Date: 1st Jun 2020

SLIDE NO. 01

CE-426/CN-429: Building
Information Modeling
Spring 2020
Lecture 1
Term Paper Guidelines

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 02

Term Project Guidelines & Topics

Due Date: Sunday, August 30, 2020
GRADING = 10 MARKS

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 03

Term Project Guidelines & Topics

I. PROCEDURAL INSTRUCTIONS
II. SUMMARY OF SUBMITTALS/ EVALUATION
III. GRADING
IV. SUBMISSION GUIDELINES
V. Term Project Topics

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 04

I. PROCEDURAL INSTRUCTIONS

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 05

I. PROCEDURAL INSTRUCTIONS
• Step 1: This is an Individual Assignment.

• Step 2: Select a topic from the list of topics.

• Step 3: Register your Topic with Course Teacher undersigned by

Wednesday – June 03, 2020. Prepare the following format
on one A4 page as per following format and submit on
Google Classroom

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 06

I. PROCEDURAL INSTRUCTIONS

G-Suite Cell Number Topic

Name Roll No.
Email Number
Preference 1

Preference 2

Preference 3

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 07

I. PROCEDURAL INSTRUCTIONS
• Step 4: Commence work and demonstrate your progress every
week sharing recorded video with the course teacher.

• Step 5: Submit Final Report & Project Model via email and on
Google Classroom by August 30, 2020 as per following:

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 08

I. PROCEDURAL INSTRUCTIONS
• The Final Report must be submitted in soft form in MS Word format
along with all supplementary material (Revit Project Files, Families
used in Modeling, Plugins, Snapshots, Video Files, Primavera Project
Schedules, Navisworks Project File, Computer/Web Generated
Analysis Reports) via email to [email protected] and
titled as: “BIM-XX_Final_Report” with email subject heading: “CE-
426 Spring 2020 BIM-XX Final Report” [Civil Engineering Students]or
: “CN-429 Spring 2020 BIM-XX Final Report” [Civil Engineering along
with Specialization in Construction Students] (Note: XX above would
be replaced by your Group number).

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 09

The Final Report must consist of the following Seven components:

• Cover page and the Table of contents - 2 pages
• Introduction – 1-2 pages
• What is the significance of this topic?
• Brief Methodology
• Organization of the report
• Methodology – 1 to 2 pages
• Model Development Procedure – 5 to 10 pages
• Describe Software Used with Reasons
• Describe each step with Headings and Snapshots of Software/Model
• Analysis of BIM Model
• Conclusions and Recommendations – 1to 2 pages
• Impacts, Future outlook, Lessons learned, Conclusions from the analysis,
Findings/Observations, Remarks ending the paper, Limitations of Study, Recommendations.
• Appendices
• Appendices include any supporting documents, Cost Information, data analysis sheets, etc

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 10

I. PROCEDURAL INSTRUCTIONS
• Report should be submitted along with the Project Model files.
Reports without project files will be considered as INCOMPLETE.
• Along with the Report, MUST attach Project Model File, Families,
Plugins, Project Schedules, Analysis Report, Cost Information File,
Videos, Snapshots, etc.)
• Also include any other supporting document used in the development
of Model

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 11

I. PROCEDURAL INSTRUCTIONS
• Step 6: Present your Term Project in a which will be held in the
week of August 31, 2020. (Schedule to be posted later.)

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 12

II. SUMMARY OF SUBMITTALS/

EVALUATION

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 13

S. Submittal/ Grading
When?
No. Evaluation Proportion

1. Final Report August 30, 2020 80%

Week of August
2. Presentation 20%
31, 2020

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 14

III. GRADING

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 15

III. GRADING
Term Project will constitute 10 marks of CE-426/CN-429 Sessional Work
for the course, distributed as follows:
• The Final Report will be judged on the following:
• Completeness of Work
• Technical Quality of Work
• Quality of BIM Model
• Quality of Snapshots
• Clearly Mentioned Steps
• Report Presentation/ Layout
• English Usage

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 16

IV. SUBMISSION GUIDELINES

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 17

IV. SUBMISSION GUIDELINES

• Every BIM Model should be unique.
• I place emphasis on creativity, originality and innovation. Every BIM Model should be
unique and different. BIM Models of Local Housing Plans will be preferred.
• No PDF submission will be entertained.
• You are required to submit all related data including, but not limited to:
•

• Literature Collected
• Project Model File
• Project Schedule
• Model Screenshots
• Simulation, Animation, Walkthroughs, flythrough video files
• Families
• Plugins Setup (If used any)
• Cost Data
• Any other pertinent data

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 18

V. Term Project Topics

Final Papers Due: Sunday, August 30, 2020

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 19

I. BIM 3D Model of each LoD (Level of Development)

Architectural Model of each LoD will be developed like (LoD 1, LoD2 etc). Report will
contain Separate BIM Model for each LoD with detailed information.

https://youtu.be/bzzkms6wds4

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 20

II. BIM Modeling & Rendering

Autodesk Revit, 3Ds Max and A360 will be used in this project.
Architectural Modeling will be done in Revit and then different
approaches for Rendering will be used including Static and Motion
Images.

https://youtu.be/qpoeeclyecE

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 21

III. Energy Comparison of BIM Model with Different

Openings Configuration
Energy Usage of Residential/Commercial buildings largely depends upon
Building Envelopes. Different openings configuration (at least 3) will be modeled
and analyzed using Energy Analysis Engine of Autodesk Revit. Green Building
Studio may be used as well.

https://youtu.be/vli6ckgBzdY

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 22

IV. Energy Analysis of BIM Model with Detailed

Energy Analysis Report
Using Autodesk Revit’s Energy Analysis Engine and Green Building
Studio, Energy Analysis of Residential/Commercial Architectural BIM
Model will be carried out. Report will contain detailed information of
each aspect present in Computer Generated Report.

https://youtu.be/IpiGd7Bf11c

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 23

V. Sun, Shadow & Solar Study of BIM Model at Karachi

with Different Surroundings
Solar heat gain, daylight and shadows of every building depends upon the location and
surrounding. Main BIM Model will be developed using Building Elements while the
surrounding buildings can be modeled using Masses (at least 2 Arrangements).
Geographic and Weather location should be Karachi, Pakistan.

https://youtu.be/qKIQXvY8kxw

https://youtu.be/HKzXY9CZJWo

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 24

VI. Sun, Shadow & Solar Study of BIM Model at

Different Climate zones of Pakistan
Solar heat gain, daylight and shadows of every building depends upon the
location and surrounding. Sun, Shadow & Solar Study of BIM Model at
different Climate zones will be compared.

https://youtu.be/qKIQXvY8kxw

https://youtu.be/HKzXY9CZJWo

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 25

VII. BIM Architectural & Structural Model Quantity

Takeoff Verification Using Autodesk Revit &
Navisworks
BIM Model will be developed using Autodesk Revit. Quantity Take off will be
carried out using Autodesk Revit that would be verified by QTO using
Navisworks.

https://youtu.be/I0hykSR_oY4?list=PLvdUo6trYaFFBIPLrYzIl5OS
90hr0yUxK

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 26

VIII. Structural Analysis of BIM Model using

Autodesk Revit Structural Analysis System
Group will be required to develop 3D BIM Model and analyze the
structure of Model using Autodesk Revit. Report should contain Load
Cases considered and Final Results.

https://youtu.be/jOUid33ho4E

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 27

IX. Accidental Hazards Identification of Building Using

Autodesk Revit & Navisworks According to OSHA
Construction Safety Standards
Accidental hazards will be identified using Navisworks Simulation. For hazards
identification, OSHA Construction Safety Standards should be used

https://www.autodesk.com/autodesk-university/class/Visual-
Planning-BIM-Safety-2013#video

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 28

X. Development of Families for Construction Safety Equipment using

Autodesk Revit
Families for different Safety equipment like Safety Net, Railings etc. (available in Pakistan) will be
modeled using Autodesk Revit. Families should be compatible with every Revit Project. Report should
contain each step of Family Modeling with picture.

https://youtu.be/IYHHrnDzMFE

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 29

XI. Animations, Flythrough and Walkthroughs of BIM

Furnished Architectural Model with Outdoor Site
Well Furnished Architectural Model with outdoor facilities (Garage, Street) will be developed
using Autodesk Revit. Revit & 3Ds Max will be used for Animations, Flythrough and
Walkthroughs. (High Performance Computer with Core i5/i7 with at least 6 Gb Ram will be
required)

https://youtu.be/CPyyNIcLTRY

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 30

XII. 4D BIM Modeling & Simulation, Collaborating Primavera P6 with

Autodesk Navisworks
This project will be developed with the collaboration of three BIM Software. Simulation should be made
from Beginning of the Project to the End. Final Report should contain Simulation Video in Good Quality.

https://youtu.be/Sz6JK6_ZtGA

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 31

XIII. Clash Detection of BIM Architecture and

MEP Model (HVAC Only)
Autodesk Revit will be used for Architecture and MEP Modeling. Both
Model should have separate Revit project file. Clashes should be
identified between both the Models using Clash Detective Tool.
(Recommended Tool: Autodesk Navisworks)

https://youtu.be/QS03ykGSaE8

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 32

XIV. 5D Building Information Modeling

Cost Loaded 4D BIM Model will be developed using
Autodesk Revit, Navisworks & Primavera P6. Final report
should have monthly expenses of BIM Model)

https://youtu.be/vUBBJpy2GL0

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 33

XV. Development of Families for Mechanical

Equipment using Autodesk Revit
Families for different Safety equipment like Passenger Elevators,
Freight Elevators, Escalators etc. (available in Pakistan) will be
modeled using Autodesk Revit. Families should be compatible with
every Revit Project. Report should contain each step of Family
Modeling with picture.

https://youtu.be/O3B2LrgTInM

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
 Date: 1st Jun 2020
SLIDE NO. 34

Conclusion

G-Suite Cell Number Topic

Name Roll No.
Email Number
Preference 1

Preference 2

Preference 3

Wednesday – June 03, 2020

CE-426/CN-429: Building Information Modeling- Muhammad Umer

Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi