LE910R1

LTE Cat.1 bis 10/5

JUPITER SL868 V3 JUPITER SE868-A

GNSS Embedded

AVAILABLE FOR
Product Description EMEA
The LE910R1 is an industrial-grade, cost-optimized LTE Mobile network operators (MNOs) worldwide APAC
Cat 1 bis module. It is ideal for IoT applications that estimate they will continue to operate and support LATAM
need data and voice transmission, including devices LTE Cat 1 bis well into the 5G era. It is also the best
requiring full mobility throughout the extended fit for IoT deployments in regions where the new
European, LATAM and APAC regions. 3GPP cellular low-power wide-area (LPWA)
technologies are not yet activated.
LE910R1 supports 2G fallback and connecting devices
in remote areas where LTE networks have not yet Using a single antenna brings significant cost
rolled out and voice use cases in the absence of Voice savings compared to LTE Cat 1, which has two
over LTE (VoLTE). antennas. It allows overall device dimension
reduction, making it possible to serve IoT
LTE Cat 1 bis is a proven and affordable solution. It is applications with stringent size requirements.
suitable for IoT applications that need a smooth
migration from sunsetting 2G and 3G networks. This The LE910R1 is a member of Telit’s flagship xE910
module family. It delivers 4G radio access
standard is also ideal for use cases that require higher
technology in the 28.2 x 28.2 x 2.2 mm form
JUPITER SC872-A
performance compared to Cat M1 and NB-IoT in
terms of:
factor. The Telit xE910 unified form factor family
comprises 2G, 3G and 4G products that share a
• Data rate form factor and electrical and programming
• Latency interfaces. This allows developers to implement a
“design once, use anywhere” strategy.
GNSS
• Mobility
Embedded

• Voice suport
 LE910R1

Variants
LE910R1-EU LE910R1-EA LE910R1-EAG

Market EMEA EMEA, APAC EMEA, APAC

Frequencies

4G bands B1, B3, B5, B7, B8, B20, B28, B1, B3, B5, B7, B8, B20, B28,
B1, B3, B7, B8, B20, B28
(MHz) B38, B40, B41 B38, B40, B41

3G bands
- - -
(MHz)

2G bands B3, B8 B3, B8 B3, B8

(MHz)

GNSS - - Yes

Product Features Hardware and Electrical Specifications Data

• LTE FDD Cat 1 bis 3GPP Release 13 compliant • Dimensions 28.2 x 28.2 x 2.2 mm LTE Cat 1 bis
• Single LTE antenna • 181-pin LGA interface • Uplink up to 5 Mbps

• VoLTE support • 10 I/O ports (@ 1.8V), including • Downlink up to 10 Mbps

multifunctional I/Os
• SMS over IMS
• USB 2.0 HS Approvals
• Built-in UDP, TCP, PPP, HTTP, HTTPS, NTP,
FTP stack • UART • RED, UKCA, RCM, IMDA,
• IPv4/IPv6 stack • I2C GCF, DTAG

• Control via AT commands according to 3GPP • 1.8 V/3V SIM interface

• TS 27.005, 27.007 and Telit custom AT • Industrial temperature range:- 40° C to +85° C
commands
• REACH and RoHS compliant
• SIM application toolkit 3GPP TS 51.01
• Output power

- Class 3 (0.2 W, 23 dBm) @ LTE

• Supply voltage range:

- Nominal: 3.8 V dC

- Range: 3.4-4.2 V dC

QUESTIONS? VISIT WWW.TELIT.COM/CONTACT-US

Like Us on Facebook Follow Us on LinkedIn Follow Us on X Subscribe to Our Channel
[09.2024]

Telit Cinterion reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property
rights. The information contained herein is provided “as is.” No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of
this document. This document may be revised by Telit Cinterion at any time. For most recent documents, please visit www.telit.com.

Copyright © 2024, Telit Cinterion