Scribd
Upload
909 views2 pages

Guide-1 Ericsson Command

This document contains a series of commands and comments related to checking the status and configuration of mobile network equipment. It includes commands to check specific cells and channel groups, transmission checks, site information lookups, device and module checks, neighbor cell configuration, frequency and identification settings, cascade configuration, and GPRS parameters. The overall purpose seems to be testing and troubleshooting radio network equipment using these monitoring and configuration commands.

Uploaded by

Conyel Cabalatungan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
909 views2 pages

Guide-1 Ericsson Command

This document contains a series of commands and comments related to checking the status and configuration of mobile network equipment. It includes commands to check specific cells and channel groups, transmission checks, site information lookups, device and module checks, neighbor cell configuration, frequency and identification settings, cascade configuration, and GPRS parameters. The overall purpose seems to be testing and troubleshooting radio network equipment using these monitoring and configuration commands.

Uploaded by

Conyel Cabalatungan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

allip:alcat=ext; allip:alcat=proc; allip:alcat=apz; allip:alcat=power; allip:alcat=sw_dev; allip:alcat=io_dev; pwnsp:sdip=all; c7ltp:ls=all; dtstp:dip=all,state=abl; rasap; rlcrp:cell=all; !

Checks TRX of a specific cell and the channel group! RXtcP:MOTY=RXOTG; allip:alcat=apt,acl=a1; allip:prca=43,acl=a1; rxtcp:moty=rxotg,cell=aaaaaaa; rxtcp:mo=rxotg-bb; rxcdp:mo=rxotg-bb; rxasp:mo=rxotg-bb; rxmsp:mo=rxocf-bb; rxmfp:mo=rxocf-bb; !to check transmission! rxmop:mo=rxotg-162; rxapp:mo=rxotg-162; radep:dev=rblt2-364; ntcop:snt=etm2-1; dtstp:dip=rblt211; dtqup:dip=rbltff; !Gets site info! rxmop:mo=rxotg-bb; rxmop:mo=rxotrx-bb-bb; !checks channels in site and if it is active! rlslp:cell=xxxxxx; ! to check devices, modules and switches of a bsc! ntcop:snt=all; !gets sdcch! rlcfp:cell=xxxx; !TO check bsc! dtstp:dip=rttxx&rttxx; !dip reset! dtqsr:dip=rblt75,ses2,es2,sf; dtqsr:dip=rblt75,ses,es,sf; dtqsr:dip=rblt75,degr,sf; !Checks site Frequency, bcchno and bsic/cell id and neighbor type and ncomb/comb ! rldep:cell=xxxxxxx;

!Checks neighbors of a cell and its direction! rlnrp:cell=xxxxx,cellr=all,nodata; !gets TEI of site! rxmop:mo=rxocf-97; !Checks if site is in cascade! radep:dev=rblt-3504; ntcop:snt=etrblt-109; stdep:Dev=rblt-3489&&-3519; rxmdp:moty=rxots,dev=rblt-3496; rxapp:Mo=rxotg-48; rxapp:Mo=rxotg-54; !checks gprs! rlgrp:cell=aroxas; rrgbp; !check parameters! rlgsp:cell=aroxas;

You might also like