to 1000m ASL without de-rating Up to 2000m Max UL Approved Up to 4000m Max (non UL) Above 1000m, de-rate 1% per 100m 95% non-condensing IP20 - Frame sizes 2 & 3 IP40 (NEMA 1) - Frame size 8 IP55 (NEMA 12) - Frame sizes 4 to 7 IP66 (NEMA 4X) - Optional sizes 2 & 3 Standard: built in keypad Optional: Remote keypad Optistick memory stick drive.web savvy software Bright red LED (sizes 2 & 3) Bright Green OLED text (sizes 4 to 7) Closed Loop (encoder) speed control Closed Loop (encoder) torque control Open Loop PM vector control Sensorless vector speed control V/F Voltage vector Energy optimized V/F 4 - 32 kHz effective Ramp to stop - adjustable 0.1-600 secs Safe Torque Off mode Motor flux braking (DC injection) Built in brake transistor Single point user adjustable 0-10v, 10-0v, 10v 0-20mA, 20-0mA, 4-20mA, 20-4mA Keypad ModbusRTU CANopen Optional drive.web Ethernet distributed control + programmable control, extra i/o, operator stations drive.web, ModbusTCP, EIP, DeviceNet, Profibus 24VDC, 100mA short protected 10VDC, 5mA for setpoint potentiometer 3 x Digital 10 to 30 VDC, response <4ms 2 x Analog/digital 2 x Analog, 0-10V, 0-20mA, 4-20mA 2 x Relay NO, 6A @ 250VAC, 5A @ 30VDC Internal PID with feedback display Last 4 trips stored with time stamp Current, temperature, DC Bus volts prior to trip Service life monitor with user adjustable interval Hours run Resettable and non-resettable kWh meters

Overload Capacity Output Frequency

Ambient Ratings

Temperature

Altitude

Humidity Enclosures Ingress Protection

NEMA12 (IP55) Packages

With EMC Filter, DB transistor, DC Chokes 200-240V 10%, 3-ph in, 230V, 3-ph motor Model HP Amps Size ODP2-42075-3HF4N 7.5 24 4 ODP2-42100-3HF4N 10 30 4 ODP2-42150-3HF4N 15 46 4 ODP2-52020-3HF4N 20 61 5 ODP2-52025-3HF4N 25 72 5 ODP2-62030-3HF4N 30 90 6 ODP2-62040-3HF4N 40 110 6 ODP2-62050-3HF4N 50 150 6 ODP2-62060-3HF4N 60 180 6 ODP2-72075-3HF4N 75 202 7 ODP2-72100-3HF4N 100 248 7 ODP2-72120-3HF4N 120 312 7 380-480V 10%, 3-ph in, 460V, 3-ph motor Model HP Amps Size ODP2-44150-3HF4N 15 24 4 ODP2-44200-3HF4N 20 30 4 ODP2-44250-3HF4N 25 39 4 ODP2-44300-3HF4N 30 46 4 ODP2-54040-3HF4N 40 61 5 ODP2-54050-3HF4N 50 72 5 ODP2-64060-3HF4N 60 90 6 ODP2-64075-3HF4N 75 110 6 ODP2-64120-3HF4N 120 150 6 ODP2-64150-3HF4N 150 180 6 ODP2-74175-3HF4N 175 202 7 ODP2-74200-3HF4N 200 240 7 ODP2-74250-3HF4N 250 302 7 Size 8 with EMC filter, DB transistor & line choke ODP2-84300-3HF44 300 370 8 NEMA 1 ODP2-84350-3HF44 350 450 8 NEMA 1 For single phase supply derate to 50% OPT2-ENCOD-IN Encoder feedback module OPT2-OPORT-IN Remote Keypad & Display

Programming

Keypad

Display

Control

Control Modes

Modulation Stop Mode Braking Skip Frequency Analog Setpoint Control Digital Setpoint Control

Automation Communications Options I/O Specification Power Supply Programmable Inputs Programmable outputs

Control & Monitoring

PID Fault Memory Data Logging Maintenance Indicator Monitoring

Bardac.com

25

AC drives

OPTIDRIVE PLUS
SENSORLESS VECTOR DRIVES

0.5 TO 250 HP

OPTIDRIVE PLUS FEATURES

GV 3 Technology Sensorless vector control 100% torque at zero speed Sensorless speed regulation better than 1% Encoder feedback speed regulation better than 0.1% Torque control Output to 500Hz (optional 2KHz) Output to 100Hz (Sensorless Vector Mode) Integral PI controller Rugged compact IP20 packaging Silent running with up to 32KHz switching 175% starting torque Built-in DB transistor available up to 250 hp Bipolar 12 bit analog input (isolated +/-10V or 4-20mA) ModbusRTU, RS485 port up to 115kbps Filters & line chokes available 25-250 hp Fiber optic & RS232/485 network options Optiwand optical programming tool Single phase input up to 60 hp Isolated control circuits Power loss ride through Process control options Programmable i/o Digital inputs 2 Analog inputs 1 Analog/digital inputs 1 Analog Outputs 1 Relay contact output 1 Hours run log 50C ambient Options Additional smarty i/o option Ethernet, Modbus TCP/IP option drive.web savvy programming option Encoder feedback option (better than 0.1%)

Standard IP20 enclosed drives

NEMA12 (IP55) enclosed drives for harsh & dirty environments

Standards: UL, C-UL, CE C-Tick

Automation Options

STANDARD IP20 ENCLOSED DRIVES SIZE HIGH WIDE DEEP LBS 1 6.1 3.15 5.1 2.5 2 10.25 3.95 6.9 5.9 3 10.25 6.75 6.9 12 4 20.5 13.4 8.7 63 Size 5, up to 150 amps 41.2 13.4 8.7 151 Size 5, 180 amps & over, 41.2 13.4 13 151 6 44.5 13.4 13 153 Size 6 Ext Choke 9.5, 9.8, 9.1 (240, 250, 230mm) NEMA 12 DRIVES 1 7.9 2 12.2 5.5 6.5 6.4 6.9 5.4 10.3

DIMENSIONS & WEIGHTS

drive.web
savvyPanel

(150, 80, 130mm, 1.1kg) (260, 100, 175mm, 2.6kg) (260, 171, 175mm, 5.3kg) (520, 340, 220mm, 28kg) (1045, 340, 220mm, 67kg) (1045, 340, 220mm, 67kg) (1130, 340, 330mm, 68kg)

(200, 140, 162mm, 2.4kg) (310, 164, 176mm, 4.6kg)

Easily add smart, graphical, operator stations with an iPad, iPhone or touch screen PC.

T h e smar ty o p t i o n provides drive.web Internet accessible distributed control technology over Ethernet together with powerful programmable automation features

smarty

26

ODP - SENSORLESS VECTOR DRIVE

STANDARD IP20 ENCLOSED DRIVES
SIZE 1 1 1 2 2 SIZE 3 3 3 4 4 4 4 5 5 5 6 6 SIZE 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 MODEL ODP -12005-US ODP -12010-US ODP -12020-US ODP -22020-US ODP -22030-US MODEL ODP -32040-US ODP -32050-US ODP -32075-US ODP -42100-US ODP -42150-US ODP -42200-US ODP -42250-US ODP -52300-US ODP -52400-US ODP -52600-US ODP -62750-US ODP -62100-US SPECIAL FEATURES Filter Filter Filter Filter, Brake Transistor Filter, Brake Transistor

220/240V, SINGLE PHASE IN, 230V, 3-PHASE OUT

HP 0.5 1.0 2.0 2.0 3.0

220/240V, 3-PH IN (1-PH 50% DERATE), 230V, 3-PH OUT

SPECIAL FEATURES Filter, Brake Transistor Filter, DC Chokes, Brake Transistor Filter, DC Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, External Line Chokes, Brake Transistor Filter, External Line Chokes, Brake Transistor HP 4 5 7.5 10 15 20 25 30 40 60 75 100

AMPS 2.3 4.3 7.0 7.0 10.5 AMPS 14 18 24 39 46 61 72 90 110 150 240 300 AMPS 2.2 4.1 5.8 9.5 14 18 24 29.5 * 39 46 61 72 88 110 150 180 202 240 300

Heavy duty, 150%, 60 sec., 50C rating Full torque at zero speed Open loop speed regulation better than 1% Nema 12 versions up to 7.5HP Hours run & KWh store RS485 up to 115Kbps 12 bit bipolar analog inputs Plug-in control terminals Spin start

380/480V, 3 PH IN (1-PH 50% DERATE), 380/460V, 3-PH OUT

MODEL ODP -24010-US ODP -24020-US ODP -24030-US ODP -24050-US ODP -34075-US ODP -34100-US ODP -34150-US ODP -34200-US ODP -44250-US ODP -44300-US ODP -44400-US ODP -44500-US ODP -54600-US ODP -54750-US ODP -54100-US ODP -54150-US ODP -64160-US ODP -64200-US ODP -64250-US SPECIAL FEATURES Filter, Brake Transistor Filter, Brake Transistor Filter, Brake Transistor Filter, Brake Transistor Filter, Brake Transistor Filter, DC Chokes, Brake Transistor Filter, DC Chokes, Brake Transistor Filter, DC Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, Line Chokes, Brake Transistor Filter, External Line Chokes, Brake Transistor Filter, External Line Chokes, Brake Transistor Filter, External Line Chokes, Brake Transistor HP @ 460V 1 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 150 160 200 250

500/600V, 3 PH IN, 500/600V, 3-PH OUT

SIZE 2 2 2 2 3 3 3 3 4 4 4 MODEL ODP-25010-US ODP-25020-US ODP-25030-US CO502628 ODP-25050-US ODP-25075-US CO502629 ODP-35100-US ODP-35150-US ODP-35200-US ODP-45300-US ODP-45400-US ODP-45600-US

* Not UL Listed at this rating

SPECIAL FEATURES HP @ 575V AMPS Filter, Brake Transistor - needs choke (CO502628) 1 1.7 Filter, Brake Transistor - needs choke (CO502628) 2 3.1 Filter, Brake Transistor - needs choke (CO502628) 3 4.1 External 600V Line choke required for above drives Filter, Brake Transistor - needs choke (CO502629) 5 6.1 Filter, Brake Transistor - needs choke (CO502629) 7.5 9.0 External 600V Line choke required for above drives Filter, DC Chokes, Brake Transistor 10 14 Filter, DC Chokes, Brake Transistor 15 18 Filter, DC Chokes, Brake Transistor 20 24 Filter, Line Chokes, Brake Transistor 30 39 Filter, Line Chokes, Brake Transistor 40 46 Filter, Line Chokes, Brake Transistor 60 62

ENCODER OPTIONS
ODP-ENCOD-US Encoder feedback option For precision speed control RTX Encoder retransmit option provides secure buffered encoder pulse output from the encoder feedback module

NEMA 12 - ODP SERIES SENSORLESS VECTOR i55

220/240V, 1PH IN, 230V, 3-PH MOTOR
SIZE 1 1 2 2 2 2 2 2 HP 0.5 1.0 2.0 3.0 AMPS 2.3 4.3 7.0 10.5 2.2 4.1 5.8 9.5 UNSWITCHED ODP-12005-US-i ODP-12010-US-i ODP-22020-US-i ODP-22030-US-i SWITCHED ODP-12005-US-iS ODP-12010-US-iS ODP-22020-US-iS ODP-22030-US-iS

500/600V, 3 PH IN, 500/600V, 3-PH MOTOR

380/460V, 3 PH IN, 380/460V, 3-PH MOTOR

1.0 2.0 3.0 5.0 ODP-24010-US-i ODP-24020-US-i ODP-24030-US-i ODP-24050-US-i ODP-24010-US-iS ODP-24020-US-iS ODP-24030-US-iS ODP-24050-US-iS

SIZE HP AMPS UNSWITCHED SWITCHED 2 1.0 1.7 ODP-25010-US-** ODP-25010-US-iS 2 2.0 3.1 ODP-25020-US-** ODP-25020-US-iS 2 3.0 4.1 ODP-25030-US-** ODP-25030-US-iS 2 5.0 5.8 ODP-25050-US-** ODP-25050-US-iS OD-IL163-US-i55 NEMA 12, 3-phase, line inductor required for 1 to 5HP, 600V drives above 2 7.5 9.0 ODP-25075-US-** ODP-25075-US-iS OD-IL263-US-i55 NEMA 12, 3-phase, line inductor required for 7.5HP, 600V drive above

UNSWITCHED drives have Nema 12 keypad and display SWITCHED drives have additional power isolator switch, FWD/REV switch & speed pot

Bardac.com

27

AC drives

V2 SERIES HVAC
VARIABLE TORQUE FAN & PUMP DRIVES

FEATURES

Dedicated HVAC and centrifugal pump controller Built in EMC filter standard DC bus chokes built in, sizes 4 - 7, line choke size 8 NEMA4X (IP66) to 10HP, NEMA12 (IP55) 10-250HP NEMA1 (IP40) 300-350 HP Multi-language, plain text OLED display for ease of use Energy optimization for maximum efficiency BACnet and ModbusRTU as standard Built-in hours run and kWh meters Built-in PID controller Advanced application functions for easy programming Engineered function blocks for optimum performance High frequency switching (up to 32kHz) for quiet running Built-in sleep and wake functions for on demand use Built-in motor flux braking Programmable i/o Optistick plug-in programming tool Power loss ride through 40C ambient HVAC functions: Bi-directional Fire Mode for emergency ventilation Pump functions: Blockage detection Adjustable cleaning cycle Multi-pump cascade control Pump stir mode Options: drive.web savvy smart automation savvyPanel graphical, touch screen operator technology Easy, off site Internet access to the complete system Ethernet peer to peer networking Ethernet ModbusTCP and EIP 3 additional relay outputs for cascade control Additional smarty i/o option Built in power isolator switch sizes 2 & 3 Standards - CE, C-Tick, (UL, C-UL, Pending)

0.5 TO 350 HP

Fan & pump features NEMA 4X (IP66) to 10 HP NEMA 12 (IP55) to 250 HP NEMA 1 (IP40) to 350 HP BACnet & ModbusRTU smart drives
Use the easy drive.web option to build smart controls schemes and iOS or PC graphical touch screen operator stations with roaming access, diagnostics and event driven email.

drive.web smart automation

powerful programmable control functions peer-to-peer over Ethernet smart iPad or touch screen PC operation Internet access The drive.web speedy Ethernet interface and automation controller mounts inside the drive enclosure for protected, reliable operation. It includes a USB port for easy system wide programming.

28

Models & Ratings NEMA 4X, NEMA12 & NEMA 1

200-240V 10%, 1-ph in, 230V, 3-ph motor Model HP Amps Size NEMA
size 2 with EMC Filter: ODV2-22010-1HF1X ODV2-22020-1HF1X ODV2-22030-1HF1X 1 2 3 4.3 7 10.5 2 2 2 4X 4X 4X

Specifications
Input Ratings Supply Voltage Supply Frequency Displacement PF Phase Imbalance Inrush Current Power Cycles Output Ratings Power Output 200 - 240 10% 380 - 480 10% 48 - 62 Hz > 0.98 3% Maximum allowed < Rated current 120 per hour max, evenly spaced 230V, 1-ph in: 1-3 HP (0.75-2.2 kW) 230V, 3-ph in: 1-120 HP (0.75-90 kW) 400V, 3-ph in: 0.75-160kW 460V, 3-ph in: 1-250 HP 110% for 60 secs, 125% for 2 secs. 0-120Hz, 0.1 Hz resolution Storage: -40C to 60C Operating: -10C to 40C Up to 1000m ASL without de-rating Up to 2000m Max UL Approved Up to 4000m Max (non UL) Above 1000m, de-rate 1% per 100m 95% non-condensing NEMA4X (indoor) sizes 2, 3; NEMA12 sizes 4 to 7 Standard: built in keypad Optional: Remote keypad Optistick memory stick drive.web savvy software Standard: Bright Green OLED Variable torque V/F Variable torque Energy optimized V/F 4 - 32 kHz effective Ramp to stop - adjustable 0.1-600 secs Coast to stop Motor flux braking (DC injection) Single point user adjustable 0-10v, 10-0v, 10v 0-20mA, 20-0mA, 4-20mA, 20-4mA Keypad ModbusRTU BACnet Optional drive.web Ethernet distributed control + programmable control, extra i/o, operator stations drive.web, ModbusTCP, EIP, DeviceNet, Profibus 24VDC, 100mA short protected 10VDC, 5mA for setpoint potentiometer 3 x Digital 10 to 30 VDC, response <4ms 2 x Analog/digital 2 x Analog, 0-10V, 0-20mA, 4-20mA 2 x Relay NO, 6A @ 250VAC, 5A @ 30VDC Internal PID with feedback display Last 4 trips stored with time stamp Current, temperature, DC Bus volts prior to trip Service life monitor with user adjustable interval Hours run Resettable and non-resettable kWh meters Fire mode for emergency ventilation Pump blockage detection Pump cleaning cycles Multi-pump cascade control Pump stir mode

200-240V 10%, 3-ph in, 230V, 3-ph motor Model HP Amps Size NEMA
sizes 2 & 3 with EMC Filter: ODV2-22010-3HF1X 1 4.3 ODV2-22020-3HF1X 2 7 ODV2-22030-3HF1X 3 10.5 ODV2-32050-3HF1X 5 18 sizes 4-7 with EMC filter & DC choke: ODV2-42075-3HF1N 7.5 24 ODV2-42100-3HF1N 10 30 ODV2-42150-3HF1N 15 46 ODV2-52020-3HF1N 20 61 ODV2-52025-3HF1N 25 72 ODV2-52030-3HF1N 30 90 ODV2-62040-3HF1N 40 110 ODV2-62050-3HF1N 50 150 ODV2-62060-3HF1N 60 180 ODV2-62075-3HF1N 75 202 ODV2-72100-3HF1N 100 248 ODV2-72120-3HF1N 120 312 2 2 2 3 4 4 4 5 5 5 6 6 6 6 7 7 4X 4X 4X 4X 12 12 12 12 12 12 12 12 12 12 12 12
Ambient Ratings

Overload Capacity Output Frequency Temperature Altitude

Humidity Enclosures Programming Ingress Protection Keypad

Display Control Control Modes Modulation

380-480V 10%, 3-ph in, 460V, 3-ph motor Model HP Amps Size NEMA
sizes 2 & 3 with EMC Filter: ODV2-24010-3HF1X 1 2.2 ODV2-24020-3HF1X 2 4.1 ODV2-24030-3HF1X 3 5.8 ODV2-24050-3HF1X 5 9.5 ODV2-34075-3HF1X 7.5 14 ODV2-34100-3HF1X 10 18 sizes 4-7 with EMC filter & DC choke: ODV2-44150-3HF1N 15 24 ODV2-44200-3HF1N 20 30 ODV2-44250-3HF1N 25 39 ODV2-44300-3HF1N 30 46 ODV2-54040-3HF1N 40 61 ODV2-54050-3HF1N 50 72 ODV2-54060-3HF1N 60 90 ODV2-64075-3HF1N 75 110 ODV2-64120-3HF1N 120 150 ODV2-64150-3HF1N 150 180 ODV2-64175-3HF1N 175 202 ODV2-74200-3HF1N 200 240 ODV2-74250-3HF1N 250 302 size 8 with EMC filter & line choke: ODV2-84300-3HF14 300 370 ODV2-84300-3HF14 350 450 2 2 2 2 3 3 4 4 4 4 5 5 5 6 6 6 6 7 7 8 8 4X 4X 4X 4X 4X 4X 12 12 12 12 12 12 12 12 12 12 12 12 12 1 1
Application functions Dimensions Size Height (ins) Height (mm) Width (ins) Width (mm) Depth (ins) Depth (mm)

Stop Mode Braking Skip Frequency Analog Setpoint Control Digital Setpoint Control

Automation Communications Options I/O Specification Power Supply Programmable Inputs Programmable outputs

Control & Monitoring

PID Fault Memory Data Logging Maintenance Indicator Monitoring

HVAC Functions Pump functions

2 10.1 257 7.4 188 9.4 238

3 12.2 310 8.3 211 10.1 256

4 17.3 440 6.8 173 9.1 230

5 21.3 540 9.3 235 10.6 270

6 34.1 865 13.0 330 13.4 340

7 50.4 1280 13.0 330 14.6 370

8 78.8 2000 20.3 516 19.7 500

Bardac.com

29

OPTIDRIVE E2
General purpose drives with all purpose features Up to 15 HP Basic or NEMA 4X (IP66) Basic or full featured systems drive 3-Phase & single phase motor versions
Basic or loaded, the new E2 is designed to give you the very best in value, performance and ease of use. The innovative design incorporates flexibility, expandability and convenience that will work in many different applications throughout your plant.

AC drives

Expandable Economical Easy Enduring Efficient

KEY FEATURES

speedy Programmable control & Ethernet networking

OPTISTICK Plug-in upload/download configuration memory stick

STANDARD IP20 DRIVES

Model ODE2-11005-1H012 ODE2-11010-1H012 ODE2-21015-1H042 ODE2-12005-1H012 ODE2-12010-1H012 ODE2-12020-1H012 ODE2-22020-1H042 ODE2-22030-1H042 ODE2-12005-3H012 ODE2-12010-3H012 ODE2-12020-3H012 ODE2-22020-3H042 ODE2-22030-3H042 ODE2-32050-1H042 ODE2-32050-3H042 ODE2-14010-3H012 ODE2-14020-3H012 ODE2-24020-3H042 ODE2-24030-3H042 ODE2-24050-3H042 ODE2-34075-3H042 ODE2-34100-3H042 ODE2-34150-3H042 Supply 1, 115V 1, 115V 1, 115V 1, 230V 1, 230V 1, 230V 1, 230V 1, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V Motor 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 1, 230V 3, 230V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V Power 0.5HP 1.0HP 1.5HP 0.5HP 1HP 2HP 2HP 3HP 0.5HP 1HP 2HP 2HP 3HP 5HP 5HP 1HP 2HP 2HP 3HP 5HP 7.5HP 10HP 15HP Amps 2.3 4.3 5.8 2.3 4.3 7 7 10.5 2.3 4.3 7 7 10.5 18 18 2.2 4.1 4.1 5.8 9.5 14 18 24 Size 1 1 2 1 1 1 2 2 1 1 1 2 2 3 3 1 1 2 2 2 3 3 3

OPT-OPORT-US Remote keypad/display

Compact packaging Simple mechanical and electrical installation 50C ambient rating 150% rating for 60 seconds, 175% for 2 seconds Simple 14 parameter basic set up Integral RFI filter option Integral brake transistor, sizes 2 & 3 (100% continuous rated) ModbusRTU serial port

Options: Remote keypad and display OPTISTICK plug in unit for fast up/down load of parameters smarty remote i/o, programmable control & Ethernet networking speedy programmable control & Ethernet networking savvyPanel smart touch screen operator station technology

Models in blue are stocked in limited quantities Please call +410-604-3400 for availability DIMENSIONS & WEIGHT Size Height Width 1 6.8 (173mm) 3.3 (82mm) 2 8.7 (221mm) 4.1 (104mm) 3 10.3 (261mm) 5.2 (131mm) Depth 4.9 (123mm) 5.9 (150mm) 6.9 (175mm) Weight 2.5lbs (1.1kg) 5.9lbs (2.6kg) 9lbs (4.0kg)

30

SPECIFICATION Output Frequency Supply options Frequency Voltage/Phases

Environment

Temperature Altitude Humidity Ingress Protection Control Mode PWM frequency V/Hz ratio Boost Stop modes Skip frequency Setpoint reference Preset speeds PI control Spin start Accel/Decel Configurable i/o Input 1 Input 2 Input 3 Input 4 Output 1 Output 2 Protection Drive trip Motor Trip memory

0 to 500Hz 48 - 62 Hz 100 - 132 volts max, single phase (0.5 - 1.5HP) 180 - 264 volts max, 1-phase (0.5 - 3HP) 180 - 264 volts max, 3-phase (0.5 - 5HP) 342 - 528 volts max, 3-phase (1 - 15HP) Operating, -10 to 50C max, storage, -40 to 60C 0-2000M, derate 1% per 100M above 1000M up to 95%, non condensing Basic IP20, Optional IP55 (NEMA12) Voltage vector 4 to 32KHz (effective) Linear Yes Coast / ramp / DC brake One point, adjustable frequency band 0-10VDC, 4-20mA, 20-4mA, 0-20mA, Keypad, Modbus 8 Direct & analog input trim Starts safely into rotating motor 0 - 600 seconds + Ramp stop decel 0 - 600 seconds Programmable digital input Programmable digital input Configurable analog or digital input Configurable analog or digital input Configurable analog or digital output Normally open relay contact 30VDC 5A, 250VAC 6A Over/under volts, over current, external trip, Overload, over temperature, short circuit, ground fault Last 4 trips stored

drive.web smart automation powerful programmable control functions peer-to-peer over Ethernet smart iPad or touch screen PC operation Internet access

MODEL NUMBERING ODE2-12010-1H012 - 01

Product Series Generation Frame Size 1 - 3 Input Volts: 1=115VAC 2=230VAC 4=460VAC Power Rating Number of phases Power: H= HP K= KW Suffix for single phase motor only IP rating: 2=IP20 N=NEMA12/IP55, unswitched S=NEMA12/IP55, switched Brake Transistor 1= No Brake 4= Brake Filter Type A= EMC filter on 460V drives B= EMC filter on 230V drives 0= No filter

savvyPanel operator station technology runs on iPad, iPhone or touch screen PC

INDUSTRIAL NEMA 12 / IP55 DRIVES For harsh & dirty environments

# = S Switched with keypad, display, speed pot, fwd/rev switch & power isolator switch # = N Unswitched with keypad & display
Model ODE2-11005-1H01# ODE2-11010-1H01# ODE2-21015-1H04# ODE2-12005-1H01# ODE2-12010-1H01# ODE2-12020-1H01# ODE2-22020-1H04# ODE2-22030-1H04# ODE2-32050-1H04# ODE2-32050-3H04# ODE2-14010-3H01# ODE2-14020-3H01# ODE2-24020-3H04# ODE2-24030-3H04# ODE2-24050-3H04# ODE2-34075-3H04# ODE2-34100-3H04# Supply 1, 115V 1, 115V 1, 115V 1, 230V 1, 230V 1, 230V 1, 230V 1, 230V 1, 230V 3, 230V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V Motor 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 230V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V 3, 460V Power 0.5HP 1.0HP 1.5HP 0.5HP 1HP 2HP 2HP 3HP 5HP 5HP 1HP 2HP 2HP 3HP 5HP 7.5HP 10HP Amps 2.3 4.3 5.8 2.3 4.3 7 7 10.5 18 18 2.2 4.1 4.1 5.8 9.5 14 18 Weight 5.4lbs (2.4kg) 10.3lbs (4.6kg) 16.6lbs (7.4kg) Size 1 1 2 1 1 1 2 2 3 3 1 1 2 2 2 3 3

Tough drives for rough jobs

DIMENSIONS & WEIGHT Size Height Width 1 7.9 (200mm) 5.5 (140mm) 2 12.2 (310mm) 6.5 (164mm) 3 12.2 (310mm) 8.3 (211mm)

Depth 6.4 (162mm) 6.9 (176mm) 9.6 (243mm)

Bardac.com

31

AC drives

NEMA 4X (IP66) Enclosed Drives

OPTIDRIVE E2 For harsh, wet & dirty environments
Switched version with keypad, display, speed pot, forward/off/reverse switch & power isolator switch. Unswitched version with keypad & display. Key Features
40C ambient temperature Conduit cable entry Padlockable power switch ModbusRTU port ABS moldings & corrosion resistant heat sink All standard drive features included Brake standard on sizes 2 & 3 Optional internal Ethernet size 2 & 3

Embed a speedy in the drive to provide Ethernet networking & programmable control

NEMA 4X (indoor) - ODE2 SERIES VFD i66

115V, SINGLE PHASE IN, 230V, 3-PHASE MOTOR
SIZE 1 1 2 HP 0.5 1.0 1.5 AMPS 2.3 4.3 5.8 UNSWITCHED ODE2-11005-1H01X ODE2-11010-1H01X ODE2-21015-1H04X SWITCHED ODE2-11005-1H01Y ODE2-11010-1H01Y ODE2-21015-1H04Y

230V, SINGLE PHASE IN, 230V, 3-PHASE MOTOR

1 1 1 2 2 3 0.5 1 2 2 3 5 2.3 4.3 7 7 10.5 18 ODE2-12005-1H01X ODE2-12010-1H01X ODE2-12020-1H01X ODE2-22020-1H04X ODE2-22030-1H04X ODE2-32050-1H04X

ODE2-12005-1H01Y ODE2-12010-1H01Y ODE2-12020-1H01Y ODE2-22020-1H04Y ODE2-22030-1H04Y ODE2-32050-3H04Y

230V, 3-PHASE IN, 230V, 3-PHASE MOTOR

3 5 18 ODE2-32050-3H04X

ODE2-32050-3H04Y

380/460V, 3-PHASE IN, 380/460V, 3-PHASE MOTOR

1 1 2 2 2 3 3 1 2 2 3 5 7.5 10 2.2 4.1 4.1 5.8 9.5 14 18 ODE2-14010-3H01X ODE2-14020-3H01X ODE2-24020-3H04X ODE2-24030-3H04X ODE2-24050-3H04X ODE2-34075-3H04X ODE2-34100-3H04X

ODE2-14010-3H01Y ODE2-14020-3H01Y ODE2-24020-3H04Y ODE2-24030-3H04Y ODE2-24050-3H04Y ODE2-34075-3H04Y ODE2-34100-3H04Y

ODE2 Models - NEMA 4X (i66) For extra tough, washdown duty

DIMENSIONS & WEIGHT
Size Height 1 9.1 (232mm) 2 10.1 (257mm) 3 12.2 (310mm) Width 6.4 (161mm) 7.4 (188mm) 8.3 (211mm) Depth 6.9 (175mm) 7.4 (187mm) 9.6 (243mm) Weight 6.2lbs (2.8kg) 10.1lbs (4.6kg) 16.3lbs (7.4kg)

# X = Unswitched, Y = Switched

32

AC Drive Options
ITEM Remote Keypads OD-OPRTP-US OPT2-OPORT-IN DESCRIPTION Remote keypad Remote Keypad MODEL P P2 V2 E2 P P P P

drive.web smart drives

P P P P P P P P P P P P

Communications Options speedy dw21X-04 ModbusTCP/IP Interface Module speedy dw21X-25 EIP/PCCC Interface Module OPT2-DEVNT-IN DeviceNet Interface Module OPT2-PROFB-IN Profibus DP Interface Module Programming Interface Options speedy dw21X USB Interface Module OPT-STICK-IN Optistick parameter copying stick with IR interface OPT2-STICK-IN Optistick parameter copying stick with Bluetooth Encoder Feedback Options ODP-ENCOD-US Encoder feedback unit, DIN rail mounting OPTION-RTX Encoder pulse buffered retransmit OPT2-ENCOD-IN Encoder feedback module for P2 EMC Filters OD-F1121-US OD-F2121-US OD-F1341-US OD-F2341-US OD-F3341-US Optifilter, drive size 1, 230V, 1-phase Optifilter, drive size 2, 230V, 1-phase Optifilter, drive size 1, 230/480V, 3-phase Optifilter, drive size 2, 230/480V, 3-phase Optifilter, drive size 3, 230/480V, 3-phase

INTERNET
P P P P P P P P

P P P

P P P P P P P P P P P P P P P P P P

Brake Resistors (Case Type) OD-BR100-IN DB Resistor, drive size 2, 100, 200W OD-BR050-IN-i55 DB Resistor, drive size 2, IP55 50, 200W OD-BRES4-IN DB Resistor, drive size 4, 33, 500W Brake Resistors (Enclosed, ventilated with over temp switch) Intermittent duty 10%, 10 sec CX503069 1 - 3 HP 230VAC, 63, 12x5x5 CX503070 5 HP 230VAC, 38, 12x5x5 CX503072 7.5 - 10 HP 230VAC, 19, 12x7x5 CX503073 15 HP 230VAC, 12.6, 12x10x5 CX503074 20 HP 230VAC, 9.6, 12x13x5 CX503075 25 HP 230VAC, 7.5, 12x16x5 CX503076 30 HP 230VAC, 6.3, 19x10x5 CX503077 40 HP 230VAC, 4.9, 19x10x5 CX503078 50 HP 230VAC, 3.9, 19x10x5 CX503079 30 HP 230VAC, 3.3, 19x13x5 CX503082 CX503085 CX503086 CX503087 CX503088 CX503089 CX503090 CX503091 CX503092 CX503093 CX503094 CX503096 Input Line Reactors OD-IL121-US OD-IL221-US OD-IL143-US OD-IL243-US OD-IL343-US Output Filters OD-OUTF1-US OD-OUTF2-US OD-OUTF3-US OD-OUTF4-US OD-OUTF5-US OD-OUTF6-US DIN Rail Mounts OD-DINPL-01 OD-DINPL-02 1 - 3 HP 460VAC, 250, 12x5x5 5 - 10 HP 460VAC, 75, 12x7x5 15 HP 460VAC, 50, 12x10x5 20 HP 460VAC, 38, 12x13x5 25 HP 460VAC, 30, 12x16x5 30 HP 460VAC, 25, 19x10x5 40 HP 460VAC, 19, 19x13x5 50 HP 460VAC, 15, 19x13x5 60 HP 460VAC, 12.6, 19x13x5 75 HP 460VAC, 10, 26.5x10x5 100 HP 460VAC, 7.5, 26.5x16x5 125 - 150 HP 460VAC, 6, 28x10x10 Input inductor, drive size 1, 220/240V, 1-ph, 10A Input inductor, drive size 2, 220/240V, 1-ph, 25A Input inductor, drive size 1, 380/480V, 3-ph, 6A Input inductor, drive size 2, 380/480V, 3-ph, 10A Input inductor, drive size 3, 380/480V, 3-ph, 36A Output sine filter, drive size 1, 480V, 10A Output sine filter, drive size 2, 480V, 12A Output sine filter, drive size 3, 480V, 30A Output sine filter, drive size 4, 480V, 75A Output sine filter, drive size 5, 480V, 180A Output sine filter, drive size 6, 480V, 250A DIN rail mount kit for drive size 1 DIN rail mount kit for drive size 2

P P P P P

P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P

Add a drive.web module to any drive for unlimited automation capability: Powerful programmable control functions Peer-to-peer networking over Ethernet Smart iPad or touch screen PC operation Internet access
ITEM DESCRIPTION Smart Programmable Control + Peer-to-Peer Networking + Extra i/o dw212 drive.web smarty interface for E2 models w/16 extra i/o dw213 drive.web smarty interface for ODP models w/16 extra i/o dw214 drive.web smarty interface for P2 models w/16 extra i/o dw216 drive.web smarty interface for V2 models w/16 extra i/o -04 OPTION ModbusTCP/IP -05 OPTION Function Block Library 1, Process Control -06 OPTION Function Block Library 2, Winder Control -10 OPTION Function Block Library 3, Advanced Math -15 OPTION Encoder input For additional options see page14 MODEL P P2 V2 E2 P P P P P P P P P P P P P P P P P P P P P P P

P P P P P P P P P P P P P P P P P P

Smart Programmable Control + Peer-to-Peer Networking dw22X drive.web speedy interface modules P P P P With Ethernet ModbusTCP/IP & basic function blocks - see page 14 -05 OPTION Function Block Library 1, Process Control P P P P -06 OPTION Function Block Library 2, Winder Control P P -10 OPTION Function Block Library 3, Advanced Math P P P P

P P P P P P P P P P P P P P P P P P P

Drill down to the details Drag & drop to connect

P P

Data Cables & Splitters OD-48503-US RS485 data cable, 0.3M, (RJ11 - RJ11) OD-48510-US RS485 data cable, 1M, (RJ11 - RJ11) OD-48530-US RS485 data cable, 3M, (RJ11 - RJ11) OPT-J4505-IN RS485 data cable, 0.5M, (RJ45 - RJ45) OPT-J4510-IN RS485 data cable, 1M, (RJ45 - RJ45) OPT-J4530-IN RS485 data cable, 3M, (RJ45 - RJ45) OD-485SP-US RS485 data cable 3-way splitter (RJ11) OPT-J45SP-IN RS485 data cable 3-way splitter (RJ45) i/o Boards OPT-LOGIP-11 OPT-LOGIP-23 ODP-3ROUT-US 110VAC logic input isolator 230VAC logic input isolator 3-Relay output board

P P P P P P P P P P P P P P P P

drive.web automation Intuitive Easy Reliable Very smart!

P P P P P P

Bardac.com

33

AC drives

OPTIDRIVE E2 SP

Single Phase Motor Controller

The innovative E2 SP, Single Phase motor controller, uses a unique control algorithm that ensures reliable starting and control. These drives are designed only for use on Shaded Pole (SP) or Permanent Split Capacitor (PSC) type motors in variable torque, direct drive fan and centrifugal pump applications. They use high frequency switching to provide near silent running which is most desirable in applications such as: Commercial and residential HVAC Fume extraction Laboratories Quiet locations. Like the other E2 products it is expandable, versatile and economical in all its forms:

For Shaded Pole (SP) & Permanent Split Capacitor (PSC) motors used in variable torque, fan and pump type applications only

Basic or NEMA12 versions Basic or full featured systems drive Basic or peer-to-peer networking over Ethernet
SPECIFICATION Output Frequency Supply options Frequency Volts/Phases Environment Temperature Altitude Humidity Ingress Control Mode PWM Hz V/Hz ratio Boost Stop modes Setpoint ref Presets PI control Accel/Decel Configurable i/o Input 1 Input/output 2 Input 3 Input 4 Output 1 Relay 1 Protection Drive trip Motor Trip memory 0 to 500Hz 48 - 62 Hz 100 - 132 volts max, single phase (0.5 - 1.0HP) 180 - 264 volts max, 1-phase (0.5 - 1.5HP) 180 - 264 volts max, 3-phase (0.5 - 1.5HP, special order) Operating, -10 to 50C max, storage, -40 to 60C 0-2000M, derate 1% per 100M above 1000M up to 95%, non condensing Basic IP20, Optional IP55 (NEMA12) V/F 4 to 32KHz (effective) Linear Automatic boost phase operation Coast / ramp / DC brake 0-10VDC, 4-20mA, 0-20mA, Keypad, Modbus 8 preset speeds Direct & analog input trim 0 - 600 secs + Ramp stop decel 0 - 600 secs Programmable digital input Selectable digital input / output Configurable analog or digital input Configurable analog or digital input Configurable analog or digital output Normally open relay contact 30VDC 5A, 250VAC 6A Over/under volts, over current, external trip, Overload, over temp, short circuit, ground fault Last 4 trips stored

THE BASICS Compact packaging Simple mechanical and electrical installation 50C ambient rating 150% rating for 60 seconds, 175% for 2 seconds Simple basic set up Integral brake transistor (size 2, 100% rated) ModbusRTU serial port Remote keypad and display option OPTISTICK plug-in for easy parameter up/down load

34

E2 Single Phase IP20

Single phase motor controller for use only with Shaded Pole (SP) or Permanent Split Capacitor (PSC) type motors on variable torque, direct drive fans and centrifugal pumps

STANDARD E2 SP IP20 DRIVES

Model Supply Motor
1, 115V 1, 115V 1, 230V 1, 230V 1, 230V

Power
0.5HP 0.75HP 0.5HP 1HP 1.5HP

Amps
7.0 10.5 4.3 7.0 10.5

Size
1 2 1 1 2

ODE2-11005-1H012-01 1, 115V ODE2-21007-1H042-01 1, 115V ODE2-12005-1H012-01 1, 230V ODE2-12010-1H012-01 1, 230V ODE2-22015-1H042-01 1, 230V

DIMENSIONS & WEIGHT Size Height Width Depth Weight 1 6.8 (173mm) 3.3 (82mm) 4.9 (123mm) 2.5lbs (1.1kg) 2 8.7 (221mm) 4.1 (104mm) 5.9 (150mm) 5.9lbs (2.6kg)

E2 SP NEMA 12 / IP55

Single phase motor controller for use only with Shaded Pole (SP) or Permanent Split Capacitor (PSC) type motors in variable torque, fan and centrifugal pump applications

Switched version with keypad, display, speed pot, forward/off switch & power isolator switch Unswitched version with keypad & display
40C ambient temperature Conduit cable entry Padlockable power switch Wash down duty ModbusRTU port

For harsh & dirty environments

Compact packaging All standard drive features included Brake standard on 230V, size 2 Optional internal Ethernet Optional internal drive.web

NEMA 12 / IP55 DRIVES

Model Supply Motor
1, 115V 1, 115V 1, 230V 1, 230V 1, 230V

Power
0.5HP 0.75HP 0.5HP 1HP 1.5HP

Amps
7.0 10.5 4.3 7.0 10.5

Size
1 2 1 1 2

ODE2-11005-1H01#-01 1, 115V ODE2-21007-1H04#-01 1, 115V ODE2-12005-1H01#-01 1, 230V ODE2-12010-1H01#-01 1, 230V ODE2-22015-1H04#-01 1, 230V

# N = Unswitched, S = Switched DIMENSIONS & WEIGHT Size Height Width Depth Weight 1 7.9 (200mm) 5.5 (140mm) 6.4 (162mm) 5.4lbs (2.4kg) 2 12.2 (310mm) 6.5 (164mm) 6.9 (176mm) 10.3lbs (4.6kg)

Bardac.com

35

DC technology

K-Series single phase DC drives - up to 2HP

Regenerative & Non-regenerative
Enclosed, DIN rail mounting drives in elegant compact packages for both stand alone and systems applications. Standard features include: Plug-in screw terminals Dual 115 & 230 volts, 50/60Hz supply Armature volts or tach feedback IP20 enclosure Output for ramps, speed demand, current demand Inputs for ramped speed, unramped speed, torque (current) Logic outputs for overload & trip Configurable level comparator & sign changer Standards: UL, C-UL, CE

MODEL RATING
NON-ISOLATED K340 Armature current 3.4 amps 1/4Hp 0.25kW @90Vdc 1/2Hp 0.55kW @180Vdc Size 1.4W x 4.2H x 4.7D K680 Armature current 6.8 amps 1/2Hp 0.55kW @90Vdc 1Hp 0.75kW @180Vdc Size 1.8W x 4.2H x 4.7D Armature current 12.2 amps 1Hp 0.75kW @90Vdc 2Hp 1.8kW @180Vdc Size 1.8W x 4.2H x 4.7D

FEATURES

TERMINALS

K1220

Max Speed +10V Min Speed Min Up Ramp Input + IR Comp Common I max Run AVF/Tach switch Tach f/b Speed range switch AC voltage selector Field 1Amp 0.9x ac supply

ISOLATED K340i Armature current 3.4 amps 1/4Hp 0.25kW @90Vdc 1/2Hp 0.55kW @180Vdc Size 2.4W x 4.2H x 4.7D K680i

K1220i

Max Speed Min Speed Up Ramp Down Ramp Armature current 6.8 amps Stability 1/2Hp 0.55kW @90Vdc I max 1Hp 0.75kW @180Vdc IR Comp Size 2.8W x 4.2H x 4.7D AVF/Tach switch Speed range switch Armature current 12.2 amps AC voltage selector 1Hp 0.75kW @90Vdc Level comparator 2Hp 1.8kW @180Vdc Size 2.8W x 4.2H x 4.7D

+10V ref Min speed Input + Output +/Common Input +/Pushbutton + Pushbutton Run Common Tach f/b

LevelO/P Level iI/P Overload Trip Ramp O/P Demand O/P Speed O/P Current O/P + Speed I/P Torque I/P

Optional drive.web smarty For complete process automation Model dw210-1107 uses discrete i/o interface to provide: Ethernet networking Internet access Powerful function blockprogramming ModbusRTU and ModbusTCP/IP Additional remote i/o Encoder feedback (see page 20 for details)

4-QUADRANT, REGENERATIVE, REVERSING, ISOLATED K340XRi Armature current 3.4 amps 1/4Hp 0.25kW @90Vdc Max Speed 1/2Hp 0.55kW @180Vdc Min Speed Size 2.4W x 4.2H x 4.7D Up Ramp Down Ramp K680XRi Armature current 6.8 amps Stability 1/2Hp 0.55kW @90Vdc I max 1Hp 0.75kW @180Vdc IR Comp Size 2.8W x 4.2H x 4.7D AVF/Tach switch Speed range switch K1220XRi Armature current 12.2 amps AC voltage selector 1Hp 0.75kW @90Vdc Level comparator 2Hp 1.8kW @180Vdc Size 2.8W x 4.2H x 4.7D

+10V ref Min speed Input + Output +/Common Input +/Pushbutton + Pushbutton Run Common Tach f/b

LevelO/P Level iI/P Overload Trip Ramp O/P Demand O/P Speed O/P Current O/P + Speed I/P Torque I/P

High Speed Fuse Kits - DIN Rail Mounting FLN-6.3 Line fuse kit K340 FLL-6.3 Line/line fuse kit K340 FLNR-6.3 Line & arm fuse kit K340XRi FLLR-6.3 Line/line & arm fuse kit K340XRi FLN-20 Line fuse kit all non-regen K FLL-20 Line/line fuse kit all non-regen K FLNR-20 Line & arm fuse kit all regen K FLLR-20 Line/line & arm fuse kit all regen K

36

Single Phase DC Systems Drives

NON-REGEN MODELS
400i (4 amps) 1600i (16 amps) 3200i/32 (32 amps) 3200i/48LL (48 amps) 3200i/32C109 (32 amps) 230VAC, 180VDC 0.75hp 3hp 6hp 415VAC, 320VDC 7.5hp 460VAC, 360VDC 8hp 115VAC, 90VDC 0.4hp 1.5hp 3hp 240VAC, 180VDC 4hp 230VAC, 180VDC 5hp

This family of single phase DC drives with isolated control circuitry, is designed to meet the most exacting requirements of high performance systems builders. It is a range of full featured products using advanced manufacturing technologies to give unequaled value and functionality to OEMs and System Integrators with world wide markets and demanding applications. FUSE KIT
included F2-30 F2-60 F2-80 F2-60

Model 400i, up to 0.75hp 4 x 6.25 x 2 (100 x 160 x 50mm)

4-Q REGEN, REVERSING MODELS

3600XRi/16 3600XRi/32 3600XRi/36 3600XRi/36LL 3600XRi/32C132 230VAC, 180VDC 3hp 6hp 6.5hp 415VAC, 320VDC 10hp 480VAC, 360VDC 10hp 115VAC, 90VDC 1.5hp 3hp 3hp 240VAC, 180VDC 6hp 240VAC, 180VDC 6hp

FUSE KIT
F3-30 F3-60 F3-60 F3-60 F3-60

Model 1600i, up to 3hp 6.1 x 6.1 x 3.4 (150 x 150 x 85 mm)

Standard Features

Approvals: CE Linear torque control Armature voltage or tach feedback Calibration range switches Speed reference 0-10V or 4-20mA Maximum and minimum speed settings Adjustable current limit Current range switch selectable (not on 400i) Independently adjustable up and down ramps 150% overload capacity, 30 second stall timer Stall relay contact output (transistor on 400i) Zero speed relay contact (transistor on 400i) Control fuses fitted (Power fuse on 400i) Start inhibit after power loss Power on and stall indicator LEDs Speed signal output Current signal output Ramp signal output Total demand signal output Dual supply voltage 110 / 230 VAC, 50/60Hz Suitable for shunt or PM motors IR compensation Stability adjustment

Optional drive.web smarty

For complete process automation Model dw210-1107 uses discrete i/o interface to the drive and to provide: Ethernet networking Internet access Powerful function blockprogramming ModbusRTU and ModbusTCP/IP Additional remote i/o Encoder feedback (see page 15 for details)

Model 3200i, up to 7.5hp 6.1 x 8.0 x 4.2 (150 x 200 x 105 mm)

Additional Regen Drive Features

Speed reference +/-10V or 4-20mA Speed trim input Independent up & down ramps in FWD & REV Separate adjustable current limits motor/brake Torque control in either 2 or 4 quadrants Relay for Stall, Zero speed, Reverse, Overload Control fuses fitted Fast, ramped or coast stop LEDs for + current, - current, stall & stall timer Momentary contact for reversing applications

Enclosed Drives

Enclosed wall mounting versions of these drives and a wide range of other options are detailed in the Modulus Drive Units section of this catalog Model 3600XRi Up to 32 amps - 6.9x 8x 3.2 (175x200x80 mm) 36 amps unit - 6.9x 8x 3.8 (175x200x95 mm)

Bardac.com

37

DC technology
Single Phase DC Drives for OEMs
Model 370 ... OEM Chassis Drives
Basic Specification: Compact, DC drives designed for low cost, non-regenerative, non-isolated machine controls.
Rating: 1/4hp at 90VDC, 1/2hp at 180VDC Maximum and minimum speed settings Current limit Acceleration pot Suitable 110 or 230 volts, single phase, 50 or 60Hz (not isolated) For use with permanent magnet or shunt field motors Approval: CE Dimensions 4 x 4 x 1.6 (100 x 100 x 40mm)

Models 400, 800, 1200 ... OEM DC Drives (up to 2hp)

Versatile, basic, low cost drives suitable for wide range of machine control applications
Model
400 800 1200 400E 800E 1200E

Amps
4 amps 8 amps 12 amps 4 amps 8 amps 12 amps

Description
Open chassis with screw terminals Open chassis with screw terminals Open chassis with screw terminals Enclosed NEMA 1 with pot, switch, fuse Enclosed NEMA 1 with pot, switch, fuse Enclosed NEMA 1 with pot, switch, fuse Enclosed, pot, switch, brake, reverse, fuse Enclosed, pot, switch, brake, reverse, fuse Enclosed, pot, switch, brake, reverse, fuse

@ 180VDC
0.75hp 1.5hp 2.0hp 0.75hp 1.5hp 2.0hp 0.75hp 1.5hp 2.0hp

@ 90VDC Dimensions
0.38hp 0.75hp 1.0hp 0.38hp 0.75hp 1.0hp 0.38hp 0.75hp 1.0hp 5.2x4.0x1.6 (130x100x40mm) 5.2x4.0x2.8 (130x100x70mm) 5.2x4.0x2.8 (130x100x70mm) 9.9x7.0x3.8 (250x177x95 mm 9.9x7.0x3.8 (250x177x95 mm 9.9x7.0x3.8 (250x177x95 mm 9.9x7.0x3.8 (250x177x95 mm) 9.9x7.0x3.8 (250x177x95 mm) 9.9x7.0x3.8 (250x177x95 mm)

400ERB 4 amps 800ERB 8 amps 1200ERB 12 amps

Standard features:

Linear torque control Armature voltage or tach feedback with IR compensation Calibration range switches (no component changes) Speed reference 0-10V or 4-20mA Maximum and minimum speed settings Adjustable current limit Independently adjustable up and down ramps 150% overload capacity with 30 second stall timer Stall and Zero Speed relay driver outputs Power fuse (up to 12 amps) Power on and stall indicator LEDs Stability adjustment Speed, Ramp Speed and Current signal outputs International supply voltages 110 / 230 VAC, 50/60hz (not isolated) Suitable for shunt wound or permanent magnet motors
Approvals: CE

Model 1200E

38

Linear Amplifier DC Servo Drives

Model 200XLV 4-Quadrant DC Drive
These products are designed for small, high performance position and speed control applications such as robotics, mechanical handling, automated assembly, packaging processes, machine tool axis, etc. The units are miniature, fast response, reversing, linear transistor drives for brushed DC motors with armatures up to 48 volts. They operate from either a smoothed, unregulated, rectified DC, or battery supply, and include built in thermal protection, current limit with short term overcurrent capacity and resettable overload trip. The control circuits are designed to ensure extremely low noise emissions, and will meet the most stringent of EMC (ElectroMagnetic Compliance) requirements.

Each unit incorporates facilities for implementing optional control modes with either P or P+I or PID (Proportional, Integral, Derivative) to enable optimum high performance in a wide variety of applications. Optional configurations: 1. Speed control, armature voltage feedback with IR compensation. 2. Speed control, tach feedback. 3. Position control, position feedback. 4. Torque control with armature current feedback.

Standard Features

Speed, Position, or Torque control modes Extremely low RF noise emissions Ready indicator light Motor voltage range: +/-6 VDC to +/-48 VDC Armature current up to 2A cont., 3A peak Supply voltage 12 to 48 VDC Precision 5v and 10v references (short circuit protected, 5mA) Differential setpoint inputs (300K ohms) Overload trip Thermal protection Adjustable Maximum Speed Adjustable IR Compensation for armature volts feedback Plug-on terminals DIN rail mounting clip (optional)

Dimensions

3.25 x 1.65 x 1.65 (82x40x40mm)

Approvals: CE

Bardac.com

39

DC technology

PL Series ...digital dc drives

PL265 Up to 400 HP PL/X980 Up to 1940 HP

up to 2000+ hp

PL/X145 Up to 200 HP

PL/X50 Up to 75 HP

Standard Features

Total digital control Basic peer-to-peer link 40 character backlit display Friendly, easy menu structure Modern, compact packaging Extensive, flexible, plug-in i/o RS232 serial port Easy configuration saving & cloning Built-in automatic field controller Built in programmable control functions for PID, winders, orientation, etc. Tach, encoder & arm volts feedback Easy reliable autotune UL, C-UL, CE

PL/X440 Up to 900 HP

Optional:

Peer-to-peer Ethernet communications drive.web programmable control ModbusTCP & EIP over Ethernet ModbusRTU RS485 serial port Devicenet Profibus DP

powerDRIVE Packages

PL/X DC drives up to 400 horsepower are available in compact powerDRIVE packages complete with: Main contactor High speed 3-phase line fuses High speed armature fuse High speed control/field fuses Line filter (100HP & up) Optional motor blower starter (100HP & up)

40

Key Features
Analog Inputs & Outputs 8 analog inputs & 4 analog outputs (12 bits) All outputs short circuit protected All inputs over voltage protected up to +50v Inputs configurable 5 to 30v Input volts programmable up to +/-30v Digital Inputs & Outputs 17 digital inputs & 7 digital outputs Digital i/o short circuit protected Digital inputs over volts protected to +50v (with settable switching levels) Digital outputs over volts protected to +50v Speed Feedback - Standard Analog tach Encoder Armature voltage Encoder + armature volts Encoder + analog tach Field Configurations Fixed Current Fixed voltage Automatic field weakening Delayed field quench Standby field setting Field economy Diagnostic Monitoring Scope terminal monitors selectable values All analog input voltages All digital input states All analog output voltages All digital output states Tach volts Motor arm volts & amps Field current Output power Kw AC supply volts User Configurable Software Functions Two PID blocks, Parameter profiler, Winder reel diameter calculator, Winder taper tension calculator, Winder torque/inertia/ friction compensator, Preset speed function, Two summers, Software motorized pot, Interval timer, Current profiling, Zero speed with shaft position lock, Jog / crawl functions, Two filters, Dual motor swap, Latch, Sample & hold function, Auto self-tune current loop, Linear and S-ramps, Slack take-up, Batch Counter, Draw control. Engineered Configuration Packages Using the drive.web speedy dw111 controller, pre-configured generic apps are available for Open & Closed Loop Winders, Position Controls, Coordinated Line Drives, Indexing and others. Protection Interline device networks High energy MOVs Instantaneous overcurrent Overcurrent ( inverse time) Field fail and overcurrent Motor over temperature SCR (thyristor) over temp Main power phase loss Armature over volts Over speed protection Speed feedback mismatch Stall protection Standstill logic SCR (Thyristor) trigger failure Digital output short circuit RS232 Serial Communications Port Parameter upload/download to save and print Drive - to - drive parameter link & set up cloning Optional Communications drive.web peer-to-peer Ethernet: drive.web, ModbusTCP/IP, EIP ModbusRTU Profibus DP

Easily add a savvyPanel touch screen HMI with secure WiFi interface
Simple, intuitive configuration techniques with clear display of information No pots or switches to set Accurate display of voltages and currents Positive displacement pushbuttons for tactile feel High power processor and large memory will ensure ease of product enhancement in the future 2-button reset gets users back to OEM set up Powerful savvy graphical configuration, diagnostics & system design tools
Bright, 40 character display with clear parameter descriptions exit menu level scroll down

scroll up enter menu level

Reliable, easy plug-in control terminals

The powerful savvy configuration tools are used for the PL Series DC drives, AC drives, drive.web programmable controllers, savvyPanel operator stations & complete systems.

Bardac.com

41

DC technology

h 75 HP, PLX50/123 powerPLX50/123 g

With fuses, contactor & power components (shown hinged open for easy access)

h 400 HP, PL265/630 powerPL265/630 g

With fuses, contactor & power components (shown with optional motor blower starter)

Models & Ratings

4-Quadrant, Regenerative Drives
hp @ hp @ Armature Field 500V arm 240V arm Amps DC Amps DC 460VAC 230VAC @ 40C power(basic) 20 30 60 75 100 125 150 200 250 300 10 10 25 35 50 60 75 100 125 150 36 51 99 123 164 205 270 330 405 480 5(8) 5(8) 5(8) 5(8) 10(16) 10(16) 10(16) 10(16) 32 32 powerDRIVE Model Dimensions W x H x D (weight) inches (LBS) 8.5 x 11.4 x 11.7 (26) 8.5 x 11.4 x 11.7 (26) 8.5 x 11.4 x 11.7 (30) 8.5 x 11.4 x 11.7 (30) 16 x 33 x 9.7 (80) 16 x 33 x 9.7 (80) 16 x 33 x 9.7 (82) 16 x 33 x 9.7 (89) basicDRIVE Model PLX15/36 PLX20/51 PLX40/99 PLX50/123 PLX65/164 PLX85/205 PLX115/270 PLX145/330 Dimensions W x H x D (weight) inches (LBS) 8.5 x 11.4 x 6.9 (16) 8.5 x 11.4 x 6.9 (16) 8.5 x 11.4 x 6.9 (17) 8.5 x 11.4 x 6.9 (17) 8.5 x 16.2 x 8.6 (27) 8.5 x 16.2 x 8.6 (27) 8.5 x 16.2 x 8.6 (28) 8.5 x 16.2 x 8.6 (28) Line Reactor Model LM37 LM52 LM120 LM120 LM150 LM195 LM240 LM300 LM375 LM480

powerPLX15/36 powerPLX20/51 powerPLX40/99 powerPLX50/123 powerPLX65/164 powerPLX85/205 powerPLX115/270 powerPLX145/330

powerPLX185/405 16 x 43.5 x 13.7 (143) powerPLX225/480 16 x 43.5 x 13.7 (145)

PLX185/430 8.5 x 19.9 x 11.6 (43) PLX225/530 8.5 x 19.9 x 11.6 (45)

2-Quadrant, Non-Reversing Drives

hp @ hp @ Armature Field 500V arm 240V arm Amps DC Amps DC 460VAC 230VAC @ 40C power(basic) 20 30 60 75 100 125 150 200 250 300 400 10 10 25 35 50 60 75 100 125 150 200 36 51 99 123 164 205 270 330 405 480 630 5(8) 5(8) 5(8) 5(8) 10(16) 10(16) 10(16) 10(16) 32 32 32

powerDRIVE Model

Dimensions W x H x D (weight) inches (LBS) 8.5 x 11.4 x 11.7 (26) 8.5 x 11.4 x 11.7 (26) 8.5 x 11.4 x 11.7 (30) 8.5 x 11.4 x 11.7 (30) 16 x 33 x 9.7 (80) 16 x 33 x 9.7 (80) 16 x 33 x 9.7 (82) 16 x 33 x 9.7 (89) 16 x 43.5 x 13.7 (143) 16 x 43.5 x 13.7 (143) 16 x 43.5 x 13.7 (154)

basicDRIVE Model PL15/36 PL20/51 PL40/99 PL50/123 PL65/164 PL85/205 PL115/270 PL145/330 PL185/430 PL225/530 PL265/630

Dimensions W x H x D (weight) inches (LBS) 8.5 x 11.4 x 6.9 (16) 8.5 x 11.4 x 6.9 (16) 8.5 x 11.4 x 6.9 (17) 8.5 x 11.4 x 6.9 (17) 8.5 x 16.2 x 8.6 (27) 8.5 x 16.2 x 8.6 (27) 8.5 x 16.2 x 8.6 (28) 8.5 x 16.2 x 8.6 (28) 8.5 x 19.9 x 11.6 (43) 8.5 x 19.9 x 11.6 (45) 8.5 x 19.9 x 11.6 (45)

Line Reactor Model LM37 LM52 LM120 LM120 LM150 LM195 LM240 LM300 LM375 LM480 LM600

powerPL15/36 powerPL20/51 powerPL40/99 powerPL50/123 powerPL65/164 powerPL85/205 powerPL115/270 powerPL145/330 powerPL185/405 powerPL225/480 powerPL265/630

basicDRIVES must be installed with new contactor and the correct high speed SCR fuses to maintain the warranty drive.web options see pages 84 - 89 Computer RS232 Communications Cable - Drive to DB9 - part number LA102595, included with every drive For details of Drive Isolation Transformers, Line Reactors and Line Filters, please see pages 78 - 79

42

PL-Series Drives to 2000HP

DC drives 400 HP to 2000 HP are normally available as basicDRIVES but can be supplied with powerKITS including: high speed fuses for line, armature & field main DC contactor. Line filter Flexible bus bar kits (basicDRIVES must be installed with new power components to maintain the warranty) Drives are available for either 6-pulse or 12-pulse, 460 VAC or 690 VAC configurations please call for further information.

Models & Ratings

DC Drives - 500 VDC Armature
HP @ 500VDC 460VAC 400 450 500 575 650 750 895 1000 1140 1260 1380 ARMATURE AMPS DC @ 40C 650 750 850 950 1050 1250 1450 1650 1850 2050 2250 FIELD AMPS DC 32 (50) 32 (50) 32 (50) 32 (50) 32 (50) 64 64 64 64 64 64 basicDRIVE 4-QUAD REGEN REVERSING PLX275/650 PLX315/750 PLX360/850 PLX400/950 PLX440/1050 PLX520/1250 PLX600/1450 PLX700/1650 PLX800/1850 PLX900/2050 PLX980/2250 basicDRIVE NON-REVERSING PL275/650 PL315/750 PL360/850 PL400/950 PL440/1050 PL520/1250 PL600/1450 PL700/1650 PL800/1850 PL900/2050 PL980/2250 DIMENSIONS W x H x D (weight) INCHES (LBS) TOP CABLE ENTRY 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) drive.web smart control OVERLOAD RATING 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 100%, CONT 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 100%, CONT

DC Drives - 700 VDC Armature

HP @ 700VDC 690VAC 550 650 735 820 900 1080 1250 1420 1600 1770 1940 ARMATURE AMPS DC @ 40 C 650 750 850 950 1050 1250 1450 1650 1850 2050 2250 FIELD AMPS DC 32 (50) 32 (50) 32 (50) 32 (50) 32 (50) 64 64 64 64 64 64 basicDRIVE 4-QUAD REGEN REVERSING PLX275HV/650 PLX315HV/750 PLX360HV/850 PLX400HV/950 PLX440/1050 PLX520HV/1250 PLX600HV/1450 PLX700HV/1650 PLX800HV/1850 PLX900HV/2050 PLX980HV/2250 basicDRIVE NON-REVERSING PL275/650 PL315/750 PL360/850 PL400/950 PL440/1050 PL520HV/1250 PL600HV/1450 PL700HV/1650 PL800HV/1850 PL900HV/2050 PL980HV/2250 DIMENSIONS W x H x D (weight) INCHES (LBS) TOP CABLE ENTRY 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 10 x 30 x 13.8 (120) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) 20 x 30 x 13.8 (285) OVERLOAD RATING 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 100%, CONT 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 150%, 25 SECS 100%, CONT

Bardac.com

43

DC technology
PLXD Separate Stack Controller
The PLXD is a great retrofit option for controlling large separate SCR stacks in either 6 or 12-pulse DC drive configurations and also for wound rotor motor SCR stack control. The unit has all the standard PL/X series drive features together with: Available for stacks up to 690 volts AC, 700 volts DC Built-in 32 amps fully automatic field controller (optional 50 amps rating) Separate gate pulse driver unit for greater noise immunity and reliability Optional current transformers Optional Ethernet and drive.web distributed control Please call for details

savvy tools for the PL dc drives

click on a parameter to open the setter

drive.web smart drives

click on a function block to drill down to the detail

INTERNET

Add a drive.web module to any drive for unlimited automation capability: Powerful programmable control functions Peer-to-peer networking over Ethernet Smart iPad or touch screen PC operation Internet access smarty - adds programmable control & extra i/o speedy - adds programmable control & gateway Get clear graphical signal flow system diagrams. Send event driven emails from your drive. All in one unique, intuitive, environment.
drive.web automation Intuitive Easy Reliable Very smart!

h View the drive

or

Signal Flow Diagram

f View the drive Engineering Info window

Import or export data Monitor trend charts Change the configuration Make drag & drop connections Manage multiple drives at the same time

44

powerSL Series Analog DC drives - up to 75 hp

The powerSL Series of dc drives incorporate the well proven SLX, SL & SLE 3-phase basic OEM chassis drives into a compact package, complete with high speed 3-phase power fuses, armature fuses (SLX & SL models only), control power fuses, contactor, and other features. Easy access to all internal power components and terminals is achieved in a compact, elegant package which, at 75hp is as small as a 81/2 x 11 note pad and is less than 101/2 deep! powerSLX Series 4-Q regenerative, reversing DC systems drive with field controller powerSL Series Non-reversing DC systems drive with field controller powerSLE Series Non-reversing DC OEM drive.

Standard Features
SL SLX SLE Field controller with automatic field weakening Configurable field bridge Heat sink thermostat protection Diagnostic test socket 50/60Hz autoranging Power supply range: 208-240 or 380-480 volts +/-10% Auxiliary control power input: 115 volts 50/60Hz. Phase rotation insensitivity Linear torque control Armature voltage or tach feedback Calibration range switches (no component change) Speed reference +/-10V or 4-20mA Speed trim input Maximum and minimum speed settings Adjustable up & down ramps Adjustable current limit Current range selectable for multiple horsepowers Torque control 150% overload capacity with 30 second stall timer Relay outputs: Stall, Zero speed, Overload Regen stop (SLX 4-quad. regen drive) Setpoint ramp reset Start inhibit after power loss LED indicators: Stall Stall Timer +/- Current Field Loss Tach Loss Peak Amps Ext. Trip Power On 25%, 50%, 95% Field Volts Speed signal output Current signal output Ramp & Total demand signal outputs Shunt wound or permanent magnet motors Stability adjustment Current reduction for low power test

powerSLX50/122, 75hp regen DC Drive

SLE44/106, 60hp DC Drive

powerDRIVE basicDRIVE 500VDC 240VDC Armature Line reactor Drive Isolation Model Model Arm Arm Current Transformer powerSL & SLX15 SL & SLX15 20hp 10hp 36 amps LM37 DIT27** powerSL & SLX20 SL & SLX20 30hp 13hp 51 amps LM52 DIT40** powerSL & SLX40 SL & SLX40 60hp 25hp 99 amps LM120 DIT75** powerSL & SLX50 SL & SLX50 75hp 35hp 122 amps LM120 DIT93** Field current controlled up to 5 amps Dimensions: basicDRIVE 9.8 high x 8 wide x 5.6 deep (248mm x 203mm x 143mm) Dimensions: powerDRIVE 11 high x 8 wide x 10.4 deep (280mm x 203mm x 265mm)

SL Series Non-Regen DC Drives & SLX Series 4Q Regen DC Drives

Protection & Control

Control fuses 3-Phase high speed semiconductor fuses Armature high speed semiconductor fuse Main AC line contactor

powerDRIVE Model powerSLE14 powerSLE24 powerSLE34 powerSLE44

SLE Series Non-reversing OEM drive

basicDRIVE 500VDC 240VDC Armature Line reactor Drive Isolation Model Arm Arm Current Transformer SLE14 20hp 10hp 34 amps LM37 DIT27** SLE24 30hp 15hp 58 amps LM52 DIT40** SLE34 50hp 20hp 82 amps LM82 DIT63** SLE34 60hp 30hp 106 amps LM120 DIT75** Field current up to 2.5 amps Dimensions: basicDRIVE 11.5 high x 8.5 wide x 6.1 deep (290mm x 215mm x 155mm) Dimensions: powerDRIVE 11.5 high x 8.5 wide x 9.4 deep (290mm x 215mm x 240mm)

Power Quality For DC Drives

Drive Isolation Transformers
Standard specification: NEMA 1 enclosed for indoor use K-factor 4 Windings: Delta Primary, Wye Secondary Aluminum or Copper windings as indicated Taps at 5% Approvals: UL, C-UL Model DIT3** DIT6** DIT11** DIT14** DIT20** DIT27** DIT34** DIT40** DIT51** DIT63** DIT75** DIT93** DIT118** DIT145** DIT175** DIT220** DIT275** DIT330** DIT440** DIT550** DIT660** Specification 3KVA - Cu (2hp) 6KVA - Cu (5hp) 11KVA - Al (7.5hp) 14KVA - Al (10hp) 20KVA - Al (15hp) 27KVA - Al (20hp) 34KVA - Al (25hp) 40KVA - Al (30hp) 51KVA - Al (40hp) 63KVA - Al (50hp) 75KVA - Al (60hp) 93KVA - Al (75hp) 118KVA - Al (100hp) 145KVA - Al (125hp) 175KVA - Al (150hp) 220KVA - Al (200hp 275KVA - Al (250hp) 330KVA - Al (300hp) 440KVA - Al (400hp) 550KVA - Al (500hp) 660KVA - Al (600hp)

Line Reactors For 3-Phase DC Drives

Model Number LM18 LM37 LM52 LM67 LM82 LM120 LM150 LM195 LM240 LM300 LM375 LM480 LM600 LM750 LM900 LM1125 hp. at 230V 5 10 15 20 25 35 40 60 75 100 150 200 hp. at 460V 10 20 30 40 50 75 100 125 150 200 250 300 400 500 600 750 Arm Amps 20 41 58 75 91 133 166 216 266 333 416 533 666 833 1000 1250 Dimensions WxDxH 6.0x4.8x3.1 7.2x5.6x3.4 7.2x5.6x3.8 9.0x7.0x4.8 9.0x7.0x4.8 10.8x8.2x5.6 10.8x8.3x5.6 9.0x7.1x4.9 10.8x8.4x5.8 10.8x8.4x6.0 10.8x8.2x7.3 14.8x14.0x10.2 15.5x14.0x11.5 15.5x14.0x13.0 15.5x14.0x15.5 22.0x20.0x14.8

Mount Holes HxW 2.1x2.0 2.3x3.0 2.6x3.0 3.2x3.0 3.2x3.0 3.5x3.6 3.5x3.6 3.2x3.0 3.2x3.6 4.2x3.6 4.2x3.6 5.9x4.6 6.8x4.6 6.8x4.6 9.3x4.6 9.5x7.2

Weight LBS 9 11 14 23 24 43 47 29 40 48 68 125 155 180 290 400

Options Outdoor enclosures Frequencies other than 60Hz Voltages other than 230/460/575 pri, 230/460 sec Special Taps Fungus Proofing 80C & 115C Rise Copper Windings Electrostatic Shield K-13, K-20, K-30 Discount Schedule SX-1

Bardac.com

45

Engineering & Support

AC and DC motors from fractional to over 2000 HP

All speed ranges, duties, enclosures and voltages complete with a full range of accessories such as encoders, tachs, thermal protection, brakes, blowers, filters, brushes and slide bases. Please call for details and competitive pricing.

Modulus Packaged Drives

Modulus solutions are a range of standard, preengineered drive packages with a selection of options for wide range common applications. Using the flexible drive.web programmable automation technology it is possible to adapt a small range of hardware configurations to a wide range of applications thereby keeping design and manufacturing costs to a minimum. Modulus drives are available either as packages mounted on an open panel, Modulus P, or as assemblies installed in an enclosure, Modulus E, to suit the type of operating environment and the control scheme required.

Every Modulus project is accompanied by a detailed, 50-point, Quality Control Report covering every facet of the product, its design, construction, testing and shipping.

Online Product Support

Using innovative, interactive, Internet online technologies we can provide either product training or product support through your browser from the comfort of your desk! Simply connect via your browser and get live interactive support where ever you are - with savvy running on your computer call +410-604-3400 and in less than a minute an engineer will be able to see your system live and give you the support you need. ... its as easy as that!

Internet

Your plant view

Unbeatable!

46

Our support view

Online Training
Online product training courses are scheduled every week with options for users of all levels of interest and ability. Sessions are completely interactive with the presenter as if you were in the same room. Level 1 - drive.web introductory seminar - 11/2 hours - Free! This provides an overview of the drive.web automation technology. Learn how to connect to drives, create drive phantoms, navigate systems, create signal flow diagrams and system drawings, find information, identify object attributes, make connections, show trend charts, build savvyPanel operator stations, etc. Level 2 - drive.web design technology course - 3 hours (Level 1 is a prerequisite) Covers configuration of drives, basic system design concepts, Ethernet networking, password protection, system safety Level 3 - drive.web system design and application courses (Level 2 is a prerequisite) 3a) Drive and device interfaces - 2 hours Covers the use of Templates and Helpers for documented drives, generic ModbusRTU master interfaces to third party drives, operator stations, etc. 3b) Winder Control Systems - 3 hours Covers standard solutions for open loop CTCW winders, closed loop dancer controlled winders and closed loop loadcell controlled winders. 3c) Encoder Control Systems - 3 hours Covers applications such as electronic line shaft, spindle orientation, registration and position control. 3d) Advanced Ethernet, Internet Access and Security - 3 hours Covers local and wide area network configuration, IP addressing, user access and device and system password protection. For course details, registration, international training options and charges please call us at 1-888-667-7333 (toll free USA 888-ON SPEED) or international at +410-604-3400. Alternatively please contact [email protected]

Field Service, Service Center Repair, Training and Start-up - Call +410-604-3400 Rates for the Continental United States
Charge Basis Rates (US$) a. Basic Rate - Field Service, Training & Start-up Assistance - up to 8 hours daily Monday to Friday, 7am to 6pm $150 per hour b. Standard Overtime - Weekdays 6pm to 7am & all day Saturday - Total work time not to exceed 12 hrs in any 24 hrs $225 per hour c. Special Overtime - Sundays, Holidays and excess of 8 hours on Saturday $300 per hour d. Overnight - Includes meals, and hotel accommodation $225 per night e. Auto Travel - Covering cost of use of company or personal cars, distance to and from the local office $0.55 per mile f. Public Transport - Rental cars, Air fares, etc. At Cost g. Holdover & Standby Time Same as service h. Travel Time - Time taken from Bardac to job site and return Same as service i. Basic Rate - Service Center Repair charges - Diagnosis & repair time $95 per hour + parts j. Design or application engineering services $150 per hour Notes: 1. Minimum service billing is 4 hours for field services, 1 hour for service center services. 2. Parts, materials, special visas, duties, and extraordinary expenses will be charged extra. 3. Warranty credits will be identified on the Daily Field Service Report.

For rates and availability of sales and service outside the US, please call +410-604-3400

24/7 Tech Support

During normal business hours basic tech support will be provided free of charge Outside normal business hours call +410-604-3535. Tech support will be provided at $300/hour (minimum of 1/2 hour per call) and this must be paid for with a credit card at the time of service.

Bardac.com

47

Everything normally in stock!

INDEX
A AC Drives 22 Closed Loop Vector 24 General Purpose AC Drives 22, 30 HVAC & Pump Drives 22, 28 NEMA 4X AC Drives 22, 32 Optidrive 22, 24, 26, 28, 30, 32 Optidrive E2 22, 30 Optidrive Plus 22, 26 Options 33 Sensorless Vector Drives 22, 26 Single Phase Motor Drives 22, 34 Vector Drives 22, 24 Application Notes Electronic Line Shaft 19 Line Drive Coordination 18, 20, 21 Process Line Coordination 18 Registration 19 Winder Controls 16 Apps Packages 15, 18, 19, 20 Automation Technology 3 C Communications 41 Configuration Tools 69 D DC Drives 3-phase Regen 40 3-phase System Drives 40 Digital 40 Single Phase 36, 37, 38 Single Phase Enclosed 38 Single-Phase Regen 37 SL Series 45 Digital DC Drives 40 Distributed Control 4 drive.web Application Solutions 15, 16, 18, 19, 20 Concept 3 Products 5 savvy software 4, 6, 8, 9, 10, 12 , 14, 15, 16, 18, 20 smarty 12 speedy 12 Systems 4 drive.web Automation 3, 5, 7, 9, 11, 13, 15 drive.web controllers 12 drive.web Line Control 18, 20, 21 K K Series DC Drives 36 L Linear Amplifier Servo Drive, 200XLV 39 M Modulus Enclosed Drive Systems 46 Modulus Packaged Drive Systems 46 Motors AC 46 Motors, DC 46 N NEMA 4X drives 32 NEMA 12 drives 32, 35 O Online Support 46 Open Loop Vector Drives 24, 26, 28 Operator Station savvyPanel 10 Optidrive 24, 26, 28 Optidrive E2 Single Phase 34 NEMA 12 Drives 35 P Packaged Modulus Drive Systems 46 PL/X Series Digital DC Drives 40 Process Line Coordination 18 Programming Tools 10 Pump drives 28 R Regenerative Drives Digital DC 40 Registration Control 19 S savvyPanel Touch Screens 10 savvy programming 9 savvy-SFD Signal Flow Diagram 8 savvy software 4, 6, 8, 10, 12, 14, 15, 16, 18, 20 Sensorless Vector Drives 24, 26, 28 Service 46, 47 Service Charges 47 Servo Drive Model 200XLV 39 smarty Controller 12 speedy Controller 12, 15 System Design Tools 69 Systems 4, 46 T Training Seminars 47 V Variable Torque Drives 28 Vector Drives 24 W WiFi Roaming 21 Winder Controls 16 drive.web smarty Dancer controlled 16 Loadcell controlled 16 Open loop CTCW 16

Bardac Corporation

E Electronic Line Shaft 19 Email Function Block 21 Engineered Apps 15 F Field Service 47 Flux Vector Drives 22, 24, 26 G General Purpose VFDs 30, 32 H HVAC drives 28 I iOS, iPad, iPhone savvyPanel 11

40 Log Canoe Circle Stevensville, MD 21666 USA www.bardac.com www.driveweb.com Phone International +410-604-3400 Phone US Toll Free 1-888-667-7333 1-888-ON SPEED Fax +410-604-3500 Catalog 2012.1