REMOVAL
REMOVAL
HINT:
· Use the same procedure for RHD and LHD vehicles.
· The procedures listed below are for LHD vehicles.
PROCEDURE
CAUTION:
Be sure to read Precaution thoroughly before servicing.
for Type A:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT
SYSTEMS>AIRBAG SYSTEM(for Type A)>PRECAUTION
for Type B:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT
SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be
required before disconnecting the cable from the
negative (-) battery terminal. Therefore, make sure to
read the disconnecting the cable from the negative (-)
battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR
INSTRUCTION>PRECAUTION
CAUTION:
· Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
disable the SRS system.
· If the airbag deploys for any reason, it may
cause a serious accident.
NOTICE:
When disconnecting the cable, some systems need to be
initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR
INSTRUCTION>INITIALIZATION
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M258.html Page 1 of 2
12/3/17, 12(13 am
Bolt
Connector
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M258.html Page 2 of 2