IBDN Fiber

Connectivity
Solutions
Reliable, Scalable, End-to-End
Networking Solutions

Our End-to-End Expertise.

Your End-to-End Solution.
 Belden has the end-to-end fiber cabling system
to meet your current networking challenges while
providing the bandwidth and scalability for the needs
of the future.

2
Our End-to-End Expertise.
Your End-to-End Solution.

IBDN Fiber Connectivity Solutions

Belden Fiber Systems Provide Reliable, End-to-End Networking Performance

Belden understands that cabling is the core foundation of every network –

its ability to provide high performance, reliable transmission is essential for
carrying out day-to-day business operations. From critical data center links that
connect network switches and servers, to horizontal and backbone links that
deliver voice, data and video for a wide range of networking, communications,
audio-visual, security and building management applications, Belden has the
end-to-end fiber cabling system to meet your current networking challenges
while providing the bandwidth and scalability for the needs of the future.

3
 FiberExpress® Systems
The System that Reduce Complexity and Increase Flexibility

Involved in the development of optical fiber components for over 40 years,

Reduce Complexity and
Belden is a leading supplier of high-quality, cost-effective optical fiber cabling
Increase Flexibility. systems. The FiberExpress (FX) Systems are the culmination of Belden’s
experience and expertise in a variety of applications, including data centers,
premise and campus network backbone infrastructures, fiber-to-the-desk (FTTD)
applications, and horizontal and centralized cabling systems. Guaranteed to
meet or exceed all applicable TIA/EIA, ISO/IEC and IEEE standards, each end-
to-end FX System is designed to offer reduced complexity, increased flexibility,
and rapid installation.

LEED Point documents are available on several products, see

specific product pages for LEED document retrieval instructions.

4
Our End-to-End Expertise.
Your End-to-End Solution.

Table of Contents
IBDN Fiber Connectivity Solutions Page
Markets 6
Applications 7
A Complete Approach to Fiber Optic Cabling 8–9
n FiberExpress® Systems
FiberExpress® System 12
FX® UHD & FX®@EASE Systems 13
FiberExpress @EASE Patch Panel Systems
®
14–19
FiberExpress® Patch Panel Systems – FX UHD Housings and Shelves 20–21
FiberExpress® Cassettes 22–25
FiberExpress Frames
®
26–27
FiberExpress® Enterprise Closet X (ECX) 28–29
n Fiber Cable Assemblies
FX@E LSZH Rated Assemblies 32–39
LSZH Patch Cords 32–33
LSZH Pigtail and Patch Cord Configurators 34–35
LSZH Trunk Assemblies 36–37
LSZH Trunk Assemblies Configurators 38–39
FX CMR/CMP Rated Assemblies 40–45
CMR/CMP Patch Cords 40–41
CMR/CMP Patch Cords and Cable Assemblies Configurators 42–43
CMR/CMP Trunk Assemblies 44–45
SFP+ Active Optical Cable/Transceiver 46–47
n Workstation
FiberExpress®Workstation Connectivity 50–55
FX Multi Box (M-Box), MDVO Multimedia Outlet Box and Multi-User Outlet Box 50–51
KeyConnect Square Faceplates 52–53
KeyConnect & MDVO Fiber Adapter Modules 54
FX Secure/Keyed LC System 55
FiberExpress® Field Termination 56–57
FX Brilliance Universal Connectors 56
FX Brilliance Universal Installation Kits and Accessories 57
FiberExpress® Fusion Splice-on Connectors 58–59
n Wall Mount Systems
FiberExpress® Wall Mount Systems 62–63
FX UHD Wall Mount 62–63
FX Ultra Wall Mount and Accessories 63–63
FiberExpress® In-Build Systems 64–65
In-Build Wall-Box 64–65
n Optical Fiber Cables
Belden Optical Fiber Cables 68
Fiber Types 69
Universal Central Loose Tube Cable with Rodent Protection, Single Jacket 70–71
Universal Mini-Breakout 72–73
Belden Warranties and Certification 74–75

5
 Markets
We are a leading The use of multiple infrastructures within the enterprise, comprised of
components from any number of infrastructure vendors and installers, adds
company serving a undue complexity to the buying and specifying process, as well as to the
updating and management of the infrastructure.
multitude of industries
with a strong focus on Adding to this complexity is the fact that most infrastructure vendors are unable
to provide both high-value legacy cabling solutions for autonomous systems
selected markets. and high-performance IP-based solutions. Unlike any other infrastructure vendor,
Belden tackles these problems by taking a universal approach to the enterprise
– resolving every signal transmission need with IP- and legacy-based solutions
that enable a smooth migration to convergence. Our high-bandwidth, high-density
copper connectivity solutions provide solutions for a diverse set of markets
including:

Local Area Networks

Full compliment of innovative and highly reliable infrastructure solutions to support

all LAN applications from building entrance to desktop.

Data Center

Consultative design of custom infrastructure solutions for optimal turn-up time,

agility, reliability and Total Cost of Ownership.

Key Markets

Data Hosting
• 
Healthcare
• 
Education
• 
Financial
• 
Government
• 

6
Our End-to-End Expertise.
Your End-to-End Solution.

Applications
Industry’s Most Extensive Enterprise Connectivity Portfolio

Fiber Cable & Connectivity

Backbone, campus, in-building and Fiber to the Desk

• 
Quick Deploy Pre-Term Systems
• 
Industry Leading Low-Loss Connectivity
• 

Infrastructure Solutions

Racks & Enclosures

• 
Rack Power Distribution
• 
Air Flow and Climate Monitoring
• 
Cable Management Accessories
• 

Copper Cable & Connectivity

Category systems for LAN and Data Center

• 
Access Control Cabling
• 
Building Automation & Control
• 

Data Center Ready Solutions

Customization & Design services

• 
Pre-configured and pre-installed
• 
Cable Management and Connectivity options

7
 A Complete Approach to
Fiber Optic Cabling
Five different With the IBDN FiberExpress Systems, Belden takes a complete approach to fiber
optic cabling. Uniquely positioned to support everything from legacy fiber
levels of Belden systems and current backbone and data center fiber links, to future high-speed
fiber transmission and long-reach fiber applications, Belden IBDN FiberExpress
IBDN FiberExpress Systems are available in five different levels to meet specific customer needs.
Systems are offered Each FiberExpress System is available with a wide range of components including:

to meet customers’ • Pre-Terminated and Field-Terminated Systems

• Field-installable connectors
specific needs. • Ultra high-density and standard patch panels and fiber management systems
• Patch cords, pigtails and pre-terminated multi-fiber cable assemblies
• Modular faceplates, modules and adapters
• Customizable hybrid cables, assemblies and housings
• Indoor and outdoor tight buffer and loose-tube distribution and trunk cables
• Interlock armor, direct burial and ruggedized cables for industrial environments

rExpress U
e
Fib

HD

IBDN
FIBEREXPRESS
SE
Fi

er
b

Exp @ E
ress

8
Our End-to-End Expertise.
Your End-to-End Solution.

Belden FX Systems are available in a variety of performance levels to meet the value and
price point for a wide variety of applications. Each system is uniquely color-coded for
easy identification in the field.

The following is a recap of the five Belden FX Systems that are offered today:

Belden System FX OM1 FX OM2 FX OM3 FX OM4 FX SM A1

OS2 - 9 µm
OM1 - 62.5 µm OM2 - 50 µm OM3 - 50 µm OM4 - 50 µm
Singlemode
Multimode Multimode Multimode Multimode
Bend Insensitive
Non-Bend Insensitive Bend Insensitive Bend Insensitive Bend Insensitive
Standard TIA-492CAAB
TIA-492AAAA TIA-492AAAB TIA-492AAAC TIA-492AAAD
ANSI/TIA-568-D.3
ANSI/TIA-568-D.3 ANSI/TIA-568-D.3 ANSI/TIA-568-D.3 ANSI/TIA-568-D.3
ISO/IEC 11801
ISO/IEC 11801 ISO/IEC 11801 ISO/IEC 11801 ISO/IEC 11801
ITU G.657.A1

1G up to 550 m
Ethernet Legacy Not Recommended for New 10G up to 400 m 10G up to 30/40 km
10G up to 300m
Applications 1G up to 275 m Designs 40G/100G up to 150 m 40G/100G up to 10/40 km
40G/100G up to 100m

4G up to 380 m
Fibre Channel Not Recommended for New
Legacy 1G up to 300 m 8G up to 300 m 16G up to 125 m 4/8/16G up to 10 km
Applications Designs
16G up to 100 m
Fiber Cable
Erika Violet
Assemblies Orange Orange Aqua Yellow
Aqua (optional)*
Jacket Color

Connector and Erika Violet Blue

Beige Black Aqua
Adaptor Color Aqua (optional)* Green (APC)

Pre-Term MPO-12 0.5 dB MPO-12 0.5 dB MPO-12 0.35 dB MPO-12 0.2 dB MPO-12 0.75 dB
Connector Loss LC/SC/ST 0.25dB LC/SC/ST 0.25dB LC/SC/ST 0.25dB LC/SC/ST 0.15dB LC/SC/ST 0.35dB

Tight Buffer (900 µm) Tight Buffer (900 µm) Tight Buffer (900 µm) Tight Buffer (900 µm) Tight Buffer (900 µm)
3.5 dB @ 850 nm 3.5 dB @ 850 nm 3.25 dB @ 850 nm 3.0 dB @ 850 nm 0.5 dB @ 1310nm
1.2 dB @ 1300 nm 1.2 dB @ 1300 nm 1.2 dB @ 1300 nm 1.0 dB @ 1300 nm 0.5 dB @ 1550 nm
Fiber Cable Loss
Enterprise Loose Tube (250 µm) Enterprise Loose Tube (250 µm) Enterprise Loose Tube (250 µm) Enterprise Loose Tube (250 µm) Enterprise Loose Tube (250 µm)
3.5 dB @ 850 nm 3.5 dB @ 850 nm 3.25 dB @ 850 nm 3.0 dB @ 850 nm 0.5 dB @ 1310nm
1.2 dB @ 1300nm 1.2 dB @ 1300nm 1.0 dB @ 1300nm 1.0 dB @ 1300nm 0.5 dB @ 1550 nm

Min. EMB N/A N/A 2000 @ 850 nm 4700 @ 850 nm N/A

(MHz∙km)

Min. OFL
200 @ 850 nm 500 @ 850 nm 1500 @ 850 nm 3500 @ 850 nm
Bandwidth N/A
500 @ 1300 nm 500 @1300 nm 500 @1300 nm 500 @1300 nm
(MHz∙km)

* Belden Standard OM4 products use Erika Violet cable with Erika Violet connectors. Aqua OM4 cable and connectors are available as Tailored products by selecting OM4 fiber with the Aqua color code.
Other combinations of fiber type and color will continue to use the default connector colors with the specified cable jacket color.

9
10
Our End-to-End Expertise.
Your End-to-End Solution.

Section Table of Contents

FiberExpress® Systems
n FiberExpress® Systems
FiberExpress® System 12
FX UHD & FX @EASE Systems
® ®
13
FiberExpress®@EASE Patch Panel Systems 14–19
FiberExpress® Patch Panel Systems – FX UHD Housings and Shelves 20–21
FiberExpress Cassettes
®
22–25
FiberExpress® Frames 26–27
FiberExpress® Enterprise Closet X (ECX) 28–29

11
 FiberExpress® System
Rack-Mount Fiber Connectivity System

The elegantly simple solution for incorporating flexibility,

manageability and scalability into high-density fiber channels.

Faster
• Faster field-termination with sliding, tilting drawers
• Faster pre-term installation with fixed shelves and cassettes
• Faster MACs with fewer components

Easier
• Easier installation with tool-less removable drawers and lighter weight
• Easier port identification with clear visible labeling
• Easier configuration with LC, SC, ST and MPO modules

Better
• Better fiber protection with covered patch cord tray
• Better density with up to 72 LC Duplex ports per 1U
• Better visibility with Titanium finish options

With the same look and feel, the cost effective FX UHD Shelf and the feature-rich FX UHD Housing can be
mixed and matched to create unique Half Pre-Term systems that provide field termination benefits like exact
cable length, the ability to fit in smaller conduits, and rapid cost-effective installation of pre-term solutions.

Termination Type Feature-Rich FX UHD Housing Entry-Level FX UHD Shelf

Pre-Term Assemblies
MPO Trunks  
Jacketed Fan-Out  
900 µm Fan-Out  X
Field Termination
Pig-Tail w/Splicing  X
900 µm Connectorization (ie. FX Brilliance)  X
Jacketed Connectorization  

12
Our End-to-End Expertise.
Your End-to-End Solution.

FX® UHD & FX®@EASE Systems

• Easy configuration for a variety of applications with LC, SC, ST and MPO modules The ultra high-density
and better density with up to 72 LC Duplex or MPO ports per 1U
• Faster installation with lighter weight, tool-less removable drawers and overall fewer rack-mount fiber connectivity
components
system from Belden® that
• Superior access, fiber protection and port identification with sliding, tilting drawers,
covered patch cord tray and clear visible labeling offers an elegantly simple
With support for both legacy ST and SC and modern LC and MPO applications, the solution for incorporating
FX UHD offers cost effective migration from current 1G and 10G to 40G and 100G
applications with only a simple cassette or adapter frame change – and it includes all
flexibility, manageability and
the installation and management features needed to maintain maximum uptime. scalability into high-density
The FX UHD System provides superior port access and protection with up to double the fiber channels.
density of comparable units for a 50% space reduction. The intuitive, modular design of
the system also means fewer components and a single system to support a variety of
port counts and configurations.
The FX UHD System includes a wide
Applications range of pre-terminated cassettes and
field-terminated frames to support
Ideal for fast, reliable, low-cost installations with maximum efficiency, capacity and uptime, virtually any high-density fiber
the FX UHD System is designed for rapid deployment of high-density fiber interconnects connectivity need while offering cost
and cross connects at active equipment in data centers, SAN environments and LANs. effective migration from current 10G
to 40 and 100G applications.
Whether in a top of rack, end of row or centralized environment, the system’s modular
design accommodates high-performance, low-loss fiber architectures with superior
flexibility and reconfigurable components to support current 1G and 10G applications and
easy migration to future 40G and 100G applications. Using low-loss pre-terminated cassettes
and assemblies with the FX UHD System also supports the use of zone distribution areas
(ZDAs) that enable pre-cabling the core switch to the row and then rapid deployment down
the row as more capacity is needed.

The system’s reduced physical footprint offers additional mounting options in both Data
Centers and LANs – in shallow racks and cabinets, vertical mounting configurations, and
even floor and ceiling boxes. Using Belden KeyConnect frames with modular inserts, the
FX UHD System makes it possible to combine fiber, copper and multimedia connectivity
in mixed media environments – all in the same rack unit of space.

Features
• Support for both pre-term installation • Efficient one-person installation with
and field termination tool-less removable drawers and lighter
• Better density with up to 72 LC Duplex weight (4U FX UHD weighs just 2.4 kg)
or MPO ports per 1U • Titanium finish option for better
• Adaptable for present and future needs visibility, reduced lighting needs and
with LC, SC, ST and MPO modules contrast against white cabinets
• 1U, 2U, and 4U configurations and 19” • Sleek front faceplate for easy shelf
and 23” rack mount options identification and clear visible labeling
• Superior cable management and port for easy port identification
access with sliding, tilting drawers
• Better fiber protection with covered
patch cord tray

13
 FiberExpress®@EASE
Patch Panel Systems
Solutions for Quicker and Easier Future Proof Fiber Management through
Intelligent Readiness

The new FiberExpress@EASE panel is designed and manufactured high quality you
expect from Belden with space saving technology to offer improved installation times
and a faster Return on Investment (RoI) via:
• Simple 1u footprint
• Easier in-rack management
• Pre-loaded adapters ready for installation
• Splice tray including

FO Panels:
• 48-port termination/splice panel set (with 24x duplex LC or SC
in OS2, OM3 or OM4, including splicing cassette and pigtail set)
• 48-port MPO panel set (with 24x duplex LC or SC in OS2, OM3 or OM4,
including MPO/LC or MPO/SC assembly set)

Belden PatchPro® FO Panel

14
Our End-to-End Expertise.
Your End-to-End Solution.

FiberExpress@EASE Panels
Fiber Connectivity MPO Patch Panels Part Number

PatchPro 48-port LC/UPC-DX OS2 iPLM Ready MPO Panel Set PPLSMPOR

PatchPro 48-port SC/UPC-DX OS2 iPLM Ready MPO Panel Set PPSSMPOR

PatchPro 48-port LC/APC-DX OS2 iPLM Ready MPO Panel Set PPLAMPOR

PatchPro 48-port SC/APC-DX OS2 iPLM Ready MPO Panel Set PPSAMPOR

PatchPro 48-port LC OM3 iPLM Ready MPO Panel Set PPL3MPOR

PatchPro 48-port SC OM3 iPLM Ready MPO Panel Set PPS3MPOR

PatchPro 48-port LC OM4 iPLM Ready MPO Panel Set PPL4MPOR

PatchPro 48-port SC OM4 iPLM Ready MPO Panel Set PPS4MPOR

PatchPro 48-port LC/UPC-DX OS2 iPLM Ready MPO alternate Panel Set PPLSMPOR-ALT

PatchPro 48-port SC/UPC-DX OS2 iPLM Ready MPO alternate Panel Set PPSSMPOR-ALT

PatchPro 48-port LC/APC-DX OS2 iPLM Ready MPO alternate Panel Set PPLAMPOR-ALT

PatchPro 48-port SC/APC-DX OS2 iPLM Ready MPO alternate Panel Set PPSAMPOR-ALT

PatchPro 48-port LC OM3 iPLM Ready MPO alternate Panel Set PPL3MPOR-ALT

PatchPro 48-port SC OM3 iPLM Ready MPO alternate Panel Set PPS3MPOR-ALT

PatchPro 48-port LC OM4 iPLM Ready MPO alternate Panel Set PPL4MPOR-ALT

PatchPro 48-port SC OM4 iPLM Ready MPO alternate Panel Set PPS4MPOR-ALT

Fiber Connectivity Term/Splice Patch Panels Part Number

PatchPro 48-port LC/UPC-DX OS2 iPLM Ready Term/Splice Panel Set PPLSTSR

PatchPro 48-port SC/UPC-DX OS2 iPLM Ready Term/Splice Panel Set PPSSTSR

PatchPro 48-port LC/APC-DX OS2 iPLM Ready Term/Splice Panel Set PPLATSR

PatchPro 48-port SC/APC-DX OS2 iPLM Ready Term/Splice Panel Set PPSATSR

PatchPro 48-port LC OM3 iPLM Ready Term/Splice Panel Set PPL3TSR

PatchPro 48-port SC OM3 iPLM Ready Term/Splice Panel Set PPS3TSR

PatchPro 48-port LC OM4 iPLM Ready Term/Splice Panel Set PPL4TSR

PatchPro 48-port SC OM4 iPLM Ready Term/Splice Panel Set PPS4TSR

Includes all Connectivity, without RFID & Hardware

Add -H for half loaded panels after the part number(half loaded panels will come with 24 pigtails)

15
 FiberExpress®@EASE
Patch Panel Systems
Fiber Solutions for Even Faster Performance

In today’s information-intensive world, optical fiber networks are increasingly being used
to support mission-critical data transmissions in financial and government institutions,
large enterprises, educational and healthcare facilities across the globe.

Belden fiber solutions meet or exceed all applicable TIA/EIA, ISO/IEC and IEEE standards
and offer:
• High bandwidth and transmission speed
• The potential for network growth
• Extended reach – distance
• Fault tolerance
• Greater data security
• Support for Gigabit and multi-Gigabit protocols and networked applications
• Reduced design complexities
• Quick installation
• Increased flexibility

FE Ease SC
DUPLEX SlideoutPanel

16
Our End-to-End Expertise.
Your End-to-End Solution.

FiberExpress@EASE Panels
Description Part Number

19" 1U OM2, 24-port, ST Simplex, Term/Splice Panel NN01406.MM24

19" 1U OM3, 24-port, ST Simplex, Term/Splice Panel NN01406.3M24

19" 1U OS2, 24-port, ST Simplex, Term/Splice Panel NN01406.SM24

19" 1U OM2, 24-port, FC Simplex, Term/Splice Panel NN01407.MM24

19" 1U OM3, 24-port, FC Simplex, Term/Splice Panel NN01407.3M24

19" 1U OS2, 24-port, FC Simplex, Term/Splice Panel NN01407.SM24

Configuration for half loaded pigtails Part Number

19" 1U OM2, 24-port, ST Simplex, Term/Splice Panel NN01406.MM12

19" 1U OM3, 24-port, ST Simplex, Term/Splice Panel NN01406.3M12

19" 1U OS2, 24-port, ST Simplex, Term/Splice Panel NN01406.SM12

19" 1U OM2, 24-port, FC Simplex, Term/Splice Panel NN01407.MM12

19" 1U OM3, 24-port, FC Simplex, Term/Splice Panel NN01407.3M12

19" 1U OS2, 24-port, FC Simplex, Term/Splice Panel NN01407.SM12

17
 FiberExpress®@EASE
Patch Panel Systems
The KeyConnect Patch Panel Series:

Includes the unique AngleFlex Patch Panel available in 24-port/1U and 48-port/2U
• 
configurations. Patent-pending removable angled inserts provide intuitive left, right or
bi-directional patch cord routing and more efficient switch connection. Angled inserts
eliminate the need for horizontal cable management, for a 27% space savings per rack.
• The Flex Patch Panel series is available in 24-port/1U and 48-port/2U configurations,
and is designed to be populated using Category Modular Jacks, Fiber Adapters or
Multimedia Modules.

Physical and Mechanical Characteristics

Multimode LC module: beige and aqua adapters with phosphor bronze sleeve
• 
Single-mode LC module: blue adapter with ceramic sleeve
• 
ST Compatible MM/SM: metal adapter with ceramic sleeve
• 
Materials: Fire-retardant plastic UL94V-0
• 
Colors: Almond, electrical white and black
• 

Packaging
KeyConnect Modular Jacks – Individually packaged
• 
KeyConnect Multimedia Modules – 10 units in a clear plastic bag
• 

10GX AngleFlex 10GX AngleFlex

Patch Panel, 1U, Patch Panel, 2U,
24-port, Black 48-port, Black

18
Our End-to-End Expertise.
Your End-to-End Solution.

FiberExpress@EASE Panels

Description Part Number

AngleFlex Patch Panel, 1U, 24-port, Black AX103248

AngleFlex Patch Panel, 2U, 48-port, Black AX103249

Part Number
Description
Almond Electr. White Black

KeyConnect Multimedia Modules

Multimedia Modules, Copper
3.5 mm Audio Coupler, F/F, Gold AX105334-AL AX105334-EW AX105334-BK AX102417
3.5 mm Audio Coupler, F/Solder, Gold AX105335-AL AX105335-EW AX105335-BK LC Duplex module

S-video Coupler, F/F AX105336-AL AX105336-EW AX105336-BK

RCA Gold-plated Coupler, F/F, Red AX105337-AL AX105337-EW AX105337-BK
RCA Gold-plated Coupler, F/F, White AX105338-AL AX105338-EW AX105338-BK
RCA Gold-plated Coupler, F/F, Yellow AX105339-AL AX105339-EW AX105339-BK
RCA Gold-plated Coupler, F/F, Green AX105340-AL AX105340-EW AX105340-BK
RCA Gold-plated Coupler, F/F, Blue AX105341-AL AX105341-EW AX105341-BK
Video F Coax 3GHz, Recess, Gold-Plated AX105346-AL AX105346-EW AX105346-BK
Video F Coax, Recessed AX102903 AX102904 AX102905
Video F Coax, Flush AX102906 AX102907 AX102908
Video BNC Coax, Flush AX104573 AX104575 AX104574
USB 3.0 Coupler, A to A AX105342-AL AX105342-EW AX105342-BK
USB 2.0 Coupler, B to B AX105344-AL AX105344-EW AX105344-BK
HDMI Coupler (Version 1.4) AX105345-AL AX105345-EW AX105345-BK
Multimedia Modules, Fiber
LC Duplex OM3 (Aqua Adapter) AX104937 AX104938 AX104939
LC Duplex OM4 (Erika Violet Adapter) AX105641-AL AX105641-EW AX105641-BK
LC Duplex SM (Blue Adapter) AX102419 AX102420 AX102421 AX105342-EW
USB 3.0 Coupler
LC Duplex SM/APC (Green Adapter) AX105642-AL AX105642-EW AX105642-BK and AX105345-EW HDMI Coupler
SC Duplex OM3 (Aqua Adapter) AX105643-AL AX105643-EW AX105643-BK
SC Duplex SM (Blue Adapter) AX102686 AX102687 AX102688
SC Duplex SM/APC (Green Adapter) AX105374-AL AX105374-EW AX105374-BK

19
 FiberExpress ® Patch Panel Systems
FX UHD Housings and Shelves

Elegantly simple yet uncompromisingly flexible. Ultra high-density rack-mount fiber

Top: AX104681, connectivity system, crafted for effortless installation and maintenance.
FX Ultra HD 1U Patch Panel Housing
Bottom: AX104683, FX UHD 4U Patch Panel Housing Faster
(shown loaded)
• 
Faster field-termination with high-accessibility sliding and tilting drawers
• 
Faster pre-term installation with simple fixed shelves and cassettes

Easier
Easier installation with tool-less removable drawers and lightweight housings
• 
• Easier port identification with clear visible labeling

Easier to configure with flexible port count LC, SC, ST and MPO modules
• 

Better
AX104681, • 
Better fiber protection with covered patch cord tray
FX UHD Patch Panel
• 
Better high density offering with 18-port modules for up to 72 LC Duplex ports per 1U
1U with Mounted Splice Housing Kit (AX104684)
• 
Better visibility with light colored Titanium finish

Top: AX105164, FX UHD 1U Patch Panel Standard Shelf

Bottom: AX105167, FX UHD 4U Patch Panel Recessed
Shelf (shown loaded)

XPE-S0003, FX UHD Basket Hanger for AX105700, FX UHD Fiber

1U FX UHD Patch Panel Housings and Shelves Management Spool Kit

Use Titanium patch panels to reduce lighting

requirements and improve visibility as well
as providing sufficient contrast against white
Left: FXFUBRSHM, FX UHD Single Cassette Holder AX105813 FX UHD 1U Bezel cabinets to avoid the snow blind effect.
with Magnetic Attachment
Right: FXFUBRDHM FX UHD Double Cassette Holder
with Magnetic Attachment (Bottom)

Optimizes Space in Mixed Media Environments

For rapid expansion within a data center as it grows,
Belden Low-Loss Pre-term solutions using the FX
UHD System enables ZDA (zone distribution) Belden KeyConnect frames with modular inserts makes
architectures. ZDA allows pre-cabling the core it possible to combine fiber, copper and multimedia
switch to the row on Day 0 and rapid deployment FFZH06KC,
connectivity – all in the same rack unit of space with FX Ultra KeyConnect
down the row on Day 1 as capacity is needed.
in any member of the FX UHD family. Frame, 6-Port

20
Our End-to-End Expertise.
Your End-to-End Solution.

FX UHD Housings

Feature-rich housings are fully enclosed to provide protection for exposed 250 µm and
900 µm fibers coupled with sliding and tilting drawers to speed up and simplify installation
and maintenance.

Number Total LC Duplex/ Total LC Duplex/ Belden Part Number

of MPO Ports using MPO Ports using
Description Module FX Ultra Frames FX UHD Frames
Bays and Cassettes and Cassettes Titanium
1U Housing with Front and
4 48 72 AX104681
Rear Cable Tray
2U Housing with Front and Rear Cable Tray 8 96 144 AX104682

4U Housing with Front and Rear Cable Tray 16 192 288 AX104683
Optional 1U Splice Housing Kit, 144 splices
N/A N/A N/A AX104684
(add up to 4 on the 4U Housing)1
Optional Patch Cord Tray Cover, 19” 2
N/A N/A N/A AX105162
1. Up to 4 splice housing kits can be added to 4U housings. Splice housing kits are only compatible with standard 19” rack mount housings.
2. Use with 1U or 4U housings to protect the contents of the topmost patch cord tray.

FX UHD Shelves, Single Cassette Holder

Entry-level cost effective solutions for pre-terminated systems.

Number Total LC Duplex/ Total LC Duplex/ Belden Part Number

of MPO Ports using MPO Ports using
Description Module FX Ultra Frames FX UHD Frames
Bays and Cassettes and Cassettes Titanium
1U FX UHD Bezel 4 48 72 AX105813
1U Standard Fixed Shelf 4 48 72 AX105164
1U Recessed Fixed Shelf 4 48 72 AX105165
4U Standard Fixed Shelf 10 120 180 AX105166
4U Recessed Fixed Shelf 10 120 180 AX105167

FX UHD Single & Double Cassette Holders Magnetic Non-Magnetic

Single Cassette Holder (Black Finish) 1 18 12 FXFUBRSHM FXFUBRSHM

Double Cassette Holder (Black Finish) 1 36 24 FXFUBRDHM FXFUBRDHS

Standard FX Ultra KeyConnect Frames

Patch Ports Description Belden Part Number
6 FX Ultra KeyConnect Frame 6-Port FFZH06KC
8 FX Ultra KeyConnect Frame 8-Port FFZH08KC

Standard FX UHD Accessories

Description Belden Part Number
FX UHD Blank Plate FFZH00BB
FX UHD Patch Cord Release Tool AX104685
FX Ultra LC Duplex Color-coded Icon Kit AX104572
FX UHD Fiber Management Spool kit, includes base plates and eight spool segments AX105700
1U Rackmount Enclosure for Cable Tray Mounting XPE-S0003

21
 FiberExpress® Cassettes
FX UHD and FX Ultra Cassettes

FCSH18LDMF, FX UHD Cassette, OS2, 18 Ports, Featuring the highest density at 72 LC Duplex or MPO ports per 19” rack unit FX UHD
MPO-12 (female), LC Duplex, Type-A, Blue Adapters family is the ideal choice for high-port count applications such as in the data center.

Unique 1” pull-out feature of the FX Ultra family provides a medium density solution
with a superior ease of use for day-to-day MAC (moves, adds and changes) within the
Enterprise or cross-connect within the data center.

FC3U12LDMF1A, FX Ultra Cassette, OM3, Pair a Type-A and Type-A ALT on Type-B MPO Trunk to ensure correct port number
12 Ports, MPO-12 (female), LC Duplex, and to provide simple upgrade path to SR4 (40G/100G) protocols.
Type-A ALT, Aqua Adapters

Use manageable density FX Ultra modules in dynamic patching environments

where ease of access and use and speed are critical.
Use FX UHD modules in static patching environments were density is the critical factor.

FC3H12LDFS,
FX UHD Splice Cassette, Use Angled cassettes for MoR or EoR (Middle or End of Row) when combining with
OM3, 12 Ports, LC duplex, Aqua Adapters Belden AngleFlex copper patch panels to achieve a clean uniform appearance.

FCZH00BBFS, FX UHD Angled Cassettes, 12 Ports, LC Duplex and 6 Ports,

FX UHD Empty Splice Cassette SC Duplex. See Tailored SmartPart numbers for Details.

Tailored FX UHD and FX Ultra Cassettes (Base12)

Building a SmartPart Number

3. Choose 4. Choose 5. Choose 6. Choose
Fixed Letter 1. Choose 2. Choose Port Count Connector Connector Polarity
(Patch Side) 7. Choose
Series Fiber Type Product Family (Patch Side) (Trunk Side) (Trunk) Adapter Color

FC 3 U 03 LD MM A A
Fiber Type Product Family Port Count (Patch Connector (Patch Side) Connector (Trunk Side) Polarity (Trunk) Adapter Color
Side)
1 OM1 H FX UHD LD LC Duplex MM MPO-12 (m) A Type-A T Beige
03
3 OM3 U FX Ultra (1” Pull) LA LC/APC Duplex MF MPO-12 (f) 1 Type-A ALT. N Black
06
4 OM4 L FX U Angled Left SD SC Duplex A Aqua
12
S OS2 R FX U Angled Right SC SC Simplex E Erika V.
18
SA SC/APC Duplex B Blue
SB SC/APC Simplex G Green
For further options contact Belden for custom Engineered solutions. ST ST

22
Our End-to-End Expertise.
Your End-to-End Solution.

Standard Type-A Cassettes (Base12)

Description Belden Part Number
Patch Ports Trunk Ports OM1 Beige OM3 Aqua OM4 Erika OS2 Blue OS2/APC Green
Family
(fibers) Adapters Adapters Violet Adapters Adapters Adapters
LC Duplex to MPO-12(12f) Female
18 (36) 3 FX UHD* – FC3H18LDMF FC4H18LDMF FCSH18LDMF FCSH18LAMF
12 (24) 2 FX Ultra FC1U12LDMF FC3U12LDMF FC4U12LDMF FCSU12LDMF FCSU12LAMF
SC Duplex to MPO-12(12f) Female
6 (12) 1 FX Ultra FC1U06SDMF FC3U06SDMF FC4U06SDMF FCSU06SDMF FCSU06SAMF
SC Simplex to MPO-12(12f) Female
12 (12) 1 FX Ultra – – – FCSU12SCMF FCSU12SBMF
*Optional HD Patch cord release tool AX104685

Standard Type-A-Alternate Cassettes (Base12)

Description Belden Part Number
Patch Ports Trunk Ports Family OM1 Beige OM3 Aqua OM4 Erika OS2 Blue OS2/APC Green
(fibers) Adapters Adapters Violet Adapters Adapters Adapters
LC Duplex to MPO-12(12f) Female
18 (36) 3 FX UHD – FC3H18LDMF1A FC4H18LDMF1E FCSH18LDMF1B FCSH18LAMF1G
12 (24) 2 FX Ultra FC1U12LDMF1T FC3U12LDMF1A FC4U12LDMF1E FCSU12LDMF1B FCSU12LAMF1G
SC Duplex to MPO-12(12f) Female
6(12) 1 FX Ultra FC1U06SDMF1T FC3U06SDMF1A FC4U06SDMF1E FCSU06SDMF1B FCSU06SAMF1G
SC Simplex to MPO-12(12f) Female
12(12) 1 FX Ultra – – – FCSU12SCMF1B FCSU12SBMF1G

Standard Splice Cassettes

Description Belden Part Number
Patch Ports OM1 Beige OM3 Aqua OM4 Erika SM Blue OS2/APC Green
(fibers) Adapters Adapters Violet Adapters Adapters Adapters
MPO Type-A (Key-Up/Key-Down)
12 (144) FC1H12MPFS FC3H12MPFS FC4H12MPFS – FCSH12MPFS
LC Duplex
12 (24) FC1H12LDFS FC3H12LDFS FC4H12LDFS FCSH12LDFS FCSH12LAFS
SC Duplex
6 (12) FC1H06SDFS FC3H06SDFS FC4H06SDFS FCSH06SDFS –
SC Simplex
12 (12) – – – – FCSH12SBFS
ST (Metal Adapters)
12 (12) FCSH12STFS
Splice Only (No Adapters)
N/A (144) FCZ00BBFS
FX Brilliance Universal (page 49) or FX Pigtails (page 31 or 39) sold separately.

Standard FX UHD Angled Cassettes (Base12)

Description Left Right
Patch Ports OM3 Aqua OM4 Erika Violet SM Blue OM3 Aqua OM4 Erika Violet OS2 Blue
(fibers) Adapters Adapters Adapters Adapters Adapters Adapters
LC Duplex to MPO-12(12f) Female Type-A
12(24) FC3L12LDMF FC4L12LDMF FCSL12LDMF FC3R12LDMF FC4R12LDMF FCSR12LDMF
LC Duplex to MPO-12 (12f) Female Type-A Alternate
12(24) FC3L12LDMF1A FC4L12LDMF1E FCSL12LDMF1B FC3R12lDMF1A FC4R12LDMF1E FCSR12LDMF1B
SC Duplex to MPO-12(12f) Female Type-A
6 (12) FC3L06SDMF FC4L06SDMF FCSL06SDMF FC3R06SDMF FC4R06SDMF FCSR06SDMF
SC Duplex to MPO-12(12f) Female Type-A Alternate
6 (12) FC3L06SDMF1A FC4L06SDMF1E FCSL06SDMF1B FC3R06SDMF1A FC4R06SDMF1E FCSR06SDMF1B

23
 FiberExpress® Cassettes
Belden FX UHD Base8 Cassettes

Optimized for SR4 and PSM4 based architectures like 40G and 100G Ethernet as well
as Compute, Switch and Storage equipment with groupings of 4, 8 and 12 ports. Belden
Base8 Cassettes optimize costs when used with Base8 MPO Trunks and Patch cords by
eliminating dark fiber associated with SR4 & PSM4 architectures.

FC3U034MMF,
FX UHD Optimizer
Cassette, OM3, Aqua Adapters

FCSU12LD4F,
FX Ultra Cassette,
OM3, 12 Ports, MPO-12 (female), LC Duplex,
Type SR4 (Base8), Aqua Adapters

Tailored FX UHD and FX Ultra Cassettes (Base8)

Building a SmartPart Number

3. Choose 4. Choose 5. Choose 6. Choose
Fixed Letter 1. Choose 2. Choose Port Count Connector Connector Polarity
(Patch Side) 7. Choose
Series Fiber Type Product Family (Patch Side) (Trunk Side) (Trunk) Adapter Color

FC 3 U 04 LD 4M 4 A
Fiber Type Product Family Port Count Connector (Patch Side) Connector (Trunk Side) Polarity (Trunk) Adapter Color
(Patch Side)
3 OM3 H FX UHD LD LC Duplex 4M MPO-12 (8f) Male 4 SR4 (Base8) A Aqua
04 4 Ports
4 OM4 U FX Ultra 4F MPO-12 (8f) Female E Erika V.
08 8 Ports
S OS2 L FX U Angled Left B Blue
12 12 Ports
R FX U Angled Right
16 16 Ports
For further options contact Belden for custom Engineered solutions.

24
Our End-to-End Expertise.
Your End-to-End Solution.

Standard SR4 Optimizer Cassettes (Base8)

Description Belden Part Number
OM3 Aqua OM4 Erika OS2/APC Green
Patch Ports (fibers) Trunk Ports Family Adapters Violet Adapters Adapters
MPO-12(8f) Male to MPO-12(12f) Female

6 x MPO-12 (8f) 4 x MPO-12 (12f) FX Ultra FC3U064MMF FC4U064MMF FCSU064MMF

3 x MPO-12 (8f) 2 x MPO-12 (12f) FX Ultra FC3U034MMF FC4U034MMF FCSU034MMF

Standard SR4 Cassettes (Base8)

Description Belden Part Number
OM3 Aqua OM4 Erika OS2 Blue
Patch Ports (fibers) Trunk Ports Family Adapters Violet Adapters Adapters
LC Duplex to MPO-12(8f) Female

16 (32) 4 FX UHD FC3H16LD4F FC4H16LD4F FCSH16LD4F

12 (24) 3 FX Ultra FC3U12LD4F FC4U12LD4F FCSU12LD4F
8 (16) 2 FX Ultra FC3U08LD4F FC4U08LD4F FCSU08LD4F
4 (8) 1 FX Ultra FC3U04LD4F FC4U04LD4F FCSU04LD4F

Standard SR4 Angled Cassettes (Base8)

Description Left Right
Patch Ports OM3 Aqua OM4 Erika Violet OS2 Blue OM3 Aqua OM4 Erika Violet OS2 Blue
(fibers) Adapters Adapters Adapters Adapters Adapters Adapters
LC Duplex to MPO-12(8f) Female
12 (24) FC3L12LD4F FC4L12LD4F FCSL12LD4F FC3L12LD4F FC4L12LD4F FCSL12LD4F

25
 FiberExpress® Frames
Tailored FX UHD and FX Ultra Frames

Building a SmartPart Number

4. Choose
Fixed Letter 1. Choose 2. Choose 3. Choose Connector for 5. Choose
Series Fiber Type Product Family Port Count Patch Side Adapter Color

FF 3 H 18 LD A
Fiber Type Product Family Port Count Connector Adapter Color
(Patch Side) (Patch Side)
1 OM1 H FX UHD T Beige
3 OM3 U FX Ultra (1” Pull) 03 LD LC Duplex N Black
4 OM4 06 LA LC/APC Duplex A Aqua
S OS2 12 LS LC Duplex
w/Shutters E Erika V.
18 B Blue
SD SC Duplex
SC SC Simplex G Green
SA SC/APC Duplex
SB SC/APC Simplex
SS SC Duplex
w/ Shutters
SC Simplex
SR w/ Shutters
ST ST
MP MPO Up/Down
MR MPO Up/Up

FF3H18LD,
FX UHD Frame, OM3,
18 Ports, LC Duplex,
Aqua Adapters

AX104572,
FX Color-coded
Icon Kit, (shown on frame)

FF3U12LD,
FX Ultra Frame, OM3,
12 Ports, LC Duplex,
Aqua Adapters

26
Our End-to-End Expertise.
Your End-to-End Solution.

Standard FX UHD and FX Ultra Frames

Description Belden Part Number

Patch Ports OM1 Beige OM3 Aqua OM4 Erika SM Blue SM/APC Green
Family
(fibers) Adapters Adapters Violet Adapters Adapters Adapters
MPO Type-A (Key-Up/Key-Down)
18 FX UHD – FF3H18MP FF4H18MP – FFSH18MP
12 FX Ultra – FF3U12MP FF4U12MP – FFSU12MP
LC Duplex
18 (36) FX UHD – FF3H18LD FF4H18LD FFSH18LD FFSH18LA
12 (24) FX Ultra FF1U12LD FF3U12LD FF4U12LD FFSU12LD FFSU12LA
SC Duplex
6 (12) FX Ultra FF1U06SD FF3U06SD FF4U06SD FFSU06SD FFSU06SA
SC Simplex
12 (12) FX Ultra – – – FFSU12SC FFSU12SB
ST
12 (12), Metal FX Ultra FFSU12ST –

KeyConnect Fiber Modules

Belden Part Number
Description
Almond Elec. White Black
LC Duplex - OM3 (Aqua Adapter) AX104937 AX104938 AX104939
LC Duplex - OM4 (Erika Violet Adapter) AX105641-AL AX105641-EW AX105641-BK
SC Simplex OM1 (Beige Adapter) AX102683 AX102684 AX102685
SC Simplex - OM3 (Aqua Adapter) AX105643-AL AX105643-EW AX105643-BK
ST- Metal AX102242 AX102243 AX102244

27
COMING
SOON FiberExpress® Enterprise Closet X (ECX)
Improving on Best-in-Class!

Belden’s new FiberExpress (FX) Enterprise Closet X (ECX) Patch Panel system is an
elegant, intuitive and flexible solution that has been designed to maximize installer
flexibility when compared to industry-leading solutions. FX ECX has been optimized
for LAN environments, and provides an easy-to-deploy, efficient solution for installers.

Benefits

Maximum installer flexibility for frequent MAC work: Front and rear
• 
removable cassettes (patent pending) on all housings (1U, 2U, 4U).
Multiple options for cable strain relief.
Simplified installation with fewer detachable components: Cassette rails molded into
• 
ECX-04U housing. No need for extra rail components that can get lost.
Reduce space and cost: ECX accepts mixed-media copper/fiber using KeyConnect
• 
frames. Leverage our broad line of KeyConnect copper connectivity products.
Eliminate cassette pinch points: ECX Splice Cassettes integrate slack management
• 
into the cassette lid. This simplifies fiber routing and eliminates pinch points.

Features

Up to 192 LC Duplex ports (384 fibers) in 4U housing

• 
Tool-less, removable, clear doors and top covers
• 
Clear top cover for better light and visibility
• 
Removable front and rear housing (4U)
• 
Complete family of cassettes and frames
• 
- LC, SC, ST and MPO adapters available
Supports all modern field-termination techniques
• 
- Pigtails with splice trays
- Splice cassettes
- Splice-on connectors (FX Fusion)
- Mechanical splice connectors
(FX Brilliance Universal)

28
Our End-to-End Expertise.
Your End-to-End Solution.

Ordering Information

FX ECX Housings Kits/Accessories

Description Max Capacity Belden Part Number Description Belden Part Number
1U Housing 2 Cassettes or Frames ECX-01U 3 Inch Bracket Mount (4U) ECX-BRKTMNT-3
2U Housing 4 Cassettes or Frames ECX-02U Flush Bracket Mount (4U) ECX-BRKTMNT-0
4U Housing 12 Cassettes or Frames ECX-04U Lock Kit (1U/2U/4U) ECX-LOCKKIT

Additional resources available, see belden.com/ecx for more information.

Splice Cassettes
Description Belden Part Number
OM3 Aqua OM4 Erika Violet OS2 Blue OS2 APC Green
Patch Ports (fibers) Adapters Adapters Adapters Adapters
LC Duplex
12 (24) FC3X12LDFS FC4X12LDFS FCSX12LDFS FCSX12LAFS
SC Duplex
12 (24) FC3X12SDFS FC4X12SDFS FCSX12SDFS FCSX12SAFS

Please see table below for more adapter/port count options!

To use the configuration matrices, make a selection from each category and combine to form a custom part number. See examples below.

FX ECX Splice Cassette Options Part number example from configuration shown below: FCSX06SCFS

FC S X 06 SC FS
Port Count Connector Connector
Fiber Type Family (Patch Side) (Patch Side) (Trunk Side)
1 OM1 X ECX 03 3 ports LD LC Duplex FS Splice Cassette
3 OM3 06 6 ports LA LC Duplex APC
4 OM4 08 8 ports SD SC Duplex
S OS2 12 12 ports SC SC Simplex
SA SC Duplex APC
SB SC Simplex APC
ST ST

FX ECX Frames/Adapter Strips

Description Belden Part Number
OM3 Aqua OM4 Erika Violet OS2 Blue OS2 APC Green
Patch Ports (fibers) Adapters Adapters Adapters Adapters
LC Duplex
12 (24) FF3X12LD FF4X12LD FFSX12LD FFSX12LA
SC Duplex
12 (24) FF3X12SD FF4X12SD FFSX12SD FFSX12SA
Please see table below for more adapter/port count options!

FX ECX Frame Options Part number example from configuration shown below: FFSX06SC

FF S X 06 SC
Port Count Connector
Fiber Type Family (Patch Side) (Patch Side)
1 OM1 X ECX 03 3 ports LD LC Duplex
3 OM3 06 6 ports LA LC Duplex APC
FX 4 OM4 08 8 ports SD SC Duplex
AOC S OS2 12 12 ports SC SC Simplex
16 16 ports SA SC Duplex APC
SB SC Simplex APC
ST ST

29
30
Our End-to-End Expertise.
Your End-to-End Solution.

Section Table of Contents

Fiber Cable Assemblies
n Fiber Cable Assemblies
FX@E LSZH Rated Assemblies 32–39
LSZH Patch Cords 32–33
LSZH Pigtail and Patch Cord Configurators 34–35
LSZH Trunk Assemblies 36–37
LSZH Trunk Assemblies Configurators 38–39
FX CMR/CMP Rated Assemblies 40–45
CMR/CMP Patch Cords 40–41
CMR/CMP Patch Cords and Cable Assemblies Configurators 42–43
CMR/CMP Trunk Assemblies 44–45
SFP+ Active Optical Cable/Transceiver 46–47

31
 LSZH Patch Cords
FiberExpress Pre-Terminated Assemblies – FX Patch Cords

Uncomplicated, robust, versatile and conveniently available. Superior quality and

performance FX patch cords deliver a robust design to withstand the rigours of daily use
in both off- the-shelf standard configurations and rapid custom tailored installations.

Faster
Faster delivery with off-the shelf availability of standard items
• 
FX MPO-12(f) Patch Cords, Assortment Faster identification of fiber type with Erika Violet for OM4 cables
• 

Easier
Easier installation in dense cable trays with small diameter cord options
• 
Easier ordering with simple intelligent SmartPart Numbers
• 
Easier polarity management with industry leading easy-to-use duplex clips
• 

Better
Better architectural flexibility with low-loss OM4 0.2 dB MPO and 0.15 dB LC connectors
• 
FX LC Duplex Patch Cords, Assortment
Better ruggedization with larger diameter cord options
• 
Better flexibility with multiple connector options including LC, SC, ST and MPO
• 

FX Patch Cords - Standard Performance

Description FX OM1 FX OM3 FX OM4 FX SM FX SM/APC
Cable Performance - LC/SC/ST
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.2 3.0/1.2 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
Fire Rating LC/SC/ST: LSZH
LC: Interconnect Duplex Zip 2 mm
Cable Style SC/ST/Hybrid: Interconnect Duplex Zip 3 mm
FX SC Duplex Patch Cords, Assortment
Connector Performance - LC/SC/ST
IL Max. (dB) 0.25 0.25 0.15 0.35 0.35
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 UPC - 55 APC - 65
Polarity A-TO-B / B-TO-A
Cable Performance - MPO
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
Fire Rating LSZH
Cable Style MPO-12: Interconnect Mini-Round 2 mm
Connector Performance - MPO
IL Max. (dB) 0.5 0.35 0.2 – 0.75
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 – APC - 60
FX ST Patch Cords, Assortment Polarity Type-B

32
Our End-to-End Expertise.
Your End-to-End Solution.

FX@E LSZH Patch Cords (Standard)

Length in M OM1 OM3 OM4 OS2 OS2/APC

LC Duplex to LC Duplex 2mm zipcord

2m - GP-32LDLD002M GP-42LDLD002M GP-S2LDLD002M GP-S2LALA002M
3m - GP-32LDLD003M GP-42LDLD003M GP-S2LDLD003M GP-S2LALA003M
5m - GP-32LDLD005M GP-42LDLD005M GP-S2LDLD005M GP-S2LALA005M
7m - GP-32LDLD007M GP-42LDLD007M GP-S2LDLD007M GP-S2LALA007M
SC Duplex to SC Duplex 2mm zipcord
2m GP-12SDSD002M GP-32SDSD002M GP-42SDSD002M GP-S2SDSD002M GP-S2SASA002M
3m GP-12SDSD003M GP-32SDSD003M GP-42SDSD003M GP-S2SDSD003M GP-S2SASA003M
5m GP-12SDSD005M GP-32SDSD005M GP-42SDSD005M GP-S2SDSD005M GP-S2SASA005M
7m GP-12SDSD007M GP-32SDSD007M GP-42SDSD007M GP-S2SDSD007M GP-S2SASA007M
ST to ST 2mm zipcord
2m GP-12STST002M GP-32STST002M GP-42STST002M GP-S2STST002M -
3m GP-12STST003M GP-32STST003M GP-42STST003M GP-S2STST003M -
Hybrid: LC Duplex to SC Duplex 2mm zipcord
2m GP-12LDSD002M GP-32LDSD002M GP-42LDSD002M GP-S2LDSD002M GP-S2LASA002M
3m GP-12LDSD003M GP-32LDSD003M GP-42LDSD003M GP-S2LDSD003M GP-S2LASA003M
Hybrid: SC Duplex to ST 2mm zipcord
2m GP-12SDST002M GP-32SDST002M - GP-S2SDST002M -
3m GP-12SDST003M GP-32SDST003M - GP-S2SDST003M -

FX@E LSZH MPO Patch Cords (Standard)

Length in M OM1 OM3 OM4 OS2 OS2/APC

MPO BASE-8 Female to MPO BASE-8 Female

5m - GP-374F4F005M GP-474F4F005M - GP-S74F4F005M
15m - GP-374F4F015M GP-474F4F015M - GP-S74F4F015M
30m - GP-374F4F030M GP-474F4F030M - GP-S74F4F030M
MPO BASE-12 Female to MPO BASE-12 Female
5m - GP-37MFMF005M GP-47MFMF005M - GP-S7MFMF005M
15m - GP-37MFMF015M GP-47MFMF015M - GP-S7MFMF015M
30m - GP-37MFMF030M GP-47MFMF030M - GP-S7MFMF030M

FX@E LSZH Hydra Patch Cords (Standard)

Length in M OM1 OM3 OM4 OS2 OS2/APC

MPO BASE-12 Female to LC Duplex (Fan-out 1.5m x In-line)

5m - GP-37MFLD005MA GP-47MFLD005MA - GP-S7MFLD005MA
15m - GP-37MFLD015MA GP-47MFLD015MA - GP-S7MFLD015MA
30m - GP-37MFLD030MA GP-47MFLD030MA - GP-S7MFLD030MA
SR4/PSM4: MPO BASE-8 Female to LC Duplex (Fan-out 1.5m x In-line)
5m - GP-374FLD005M4 GP-474FLD005M4 - GP-S74FLD005M4
15m - GP-374FLD015M4 GP-474FLD015M4 - GP-S74FLD015M4
30m - GP-374FLD030M4 GP-474FLD030M4 - GP-S74FLD030M4

33
 LSZH Pigtail and Patch Cord
Configurators
FX Pigtails

Established technology with a pedigree of resilience. Traditional fusion splice-on

connectors with pigtails provide factory-polished performance with field-termination
convenience within harsh environments.

Faster
Faster connector identification with color-coded pigtail kits
• 
Faster delivery with standard LC, SC or ST 2 meter pigtail kits
• 

Easier
Easier field-termination with factory pre-terminated connectors
• 
Easier ordering with intuitive SmartPart numbers
• 

Better
GT-S9LC001MR12,
FX LC Color-coded Pigtail Kit, Singlemode Better quality with precision factory-polished connectors
• 
Better insertion loss at 0.2 dB MPO-12 and 0.15 dB Max IL OM4
• 

Standard Performance
Description FX OM1 FX OM3 FX OM4 FX SM FX SM/APC
Cable Performance - LC/SC/ST
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.2 3.0/1.2 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
OFN (<= 3 m)
Fire Rating OFNP for Interconnect Ribbon 12-fiber (> 3 m)
OFNR for all other cables (> 3 m)
900 µm Color-coded fiber kit (6 or 12 colors from TIA-598), 900 µm single fiber
Cable Style OM1-Gray, OM3/OM4-Aqua, OS2-White, 250 µm Bare ribbon fiber, Interconnect
Simplex/Duplex, 2 mm/3 mm cords, Interconnect Ribbon 12-fiber cable
Standard Length 2 meters
Connector Performance - LC/SC/ST
IL Max. (dB) 0.25 0.25 0.15 0.35 0.35
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 UPC - 55 APC - 65

Description FX OM1 FX OM3 FX OM4 FX SM FX SM/APC

Cable Performance - MPO
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
Fire Rating OFN (<= 3 m), OFNP (> 3 m)
250 µm Bare ribbon fiber, Interconnect Ribbon 12-fiber cable, Interconnect
Cable Style
Mini-Round 2 mm
Standard Length 2 meters
Connector Performance - MPO
IL Max. (dB) 0.5 0.35 0.2 – 0.75
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 – APC - 60
The default fan-out is 0.5 m when there is a transition in a pigtail kit: 900 µm Color-coded fiber kit or 250 µm Bare Ribbon fiber (R06 or R12).

34
 Our End-to-End Expertise.
Your End-to-End Solution.

FX@E LSZH MPO Patch Cords

MPO Patch cords Fiber Cable Type Connector 1 Connector 2 Length in M Polarity
GP- 3 7 MF MF 003M A
3 OM3 7 3mm Round Cord 4 M MPO Base-8 (M) 4 M MPO Base-8 (M) 005M to 100M A Type-A
4 OM4 4 F MPO Base-8 (F) 4 F MPO Base-8 (F) *use M as decimal 4 SR4/PSM4
S OS2 M M MPO Base-12 (M) M M MPO Base-12 (M) ONLY USED IF APPLICABLE
M F MPO Base-12 (F) M F MPO Base-12 (F) FOR NON-STANDARD

FX@E LSZH Hydra Patch Cords

Hydra Fiber Cable Type Connector 1 Connector 2 Length in M Polarity
GP- 3 7 MM LD 003M A
3 OM3 7 3mm Round Cord 4 M MPO Base-8 (M) L D LC Duplex 005M to 100M A Type-A
4 OM4 9 900u 4 F MPO Base-8 (F) L C LC Simplex *use M as decimal 4 SR4/PSM4
Standard Mass Fusion Pigtail Kits

Standard Mass Fusion Pigtail Kits

S OS2 M M MPO Base-12 (M) L A LC/APC Duplex ONLY USED IF APPLICABLE
M F MPO Base-12 (F) L B LC/APC Simplex Pigtail Assembly Length (≤3 m)
FOR NON-STANDARD
S D SC Duplex Pigtail Assembly Length (≤3 m)
0.5 m (19.7") Fanout Length
S C SC Simplex 0.5 m (19.7") Fanout Length Ribbon Length
S A SC/APC Duplex Ribbon Length
Connector 1 Conne
S B SC/APC Simplex Connector 1 Conne
Connector 2 Conne
Connector 2 Conne

FX@E LSZH Patch Cords Connector 3

Connector 3
Conne
Conne
Connector 4 Conne
Patch cords Fiber Cable Type Connector 1 Connector 2 Connector
4
Connector 5
Length in M Polarity Conne
Conne

GP- 3 2 LD LD 003M X
Connector
5 Conne
Connector 6 Conne
Connector
6 Conne
1 OM1 2 2mm Duplex Zip Cord L D LC Duplex L D LC Duplex Connector 7 005M to 100M X A/B (Cross)
Transion
Transion Conne
Connector
7 Conne
3 OM3 3 3mm Duplex Zip Cord L C LC Simplex L C LC Simplex Connector 8 *use M as decimal S A/A (Straight)
12-fiber Ribbon Conne
Connector 8 12-fiber Ribbon Conne
4 OM4 4 2mm Simplex Cord L A LC/APC Duplex L A LC/APC Duplex Connector 9 ONLY (250
USEDµmIF
(250 µm APPLICABLE
Ribbon
Ribbon
Fiber)
Fiber) Conne
Connector 9 Conne
S OS2 5 3mm Simplex Cord L B LC/APC Simplex L B LC/APC Simplex Connector 10 FOR NON-STANDARD Connec
Connector 10 Connec
S D SC Duplex S D SC Duplex Connector 11 Connec
Connector 11 Connec
S C SC Simplex S C SC Simplex Connector 12 Connec
Connector 12 Connec
S A SC/APC Duplex S A SC/APC Duplex 900 µmµm
Legs
900 Legs
S B SC/APC Simplex S B SC/APC Simplex
Standard Mass Fusion Pigtail Kits Mass Fusion Pigtail Kits
Standard
F C FC F
Long Mass Fusion Pigtail Kits C FC
Long Mass Fusion Pigtail Kits

F A FC/APC F A FC/APC Pigtail Assembly Length

Pigtail Assembly Length(≤3
(≤3m)
m)
S T ST S T ST
Pigtail Assembly Length
Pigtail (≤3 m) Length (≤3 m)
Assembly Long Pigtail Assembly Length
Long Pigtail (≥4 m) Length (≥4 m)
Assembly

FX@E LSZH
0.5 m (19.7") Fanout
Pigtails
Length Fanout Length
0.5 m (19.7") 0.5 m (19.7") Fanout Length Fanout Length
0.5 m (19.7") 1
2
1
2
3
Ribbon Length Ribbon Length Ribbon Length Ribbon Length
3

Pigtails Fiber Cable Type Connector Length in M Packaging

PULL

4
PULL

4
5 5
6 6
7 7
8 8
9 9
10 10
Connector 1 Connector 1 Connector 1 Connector 1
9
11

GT- 3 LC 001M R12

11
12 12

12-fiberRibbon
12-fiber Ribbon
Connector 2 Connector 2 Connector 2 Connector 2
1 OM1 9 900u L D LC Duplex 005M to 009M S01 Single Pack (for (250 900u
(250µm
MPO
µmRibbon
only)
RibbonFiber)
Fiber)
Connector 3 Connector 3 Connector 3 Connector 3
3 OM3 2 2mm Duplex Zip Cord L C LC Simplex *use M as decimal B12 12 Pack 900u
Connector 4 Connector 4 Connector 4 Connector 4
4 OM4 4 2mm Simplex Cord L A LC/APC Duplex R12 Rainbow 12
Pigtail
Pigtail
PackLength
Assembly
Assembly
(900u)
Length(≤3
(≤3m)
m)
Connector 5 Connector 5 Connector 5 Connector 5
S OS2 L B LC/APC Simplex S1 Single Pack only for Jacketed pigtails
Connector 6 Connector 6 Connector 6 Connector 6
Transion Transion S D SC Duplex Transion Transion
Connector 7 Connector 7 Connector 7 Connector 7
S C SC Simplex Connector 1 Conne
Connector 8 Connector 8 12-fiber Ribbon12-fiber Ribbon Connector 8 Connector 8 12-fiber Jacketed Ribbon
12-fiber Jacketed Ribbon
Connector 1 Conne
(250 µm Ribbon Fiber)
(250 µm Ribbon Fiber) S A SC/APC Duplex (250 µm Ribbon Fiber)
(250 µm Ribbon Fiber)Connector 2 Conne
Connector 9 Connector 9 Connector 9 Connector 9
S B SC/APC Simplex Connector 2
Connector 3
Conne
Conne
Connector 10 Connector 10 Connector 10 Connector 10
F C FC Connector 3
Connector 4
Conne
Conne
Connector 11 Connector 11 Connector 11 Connector 11
F A FC/APC Connector 4
Connector 5
Conne
Conne
Connector 12 Connector 12 Connector 12 Connector 12
S T ST Connector 5
Connector 6
Conne
Conne
900 µm Legs 900 µm Legs 900 µm Legs 900 µm Legs
4 M MPO Base-8 (M) Connector 6
Connector 7
Conne
Conne
4 F MPO Base-8 (F) Connector 7
Connector 8
Conne
Conne
M M MPO Base-12 (M) Connector 8
Connector 9
Conne
Conne
Pigtail Assembly Length (≤3 m) Length (≤3 m)
Pigtail Assembly
M F MPO Base-12Long (F)Pigtail Assembly Length
Long Pigtail (≥4 m) Length (≥4 m)
Assembly Connector 9
Connector 10
Conne
Connec
N M MPO Base-24 (M) Connector 10
Connector 11
Connec
Connec

1 1
N F MPO Base-24 (F) 1 1
Connector 11
Connector 12
Connec
Connec
2 2 2 2
3 3 3 3
Connector 12 Connec
PULL

PULL

4 4
PULL

PULL

4 4
5 5 5 5
6
7
8
6
7
8
6
7
8
6
7
8
900 µm Legs
900 µm Legs
9 9 9 9
10 10 10 10
11 11 11 11
12 12 12 12

12-fiber Ribbon12-fiber Ribbon 12-fiber Jacketed Ribbon

12-fiber Jacketed Ribbon
(250 µm Ribbon Fiber)
(250 µm Ribbon Fiber) (250 µm Ribbon Fiber)
(250 µm Ribbon Fiber)
Pigtail Kits Single Pigtails
Pigtail Assembly Length
Pigtail Assembly Length
Pigtail Assembly Length
Pigtail (≤3 m) Length (≤3 m)
Assembly Long Pigtail Assembly Length
Long Pigtail (≥4 m) Length (≥4 m)
Assembly

0.5 m (19.7") Fanout Length Fanout Length

0.5 m (19.7") Connector 1
Jacketed Length
Jacketed Length
Connector 1 Simplex Connector
Types 900 µm Tight Buffered Fiber
Connector 1 Connector 1 Connector 1 Connector 1 Simplex Connector
Types 900 µm Tight Buffered Fiber
Connector 2 Connector 2 Connector 2 Connector 2

Connector 3 Connector 3 Connector 3 Connector 3 Connector 1

Connector 1 Simplex Connector Simplex Zip Interconnect Cable 2 mm/3 mm

Connector 4 Connector 4 Connector 4 Connector 4 Types
(900 µm Tight Buffered Fiber)
Simplex Connector Simplex Zip Interconnect Cable 2 mm/3 mm
Connector 5 Connector 5 Connector 5 Connector 5 Types
(900 µm Tight Buffered Fiber)
Connector 6 Connector 6 Connector 6 Connector 6 Connector 1
A

Transion Transion
Connector 7 Connector 7 Connector 7 Connector 7 Connector
Connector 1 2
A
B

Duplex Connector Duplex Zip Interconnect Cable 2 mm/3 mm

Connector 8 Connector 8 Connector 8 Connector 8 12-fiber Distribuon
12-fiber Distribuon Connector
Cable Cable 2
B

Types
(900 µm Tight Buffered
(900 µm Fiber)
Tight Buffered Fiber) (900 µm Tight Buffered Fiber)
Connector 9 Connector 9 Connector 9 Connector 9 Duplex Connector Duplex Zip Interconnect Cable 2 mm/3 mm
Types
Connector 10 Connector 10 Connector 10 Connector 10 1
(900 µm Tight Buffered Fiber)
2
3
PULL

4
5

Connector 11 Connector 11 Connector 11 Connector 11 Connector 1 1

6
7
8
2 9
3 10
11
PULL

4
5 12
Connector 12 Connector 12 Connector 12 Connector 12 Connector 1 6

MPO Connector
7
8
9
10
12-fiber uMini-Distribuon Cable
900 µm Legs 900 µm Legs 900 µm Legs 900 µm Legs Types
11
12 (250 µm Loose Fiber)
MPO Connector
12-fiber uMini-Distribuon Cable
Types (250 µm Loose Fiber)
Please contact Belden for any help configuring/validating SmartPart Numbers or for any other custom Engineered solutions
Pigtail Assembly Length
Pigtail Assembly Length

35
Connector 1 Connector 1

Simplex Connector Simplex Connector

Types Types 900 µm Tight Buffered
900 µm Fiber
Tight Buffered Fiber
 LSZH Trunk Assemblies
FX MPO Trunk Assemblies

Innovative performance with ingrained simplicity. Industry-leading low-loss MPO Trunks

are the foundation of Easier, Faster and Better pre-terminated fiber connectivity solutions
revolutionizing the data center.

Faster
• Faster identification of fiber type with Erika Violet for OM4 Cable, Connectors and Adapters
• Faster installation with pre-terminated solutions

Easier
• Easier installation with 3-flange real and default pulling eye
FX MPO
Trunk, OM4, • Easier ordering with simple intelligent SmartPart Numbers
MPO-12 (Male to Male), • Easier upgradability to 40G and 100G with MPO pre-term solutions
Type-B, 1 x MPO-12 (12 fibers), 10 m, Mini-Distribution
4.8 mm (Double-Jacket), Erika Violet Jacket

Better
• Better architectural flexibility with high-performance 0.2 dB OM4 MPO connectors
• Better quality through exhaustive design validation against TIA standards
• Better contamination control with Data Center ready packaging

FX MPO Trunk Assemblies - Standard Performance

Description FX OM1 FX OM3 FX OM4 FX SM
Cable Performance
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.35/0.25
Fire Rating Plenum
Cable Style uMini-Distributon and Mini-Distribution cables
Connector Performance - MPO-12
IL Max. (dB) 0.5 0.35 0.2 0.75
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 APC - 60
FX MPO Fanout Length 0.5 m, In-Line
Trunk, OM3,
Connector Performance - MPO-24
MPO-12 (Male to Male),
Type-B, 1 x MPO-12 (12 fibers), 10 m, Mini-Distribution IL Max. (dB) 0.5 0.35 0.35 0.75
4.8 mm (Double-Jacket), Aqua Jacket Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 APC - 60

36
Our End-to-End Expertise.
Your End-to-End Solution.

FX@E LSZH Multi-fiber Assemblies

Length in M OM1 OM3 OM4 OS2 OS2/APC

LC Duplex to LC Duplex 2mm zipcord

10m - G-3LLDLD010M G-4LLDLD010M G-SLLDLD010M G-SLLALA010M
15m - G-3LLDLD015M G-4LLDLD015M G-SLLDLD015M G-SLLALA015M
20m - G-3LLDLD020M G-4LLDLD020M G-SLLDLD020M G-SLLALA020M
30m - G-3LLDLD030M G-4LLDLD030M G-SLLDLD030M G-SLLALA030M
SC Duplex to SC Duplex 2mm zipcord
10m G-1LSDSD010M G-3LSDSD010M G-4LSDSD010M G-SLSDSD010M G-SLSASA010M
15m G-1LSDSD015M G-3LSDSD015M G-4LSDSD015M G-SLSDSD015M G-SLSASA015M
20m G-1LSDSD020M G-3LSDSD020M G-4LSDSD020M G-SLSDSD020M G-SLSASA020M
30m G-1LSDSD030M G-3LSDSD030M G-4LSDSD030M G-SLSDSD030M G-SLSASA030M
Hybrid: LC Duplex to SC Duplex 2mm zipcord
10m G-1LLDSD010M G-3LLDSD010M G-4LLDSD010M G-SLLDSD010M G-SLLASA010M
15m G-1LLDSD015M G-3LLDSD015M G-4LLDSD015M G-SLLDSD015M G-SLLASA015M

FX@E LSZH MPO Trunk Cables

Length in M OM1 OM3 OM4 OS2 OS2/APC

MPO BASE-8 Female to MPO BASE-8 Female

10m - G-3L4F4F010MB G-4L4F4F010MB - G-SL4F4F010MB
20m - G-3L4F4F020MB G-4L4F4F020MB - G-SL4F4F020MB
30m - G-3L4F4F030MB G-4L4F4F030MB - G-SL4F4F030MB
MPO BASE-12 Female to MPO BASE-12 Female
10m - G-3LMFMF010MB G-4LMFMF010MB - G-SLMFMF010MB
20m - G-3LMFMF020MB G-4LMFMF020MB - G-SLMFMF020MB
30m - G-3LMFMF030MB G-4LMFMF030MB - G-SLMFMF030MB

FX@E LSZH Hydra Trunk Cables

Length in M OM1 OM3 OM4 OS2 OS2/APC

MPO BASE-12 Female to LC Duplex (Fan-out 0.5m x In-line)

5m - G-3LMFLD010MB G-4LMFLD010MB - G-SLMFLA010MB
15m - G-3LMFLD020MB G-4LMFLD020MB - G-SLMFLA020MB
30m - G-3LMFLD030MB G-4LMFLD030MB - G-SLMFLA030MB
SR4/PSM4: MPO BASE-8 Female to LC Duplex (Fan-out 0.5m x In-line)
5m - G-3L4FLD010MB G-4L4FLD010MB - G-SL4FLA010MB
15m - G-3L4FLD020MB G-4L4FLD020MB - G-SL4FLA020MB
30m - G-3L4FLD030MB G-4L4FLD030MB - G-SL4FLA030MB

37
 LSZH Trunk Assemblies Configurators
FX Multi-Fiber Cable Assemblies

Superior consistent craftsmanship culminating in near instantaneous installation. Highly

configurable multi-fiber pre-terminated cable assemblies are engineering for maximum
performance and crafted ensuring superior quality.

Length
Inside End Outside End
Fan-Out In-Line Fan-Out Staggered

FX Multi-Fiber
Cable Assembly

Pulling Eye Diameter

Description 12-Fiber 24-Fiber 36-Fiber 48-Fiber 72-Fiber 96-Fiber 144-Fiber
Installation Diameter -
1 2 3 4 6 8 12
MPO-12 (Total Connectors)
1 Connector per Bundle, 8 cm Bundle Stagger 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm
2 Connectors per Bundle, 8 cm Bundle Stagger 25.4 mm 25.4 mm 25.4 mm 25.4 mm
3 Connectors per Bundle, 8 cm Bundle Stagger 30.0 mm 30.0 mm 30.0 mm
4 Connectors per Bundle, 8 cm Bundle Stagger 31.7 mm 31.7 mm
6 Connectors per Bundle, 8 cm Bundle Stagger 38.1 mm
One Bundle, No Stagger (in-line) 19.5 mm 25.4 mm 30.0 mm 31.7 mm 38.1 mm 41.9 mm 50.8 mm

Standard FX MPO Trunks 12F (Indoor) have

a more robust cable construction using a Mini-
Distribution cable (Double jacket 4.8 mm).
They are designed for safe pulling, and to with-
stand the rigors of installation while providing
sufficient support (wire basket support).

38
Our End-to-End Expertise.
Your End-to-End Solution.

FX@E LSZH MPO Trunk Cable Assemblies

MPO Trunks Fiber Cable Type Connector 1 Connector 2 Length in M Polarity Fiber Count Fan-Out Geometry
G- 3 L MF MF 005M A B 1
3 OM3 L LSZH 4 M MPO Base-8 (M) 4 M MPO Base-8 (M) 005M to 500M A Type-A C 24 Fiber D 0.5m x In-line
4 OM4 C CPR C Class LSZH 4 F MPO Base-8 (F) 4 F MPO Base-8 (F) B Type-B F 48 Fiber E 1.0m x In-line
S OS2 I I/O LSZH All Dielectric M M MPO Base-12 (M) M M MPO Base-12 (M) C Type-C I 72 Fiber F 1.5m x In-line
O Outdoor All Dielectric M F MPO Base-12 (F) M F MPO Base-12 (F) 4 SR4/PSM4 J 96 Fiber G 2.0m x In-line
R Outdoor Armored K 144 Fiber 1 0.5m x Staggered 80mm - 1 conn.
2 0.5m x Staggered 80mm - 2 conn.
3 0.5m x Staggered 80mm - 3 conn.
4 0.5m x Staggered 80mm - 4 conn.
6 0.5m x Staggered 80mm - 6 conn.
ONLY USED for HIGH FIBER COUNT

FX@E LSZH Hydra Trunk Cable Assemblies

Hydra Trunks Fiber Cable Type Connector 1 Connector 2 Length in M Polarity Fiber Count Fan-Out Geometry
G- 4 2 MF LD 005M 4 B E
3 OM3 L LSZH 4 M MPO Base-8 (M) L D LC Duplex 005M to 500M A Type-A C 24 Fiber D 0.5m x In-line
4 OM4 C CPR C Class LSZH 4 F MPO Base-8 (F) L C LC Simplex 4 SR4/PSM4 F 48 Fiber E 1.0m x In-line
S OS2 M M MPO Base-12 (M) L A LC/APC Duplex F 1.5m x In-line
M F MPO Base-12 (F) L B LC/APC Simplex G 2.0m x In-line
S D SC Duplex ONLY USED for HIGH FIBER COUNT
S C SC Simplex
S A SC/APC Duplex
S B SC/APC Simplex

FX@E LSZH Multi-fiber Trunk Cable Assemblies

Multi-fiber Fiber Cable Type Connector 1 Connector 2 Length in M Polarity Fiber Count Fan-Out Geometry
Trunks
G- S D LD LD 005M X A E
3 OM3 L LSZH L D LC Duplex L D LC Duplex 005M to 500M X A/B (Cross) 1 1 Fiber D 0.5m x In-line
4 OM4 C CPR C Class LSZH L C LC Simplex L C LC Simplex S A/A (Straight) 2 2 Fiber E 1.0m x In-line
S OS2 I I/O LSZH All Dielectric L A LC/APC Duplex L A LC/APC Duplex A 12 Fiber F 1.5m x In-line
O Outdoor All Dielectric L B LC/APC Simplex L B LC/APC Simplex C 24 Fiber G 2.0m x In-line
R Outdoor Armored S D SC Duplex S D SC Duplex F 48 Fiber
S C SC Simplex S C SC Simplex ONLY USED for HIGH FIBER COUNT
S A SC/APC Duplex S A SC/APC Duplex
S B SC/APC Simplex S B SC/APC Simplex

39
 CMR/CMP Patch Cords
FiberExpress Pre-Terminated Assemblies – FX Patch Cords

Uncomplicated, robust, versatile and conveniently available. Superior quality and

performance FX patch cords deliver a robust design to withstand the rigours of daily use
in both off- the-shelf standard configurations and rapid custom tailored installations.

Faster
Faster delivery with off-the shelf availability of standard items
• 
FX MPO-12(f) Patch Cords, Assortment Faster identification of fiber type with Erika Violet for OM4 cable and connectors
• 

Easier
Easier installation in dense cable trays with small diameter cord options
• 
Easier ordering with simple intelligent SmartPart Numbers
• 
Easier polarity management with industry leading easy-to-use duplex clips
• 

Better
Better architectural flexibility with low-loss OM4 0.2 dB MPO and 0.15 dB LC connectors
• 
FX LC Duplex Patch Cords, Assortment Better ruggedization with larger diameter cord options
• 
Better flexibility with multiple connector options including LC, SC, ST and MPO
• 
Better quality through exhaustive design validation against TIA standards
• 

FX Patch Cords - Standard Performance

Description FX OM1 FX OM3 FX OM4 FX SM FX SM/APC
FX LC Duplex UHD Uniboot Patch Cords, Assortment
Cable Performance - LC/SC/ST
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.2 3.0/1.2 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
Fire Rating LC/SC/ST: Riser
LC: Interconnect Duplex Zip 2 mm
Cable Style LC Uniboot: Interconnect Mini-Round 2 mm
SC/ST/Hybrid: Interconnect Duplex Zip 3 mm
Connector Performance - LC/SC/ST
IL Max. (dB) 0.25 0.25 0.15 0.35 0.35
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 UPC - 55 APC - 65
Polarity A-TO-B / B-TO-A
Cable Performance - MPO
FX SC Duplex Patch Cords, Assortment IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.5/0.5
Fire Rating Plenum
Cable Style MPO-12: Interconnect Mini-Round 2 mm
Connector Performance - MPO
IL Max. (dB) 0.5 0.35 0.2 – 0.75
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 – APC - 60
Polarity Type-B

FX ST Patch Cords, Assortment

40
Our End-to-End Expertise.
Your End-to-End Solution.

FX Accessory Duplex Clips

Belden Part Number
Description OM1 OM3 OM4 OS2 OS2
Beige Aqua Erika Violet Blue Green
LC Duplex FXFACLLDB25T FXFACLLDB25A FXFACLLDB25E FXFACLLDB25B FXFACLLDB25G
Mini-LC Duplex FXFACLLMB25N (Black)

Standard FX Patch Cords

OM1 OM3 OM4 OS2 OS2/APC
Length (m) Beige/Orange Aqua Erika Violet Blue/Yellow Green/Yellow
MPO-12(8f) Female to MPO-12(8f) Female - Base8
2 – FP34F4F002M FP44F4F002M – FPS4F4F002M
3 – FP34F4F003M FP44F4F003M – FPS4F4F003M
5 – FP34F4F005M FP44F4F005M – FPS4F4F005M
MPO-12(12f) Female to MPO-12(12f) Female - Base12
2 – FP3MFMF002M FP4MFMF002M – FPSMFMF002M
3 – FP3MFMF003M FP4MFMF003M – FPSMFMF003M
5 – FP3MFMF005M FP4MFMF005M – FPSMFMF005M
MPO-24 Female to MPO-24 Female
2 – FP3NFNF002M FP4NFNF002M – FPSNFNF002M
3 – FP3NFNF003M FP4NFNF003M – FPSNFNF003M
5 – FP3NFNF005M FP4NFNF005M – FPSNFNF005M
LC Duplex UHD Uniboot to LC Duplex UHD Uniboot
2 – FP3LULU002M FP4LULU002M FPSLULU002M –
3 – FP3LULU003M FP4LULU003M FPSLULU003M –
5 – FP3LULU005M FP4LULU005M FPSLULU005M –
LC Duplex to LC Duplex
2 FP1LDLD002M FP3LDLD002M FP4LDLD002M FPSLDLD002M FPSLALA002M
3 FP1LDLD003M FP3LDLD003M FP4LDLD003M FPSLDLD003M FPSLALA003M
5 FP1LDLD005M FP3LDLD005M FP4LDLD005M FPSLDLD005M FPSLALA005M
SC Duplex to SC Duplex
2 FP1SDSD002M FP3SDSD002M FP4SDSD002M FPSSDSD002M FPSSASA002M
3 FP1SDSD003M FP3SDSD003M FP4SDSD003M FPSSDSD003M FPSSASA003M
5 FP1SDSD005M FP3SDSD005M FP4SDSD005M FPSSDSD005M FPSSASA005M
ST to ST (Duplex Cord)
2 FP1STST002M FP3STST002M FP4STST002M FPSSTST002M –
3 FP1STST003M FP3STST003M FP4STST003M FPSSTST003M –
5 FP1STST005M FP3STST005M FP4STST005M FPSSTST005M –
Hybrid: LC Duplex to SC Duplex
2 FP1LDSD002M FP3LDSD002M FP4LDSD002M FPSLDSD002M FPSLASA002M
3 FP1LDSD003M FP3LDSD003M FP4LDSD003M FPSLDSD003M FPSLASA003M
5 FP1LDSD005M FP3LDSD005M FP4LDSD005M FPSLDSD005M FPSLASA005M
Hybrid: SC Duplex to ST
2 FP1LDST002M FP3LDST002M – FPSLDST002M –
3 FP1LDST003M FP3LDST003M – FPSLDST003M –
5 FP1LDST005M FP3LDST005M – FPSLDST005M –
LC Simplex UHD to LC Simplex UHD, Simplex cord
2 – – – FPSLILI002M FPSLFLF002M
3 – – – FPSLILI003M FPSLFLF003M
5 – – – FPSLILI005M FPSLFLF005M

41
 CMR/CMP Patch Cords and
Cable Assemblies Configurators
FX Hydra Patch Cords

Uniquely suited within dense fixed environments. Compact alternative for statically
FP4LUMF002M, FX Hydra Patch Cord, configured patch cords and pre-term cassettes eliminates connection points to improve
OM4, MPO-12F (F) to 6 x LC Duplex performance and alleviate space constraints.
UHD Uniboot, 2 m

Faster
Faster deployment at the switch with MPO to LC fanout construction
• 

Easier
Easier upgradability from 10G to 40G or 100G with MPO connectivity
• 

Better
Better identification of fiber type with Erika Violet for OM4 cable and connectors
• 
Better airflow with small transition point construction
• 

FP4LDMF002M, FX Hydra Patch Cord,

OM4, MPO-12F (F) to 6 x LC Duplex, 2 m
FX Hydra Assemblies - Standard Performance
Description FX OM3 FX OM4 FX SM FX SM/APC
Cable Performance - LC/SC/ST
IL Max. 850 nm/1300 nm (dB/Km) 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – 0.5/0.5
Fire Rating Plenum
MPO: Interconnect Mini-Round 3.0 mm
Cable Style LC Uniboot: Interconnect Mini-Round 2.0 mm
LC: Interconnect Simplex Zip 2.0 mm
Connector Performance - LC
IL Max. (dB) 0.25 0.15 0.35 0.35
Polish - RL Typ. (dB) PC - 30 PC - 30 UPC - 55 APC - 65
Fanout Length 0.5 m, In-Line
Connector Performance - MPO
FP3LDMF002M, FX Hydra Patch Cord, IL Max. (dB) 0.35 0.2 – 0.75
OM3, MPO-12F (F) to 6 x LC Duplex, 2 m Polish - RL Typ. (dB) PC - 30 PC - 30 – APC - 60
Polarity Type-A
See duplex clips on page 18

Standard FX Hydra Assemblies

OM3 OM4 OS2
Description
PULL Aqua Erika Violet Blue/Yellow
Base12 Duplex
12
11
10
9
8
7
6
5
4
3
2
1

MPO-12(12f) Female to 6 x LC Duplex UHD Uniboot,

0.5 m In-Line Fanout, 2 m in length FP3LUMF002M FP4LUMF002M FPSLUMF002M

MPO-12(12f) Female to 6 x LC Duplex UHD Uniboot,

A B A B A B A B A B A B 0.5 m In-Line Fanout, 3 m in length FP3LUMF003M FP4LUMF003M FPSLUMF003M

MPO-12(12f) Female to 6 x LC Duplex UHD Uniboot,

0.5 m In-Line Fanout, 5 m in length FP3LUMF005M FP4LUMF005M FPSLUMF005M
FX Hydra Assembly SR4 FX Hydra Assembly Type
Base8 Duplex for SR4 (QSFP+/QSFP28) Transceivers
Polarity MPO-12 8 Fiber A Polarity MPO-12 12 Fiber
(Base8) (Base12) MPO-12(8f) Female to 4 x LC Duplex UHD Uniboot,
0.5 m In-Line Fanout, 2 m in length FP3LU4F002M FP4LU4F002M FPSLU4F002M

MPO-12(8f) Female to 4 x LC Duplex UHD Uniboot,

0.5 m In-Line Fanout, 3 m in length FP3LU4F003M FP4LU4F003M FPSLU4F003M

MPO-12(8f) Female to 4 x LC Duplex UHD Uniboot,

0.5 m In-Line Fanout, 5 m in length FP3LU4F005M FP4LU4F005M FPSLU4F005M

42
Our End-to-End Expertise.
Your End-to-End Solution.

FX CMP/R MPO Patch Cords

MPO cords Fiber Connector 1 Connector 2 Length in M Fire Rating Cable Type Polarity
FP 3 MF MF 005M R 7 A
3 OM3 M M MPO Base-12 (M) M M MPO Base-12 (M) 005M to 100M R Riser 7 3mm Round Cord A Type-A
4 OM4 M F MPO Base-12 (F) M F MPO Base-12 (F) P Plenum 4 SR4/PSM4
S OS2 4 M MPO Base-8 (M) 4 M MPO Base-8 (M)
4 F MPO Base-8 (F) 4 F MPO Base-8 (F)

FX CMP/R Hydra Assemblies

Hydra cords Fiber Connector 1 Connector 2 Length in M Fire Rating Cable Type Polarity
FP 3 LD MM 005M R 7 A
1 OM1 L D LC Duplex M M MPO Base-12 (M) 005M to 100M R Riser 7 3mm Round Cord A Type-A
3 OM3 L C LC Simplex M F MPO Base-12 (F) P Plenum 4 SR4/PSM4
4 OM4 L A LC/APC Duplex 4 M MPO Base-8 (M)
S OS2 L B LC/APC Simplex 4 F MPO Base-8 (F)
S D SC Duplex
S C SC Simplex
S A SC/APC Duplex
S B SC/APC Simplex

FX CMP/R Patch Cords

Patch cords Fiber Connector 1 Connector 2 Length in M Fire Rating Cable Type Polarity
FP 3 LD LD 003M R 2 X
1 OM1 L D LC Duplex L D LC Duplex 005M to 100M R Riser 2 2mm Duplex Zip Cord X A/B (Cross)
3 OM3 L C LC Simplex L C LC Simplex P Plenum 3 3mm Duplex Zip Cord S A/A (Straight)
4 OM4 L A LC/APC Duplex L A LC/APC Duplex 4 2mm Simplex Cord
S OS2 L B LC/APC Simplex L B LC/APC Simplex 5 3mm Simplex Cord
S D SC Duplex S D SC Duplex
S C SC Simplex S C SC Simplex
S A SC/APC Duplex S A SC/APC Duplex
S B SC/APC Simplex S B SC/APC Simplex
F C FC F C FC
F A FC/APC F A FC/APC
S 2 ST2 S 2 ST2
S T ST S T ST

FX CMP/R Pigtails
Pigtail cords Fiber Connector Cable type Product Family Packaging Length in M
FT 3 LC 900 P R12 2M
1 OM1 L D LC Duplex 250 250u P Fusion pigtail S01 Single Pack (for MPO only) 1M to 9M
3 OM3 L C LC Simplex 900 900u R12 Rainbow 12 Pack
4 OM4 L A LC/APC Duplex 2MM 2mm Simplex Cord
S OS2 L B LC/APC Simplex 3MM 3mm Simplex Cord
S D SC Duplex
S C SC Simplex
S A SC/APC Duplex
S B SC/APC Simplex
F C FC
F A FC/APC
S T ST
M M MPO Base-12 (M)
M F MPO Base-12 (F)

43
 CMR/CMP Trunk Assemblies
FX MPO Trunk Assemblies

Innovative performance with ingrained simplicity. Industry-leading low-loss MPO Trunks

are the foundation of Easier, Faster and Better pre-terminated fiber connectivity solutions
revolutionizing the data center.

Faster
• Faster identification of fiber type with Erika Violet for OM4 Cable, Connectors and Adapters
• Faster installation with pre-terminated solutions

Easier
• Easier installation with 3-flange real and default pulling eye
FX MPO
Trunk, OM4, • Easier ordering with simple intelligent SmartPart Numbers
MPO-12 (Male to Male), • Easier upgradability to 40G and 100G with MPO pre-term solutions
Type-B, 1 x MPO-12 (12 fibers), 10 m, Mini-Distribution
4.8 mm (Double-Jacket), Erika Violet Jacket

Better
• Better architectural flexibility with high-performance 0.2 dB OM4 MPO connectors
• Better quality through exhaustive design validation against TIA standards
• Better contamination control with Data Center ready packaging

FX MPO Trunk Assemblies - Standard Performance

Description FX OM1 FX OM3 FX OM4 FX SM
Cable Performance
IL Max. 850 nm/1300 nm (dB/Km) 3.5/1.2 3.25/1.0 3.0/1.0 –
IL Max. 1310 nm/1550 nm (dB/Km) – – – 0.35/0.25
Fire Rating Plenum
Cable Style uMini-Distributon and Mini-Distribution cables
FX MPO
Trunk, OM3, Connector Performance - MPO-12
MPO-12 (Male to Male), IL Max. (dB) 0.5 0.35 0.2 0.75
Type-B, 1 x MPO-12 (12 fibers), 10 m, Mini-Distribution Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 APC - 60
4.8 mm (Double-Jacket), Aqua Jacket Fanout Length 0.5 m, In-Line
Connector Performance - MPO-24
IL Max. (dB) 0.5 0.35 0.35 0.75
Polish - RL Typ. (dB) PC - 30 PC - 30 PC - 30 APC - 60

44
Our End-to-End Expertise.
Your End-to-End Solution.

Pulling Eye Diameter

Description 12-Fiber 24-Fiber 36-Fiber 48-Fiber 72-Fiber 96-Fiber 144-Fiber
Installation Diameter -
1 2 3 4 6 8 12
MPO-12 (Total Connectors)
1 Connector per Bundle, 8 cm Bundle Stagger 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm
2 Connectors per Bundle, 8 cm Bundle Stagger 25.4 mm 25.4 mm 25.4 mm 25.4 mm
3 Connectors per Bundle, 8 cm Bundle Stagger 30.0 mm 30.0 mm 30.0 mm
4 Connectors per Bundle, 8 cm Bundle Stagger 31.7 mm 31.7 mm
6 Connectors per Bundle, 8 cm Bundle Stagger 38.1 mm
One Bundle, No Stagger (in-line) 19.5 mm 25.4 mm 30.0 mm 31.7 mm 38.1 mm 41.9 mm 50.8 mm

Standard FX MPO Trunks 12F (Indoor) have

a more robust cable construction using a Mini-
Distribution cable (Double jacket 4.8 mm).
They are designed for safe pulling, and to with-
stand the rigors of installation while providing
sufficient support (wire basket support).

FX CMR MPO Trunk Cables

Length in M OM1 OM3 OM4 OS2 OS2/APC

MPO BASE-12 Female to MPO BASE-12 Female

10m - FM3MFB1010M FM4MFB1010M - FMSMFB1010M
20m - FM3MFB1020M FM4MFB1020M - FMSMFB1020M
30m - FM3MFB1030M FM4MFB1030M - FMSMFB1030M
MPO BASE-12 (8f) Female to MPO BASE-12 (8f) Female
10m - FM34FB1010M FM44FB1010M - FMS4FB1010M
20m - FM34FB1020M FM44FB1020M - FMS4FB1020M
30m - FM34FB1030M FM44FB1030M - FMS4FB1030M

FX CMR/P MPO Trunk Cable Assemblies

MPO Trunks Fiber Connector Gender Polarity Fiber Count Length in M Fire Rating Cable Type Fan-Out Geometry
FM 4 M F B 2 005M P M 1
3 OM3 4 MPO Base-8 M Male to Male A Type-A 1 12 Fiber 005M to 100M R Riser M Mini-Distribution 3.0mm D 0.5 m x In-line
4 OM4 M MPO Base-12 F Female to Female B Type-B 2 24 Fiber P Plenum E 1.0 m x In-line
S OS2 E Male to Female 3 36 Fiber F 1.5 m x In-line
P Male to Open 4 48 Fiber G 2.0 m x In-line
R Female to Open 6 72 Fiber 1 0.5 m x Staggered 80 mm - 1 conn.
8 96 Fiber 2 0.5 m x Staggered 80 mm - 2 conn.
D 144 Fiber 3 0.5 m x Staggered 80 mm - 3 conn.
4 0.5 m x Staggered 80 mm - 4 conn.
6 0.5 m x Staggered 80 mm - 6 conn.

45
 SFP+ Active Optical Cable/
Transceiver
Save money without compromising speed or system performance with Belden’s Active
Optical Cable (AOC) and Optical Transceiver. Achieve high coupling efficiency of ~60%,
high yield and low power consumption with these reliable solutions. A customized
connectivity solution using Belden’s fiber optic products will provide what you need to
drive higher speeds and improve data connectivity while reducing operating costs.

Benefits Features Key Applications

• Lower-cost solution when compared to • Low power consumption • InfiniBand (SDR, DDR, QDR, FDR-10)
traditional < 0.3 W per Transceiver • 10G Ethernet
fiber installation < 0.6 W for AOC
• Fibre channel (10GFC)
• Works with most major brands of • Low-cost proprietary light coupling and
• Top-of-rack switching
networking equipment assembly
• Storage area networks
• Lower total cost of ownership • Easy-release pull tabs

46
Our End-to-End Expertise.
Your End-to-End Solution.

Ordering Information

To use the configuration matrices, make a selection from each category and combine to form a custom part number.
See examples below.

Part number example from

configuration shown below:
AS+S+10G001MLSO
Active Optical Cable

A S+ S+ 10 G 001M L S O
FX Performance/ Length & Temperature Jacket
Inside End Outside End Compatibility Flammability
AOC Application Measure Range Color

S+ SFP+ S+ SFP+ 10 10G G Generic 001M 1m L LSZH Standard O Orange

S
1 Cisco 003M 3m P Plenum (0°C - 70°C)

005M 5m

008M 8m

010M 10 m

020M 20 m

100M 100 m

150M 150 m

Part number example from

configuration shown below:
MS+10G300MS-S1
Optical Transceiver

M S+ 10 G 300M S -S1
Performance/
FX Module Inside End Compatibility Reach Temperature Range Unit per Pack
Application

Multimode S+ SFP+ 10 10G G Generic 300M 300 m Standard -S1 1 unit pack
M S
Module 1 Cisco (0°C-70°C) -B10 10 unit pack

-B20 20 unit pack

47
48
Our End-to-End Expertise.
Your End-to-End Solution.

Section Table of Contents

Workstation
n Workstation
FiberExpress® Workstation Connectivity 50–55
FX Multi Box (M-Box), MDVO Multimedia Outlet Box and Multi-User Outlet Box 50–51
KeyConnect Square Faceplates 52–53
KeyConnect & MDVO Fiber Adapter Modules 54
FX Secure/Keyed LC System 55
FiberExpress® Field Termination 56–57
FX Brilliance Universal Connectors 56
FX Brilliance Universal Installation Kits and Accessories 57
FiberExpress® Fusion Splice-on Connectors 58–59

49
 FiberExpress®   Workstation Connectivity
FX Multi Box (M-Box) and MDVO Multimedia Outlet Box

Strategically placed connectivity through overt design. Compact low-port count field-term
or pre-term distributed consolidation points minimizing installation time by maximizing
trunk capacity.

Faster
• Faster installation with a variety of surface mount options

Easier
• Easier distribution of low port count connectivity and breakouts with self-contained designs
• Easier field-termination with easily accessible consolidation points

Better
• Better options for pre-term and field-term including splicing

FX Wall Box (W-Box)

Protect and manage field-terminated fiber within a compact easily mounted termination
box supporting both Mechanical Splice and Fusion Splice termination techniques.

FWSWBF04SB, FX W-Box, 4 x SC/APC Simplex Belden Part Number

Description OM3 OM4 OS2 OS2/APC
Aqua Erika Violet Blue Green
FX Wall-Box, 1x SC Simplex – – FWSWBF01SC FWSWBF01SB
FX Wall-Box, 2x SC Simplex – – FWSWBF02SC FWSWBF02SB
FX Wall-Box, 4x SC Simplex – – FWSWBF04SC FWSWBF04SB

FX Multi Box (M-Box)

Extremely compact, the feature rich M-Box is ideally suited for floor box and consolidation
point applications. Supporting pre-terminated MPO-12(f) connectivity with an integrated
fanout to LC, 1G and 10G Ethernet can be quickly deployed and re-deployed eliminating
field termination. When the need arises additional versions of the M-Box are fully equipped
to handle and protect field termination including both mechanical splice and pigtail fusion
splicing techniques.

Belden Part Number

Description OM3 OM4 OS2 OS2/APC
Aqua Erika Violet Blue Green
FX Multi-Box Pre-Term MPO-12(f) to 6 x LC Duplex FW3MBP06LD FW4MBP06LD FWSMBP06LD FWSMBP06LA
FW3MBP06LD, FX M-Box Pre-Term,
FX Multi-Box Field-Term, (with Pigtails) FW3MBS06LD FW4MBS06LD FWSMBS06LD FWSMBS06LA
6 x LC Duplex, 1 MPO-12(f), OM3 FX Multi-Box Field-Term, (without Pigtails) FW3MBF06LD FW4MBF06LD FWSMBF06LD FWSMBF06LA

50
Our End-to-End Expertise.
Your End-to-End Solution.

MDVO Multimedia Outlet Box

The MDVO Multimedia Outlet Box brings unique versatility for multimedia work area
installations. The box design provides cable management and helps maintain cable bend
radius. The low profile design and side-entry of the outlet box offers better protection for
patch cords. The outlet box can accept up to six MDVO-style modules or three SC Duplex
footprint adapters. The MDVO Multimedia Outlet Box can be mounted directly on the wall
or attached to standard electrical boxes. Included with the MDVO Multimedia box are
three 1-port SC Duplex footprint mounting bezels and three 2-port MDVO adapters.
0643206,
Belden Part Number MDVO Multimedia
Description Outlet Box (shown terminated)
Almond White
MDVO Multimedia Outlet Box, 6-Port A0643206 A0643207
*See the Belden copper catalog for a larger selection.

Multi-User Outlet Box, MDVO Fiber Adapter Modules, KeyConnect Fiber Adapter
Modules and Standard Duplex Fiber Adapters

Multi-User Outlet Box

The Multi-User Outlet Box is a versatile box that can be used in many different applications.
The outlet box can accommodate up to 24 connections of any type: UTP, fiber or coax.
The outlet box is ideal for use as a multi-user telecommunications assembly, or simply as a
high-density multimedia telecommunications outlet. The Multi-User Outlet Box can also be
used as a wall mounted patch panel in confined areas, such as shallow rooms and cabinets.

Belden Part Number

Description
Almond Elec. White Black
AX100222,
Multi-User Outlet Box, 24-MDVO Ports (Empty) AX100220 AX100221 AX100222 Multi-User Outlet Box
Multi-User KeyConnect 12-Port Adapter Strip – – AX104615 (shown here with optional modules)
Multi-User MDVO 12-Port Adapter Strip – – AX100223

51
 FiberExpress®   Workstation Connectivity
KeyConnect Square Faceplates

Belden’s new faceplate (86x86) range to complete IBDN® workstations quickly and
efficiently, with the added benefit of installation flexibility, and uniform aesthetics.

Plenty of Choice for Maximum Flexibility

The Belden faceplate range offers a choice of five faceplates, and two styles.
• 
The faceplates are capable of accepting category jacks, fiber adapters and multi-media
• 
modules in keystone style.
These new faceplates can be either wall-mounted on an appropriate wall back box or
• 
underfloor mounted in floor faceplates and are available in Electric White color.

Durability and Reliability

All Belden faceplates are designed to provide maximum durability, protection and
• 
reliable performance.
They feature a sturdy design for impact resistance, made from the best quality ABS.
• 
They include a shutter to protect modules from dust and debris and provide optimum
• 
performance, density and durability, while inserts and adapters are easily released for
further configurations.
L abel windows are situated at the top part of the faceplates, so that the cords do not
• 
block the labels.
This facilitates easy identification, avoiding labels at the bottom where they could not
• 
easily be seen after installation.

52
Our End-to-End Expertise.
Your End-to-End Solution.

Description Part Number

KeyConnect Square Faceplates

Premium Two Piece Faceplate/Almond
KeyConnect Tilted Single Faceplate – Fiber 86 x 86 x 37.7 AX104447F
KeyConnect Tilted Double Faceplate – Fiber 86 x 86 x 37.7 AX104448F

KeyConnect Tamper Resistant Faceplates

Faceplate Kit, KeyConnect-Style/White
4-port, single-gang with locking cover patch cord seal and wall gasket AX104687
(dust and water resistant)
4-port, single-gang with locking cover (secure outlet) AX104688
Secure screw driver bit (Drilled Spanner 1/4˝) AX104689

Part Number
Description AX104448F
White Black Gray KeyConnect
Tilted Double Faceplate
MDVO Faceplates and Inserts
6c Faceplates
Single Gang, Single Aperture NN01520 NN01532 NN01544
Single Gang, Dual Aperture NN01521 NN01533 NN01545
Double Gang, Quad Aperture NN01522 NN01534 NN01546
6c Inserts
Shuttered Adapter, 1 Port Flush, KeyConnect NN01525 NN01537 NN01549
Shuttered Adapter, 1 Port Angled, KeyConnect NN01526 NN01538 NN01550
Blank Insert, 1 Port NN01527 NN01539 NN01551
Euromod Faceplates
Single Gang, 50 x 50 mm Aperture NN01523 NN01535 NN01547
Double Gang, 50 x 100 mm Aperture NN01524 NN01536 NN01548
Euromod Inserts
Shuttered Adapter, 1 Port Flush, KeyConnect NN01528 NN01540 NN01552
Shuttered Adapter, 1 Port Angled, KeyConnect NN01529 NN01541 NN01553 AX104688
KeyConnect
Blank Insert, 12.5 x 50 mm NN01530 NN01542 NN01554 Tamper-Resistant Faceplate
Blank Insert, 25 x 50 mm NN01531 NN01543 NN01555 with locking cover

6c Faceplates

53
 FiberExpress® Workstation
Connectivity
KeyConnect & MDVO Fiber Adapter Modules

MDVO Fiber Adapter Modules

Belden Part Number
Description
Almond Elec. White Black
LC Duplex - OM3 (Aqua Adapter) AX105505-AL AX105505-WH AX105505-BK
SC Simplex - OM3 (Aqua Adapter) AX105697-AL AX105697-WH AX105697-BK
All MDVO Adapter Modules listed above come in quantities of 25 per package
Please contact Belden for any help configuring/validating SmartPart Numbers or for any other custom Engineered solutions

AX102101,
OM4 MDVO KeyConnect Fiber Adapter Modules
Adapter Module
with LC Keyed Red Adapter, White Holder Belden Part Number
Description
Almond Elec. White Black
LC Duplex - OM3 (Aqua Adapter) AX104937 AX104938 AX104939
LC Duplex - OM4 (Erika Violet Adapter) AX105641-AL AX105641-EW AX105641-BK
SC Simplex OM1 (Beige Adapter) AX102683 AX102684 AX102685
SC Simplex - OM3 (Aqua Adapter) AX105643-AL AX105643-EW AX105643-BK
ST- Metal AX102242 AX102243 AX102244
All KeyConnect Adapter Modules listed above come in quantities of 25 per package
Please contact Belden for any help configuring/validating SmartPart Numbers or for any other custom Engineered solutions

Standard Duplex Footprint Fiber Adapters

Belden Part Number
Description OM3 OM4 OS2 OS2/APC
Aqua Erika Violet Blue Green
SC Duplex, Flangeless AX105691-B25 AX105692-B25 AX105002-B25 AX105646-B25
AX104939,
SC Duplex w/Shutters, Flangeless – – AX105693-B25 AX105694-B25
KeyConnect Adapter,
LC Duplex, OM3 (Aqua Adapter), Black Holder Refer to the Belden copper catalog for a larger selection of workstation connectivity options.

54
Our End-to-End Expertise.
Your End-to-End Solution.

FiberExpress® Secure/
Keyed LC System
FX Secure/Keyed LC System

The FX Secure/Keyed LC System allows for physical segregation of network segments

in secure fiber cabling infrastructures. All Secure/Keyed LC products are available with
12 different keying options each carrying a different color to facilitate network adminis-
tration. The keying detail inside the connector is highly tamper-resistant and cannot be
reproduced inside a standard LC connector to violate the network security. All products
comply with the FOCIS 10 standard and optical performance exceeds all industry standards FX Secure/
Keyed LC System
for SFF connectors.

The Secure/Keyed LC Adapter Modules, Frames, Cassettes and Adapter Strips can be
used in all mounting hardware for workstation area, Consolidation Point or Telecom
Room applications. The Secure/Keyed LC FX Manager Modules can be used in 19- and
23-inch FX Manager Shelves to provide a high-density management system.

The Secure/Keyed LC FX Ultra Frames and Cassettes can be used with the FX UHD Rack
and FX Ultra Wall-mount Patch Panels to provide an Ultra high-density patching system
that is easy to deploy, operate and maintain, while ensuring maximum uptime, uninter-
rupted availability and superior performance.

The Secure/Keyed LC Patch Cords and Pigtails are offered in Multimode 62.5 μm (OM1),
laser-optimized 50 μm (OM3 and OM4) and Singlemode (OS2) for the most demanding
network performance.

The Secure/Keyed LC Brilliance Universal Field Installable Connectors are available in FX Brilliance
Connectors
Multimode 50 μm laser-optimized (OM4, OM3 compatable) and Singlemode (OS2) fiber
versions.

FX Secure/Keyed LC System
Description Splices
LC Key1 Red
LC Key2 Green
LC Key3 Yellow
LC Key4 Black
LC Key5 Orange
LC Key6 Blue
LC Key7 Violet
LC Key8 Rose
LC Key9 Aqua
LC KeyA Brown
LC KeyB Slate
FX Secured/
LC KeyC White Keyed LC Ultra Cassette
For additional details, please refer to the Secure/Keyed LC System Product Bulletin PB275.

55
 FiberExpress® Field Termination
FX Brilliance Universal Connectors

Brilliant in design and universal in implementation, FX Brilliance Universal no-epoxy,

no-polish, no-crimp field-installable connectors make fiber field termination faster, easier
and better with our industry-leading design.

Faster
• Faster fiber termination in as few as 5 seconds
• Faster installation proficiency through simple termination technique
• Faster 250 µm direct installation eliminating break-out kits

Easier
• Easier with no epoxy or polishing
FX Brilliance • Easier no-crimp design
Universal Connectors • Easier with duplex clips to hold TX/RX pairs together

Better
• Better termination yield with integrated VFL feedback
• Better universal cable support for 250 µm, 900 µm, 2 mm Jacketed, 3 mm Jacketed
• Better universal fiber support for OM1, OM2, OM3, OM4 as well as OS2
Three Simple Steps
Connector Performance Maximum Insertion Loss Typical Insertion Loss Return Loss
1 Insert Fiber Multimode 0.5 dB 0.2 dB 25 dB
Singlemode UPC 0.5 dB 0.3 dB 50 dB
Singlemode APC 0.5 dB 0.3 dB 60 dB

Belden Part Number

Description
Multimode, OM1 Multimode, OM3/OM4 - Multimode, OM4 -
Aqua Erika Violet
LC with 900 μm Boot, 25 per package AX105200-B25 AX105202-B25 AX105252-B25
SC with 900 μm Boot, 25 per package AX105205-B25 AX105207-B25 AX105253-B25
ST with 900 μm Boot, 25 per package AX105210-B25 AX105212-B25 AX105254-B25
2 Activate Tab
Replace -B25 with -S1 for sample 1 per package.

Belden Part Number

Description Singlemode, OS2 Singlemode, OS2/APC
1 per package 25 per package 1 per package 25 per package
LC with 900 μm Boot AX105203-S1 AX105203-B25 – –
SC with 900 μm Boot AX105208-S1 AX105208-B25 AX105209-S1 AX105209-B25
ST with 900 μm Boot AX105213-S1 AX105213-B25 – –
FX Brilliance Universal includes a boot for 900 µm Tight Buffered fiber. Boots for 2 mm/3 mm Jacketed fiber are sold separately.

3 Install Boot
Description Belden Part Number
250 μm Boot, 25 per package FXBUBO250B25N
2 mm Jacketed Boot, 25 per package AX105214-B25
3 mm Jacketed Boot, 25 per package AX105215-B25

Description Belden Part Number

LC Duplex Clip (Black), 25 per package FXBUCLLDB25N
SC Duplex Clip (Black), 25 per package FXBUCLSDB25N

56
Our End-to-End Expertise.
Your End-to-End Solution.

FX Brilliance Universal Installation Kits and Accessories

Improve Installer Comfort, Repeatability and Performance

Although termination of the FX Brilliance Universal connector can be done with no

specialized tools, installation kits are available with all the tools necessary to prepare the
fiber as well as to provide a stable work platform to achieve optimal installation results.

FX Brilliance Installation Kit

Description Belden Part Number
Precision Installation Kit (Basic Kit, Fiber Preparation Tools, Precision Cleaver and Visual Fault Locator) AX104271 AX104271,
Precision Installation Kit
FX Brilliance Accessories
Description Belden Part Number
Precision Cleaver AX104286
Precision Cleaver Replacement Blade (for FC-7 cleaver) AX104293
Precision Cleaver Replacement Blade (for FC-7R cleaver) AX104593
Support Handle with Adapters AX104276
Support Handle LC Adapter AX104289 AX104286,
Support Handle SC Adapter AX104290 Precision Cleaver

Support Handle ST Adapter AX104291

Visual Fault Locator (VFL-250) with Adapter Cords AX104283
Visual Fault Locator (VFL-125) LC-LC Adapter Cord AX203567
Visual Fault Locator (VFL-125/250) LC-SC Adapter Cord (valid for ST also) AX203568
Visual Fault Locator (VFL-250) SC-SC Adapter Cord (valid for ST also) AX203569
Visual Fault Locator (VFL-125) LC-SC/APC Adapter Cord & Support Handle SC/APC Adapter AX203895
Visual Fault Locator (VFL-250) SC-SC/APC Adapter Cord & Support Handle SC/APC Adapter AX203930
Fiber/Cable Stripper AX103151 AX104276, Support Handle
Pen Marker AX104279 with Adapters
Refurbishing Materials (80 alcohol wipes and a black pen marker) AX100951
Safety Glasses AX104282
Scissors AX104280
Tweezers AX104278
Waste Bottle AX104281

Ensure Durable Rugged Installation on 250 µm Fiber

Field Breakout kits are available to provide a durable 900 µm coating for 250 µm fibers
to ensure optimal retention, flex and twist support without sacrificing the outdoor
performance of loose-tube cables or the small diameter of mini-distribution cables.

FX Breakout Kits
Description Belden Part Number
Breakout Kit for 2.0 mm Subunits, 6-fiber, 1-Pack AX101100
Breakout Kit for 3.0 mm Subunits, 12-fiber, 1-Pack AX101101
Breakout kit for 5.2 mm Subunits (Central Tube), 6-fiber, 1-Pack AX104695 When used with the VFL, a light can be seen through
Breakout kit for 5.2 mm Subunits (Central Tube), 12-fiber, 1-Pack AX104696 the clear window on the connector body until a fiber
has been properly terminated

You can use the FX UHD Splice Cassette

(see page 20 ) with the 250 µm Boot to eliminate
the need to install a Break-out kit.

57
COMING
SOON FiberExpress®
Fusion Splice-on Connectors
Belden’s FiberExpress (FX) Fusion connectors enable splice-on technology. They combine
the benefits of fusion splicing with the simplicity of a field-installable connector to
expand your options for field-termination and improve installation performance and
reliability over mechanical splice connectors. No crimping, polishing, or adhesives are
required for termination, minimizing installation errors.

Benefits

Fewer Splice Management Accessories Required

• 
Eliminates need for splice enclosures and splice trays
Flexible Installations
• 
Run exact length channels to eliminate cable shorts and excess slack
Reliable Terminations
• 
Automated splicing tools consistently provide the highest quality termination
Superior Technology and Affordable Quality
• 
A premium solution without the premium price

Features

Fiber Ferrule is Ready for Termination

• 
Factory pre-cleaved and pre-cleaned fiber stub
Better Insertion Loss and Return Loss Performance over Mechanical Splice Connectors
• 
Superior performance critical to support high-bandwidth/high-speed transmission to
applications (25G, 40G and 100G)
Robust Connector for Indoor and Outdoor Applications
• 
Meets TIA-568-D3 and GR-326/1081*
Compatible Splicer Accessories
• 
FX Fusion holders are compatible with industry leading fusion splicers

*GR rating will be available in summer 2017.

58
Our End-to-End Expertise.
Your End-to-End Solution.

Ordering Information

To use the tailored SmartPart configuration matrices, make a selection from each category and combine to form a custom part number.
See example(s) below.

FX Fusion Multimode Connectors

Belden Part Number
Description
Mutlimode, OM1 - Beige Mutlimode, OM3/OM4 - Aqua Mutlimode, OM4 - Erika Violet
LC with 900 μm Boot, 1/Pack FT1LC900FS01 FT3LC900FS01 FT4LC900FS01
SC with 900 μm Boot, 1/Pack FT1SC900FS01 FT3SC900FS01 FT4SC900FS01

FX Fusion Singlemode Connectors

Belden Part Number
Description
Singlemode, OS2 - Blue Singlemode, OS2/APC - Green
LC with 900 μm Boot, 1/Pack FTSLC900FS01 FTSLB900FS01
SC with 900 μm Boot, 1/Pack FTSSC900FS01 FTSSB900FS01

FX ECX Splice Cassette Options Part number example from configuration shown below: FT3LC900FS01

FT 3 LC 900 F S01
Field Termination Fiber Type Connector Cable Type Family Packaging
1 OM1 LC LC Simplex 900 Tight Buffer F Splice-On S01 Single Pack
3 OM3 LB LC/APC Simplex 2MM** Jacketed
4 OM4 SC SC Simplex
S OS2 SB SC/APC Simplex

FX Fusion Accessories
Description Belden Part Number
Precision Tool Kit FXFSTOPTK
Standard Tool Kit FXFSTOSTK
Precision Cleaver FXFSTOPCL
Standard Cleaver FXFSTOSCL
Splice Holder Family 1 FXFSSHFM1*
Splice Holder Family 2 FXFSSHFM2
Slitter for Jacketed Fiber FXFSTOSLT

*FXFSSHFM1 Holder compatible with Fujikura 60S, Fujikura 70S, Sumitomo Q101, among many others.
Visit www.belden.com/splice-on for more details.

FiberExpress Field-Termination Part number example from

FX Fusion Configurator configuration shown below: FXFSTOSTK

FX FS TO STK
FiberExpress Product Family Product Type Other Information
FS FX Fusion TO Tools SPL Splicer Kit
SH Splice Holder PTK Precision Tool Kit
PCL Precision Cleaver
SLT Slitter for Jacketed Fiber
STK Standard Tool Kit
SCL Standard Cleaver
FM1 Splice Holder Family 1
FM2 Splice Holder Family 2

59
60
Our End-to-End Expertise.
Your End-to-End Solution.

Section Table of Contents

Wall Mount Systems
n Wall Mount Systems
FiberExpress® Wall Mount Systems 62–63
FX UHD Wall Mount 62–63
FX Ultra Wall Mount and Accessories 63–63
FiberExpress® In-Build Systems 64–65
In-Build Wall-Box 64–65

61
 FiberExpress® Wall Mount Systems
FX UHD Wall Mount

Clean, simple, lightweight wall mount unit that accepts all cassettes and frames from the
FX UHD ecosystem. The FX UHD wall mount is a modular platform; A vertically stacked
configuration creates an interconnect, while the patching spaces can be combined in
a horizontal configuration to make a proper cross-connect. There are two separate
compartments, one for the main service area (lockable) and one for the patching space.
Ideal for MDUs and Passive Optical LAN applications.

AX106818, FX UHD Stackable Wall Mount Patch Panel

FX Ultra Wall Mount and Accessories

Resolute protection while maintaining the utmost adaptability. Complete selection of

fiber enclosures provides effortless security and protection while leveraging both the
flexibility and density of the FX UHD frames and cassettes.

Faster

• Faster installation with easy access and lightweight housing

AX103928, FX Ultra Stackable Wall Mount Patch Panel
• Faster installation with pre-terminated cassettes

Easier

• Easier configuration with FX UHD and FX Ultra modules in LC, SC and ST

• Easier security with optical door lock
• Easier expansion with stackable design

Better

• Better with support for Pre-Term and Field-Term including splicing

• Better management with independent doors for trunk and patching sides
AX103930, FX Ultra Wall Mount Splice Enclosure • Better density with up to 36 LC Duplex ports

AX103928 and AX103932,

FX Ultra Wall Mount Patch Panel with Spacer FX Ultra Splice Trays

62
Our End-to-End Expertise.
Your End-to-End Solution.

FX UHD Wall Mount

Description Belden Part Number
FX UHD Wall Mount Patch Panel, Black AX106817
FX UHD Wall Mount Patch Panel, Gray AX106818
4 cassettes; 4 frames; 48 fibers (SC, SCD, ST, LCD); 4 FXU Fusion Trays, 8-inch (AX103912)

FX Ultra Wall Mount

Number of
Description Splice Trays Belden Part Number
Module Bays
Stackable Wall Mount Patch Panel, Black 2 2 x 8” (Up to 48-Splices) AX103928
Stackable Wall Mount Splice Enclosure 0 4 x 10” (Up to 144-Splices) AX103930
Splice trays sold separately

FX Ultra Splice Trays

Description Splices per Tray Belden Part Number
8” Splice Tray 24 AX103912
10” Splice Tray 36 AX103913
All splice trays accommodate 2.5 mm OD single fiber splice protectors up to 80 mm in length or part number FXFUHS900AB25

FX Ultra Wall Mount Accessories

Description Belden Part Number
2-inch Spacer, Black AX103932
Door Lock Kit AX103934

63
 FiberExpress® In-Build Systems
In-Build Wall-Box

Data module of hybrid cabinets for home distribution systems. IP20 / IK05
• 
Welded frame from 1 mm thick sheet steel combined with plastic PEHD 8 mm
• 
Frame door combined with steel of 1 mm thickness and plastic PP-H 1,5 mm
• 
Designed enabling WiFi supported devices
• 
Hybrid key-connect design with Keystone CAT5e/6/6A Jacks, OFC Keystone SC/APC –
• 
DX LC/APC adapters and Other Keystone multi-media connectivity

64
Our End-to-End Expertise.
Your End-to-End Solution.

Ordering Information

For empty box, the part numbers are:

EWF-FTTX-L Large Empty Wall-Box (H1100xW396xD131mm)

EWF-FTTX-M Medium Empty Wall-Box (H500 x W500 x D110mm)

For wall box loaded with jacks and/or adapters and pigtails, please use the configurator below:

Box Type QTY of Jacks QTY of OFC single mode adapters

24 24 Jacks 12 12 adapters
EWF Wall Box for FTTX
12 12 Jacks 06 6 adapters
6 6 Jacks

E WF O - 11 22 11 44

Size Type of Jacks Type of OFC adapters

L Large size box C5 CAT 5e LA LC/APC-DX
M Medium size box C6 CAT 6 SA SC/APC-DX
A6 CAT6A

Example: EWFL-24C606LA Large FTTx box with 24 CAT6 + 6 LC/ APC and splice tray

EWFM-24C606LA Medium FTTx box with 24 CAT6 + 6 LC/ APC and splice tray

65
66
Our End-to-End Expertise.
Your End-to-End Solution.

Section Table of Contents

Optical Fiber Cables
n Optical Fiber Cables
Belden Optical Fiber Cables 68
Fiber Types 69
Universal Central Loose Tube Cable with Rodent Protection, Single Jacket 70–71
Universal Mini-Breakout 72–73
Belden Warranties and Certification 74–75

67
 Belden Optical Fiber Cables
Reduce Complexity and Increase Flexibility

Today’s advanced networks are diverse and almost always complex. The right way ahead
is to future-proof these networks and to take precautions to protect them against anything
that will create problems, damage or disruption. That means matching the right hardware
with the right cabling to guarantee performance – and that means choosing fiber optic
cable. Optical fiber cables offer many benefits: high bandwidth and transmission speed,
the potential for network growth, extended reach, fault tolerance, greater data security
and support for Gigabit and multi-Gigabit protocols and networked applications.

Involved in the development of optical fiber components for over 40 years, Belden is a
leading supplier of high-quality, cost-effective optical fiber cabling systems. Belden’s fiber
cabling range is the culmination of our experience and expertise in a variety of applications,
including data centers, premise and campus network backbone infrastructures,
fiber-to-the-desk (FTTD) applications, horizontal and centralized cabling systems.
Belden’s fiber cables are designed to offer reduced complexity, increased flexibility, and
rapid installation for maximum cost effectiveness.

This catalog will provide you with comprehensive information about our optical fiber
cabling portfolio – from buffered fiber cables right through to central and multi loose tube
variations for several applications. The upcoming pages contain all the key technical
data and ordering information about the products to help you with configuring the right
fiber backbone for your next mission critical application.

68
Our End-to-End Expertise.
Your End-to-End Solution.

Fiber Types
Tight Buffer Optical Characteristics

European Mode-Field/ Attenuation Cable Cut-off

Wave-length Dispersion PMD Min. Bending
Part Number Fiber-Type Cladding Diameter Average/max. Wave-length
(nm) (ps/nm-km) (ps/km) Radius (mm)
Coding, Position 5 (µm) (dB/km) (nm)

Characteristics (cabled) Single-Mode • Matched-Cladded Optical Fibers according to ITU

A 9/125 8.9 ± 0.4 1310 0.35/0.4 ≤ 3.5 ≤ 0.2 A ≤ 1260 10

G.657A1 125.0 ± 0.3 1550 0.21/0.3 ≤ 18.0
OS2 1625 0.24/0.4
F 9/125 8.9 ± 0.4 1310 0.35/0.4 ≤ 3.5 ≤ 0.2 A ≤ 1260 7.5
G.657A2 125.0 ± 0.3 1550 0.21/0.3 ≤ 18.0
OS2 1625 0.24/0.4
I 9/125 8.8 ± 0.4 1310 0.35/0.4 ≤ 3.5 ≤ 0.2 A ≤ 1260 5.0
G.657B3 125.0 ± 0.3 1550 0.22/0.3 ≤ 18.0
OS2 1625 0.24/0.4

European Core/Cladding Attenuation Ethernet

Wave-length Bandwidth Performance (m) Num. Apert. Min. Bending
Part Number Fiber-Type Diameter Average/max.
(nm) (MHz/km) 1 GBE 10 GBE (μm) Radius (mm)
Coding, Position 5 (µm) (dB/km)

Characteristics (cabled) Multi-Mode • Graded-Index Optical Fibers according to IEC 60793

1 62.5/125 OM1 62.5 ± 2.5 850 2.7/3.2 ≥ 200 275 33 0.275 ± 0.015 25
125.0 ± 1.0 1300 0.6/1.1 ≥ 600 550 300
2 50/125 OM2 50.0 ± 2.5 850 2.4/3.0 ≥ 500 600 82 0.200 ± 0.015 25
125.0 ± 1.0 1300 0.7/1.0 ≥ 500 600 300
3 50/125 OM3 50.0 ± 2.5 850 2.5/3.0 ≥ 1500 900 300 0.200 ± 0.015 25
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300
D 50/125 OM3 Flex 50.0 ± 2.5 850 2.5/3.0 ≥ 1500 900 300 0.200 ± 0.015 7.5
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300
6 50/125 OM4 50.0 ± 2.5 850 2.5/3.0 ≥ 6000 900 550 0.200 ± 0.015 25
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300
E 50/125 OM4 Flex 50.0 ± 2.5 850 2.5/3.0 ≥ 6000 900 550 0.200 ± 0.015 7.5
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300

Loose Tube Optical Characteristics

European Mode-Field/ Attenuation Cable Cut-off

Wave-length Dispersion PMD
Part Number Fiber-Type Cladding Diameter average/max. Wave-length
(nm) (ps/nm-km) (ps/km)
Coding, Position 5 (µm) (dB/km) (nm)

Characteristics (cabled) Single-Mode • Matched-Cladded Optical Fibers according to ITU

8 9/125 9.2 ± 0.4 1310 0.32/0.40 ≤ 3.5 ≤ 0.2 A ≤ 1260

G.652D OS2 125.0 ± 0.7 1550 0.19/0.22 ≤ 18.0
7 9/125 8.4 ± 0.6 1550 0.25/0.30 3.5 – 8.5 ≤ 0.1A ≤ 1260
G.655 C & D 125.0 ± 1.0

European Core/ Wave- Attenuation Ethernet Num.

Bandwidth Performance (m) Num. Apert.
Part Number Fiber-Type Cladding Diameter length average/max. Apert.
(MHz/km) 1 GBE 10 GBE (μm)
Coding, Position 5 (µm) (nm) (dB/km) (μm)

Characteristics (cabled) Multi-Mode • Graded-Index Optical Fibers according to IEC 60793

1 62.5/125 OM1 62.5 ± 2.5 850 2.7/3.2 ≥ 200 275 33 0.275 ± 0.015 1.495
125.0 ± 1.0 1300 0.6/1.1 ≥ 600 550 300 1.490
2 50/125 OM2 50.0 ± 2.5 850 2.4/3.0 ≥ 500 600 82 0.200 ± 0.015 1.481
125.0 ± 1.0 1300 0.7/1.0 ≥ 500 600 300 1.476
3 50/125 OM3 50.0 ± 2.5 850 2.5/3.0 ≥ 1500 900 300 0.200 ± 0.015 1.482
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300. 1.477
6 50/125 OM4 50.0 ± 2.5 850 2.5/3.0 ≥ 6000 900 550 0.200 ± 0.015 1.482
125.0 ± 1.0 1300 0.5/1.0 ≥ 500 550 300 1.477

Note A: Link design value

69
 Universal Central Loose Tube Cable
with Rodent Protection, Single Jacket
GUSN, GUSL, GURN, GUVN A/I-DQ(ZN)BH

Applications

• For outdoor and indoor use in structured (data) wiring systems such as campus backbone
• Easy to install in ducts, tunnels and trenches by means of compressed air or pulling wire
• Suitable for direct burial

Features & Benefits

• Available in sizes from 2 to 24 fibers

• Jelly filled (non-dripping and silicon-free) loose tube with primary coated optical fibers
(Ø 250 ± 15 µm)
• Full dielectric construction, no grounding required
• Rodent protected by means of Glass Yarn Strength Elements
• Length marking in meters for easy determination of the cable length

Cross Section Specifications

IEC 60794-1-2
Crush Resistance (E3): 15 kN/m
Min. Bend Radius dynamic (E6): 15 x Ø
Min. Bend Radius static (E11): 10 x Ø
Min. Bend Radius fibers: 25 mm
Temperature Range (F1):
– Transport/Storage -30°C to +70°C
– Installation -5°C to +50°C
– Operation -30°C to +70°C
Watertightness (F5): Pass
Other
Flame Retardant:
– GUSN, GURN, GUVN IEC 60332-1
– GUSL IEC 60332-3-25
Halogen Free: IEC 60754-1
Non Corrosive: IEC 60754-2
Smoke Density: IEC 61034-2

70
Our End-to-End Expertise.
Your End-to-End Solution.

Characteristics

Tensile Strength Tensile Strength

Diameter Weight Fire Load
Loose Tube Fiber Count (short term) (permanent)
(mm) (kg/km) (kJ/m)
N N

IEC 60794-1-2 E1 E1
GUSN*xx 2 to 24 5.8 37 1500 700 550
GUSL*xx 2 to 24 6.5 47 1500 700 580
GURN*xx 2 to 24 7.1 55 3500 1750 755
GUVN*xx 2 to 24 7.8 67 5000 2500 928

Ordering Information

Fiber Type/Count 2 4 6 8 12 16 24

GUSN
62.5/125-OM1 GUSN102 GUSN104 GUSN106 GUSN108 GUSN112 GUSN116 GUSN124
50/125-OM2 GUSN202 GUSN204 GUSN206 GUSN208 GUSN212 GUSN216 GUSN224
50/125-OM3 GUSN302 GUSN304 GUSN306 GUSN308 GUSN312 GUSN316 GUSN324
50/125-OM4 GUSN602 GUSN604 GUSN606 GUSN608 GUSN612 GUSN616 GUSN624
9/125 ITU G.652D GUSN802 GUSN804 GUSN806 GUSN808 GUSN812 GUSN816 GUSN824
9/125 ITU G.655 C & D GUSN702 GUSN704 GUSN706 GUSN708 GUSN712 GUSN716 GUSN724
GUSL
62.5/125-OM1 GUSL102 GUSL104 GUSL106 GUSL108 GUSL112 GUSL116 GUSL124
50/125-OM2 GUSL202 GUSL204 GUSL206 GUSL208 GUSL212 GUSL216 GUSL224
50/125-OM3 GUSL302 GUSL304 GUSL306 GUSL308 GUSL312 GUSL316 GUSL324
50/125-OM4 GUSL602 GUSL604 GUSL606 GUSL608 GUSL612 GUSL616 GUSL624
9/125 ITU G.652D GUSL802 GUSL804 GUSL806 GUSL808 GUSL812 GUSL816 GUSL824
9/125 ITU G.655 C & D GUSL702 GUSL704 GUSL706 GUSL708 GUSL712 GUSL716 GUSL724
GURN
62.5/125-OM1 GURN102 GURN104 GURN106 GURN108 GURN112 GURN116 GURN124
50/125-OM2 GURN202 GURN204 GURN206 GURN208 GURN212 GURN216 GURN224
50/125-OM3 GURN302 GURN304 GURN306 GURN308 GURN312 GURN316 GURN324
50/125-OM4 GURN602 GURN604 GURN606 GURN608 GURN612 GURN616 GURN624
9/125 ITU G.652D GURN802 GURN804 GURN806 GURN808 GURN812 GURN816 GURN824
9/125 ITU G.655 C & D GURN702 GURN704 GURN706 GURN708 GURN712 GURN716 GURN724
GUVN
62.5/125-OM1 GUVN102 GUVN104 GUVN106 GUVN108 GUVN112 GUVN116 GUVN124
50/125-OM2 GUVN202 GUVN204 GUVN206 GUVN208 GUVN212 GUVN216 GUVN224
50/125-OM3 GUVN302 GUVN304 GUVN306 GUVN308 GUVN312 GUVN316 GUVN324
50/125-OM4 GUVN602 GUVN604 GUVN606 GUVN608 GUVN612 GUVN616 GUVN624
9/125 ITU G.652D GUVN802 GUVN804 GUVN806 GUVN808 GUVN812 GUVN816 GUVN824
9/125 ITU G.655 C & D GUVN702 GUVN704 GUVN706 GUVN708 GUVN712 GUVN716 GUVN724
GUSN • GURN • GUVN
Std. plywood reel (non-returnable) Ø 800 x 475 mm, Weight 7.65 kg and Ø 1000 x 530 mm, Weight 18.0 kg
Std. delivery length 2100 ± 100 m and 4100 ± 100 m

Fiber Color Coding

No. No. No. No. No. No.
1 Red 5 Green 9 Orange 13 Red + ring 17 Green + ring 21 Orange + ring
2 Natural 6 Violet 10 Turquoise 14 Natural + ring 18 Violet + ring 22 Turquoise + ring
3 Yellow 7 Brown 11 Pink 15 Yellow + ring 19 Brown + ring 23 Pink + ring
4 Blue 8 Black 12 White 16 Blue + ring 20 Grey + ring 24 White + ring

71
 Universal Mini-Breakout
GUMT A/I-V(ZN)H
GUMS A/I-K(ZN)H

Applications

• Structured (premises) wiring systems: campus and/or building backbone (riser) and/or
horizontal cabling
• Support all computer network applications such as FDDI, Gigabit Ethernet and ATM
• Easy to install in ducts, tunnels and trenches. Not recommended for direct burial

Features & Benefits

• Available in sizes from 2 to 72 fibers

• 900 µm buffered fiber allows for use of field-installable connectors
• Semi-tight buffered optical fibers are easily strippable
• Length marking in meters for easy determination of the cable length
• Full dielectric construction, no grounding required
• These cables are halogen-free (= FRNC and LSNH) and watertight and therefore
suitable for internal and external use. Consequently splicing can be avoided and the
installation gets more cost-effective.

Cross Section Specifications

IEC 60794-1-2
Crush Resistance (E3): 4 kN/m
Min. Bend Radius dynamic (E6): 20 x Ø
Min. Bend Radius static (E11): 15 x Ø
Min. Bend Radius fibers: 25 mm
Temperature Range (F1):
– Transport/Storage -30°C to +70°C
– Installation -5°C to +50°C
– Operation -30°C to +70°C
Watertightness (F5): Pass
Stripping (E5), Semi-Tight:
– Secondary coating > 30 cm
– Primary and Secondary > 10 mm
Stripping (E5), Tight:
– Secondary coating > 10 cm
– Primary and Secondary > 10 mm
Other
Flame Retardant: IEC 60332-3-24
Halogen Free: IEC 60754-1
Non Corrosive: IEC 60754-2
Smoke Density: IEC 61034-2

72
Our End-to-End Expertise.
Your End-to-End Solution.

Characteristics
Tensile Strength Tensile Strength
Diameter Weight Fire Load
Tight Buffer Semi-Tight Buffer Fiber Count (short term) (permanent)
(mm) (kg/km) (kJ/m)
N N

GUMT*02 GUMS*02 1x2 5.4 26 800 400 296

GUMT*04 GUMS*04 1x4 5.4 26 800 400 296
GUMT*06 GUMS*06 1x6 5.9 30 900 450 347
GUMT*08 GUMS*08 1x8 5.9 32 900 450 371
GUMT*12 GUMS*12 1 x 12 7.6 45 1000 500 622
GUMT*16 GUMS*16 1 x 16 8.6 53 1000 500 845
GUMT*24 GUMS*24 1 x 24 9.6 74 1200 600 1082
GUMT*36 GUMS*36 3 x 12 19.7 246 5400 2700 2345
GUMT*48 GUMS*48 4 x 12 19.7 286 5400 2700 2970
GUMT*72 GUMS*72 6 x 12 24.6 438 6000 3000 4290
Note: Buffer diameter 0.90 ± 0.05 mm

Ordering Information

Fiber Type/Count 2 4 6 8 12 16 24 36 48 72 Jacket Color

GUMT • Tight Buffer

62.5/125-OM1 GUMT102 GUMT104 GUMT106 GUMT108 GUMT112 GUMT116 GUMT124 GUMT136 GUMT148 GUMT172 Orange
50/125-OM2 GUMT202 GUMT204 GUMT206 GUMT208 GUMT212 GUMT216 GUMT224 GUMT236 GUMT248 GUMT272 Orange
50/125-OM3 GUMT302 GUMT304 GUMT306 GUMT308 GUMT312 GUMT316 GUMT324 GUMT336 GUMT348 GUMT372 Aqua
50/125-OM3 Flex GUMTD02 GUMTD04 GUMTD06 GUMTD08 GUMTD12 GUMTD16 GUMTD24 GUMTD36 GUMTD48 GUMTD72 Aqua
50/125-OM4 GUMT602 GUMT604 GUMT606 GUMT608 GUMT612 GUMT616 GUMT624 GUMT636 GUMT648 GUMT672 Erika-Violet (RAL 4003)
50/125-OM4 Flex GUMTE02 GUMTE04 GUMTE06 GUMTE08 GUMTE12 GUMTE16 GUMTE24 GUMTE36 GUMTE48 GUMTE72 Erika-Violet (RAL 4003)
9/125 ITU G.657A1 GUMTA02 GUMTA04 GUMTA06 GUMTA08 GUMTA12 GUMTA16 GUMTA24 GUMTA36 GUMTA48 GUMTA72 Yellow
9/125 ITU G.657A2 GUMTF02 GUMTF04 GUMTF06 GUMTF08 GUMTF12 GUMTF16 GUMTF24 GUMTF36 GUMTF48 GUMTF72 Yellow
9/125 ITU G.657B3 GUMTI02 GUMTI04 GUMTI06 GUMTI08 GUMTI12 GUMTI16 GUMTI24 GUMTI36 GUMTI48 GUMTI72 Yellow
GUMS • Semi-Tight Buffer
62.5/125-OM1 GUMS102 GUMS104 GUMS106 GUMS108 GUMS112 GUMS116 GUMS124 GUMS136 GUMS148 GUMS172 Orange
50/125-OM2 GUMS202 GUMS204 GUMS206 GUMS208 GUMS212 GUMS216 GUMS224 GUMS236 GUMS248 GUMS272 Orange
50/125-OM3 GUMS302 GUMS304 GUMS306 GUMS308 GUMS312 GUMS316 GUMS324 GUMS336 GUMS348 GUMS372 Aqua
50/125-OM3 Flex GUMSD02 GUMSD04 GUMSD06 GUMSD08 GUMSD12 GUMSD16 GUMSD24 GUMSD36 GUMSD48 GUMSD72 Aqua
50/125-OM4 GUMS602 GUMS604 GUMS606 GUMS608 GUMS612 GUMS616 GUMS624 GUMS636 GUMS648 GUMS672 Erika-Violet (RAL 4003)
50/125-OM4 Flex GUMSE02 GUMSE04 GUMSE06 GUMSE08 GUMSE12 GUMSE16 GUMSE24 GUMSE36 GUMSE48 GUMSE72 Erika-Violet (RAL 4003)
9/125 ITU G.657A1 GUMSA02 GUMSA04 GUMSA06 GUMSA08 GUMSA12 GUMSA16 GUMSA24 GUMSA36 GUMSA48 GUMSA72 Yellow
9/125 ITU G.657A2 GUMSF02 GUMSF04 GUMSF06 GUMSF08 GUMSF12 GUMSF16 GUMSF24 GUMSF36 GUMSF48 GUMSF72 Yellow
9/125 ITU G.657B3 GUMSI02 GUMSI04 GUMSI06 GUMSI08 GUMSI12 GUMSI16 GUMSI24 GUMSI36 GUMSI48 GUMSI72 Yellow
GUMT • GUMS
Std. plywood reel Ø 560 x 336 mm, Ø 800 x 475 mm, Ø 1000 x 530 mm, Ø 1000 x 530 mm, Ø 1250 x 688mm, –
(non-returnable) Weight 4.25 kg Weight 7.65 kg Weight 18.0 kg Weight 18.0 kg Weight 93.0 kg
Std. delivery length 2100 ± 100 m 2100 ± 100 m 2100 ± 100 m 650 ± 100 m 650 ± 100 m –

Fiber Color Coding

No. No. No. No. No. No.
1 White 5 Green 9 Orange 13 White + ring 17 Green + ring 21 Orange + ring
2 Red 6 Violet 10 Turquoise 14 Red + ring 18 Violet + ring 22 Turquoise + ring
3 Blue 7 Brown 11 Pink 15 Blue + ring 19 Brown + ring 23 Pink + ring
4 Yellow 8 Black 12 Grey 16 Yellow + ring 20 Black + ring 24 Grey + ring

73
 Belden IBDN Structured Cabling Systems • Belden IBDN FiberExpress Certified System Installations

Performance & Warranties Profile

for
Belden IBDN FiberExpress Certified System Installations
Belden will provide its authorized Certified System Vendors The repair or replacement of a defective component under this
(CSVs), for the benefit of their end users, with both an extended warranty includes the reasonable costs of labor required to repair
Belden IBDN Component Warranty and a lifetime Application or replace the defective component.The decision of repair or
Assurance Program for all Belden IBDN FiberExpress Certified replacement of components, and the selection of labor services
Systems installed by the CSV. to perform the repair or replacement are at the sole discretion
of Belden.
The extended Belden IBDN Component Warranty and the lifetime
Application Assurance Program are offered to the CSV by Belden,
in accordance with the following terms Application Assurance:
and conditions. In addition to the extended Belden IBDN Component Warranty,
This Warranty and this Assurance Program apply only to Belden Belden also provides a lifetime Application Assurance Program
IBDN FiberExpress Certified Systems installed by CSV acting as for all Belden IBDN FiberExpress Certified Systems.
an authorized Certified System Vendor (CSV) and in compliance Belden lifetime Application Assurance Program warrants
with the CSV Agreement. that the Belden IBDN FiberExpress Certified System, maintained
A Belden IBDN FiberExpress Certified System is a structured in accordance with the Belden IBDN User Guide in effect and
cabling system that has been engineered, designed and installed provided at the time of installation, will be capable of supporting
by the CSV acting as an authorized Belden CSV. The all industry standard Applications during its entire installation life
engineering, design and installation of the Belden IBDN System at its original installation location.
must be performed in accordance with all applicable Belden Industry standard Applications include;
IBDN guidelines, Belden IBDN practices, and other Belden IBDN
documentation in effect at the time of installation. Belden IBDN i) all Applications identified in the current (at time of installation)
FiberExpress System installations that meet these requirements Belden IBDN documentation, and;
will receive a Certification Registration Number and Certification ii) any commercially available Applications introduced
Plaque or Certificate from Belden and will then be designated at a future date that are designed to operate over
as a Belden IBDN FiberExpress Certified System, eligible for the ANSI/TIA/EIA-568-B.3 and ANSI/TIA/EIA-568-B.3-1
extended Belden IBDN Component Warranty and lifetime compliant optical fiber transmission channels.
Application Assurance Program described below.
In the event that the Belden IBDN FiberExpress Certified System
In order to maintain the validity of the extended Belden IBDN is unable to support an existing or future industry standard
Component Warranty and the lifetime Application Assurance Application as defined above, and such failure can be attributed
Program, the Belden IBDN FiberExpress Certified System must to a deficiency in the Belden IBDN System, Belden will
be maintained in accordance with the Belden IBDN User Manual provide at its expense, reasonable expertise, Belden IBDN materials
in effect at the time of installation. and labor as required to remedy the problem and/or resolve the
claim. The decision of repair or replacement of materials, and
the selection of labor services to perform the remedial services
Extended Belden IBDN Component Warranty: are at the sole discretion of Belden.

Belden warrants that;

i) the Belden IBDN passive components installed in the Belden Limitations
IBDN FiberExpress Certified System are covered by a Belden will not be liable for, nor pay for, any loss of use
manufacturer's warranty against defects in material and of the Belden IBDN System or products; costs of substitute goods,
workmanship for a period of twenty-five (25) years from the facilities or services; or for any other economic losses or incidental,
date of installation, at the original installation location. consequential or exemplary damages.
ii) the Belden IBDN FiberExpress Certified System will meet or This Extended Product Warranty and Application Assurance for
exceed the requirements specified by: the Belden IBDN Certified System does not cover any deficiencies
ANSI/TIA/EIA-568-B.1: Commercial Building Telecommunications in the System which result from failure to comply with Belden
design guidelines and installation procedures.
Cabling Standard, Part 1: General Requirements
Belden shall not be liable for damages or defects resulting
ANSI/TIA/EIA-568-B.3: Commercial Building Telecommunications
from circumstances beyond its control, including but not limited
Cabling Standard, Part 3: Optical Fiber Cabling
to, improper installation, misuse, alteration, unauthorized repair,
ANSI/TIA/EIA-568-B.3-1: Addendum 1 - Additional Transmission damages in transit, fire, floods and acts of God.
Performance Specifications for 50/125 µm Optical Fiber Cables
Repair or replacement of the Belden IBDN Certified System by
Once an installed Belden IBDN passive component has been Belden is your exclusive remedy.
deemed defective by Belden, Belden shall repair or replace, This is the only warranty on the Belden IBDN FiberExpress
at Belden's discretion, the defective component. The Certified System.There are no other warranties, express or implied,
repaired or replaced component will be warranted for made by Belden.
the balance of the original twenty-five year warranty period,
or, ninety (90) days, which ever is longer.

74
Our End-to-End Expertise.
Your End-to-End Solution.

Belden IBDN Structured Cabling Systems • Belden IBDN FiberExpress Certified System Installations

Belden IBDN FiberExpress Cabling Solution

In addition to the extended Belden IBDN Component Warranty, characteristics for the duration of their installed lifetime at the
the lifetime Application Assurance Program and full compliance original site of installation. All conditions regarding original design,
with ANSI/TIA/EIA-568-B Standards, Belden IBDN FiberExpress installation and maintenance for Belden IBDN FiberExpress
Certified Systems that conform with the Belden IBDN FiberExpress Certified Systems must be met in order to validate these optical
Certified System channel configuration shown below are performance characteristics.
guaranteed to provide the following optical performance
Belden IBDN Max. Channel Attenuation Max. Supportable Distance
FiberExpress (2 mated pair connector topology)
System 850 nm 1300 nm 850 nm 1300 nm
FiberExpress 300 (1) 62.5 µm multimode 3.2 dB 4.0 dB 300 m (985 ft) 550 m (1805 ft)
FiberExpress 600 (1) 50 µm multimode 3.9 dB 3.5 dB 600 m (1970 ft) 600 m (1970 ft)
FiberExpress 2000 (2) 50 µm multimode 2.6 dB — 300 m (985 ft) —
Singlemode (3) Loose tube — 4.7 dB — 5000 m (16,405 ft)
optical fiber cable
1) Budget and length limitations shown are for 1 Gb/s applications including 1000Base-SX and 1000Base- LX Gigabit Ethernet. Maximum channel attenuation and maximum channel length
limitations for other applications are specified in the Belden IBDN Optical Fiber Design in effect at the time of installation.
2) Budget and length limitations shown are for 10 Gb/s applications including 10Base-S Ethernet. If 10GBase-LX4 is used, the maximum channel attenuation is 2.0 dB and the maximum
channel length is 300 m (985 ft). Maximum channel attenuation and maximum channel length limitations for other applications are specified in the Belden IBDN Optical Fiber Design in
effect at the time of installation.
3) Singlemode tight buffer optical fiber cable is available; Budget and length limitations shown are for 1 Gb/s including 1000Base-LX Gigabit Ethernet. Maximum channel attenuation and
maximum channel length limitations for other applications are specified in the Belden IBDN Optical Fiber Design Guide in effect at the time of installation.

Belden IBDN FiberExpress System Channel Backbone Configuration

Telecommunications Room Backbone Cabling Telecommunications Room
FiberExpress FiberExpress
Patch Panel Patch Panel

FiberExpress Patch Cord FiberExpress Cable Series FiberExpress Patch Cord

* 2 mated pair connector channel topology

Belden IBDN FiberExpress System Channel Centralized / Horizontal Configuration

Work Area Centralized / Horizontal Telecommunications Room
Workstation Cabling
Outlet FiberExpress
Patch Panel

FiberExpress Patch Cord FiberExpress Cable Series FiberExpress Patch Cord

* 2 mated pair connector channel topology

Fiber Channel Topology

Belden IBDN Fiber-to-the-Desk Fiber Backbone Fiber Backbone FiberExpress
FiberExpress System Matrix (FTTD) &
Centralized Fiber
(In-Building) (Campus) Pre-terminated
Solutions*
FiberExpress Cables
Breakout & Distribution Cable Series: MM & SM ✓ ✓
Interconnect Cable Series: MM & SM ✓
Loose Tube (Campus) Cable Series: MM & SM, Composite MM/SM ✓ ✓
FiberExpress Ribbon Cable Series: MM & SM ✓ ✓ ✓ ✓
Cross-Connect Hardware in the Telecommunications Room
FiberExpress Manager with FiberExpress Manager Connector Modules: MM & SM ✓ ✓ ✓ ✓
FiberExpress Rack Mount Patch Panel with Universal Adapter Strips: MM & SM ✓ ✓ ✓
FiberExpress Wall Mount Patch Panel with Universal Adapter Strips: MM & SM ✓ ✓ ✓
FiberExpress Bar: MM & SM ✓ ✓ ✓ ✓
Patch Cords in the Telecommunications Room and at the Work Area
FiberExpress Patch Cords: MM & SM ✓ ✓ ✓ ✓
Outlets at the Work Area
MDVO Multimedia Outlets with MDVO Multimedia Modules ✓
MediaFlex Outlets with MediaFlex Inserts ✓
FiberExpress Bar: MM & SM (as MUTOA) ✓ ✓
Fiber Connectivity
2012/10

Optimax Connectors: MM & SM ✓ ✓ ✓

Epoxy Field Mountable Connectors: MM & SM ✓ ✓ ✓
Fiber Pigtails: MM & SM ✓ ✓ ✓

MM = Multimode SM = Singlemode
* FiberExpress Pre-terminated solutions provide simple-to-install, high performance fiber channels through custom length,
high precision factory terminated cables and matching optical connectivity components.

75
 GLOBAL LOCATIONS

For more information, please visit us at:

www.beldensolutions.com

EUROPE/MIDDLE EAST/AFRICA

Germany Russia The Netherlands

Phone: +49-7127-14-0 Phone: +7-495-787-06-55 Phone: +31-773-878-555
[email protected] [email protected] [email protected]
France Spain United Arab Emirates
Phone: +33-472-109-990 Phone: +34-91-746-17-30 Phone: +971-4-391-0490
[email protected] [email protected] [email protected]
Italy Sweden United Kingdom
Phone: +39-039-5965-250 Phone: +46-40-699-88-60 Phone: +44-161-49837-49
[email protected] [email protected] [email protected]

AMERICAS ASIA/PACIFIC

USA Singapore China

Phone: +1-800-BELDEN1 Phone: +65-6879-9800 Phone: +86-21-5445-2388
(1-800-235-3361) [email protected] [email protected]

IBDN is a registered trademark of Nordx/CDT which was acquired by Belden on February 2, 1996. Belden, Belden Sending All The Right Signals,
GarrettCom, Hirschmann, Lumberg Automation, Tofino Security, Tripwire and the Belden logo are trademarks or registered trademarks of Belden Inc. or
its affiliated companies in the United States and other jurisdictions. Belden and other parties may also have trademark rights in other terms used herein.

©Copyright 2017, Belden Inc. IBDN-FIBER-CONNECTIVITY-SOLUTIONS_CA_ECOS_BDC_0417_ENG