Scribd
Upload
111 views2 pages

Nightlatch Installation Instructions

Deadbolt

Uploaded by

Mattteo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views2 pages

Nightlatch Installation Instructions

Deadbolt

Uploaded by

Mattteo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RIM NIGHTLATCH

Yale ®

INSTALLATION INSTRUCTIONS

DOOR JAMB

CYLINDER
CYLINDER TRIM
STRIKE

DOOR

BACKING PLATE
LOCK BODY
MOUNTING SCREWS CONNECTING SCREWS
LOCK BODY

1. PREPARE DOOR 2. PREPARE CYLINDER

Select side of door to mount lock Assemble cylinder to cylinder trim,


and place template at the desired and insert through cylinder hole.
height. Align Line ‘A’ with the
door edge. Mark cylinder and Secure backplate to cylinder
mounting hole positions. using the 2 connecting screws
supplied. Cylinder Trim
Bore Ø32mm cylinder hole
and 3 x Ø3 mounting holes. Cut tail bar so
that it projects 12mm
beyond the inside
of the door. Tail Bar
Door Edge

TE
MP
LA
TE Backplate

Connecting Screws

P/No. YNL-121 Iss. A 1209

3
DIA 3mm

60mm
Door Edge

TEMPLATE
3. ASSEMBLE LOCK BODY 4. PREPARE DOOR JAMB
Secure lock body to the door with Mortice door jamb to accept
the 3 long wood screws supplied. strike.
For door gaps greater than
3mm, rebating of Face ‘B’
should not be required.

Mark and drill strike mounting


holes.

12mm

Strike Face B

5. ASSEMBLE STRIKE YALE GUARANTEE


ASSA ABLOY warrants its YALE branded products against defects in workmanship and materials,
subject to the limitations and exclusions set out in this Warranty. If, within the normal working life of a
Secure strike to door jamb with product, it is found to be defective, and none of the limitations and exclusions set out in this Warranty
the 3 short wood screws. apply, ASSA ABLOY will supply the same or equivalent product free of charge. This is the only remedy
granted by ASSA ABLOY under this Warranty.
Limitations
All electrical and electronic components used in ASSA ABLOY's YALE range of products (excluding batteries)
are guaranteed for a period of 12 months from the date of proof of purchase, unless stated otherwise.
Exclusions
This Warranty does not cover:
1) Damage to or malfunction or failure of the YALE product caused or contributed to by:
a) improper installation or failure to follow fitting instructions;
b) improper maintenance;
c) fair wear and tear;
d) any modification or repair which has not been authorized by ASSA ABLOY;
e) use of substitute or replacement parts or cylinders other than genuine
ASSA ABLOY parts or cylinders; or
f) use of batteries other than those specified by ASSA ABLOY.
2) The cost of:
a) removal and/or replacement of the YALE product;
b) freight and/or travelling time;
c) replacement batteries; or
d) any modification or repairs to a YALE product, unless authorised by ASSA ABLOY.
3) Damage to or deterioration of the plated finishes which are classified as soft finishes, and are
subject to deterioration under some environmental conditions.
4) Damage caused by corrosion when the Yale product is used in a corrosive environment.
5) Personal injury, property damage or economic loss, however caused. This Warranty is in addition to and
not in substitution for any rights of the purchaser under individual local legislation where the product is sold.

An ASSA ABLOY Group brand

You might also like