Scribd
Upload
7 views18 pages

Lecture 05 FM1

Uploaded by

shanibhai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views18 pages

Lecture 05 FM1

Uploaded by

shanibhai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Fluid

Kinematics

Dr. Zeeshan Asghar


[email protected]
Fluid Kinematics

Kinematics: Branch of science dealing with motion of particles without considering forces
causing the motion.
Focus on Fluid Mechanics: Velocity at any point in a flow field at any time is studied.
Importance of Velocity:
• Once velocity is known, pressure distribution can be determined.
• Forces acting on the fluid can be deduced.
Discussion: Methods for determining velocity and acceleration will be covered in this lecture
Methods for describing fluid motion

Two main methods:


Lagrangian Method:
• Follows a single fluid particle during its motion.
• Describes velocity, acceleration, density, etc., of the particle.
Eulerian Method:
• Describes velocity, acceleration, pressure, density, etc., at a point in the flow field.
• Commonly used in fluid mechanics.
Types of Fluid flow

Classification of Fluid Flow:


• Steady and unsteady flows
• Uniform and non-uniform flows
• Laminar and turbulent flows
• Compressible and incompressible flows
• Rotational and irrotational flows
• One, two, and three-dimensional flows
Steady and Unsteady Flows:

Steady Flow:
• Defined as the type of flow where fluid characteristics (velocity, pressure, density, etc.) at a point
do not change with time.
• Mathematically, for steady flow:

Unsteady Flow:
• Defined as the type of flow where fluid characteristics (velocity, pressure, density, etc.) at a point
change with time.
• Mathematically, for unsteady flow:
Uniform and Non-uniform Flows

Uniform Flow:
• Defined as the flow where the velocity at any given time does not change with respect to space (length or direction of the
flow).
• Mathematically, for uniform flow:

Non-Uniform Flow:
• Defined as the flow where the velocity at any given time changes with respect to space.
• Mathematically, for non-uniform flow:
Laminar and Turbulent Flows:

Laminar Flow:
• Fluid particles move along well-defined paths or streamlines.

• Streamlines are straight and parallel, and particles glide


smoothly over adjacent layers.

• Also known as streamline flow or viscous flow.

Turbulent Flow:
• Fluid particles move in a zig-zag manner.

• Formation of eddies causes high energy loss.


Laminar and Turbulent Flows:
Reynolds Number:
• Determines whether the flow is laminar or turbulent in a pipe.
𝑉𝑉𝑉𝑉
• Equation: Re = ν

• Where:
• D= Diameter of the pipe

• V = Mean velocity of flow in the pipe

• ν = Kinematic viscosity of the fluid

• Flow Classification by Reynolds Number:


• If Re<2000, flow is laminar.

• If Re>4000Re, flow is turbulent.

• For 2000≤Re≤4000, the flow is transitional.


Compressible and Incompressible flows
Compressible Flow:
• The density of the fluid changes from point to point.
• Mathematically, for compressible flow:
• ρ ≠ Constant

Incompressible Flow:
• The density of the fluid remains constant.
• Typically, liquids are incompressible, and gases are compressible.
• Mathematically, for incompressible flow:
• ρ = Constant
Rotational and Irrotational flows
Rotational Flow:

Fluid particles, while flowing along

streamlines, also rotate about their own axis.

Irrotational Flow:

Fluid particles, while flowing along

streamlines, do not rotate about their own axis.


One, Two and Three-Dimensional Flow
Rate of Flow or Discharge
Continuity Equation
It is based on the principle of conservation of mass.
For a fluid flowing through a pipe, the quantity of fluid per second is constant across all cross-
sections.
Consider two cross-sections of a pipe:
• V1 = Average velocity at section 1-1.
• ρ1​ = Density at section 1-1.
• A1 = Area of pipe at section 1-1.
• V2,ρ2,A2 are corresponding values at section 2-2.
• Rate of mass flow Qm1 at section 1-1 = 𝜌𝜌1𝐴𝐴1𝑉𝑉1
• Rate of mass flow Qm2 at section 2-2 = 𝜌𝜌2𝐴𝐴2𝑉𝑉2
• According to law of conservation of mass
• Qm1 = Qm2  𝜌𝜌1𝐴𝐴1𝑉𝑉1 = 𝜌𝜌2𝐴𝐴2𝑉𝑉2
• Then for incompressible fluids  𝐴𝐴1𝑉𝑉1 = 𝐴𝐴2𝑉𝑉2
Q1 = Q2
Time for a game
www.Kahoot.it
Continuity Equation Problem
The diameters of a pipe at sections 1 and 2 are 10
cm and 15 cm, respectively.
• Find the discharge through the pipe if the
velocity of water flowing through the pipe at
section-1 is 5 m/s.
• Determine also the velocity at section 2.

Q=?
V2 = ?
Continuity Equation Problem
A 30 cm diameter pipe, conveying water, branches into two pipes of diameters 20 cm and 15
cm, respectively.
• If the average velocity in the 30 cm diameter pipe is 2.5 m/s, find the discharge in this pipe.
• Also, determine the velocity in the 15 cm pipe if the average velocity in the 20 cm diameter
pipe is 2 m/s.
Continuity Equation Problem
Water flows through a pipe AB with a diameter of 1.2 m at a velocity of 3 m/s, and then passes
through a pipe BC with a diameter of 1.5 m. At point C, the pipe branches. Branch CD is 0.8 m
in diameter and carries one-third of the flow from AB. The flow velocity in branch CE is 2.5 m/s.
Find:
1.The volume rate of flow in pipe AB.
2.The velocity in pipe BC.
3.The velocity in pipe CD.
4.The diameter of pipe CE.

Q
Continuity Equation Problem
A 25 cm diameter pipe carries oil of specific gravity 0.9 at a velocity of 3 m/s at Section-1. At
another point in the pipe i.e., Section-2, the diameter is 20 cm.
Find:
• The velocity at Section-2 and the
• Mass rate of flow of oil

You might also like