Scribd
Upload
22 views2 pages

Stern Tube Oil Circulation Eng

Stern Tube

Uploaded by

Anurag Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views2 pages

Stern Tube Oil Circulation Eng

Stern Tube

Uploaded by

Anurag Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Stern tube

oil circulation
A new pump and filter unit solution
Stern tube oil treatment: Benefits at a glance
As part of our continuous
development and constant – Reduced operating and
optimization of propeller and maintenance costs
shaft systems – a new stern – Increased reliability and
tube pump and filter solution durability of oil system
has been launched. components
– Maximized long-term condition
and lifetime of the stern tube oil
– Efficient separation of oil ageing
products, solid particles and
water
– Minimal space requirement due
to compact design
– Very easy maintenance
– Filter elements with high
contamination retention
capacity
– Environmentally friendly element
disposal through incineration.

Propeller
aft ship
solutions
Stern tube oil circulation
with a new pump and filter unit solution

The pump and filter unit solution is our optional supply for
all MAN Alpha CP Propeller and FP Propeller stern tube
systems – running with mineral oils or biodegradable oils.
567 342

Technical data Pump and filter unit


Operating pressure (bar) max. 20
Suitable oil types Mineral and biodegradable oils
Fluid temperature range (°C) -30 to 80
Material of filter housing Aluminum

586
Filter housing volume (ltr) ~ 27
Weight, dry (kg) ~ 58
Degree of filtration (μm) 30
Flow rate (ltr per minute) 3
Power consumption (kW) (3 x 400 V, 50/60 Hz) 0.37

Secure lifetime of oil, seals and bearings


Proven principle Oil filtration

The offline filter unit solution is The stern tube lube oil is extracted
recognized worldwide as highly from the stern tube between the aft
efficient and delivering measurable bearing and the aft seal – and
customer benefits: Lower operating pumped through the filter for removal
and maintenance costs, increased of solid particles and water.
productivity and maximum life of The cleaned oil is returned to the
system components and oil. gravity tank securing the static
pressure in the stern tube system.

Efficient and compact


Installation
The filter unit is a stationary bypass
flow filter – optimized for the The handling and installation of pump
separation of oil ageing products, and filter units – including the pipe Oil extraction, cleaning and return principle
water and solid particles from the fitting – are made easy, since our
lubrication oils. Thanks to its compact MAN Alpha stern tubes of today are
construction, the filter unit is also ideal prepared with the necessary internal
for installations where space is limited. piping and external connections.

MAN Energy Solutions


Multi-level separation Monitoring 9900 Frederikshavn
Denmark
The filter elements used are specially As an optional solution our supply can P + 45 9620 4100
developed for the combined include a ‘Water in Oil Sensor’ with [email protected]
separation of miniscule size output to the monitoring and alarm [email protected]
particulate contamination, water and system. www.manalpha.com
oil-ageing products. www.man-es.com

All data provided in this document is non-binding. This data serves informational purposes only and is not guaranteed in any way. Depending on the subsequent specific individual projects, the
relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially
specific site and operational conditions. Copyright © MAN Energy Solutions. 3010-0395-00ppr August 2019. Printed in Denmark.

You might also like