Plusdeck 2c User Manual
Plusdeck 2c User Manual
Plusdeck 2c User Manual
www.plusdeck.com
Introduction of Plusdeck
A product which enables all the Cassette Deck's function on PC.Operated all of functions
of cassette deck in PC
Now, you can listen all the PC sound from wherever you want
It's not permitted to change and copy the manual without previous agreement with
BTO Co.,Ltd
2
The parts
OS support
System requirements
SPEC
Size (W * H * D) 145 * 40 * 215
Tape Speed 4.75cm/sec
Wow & Flutter 0.09%(WRMS)
Frequency Response 30~18,000Hz
Separation 40dB
Signal-to-Noise Ratio 55dB
Power Supply DC 12V / DC 5V
3
2. Remove the front panel from the bay that will hold the
Plusdeck(In some cases, you may have to remove
the whole front panel from PC)
Installation of Software
To install software, insert included software diskette and run setup.exe on A drive
To run software, double click on icon of screen or select program on Start menu
Confirmation
It is correctly connected if you can hear sound from sound card and playback of Tape
If you can't listen any sound from PC, you may have disabled line-in input on sound control
or wrongly connected audio cables(7.)
Notice
If you register your Plusdeck product at www.plusdeck.com, you can get more information
and updated software for free.
6
Basic Function
Extra Function
Sound set-up
1. The recording quality of tape can be affected by volume of master and Line-input.
(The volume of speaker will not affect the recording quality of tape )
Before start important recording, please make sure you have set the optimal volume
set-up through the test.
- Double click on icon of speaker, then adjust the master volume and Line- input volume between
50 ~70% level.
- Too high or low volume on in/output could harm sound quality. The optimal setup of volume is varied
by PC or sound card.
8
(Ex: You should disable special 3D Effect, such as Stereo wide, and 3D depth.)
2. In case of some sound card, you may need to change sound card option to
prevent distort of recording sound.
(For more information, please visit our web site www.plusdeck.com.)
9
3. To convert sound from tape into digital file, you have to select Line-input as a recording
input (: Preference Record Select Line-input Check Adjusting recording)
TIP : If you set Windows sound setting as 'no sound', you can prevent accidentally recording
windows' sound effect on tape : Start Control panel Sounds and multimedia
10
How to use
Recording on a tape
Tip : Check: The function is to confirm the tape condition before recording. It also is
available to tape rewind and the volume check of record.
Option: Auto gap : Automatically insert 3 seconds mute between files
Save file list : Save selected file list into text file.
11
Tip : By pressing MP3 button, you can convert WAVE file into MP3 file
You can select bitrate of MP3 by clicking the right button of mouse
The function of Play is to listen to digital file.