Rolamentos para Bombas

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

EXPLORER

The new world standard


for endurance and performance
sealed spherical roller bearings
fluid machinery

The ECO line squeezes costs in screw pumps

Earlier the Dutch company tion, with bushings, was unsatisfact-


Operating conditions
Spaans Babcock used bushings in ory because of grease flushing
their screw pumps. There were a through seals and out into the Position: Lower position of
lot of problems with grease leak- pumped fluid. The need for con- screw pump shaft
age contaminating the environ- tinuous refill of grease caused high Bearings: BS2-2208-2CS,
ment and high operating costs. operating and grease costs. It was BS2-2214-2CS,
The company overcame these also necessary for the plant to be BS2-2217-2CS
hurdles by using SKF sealed monitored in order to avoid environ- Bearing load: Up to 45 kN
spherical roller bearings greased mental pollution. Other solutions Speed: 40 r/min
for life. The new ECO line, using with closed oil lubrication systems Operating
sealed bearings in the lower posi- were tried but nothing worked out temperature: –10 °C to +40 °C
tion of the screws has become a well. Lubrication: Greased for life
great success for the company. SKF sealed spherical roller bear-
ings were the natural solution. The
The screw pump rotates between 15 development resulted in the ECO
and 80 r/min and lifts the fluid from line, a range of sealed bearings in
the inlet level to the maximum the lower position of the screws.
pumping point with only a little use The bearings are greased for life
of energy. Spaans Babcock devel- and a grease pump is no longer ne-
oped the idea and have now manu- cessary. This means savings of
factured Archimedean screw pumps approximately 110 kg of grease and
for the last 100 years. The old solu- 1 500 kWh per year. There are also
maintenance savings since these
Sealed Explorer advantages
bearings only need to be checked
every fifth year. The trial period for
• Environmentally friendly – no the ECO line has been very success-
discharge of used grease into ful and has strengthened Spaans
the water Babcock’s leading position.
• Maintenance free
• Operating cost savings – min-
imum use of energy and grease
• Manufacturing cost savings –
no grease pump necessary The use of sealed bearings led to con-
• Easier and safer handling and siderable cost savings – e.g. reduced
mounting maintenance costs and eliminated
grease and grease pump costs.

This testimonial demonstrates the outstanding capabilities of SKF spherical roller bearings prior to the new Explorer execution. The customer should experience additional performance with the new Explorer series.

© SKF 2000
Publication 4982 E
www.skf.com R

You might also like