SUPERCAST PC-With Estidama-01-06-23

Technical Submittal
SUPERCAST PC
Al Gurg Fosroc CO.LLC

P O Box 657, Dubai U.A.E.
Tel : 04 2039699, Fax : 04 2859649
www.fosroc.com
CONTENTS
section 1 Submission Summary

Company Introduction
ISO Certification
section 2 Trade License

Estidama Certificate
section 3 Technical Data Sheet

Method Statement
section 4 Material Safety Data Sheet
section 5 Independent Test Certification
section 6 Job references

Company Introduction
SUBMISSION SUMMARY
Summary
Fosroc’s range of products offer the following key advantages :
▪ Technology developed to match application criteria
▪ High durability - long service life
▪ Full compatibility between systems
▪ Excellent track record in middle east conditions
In terms of this submission, points of note include the following :
▪ Technical datasheet
▪ Independent test certificates
▪ Job references and approvals of previous applications
The other main benefits of choosing Fosroc include :
▪ Products manufactured by an ISO 9001, quality-assured manufacturer
▪ Full range of complimentary products to ensure a compatible system
▪ Products manufactured, and fully supported, locally in the UAE
▪ Experienced, local applicators available
▪ Additional training available for main contractor’s supervisory staff to ensure

that the correct installation techniques are observed throughout
constructive solutions
Al Gurg Fosroc
The company was founded as a joint venture in 1975 between HE Easa Saleh Al Gurg
and Fosroc International. Al Gurg Fosroc is the first construction chemicals company to
establish a manufacturing base in the region, and presently serves the markets of the
U. A. E., Kuwait, Bahrain, Oman and other Fosroc companies worldwide.
Fosroc is one of the world's leading manufacturers of advanced technology products for
the construction and refurbishment industries.
For over 45 years, Al Gurg Fosroc is widely recognised as the market leader in concrete
repairs and protection, in particular; and has built a substantial reputation in a wide
range of product fields: Admixtures - Concrete repair and protection - Joint fillers
and sealants -Waterproofing - Protective coatings - Surface treatments -
Waterstops - Grouts and anchors – Flooring – Electrochemical products and
services.
Fosroc's success is built on a powerful combination of market knowledge, technical
resource, manufacturing expertise and problem-solving capabilities. The company
follows a policy of detailed product research and development providing high quality
products and long-term solutions.
The company has been the first construction materials manufacturing company to
introduce specification and AutoCAD services.
Al Gurg Fosroc's products are guaranteed for quality, but they must be applied correctly
and consistently to benefit from a long service life. To ensure this success, Al Gurg
Fosroc has introduced a Contracts and Application Department. This ensures that the
technical product knowledge is transpired to the applicators and the availability of the
local technical support center ensures that the correct application techniques are
followed.
Al Gurg Fosroc's commitment to total quality management system had lead to ISO 9002
certification in December 1994 - the first construction chemicals company in the Gulf
region to achieve this prestigious award. To keep up with the present market demands,
Al Gurg Fosroc has chosen the policy of continuous improvement, which led to
ISO 9001:2015 certification.
Al Gurg Fosroc was awarded the ISO 14001 certification in 1996 making it the first
construction chemicals company and the third company in any sector in the Gulf region
to receive this award.
As a clear indication of continual improvement in safety, quality and environmental
standards, Al Gurg Fosroc was awarded the OHSAS 18001 certification in October
2004. Currently updated to ISO 45001:2018.
Al Gurg Fosroc has a state of the art production unit, which has an output exceeding
160,000 metric tons per annum.
www.fosroc.com
Al Gurg Fosroc LLC

Post Box 657, Dubai
United Arab Emirates telephone: fax: email:
(+9714) 2039699 (+9714) 2859649 [email protected]
www.fosroc. com
Registered Office: 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Estate, Rashidiya, Dubai
ISO Certificate
Trade License
‫رخصة صناعية‬
‫‪Industrial License‬‬
‫تفاصيل الرخصة ‪License Details /‬‬
‫‪License No.‬‬ ‫‪300142‬‬ ‫رقم الرخصة‬
‫شركة القرق فوسروك (ذ‪ .‬م‪ .‬م)‬ ‫اسم الشركة‬

‫‪Company Name‬‬ ‫(‪AL GURG FOSROC CO. )L.L.C‬‬
‫شركة القرق فوسروك (ذ‪ .‬م‪ .‬م)‬ ‫السم التجارى‬
‫‪Trade Name‬‬ ‫(‪AL GURG FOSROC CO. )L.L.C‬‬
‫‪Legal Type‬‬ ‫(‪Limited Liability Company)LLC‬‬ ‫ذات مسئولية محدودة‬ ‫الشكل القانونى‬
‫‪Expiry Date‬‬ ‫‪09/03/2024‬‬ ‫تاريخ النتهاء‬ ‫‪Issue Date‬‬ ‫‪30/10/1974‬‬ ‫تاريخ الصدار‬
‫® ‪D&B D-U-N-S‬‬ ‫‪561643177‬‬ ‫الرقم العالمي‬ ‫‪Main License No.‬‬ ‫‪300142‬‬ ‫رقم الرخصة الم‬
‫‪No.‬‬
‫‪Register No.‬‬ ‫‪41541‬‬ ‫رقم السجل التجارى‬ ‫‪DCCI No.‬‬ ‫‪10278‬‬ ‫عضوية الغرفة‬
‫الطراف ‪License Members /‬‬

‫الحصص ‪Share /‬‬ ‫الصفة ‪Role /‬‬ ‫الجنسية ‪Nationality /‬‬ ‫السم ‪Name /‬‬ ‫رقم الشخص‪No./‬‬
‫مدير ‪Manager /‬‬ ‫الردن ‪Jordan /‬‬ ‫منار صلح سعيد جمهور‬ ‫‪496716‬‬
‫‪MANAR SALAH SAID JAMHOUR‬‬
‫نشاط الرخصة التجارية ‪License Activities /‬‬

‫‪Adhesives Manufacturing‬‬ ‫صناعة مواد اللصق‬
‫‪Construction Chemicals Manufacturing‬‬ ‫صناعة المواد الكيماوية لغراض البناء‬
‫‪Insulation Materials Manufacturing‬‬ ‫صناعة المواد العازلة‬
‫‪Fire Resistant & Retardant Materials Manufacturing‬‬ ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
‫العنوان ‪Address /‬‬
‫‪Phone No‬‬ ‫‪971-4-6858606‬‬ ‫تليفون‬ ‫‪P.O. Box‬‬ ‫‪657‬‬ ‫صندوق بريد‬
‫‪Fax No‬‬ ‫‪971-4-2859649‬‬ ‫فاكس‬ ‫‪Parcel ID‬‬ ‫‪215-357‬‬ ‫رقم القطعة‬
‫‪Mobile No‬‬ ‫‪971-50-6407901‬‬ ‫هاتف متحرك‬ ‫البريد اللكتروني ‪Email /‬‬
‫ملك الشيخ مانع بن خليفه بن سعيد ال مكتوم ‪ -‬ام رمول ‪ P215-357UNIT7‬مستودع رقم‬
‫الملحظات ‪Remarks /‬‬

‫تغيير المدير ‪.10/3/2019‬‬
‫تم نقل الموقع بتاريخ ‪15/04/2019‬‬
‫(استيراد وتصدير) حسب انشطة الرخصه‬
‫‪Print Date‬‬ ‫‪10/03/2023‬‬ ‫‪12:45‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪14890100‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪( 6969‬دو‪/‬اتصالت) للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message )SMS(. Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 )Du/ Etisalat( to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا (‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬
‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
License no. 300142 300142 ‫رقم الرخصة‬
Membership no. 10278 10278 ‫رقم العضوية‬
Registration no. 41541 41541 ‫رقم السجل التجاري‬
Trade Name AL GURG FOSROC CO. (L.L.C) (‫ م‬.‫ م‬.‫شركة القرق فوسروك )ذ‬ ‫السم التجاري‬
Legal Status Limited Liability Company(LLC) ‫ذات مسئولية محدودة‬ ‫الشكل القانوني‬
Activity Insulation Materials Manufacturing ‫صناعة المواد العازلة‬ ‫نوع النشاط‬

Adhesives Manufacturing ‫صناعة مواد اللصق‬
Construction Chemicals ‫صناعة المواد الكيماوية لغراض البناء‬
Manufacturing ‫صناعة المواد المقاومة والمانعة لنتشار‬
Fire Resistant & Retardant ‫الحريق‬
Materials Manufacturing
Member Since 30/10/1974 30/10/1974 ‫تاريخ النتساب‬
Date of Issue 30/10/1974 30/10/1974 ‫تاريخ الصدار‬
Expiry Date 09/03/2024 09/03/2024 ‫تاريخ النتهاء‬

Estidama Material
submittal Questionnaire
Estidama Materials Questionnaire
REF: EST-AK-001
Product Name Fosroc Supercast PC

Product Description High performance pile top fairing grout and
cementitious void filler
Product Model Details --
Project Name P1944 HW2 Sports Hotel
Submission date 31/05/2023
Name/ Title of person providing information Afra Khalil
Contact information 04-2039699
✓
Credit and Details required by supplier/manufacture N/A
Applicability Yes/No
RE-R1 1. What is the Thermal conductivity of the element, LAB test required?
Thermal Blocks, 2.U-Value of the whole element (W/m2k)
Solid/Hollow 3. Glazing: • U-value without frame (NFRC or equivalent)?
Blocks,
Aluminum and • SHGC Value (NFRC or equivalent)? N/A
Glazing EIFS, • Overall u-value simulation report including frame (Aluminum, PVC
Roof Insulation, etc…) using WINDOWS software or equivalent?
& HVAC system • Number of section types?
4. COP efficiency? (AHRI test standards by an accredited lab)
RE-R2 Confirm energy meters have data logging facility/full compatibility with
BMS/CMS. N/A
RE-R3 1. All refrigerants installed in the project (ODP = 0)?
Refrigerants in 2. All gaseous fire suppression system installed in the project (ODP = 0)? N/A
AC, refrigerating
Units & Coolers
RE-4 Technical data sheet to confirm:
Only for Lifts • ‘idle/downtime’ features N/A
• regenerative drive system (buildings over three stories only)
•Use LED lighting and LCD display features.
RE-7 1. All refrigerants installed in the project GWP≤10.
Refrigerants & 2. All gaseous fire suppression system installed in the project GWP≤1. N/A
Fire suppresion
LBo-R3/RE-2 1.Test sheet to confirm (SRI≤29) - shading devices-
Solar 2. Test sheet to confirm (SRI≥78) -roofing material/roof paint -. Letter
reflectance Enclosed, TL-
index
AK-6914
SM-R1 1. Confirming no Asbestos Containing Material (ACMs) - YES Estidama
all Insulation 2. Chromated Copper Arsenate (CCA) – treated timber are included in supplier Enclosed
material used & order-NO (EST-AK-002)
External
Wooden (Only 3rd party Lab test report are accepted)
Structures
1. A. Confirm that all thermal insulation materials used in the project have
SM-1 (ODP = 0) and (GWP ≤5)
Page 1 of 4
all Insulation B. Confirm that any blowing agent used to manufacture the insulation N/A
material used product or to spray it in place have (ODP = 0) and (GWP ≤5)
2. Chlorine Free Materials
• Insulation (80% or more by surface area);
Continue to • Waterproofing sheets and membranes (50% or more by surface area);
SM-1 • External cladding (90% or more by surface area);
3.Confirm low toxicity materials: R-phrase attribution under EU Risk Phrases
(R-Phrases) listed in Annex III of EU Directives 67/548/EEC
SM-9 1. Location of manufacture – Dubai, UAE Estidama
All materials 2. Distance travelled and means of transport-<500 KMs Enclosed
Manufactured 3. Proof of Manufacture (required)-Estidama form enclosed (EST-AK-002)
Locally
1. Steel: Valid CARES certificate to be available. N/A
SM-10 2. Concrete (cast in Place)
Steel, concrete, Concrete Mix Design with Approx. quantity in Cum. To be made available.
Recycled
28 Day Strength (N/mm2
Aggregate used
Onsite ( Cement content (Kg/m3)
Structure , non- Cement content (Kg/m3)
Structure , base, Slag content (Kg/m3)
Sub-base &
Backfill )
3. Percentage of Recycled Aggregate used onsite (structure & non structure by
volume.
4. Percentage of Recycled Aggregate (base, sub-base or backfill
5. For other Materials:
% Post-Consumer recycled content
% Post-industrial content
Is the wood certified by one of the following: N/A

Forest Stewardship council (FSC)
SM-12 Prog.for the Endorsement of Forest Cert. Scheme (PEFC)
Canadian Standards Association (CSA)
Timber and Sustainable Forestry Initiative (SFl)
Composite
Wood including Malaysian Timber Certification Scheme (MTCS).
Temporary Information Source: Attach the following:
Construction • Chain of Custody certification from Manufacturer and their suppliers
Wood • Letters from suppliers confirming the breakdown as necessary)
• Does the product contain added urea-formaldehyde resins?
(Provide a supplementary statement as evidence of this) (UF resins un-
permitted)
1.Type of Material : (Adhesives/Sealant /Sealant Primer/ Indoor Aerosol
LBi-2.1 /Adhesive)
Any Adhesive 2.Where is it used : (Indoor /Outdoor /Both) N/A
And Sealant 3.Product VOC Content (g/L)
Used at Site
4. Allowable VOC limit (g/L) ( as specified by Estidama PBRS)
5. Information Source:
1.Type of Material : (Paint/ Coating/ anti-Rust Paint/ anti-Corrosive Paint
LBi-2.2 /Shellac/ Clear Wood Finish/ Floor Coating/ Seater / Stain ) N/A
Page 2 of 4
Any paints & 2.Where is it used : (Indoor /Outdoor /Both) N/A
Coating used at 3.Product VOC Content (g/L):
Site
4. Allowable VOC limit (g/L) ( as specified by Estidama PBRS):
5. Information Source:
1.Type of material : (Carpet / Carpet Cushion)
LBi-2.3 2.VOC Content of Carpet (g/L):
Any Tile, Carpet, 3. Does the product comply CRI Green Label Plus Testing Program?
Or any other 4.Information Source:
Flooring
Component 5. Type of Material (Gypsum board Panel/ Timber Veneer/Lay-in Metal N/A
Within panels )
The project 6. HF: Does the hard flooring comply with (FloorScore /Greenguardindoor Air
Quality Testing Program)
1.Pentachlorophenol (PCP) Content of Flooring (ppm)
LBi-2.3 2. Wood Products: Have the Wood Flooring products been tested, classified
Only for and appropriately marked according to the requirements of BS EN 14342:2005. N/A
Wooden 3. Does Wood Flooring Formaldehyde Content comply with class E1
Flooring
requirement? (Provide a supplementary statement as evidence of this)
LBi-2.4 1. Dose the Ceiling Systems comply with BS EN 13964:2004 sections 4.5 in
Only for Ceiling relation to asbestos (no asbestos)?
System 2. Does Ceiling System Formaldehyde Content comply with class E1 N/A
requirement?
LBi-6 Is the data sheet of electronic ballast attached (florescent lamp only)?
Lighting fixtures (Note: no incandescent lamp allowed) N/A
PW-R1-1 1. Is the manufacture information for fixture flow rate/kPa attached?
All Plumping 2. Is the pressure (bar) to L/min graph attached? N/A
Fixtures
Reviewed by Sustainability team
Status Name / Signature
Afra Khalil
Technical Support Engineer

31-05-2023
Date / Stamp
Page 3 of 4
Page 4 of 4
Ref: EST-AK-002
Date: 31/05/2023
PROJECT No.: P-1944

PROJECT NAME: HW2 – Sports Hotel
LOCATION: Hudariyat Island, Abu Dhabi, UAE
OWNER: M/s. Modon
PMC:M/s. Atkins
CONSULTANT: M/s. Atkins
ENABLING CONTRACTOR: M/s. Dutch Foundation Co. W.L.L
ESTIDAMA CERTIFICATE
We hereby confirm Volatile Organic Compound content, post & pre consumer recycled content,
Regional Content of Fosroc Supercast PC as follows:
Material Calculate Recycled Content Regional Content

Description d Pre- Post- Distance of site Distance of site from
VOC Consumer Consumer from source of manufacturing plant
content Content (%) Content (%) materials (Miles) of materials(Miles)
(g/l) as per Al Rashidiya Dubai to Al Rashidiya Dubai to HW2,
USEPA 24 HW2, Sports Hotel, Sports Hotel, AUH
Method AUH
(Sec 11.3.4)
Fosroc Supercast PC < 0.1 g/l NIL NIL <500 KMs <500 KMs
For and on behalf of Al Gurg Fosroc LLC
Afra Khalil
Technical support engineer
Al Gurg Fosroc Co. LLC

Post Box 657, Dubai telephone: fax: email:
United Arab Emirates (+9714) 2039699 (+9714) 2859649 [email protected]
www.fosroc.com Registered Office: 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Estate, Rashidiya, Dubai
Ref : TL-AK-6914
Date : 31st May 2023
PROJECT No.: P-1944

PROJECT NAME: HW2 – Sports Hotel
LOCATION: Hudariyat Island, Abu Dhabi, UAE
OWNER: M/s. Modon
PMC:M/s. Atkins
CONSULTANT: M/s. Atkins
ENABLING CONTRACTOR: M/s. Dutch Foundation Co. W.L.L
Subject: ACM / CCA Certificate – Fosroc Supercast PC
Dear Sir,
With reference to above subject, we would like to inform you that the Supercast PC does not contain
ACM (Asbestos containing material) and/or CCA (Chromate copper arsenate).
Should you need any further clarification, please feel free to contact the undersigned.
Best Regards
For Al Gurg Fosroc LLC,
Mostafa Abdine, MRSC.

Technical Manager
Disclaimer: Please note that this advice is given in good faith based on the information provided. Fosroc cannot accept responsibility for any problems
that may arise due to use of its products outside the scope of the standard guidelines on our Product Datasheets and Method Statements.
Al Gurg Fosroc Co. LLC

Technical data sheet
Fosroc Supercast PC constructive solutions
High performance pile top fairing grout and

cementitious void fille
Uses Instructions for use
Supercast PC is suitable for use where structural continuity Preparation

is required in the filling of voids, and is typically applied in the
Saw cut or cut back the extremities of the repair locations to
following situations :
a depth of at least 20 mm to avoid feather-edging and to
 Pile cap reprofilin provide a square edge. Break out the complete repair area to
a minimum depth of 20 mm up to the sawn edge.
 General void fillin
All surface laitence, dust and other contaminants should be
Advantages removed. Oil and grease deposits should be removed by
steam cleaning, detergent scrubbing or the use of a proprie-
 High performance - rapid strength gain allied with high
tary degreaser. The effectiveness of decontamination should
ultimate strength makes it ideal for structural repairs.
then be assessed by a pull-off test
 Easy to use - simple addition of water on site produces
Expose fully any corroded steel in the repair area and
highly fluid material for placement without vibration
remove all loose scale and corrosion deposits. Steel should
 Shrinkage compensated - can be poured or pumped be cleaned to a bright condition paying particular attention to
into restricted access areas with confidence the back of exposed steel bars.
Formwork
Description
The formwork should be rigid and tight to the substrate to
Supercast PC is supplied as a ready to use blend of dry
prevent grout loss. Use of silicone sealant, or similar, is also
powders and selected aggregates, which requires only the
advised around the edge of the formwork.
addition of clean water to produce a highly consistent, fluid
repair material suitable for void filling The internal faces of the formwork should be sealed, using
Reebol*† release agent, to ensure that water is not absorbed
Design criteria from the repair material by the formwork.
Supercast PC may be applied in sections of between 20 and The formwork should include suitable drainage outlets for
250 mm thick. Greater thicknesses may be achievable, pre-soaking and, when filling the repair ‘bottom up (e.g. soffi
depending upon repair configuration and location together repairs), should further include provision for air-venting to
with the volume of any reinforcing steel. In conditions at or release trapped air as pouring proceeds.
below the water table, use Supercast PC in conjunction with
There must be suitable access points to pour or pump the
Supercast EPT and/or Proofex membranes. Consult the
mixed material in place.
local Fosroc office for more informatio
Substrate priming
Properties
Several hours prior to placing, the prepared substrate should
The physical properties shown below were obtained under be saturated with clean water. Immediately prior to placing,
laboratory conditions at a water:powder ratio of 0.12, and any free water should be removed.
may vary in practice.
Alternatively, all prepared concrete substrates can be primed
Compressive strength : Tolerance (±10%) using Nitobond EP*†, a slow-setting epoxy bonding agent,
(BS EN 196 P1) : 25 N/mm2 at 1 day prior to the erection of formwork.
45 N/mm2 at 7 days
Mixing
75 N/mm2 at 28 days
Flexural strength : > 12 mpa at 28 days Care should be taken to ensure that Supercast PC is
(BS EN 196-1) thoroughly mixed prior to application. Supercast PC should
Permeability : < 10 mm be mixed mechanically in a forced action mixer, or using a
(BS EN 12390 P8) mixing vessel with slow speed drill (400/500 rpm) plus
Supercast PC
Fresh wet density : 2380 kg/m3 Fosroc Mixing paddle. Free fall mixers are not suitable.
Fosroc Supercast PC
Always add the powder to the water. Use 3litres of water for Estimating
mixing of a 25kg bag. Place the desired quantity of clean,
Supply
cool water into the mixer and, with the machine in operation,
Supercast PC : 25kg bags
add one full bag of Supercast PC and mix continuously for 3
to 5 minutes until a smooth, even consistency is obtained. Coverage / Yield
Placing Supercast PC : Approx. 1.2m2 per 25kg

bag(at 10mm thickness) (11.6 litres per 25kg bag)
The mixed material should be placed immediately and
continuously- mixing machine capacity and labour availability
must enable this to be achieved. Technical support
If placing by pump, standard concrete pumping techniques Fosroc offers a comprehensive technical support service to
should be employed. The line should first be ‘grouted with a specifiers, end users and contractors. It is also able to offe
cement slurry, prior to pumping the mixed material. on-site technical assistance, an AutoCAD facility and
dedicated specification assistance in locations all over the
Curing
world.
In areas where the applied Supercast PC will be receiving a
waterproofing treatment, such as pile caps, it is recommen - Storage
ed to be cured immediately after striking the formwork with
Supercast PC has a shelf life of 12 months if maintained in
Concure DPM*†. For other applications it is recommended to
dry storage conditions in unopened bags. This may be
use Rendercure*† or wet hessian for this purpose; which can
reduced to 4-6 months if stored in locations of high humidity.
be supplemented with polythene taped down at the edges
under harsh drying conditions.
Precautions
High temperature working
Health and safety
It is suggested that, for temperatures above 35°C, the
The use of protective clothing and barrier creams such as
following guidelines are adopted as good working practice:
Kerodex Antisolvent and Rozalex Antipaint is recommended.
(i) Store unmixed materials in a cool (preferably temperature Ensure adequate ventilation when handling Nitobond EP. If
controlled) environment, avoiding exposure to direct contact with skin occur, wash thoroughly with copious
sunlight. amounts of water. If irritation persist, seek medical attention
(ii) Keep equipment cool, arranging shade protection if immediately. Do not induce vomiting.
necessary. It is especially important to keep cool those
Fire
surfaces of the equipment which will come into direct
contact with the material itself. Supercast PC and Nitobond EP are non-flammable
(iii) Try to avoid application during the hottest times of the
day, and in direct sunlight.
(iv) Make sufficient material, pl t and labour available to
ensure that application is a continuous process.
* Denotes the trademark of Fosroc International Limited
(v) Water (below 20°C) should be used for mixing the grout
prior to placement.
†
See separate data sheet
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Offic
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: [email protected]
Al Gurg Fosroc LLC
Regional offic
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: [email protected]
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: [email protected]
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: [email protected]
Oman, Al Amana telephone: 24815080 fax: 24817554 email: [email protected]
www.fosroc.com
UAE/0322/20/I
Method statement
method statement constructive solutions
Supercast PC
Section A : General Comments
High temperature working
It is suggested that, for temperatures above 35ºC, the following guidelines are adopted as
good working practice:
(i) Store unmixed materials in a cool (preferably temperature controlled) environment, avoiding
exposure to direct sunlight.
(ii) Keep equipment cool, arranging shade protection if necessary. It is especially important to
keep cool those surfaces of the equipment, which will come into direct contact with the material
itself.
(iii) Try to avoid application during the hottest times of the day, arrange temporary shading as
necessary.
(iv) Make sufficient material, plant and labour available to ensure that application is a continuous
process.
(v) Use water (below 20ºC) for mixing the grout prior to placement.
Equipment
It is suggested that the following list of equipment is adopted as a minimum requirement
Protective clothing : Protective overalls

: Good quality gloves, goggles and face mask
Preparation equipment : Marker chalk or pen
: Disc cutter
: Electric/pneumatic breaker or hammer and chisel
: Wire brush
: Proprietary blasting equipment
Mixing equipment : Measuring jug
: 1 KW slow speed drill, 400 or 500 rpm
+ Fosroc MR4 mortar mixing paddle
+ suitably sized mixing vessel, for single bag mixing or
: Proprietary forced-action mixer, for multiple bag mixing
Application equipment : Formwork
: Pouring equipment
Application - points of note
Fosroc operates a policy to encourage the use, where possible, of approved or licensed applicators.
This ensures that repairs are completed satisfactorily so that the long-term performance of the
materials is assured. For contractors who wish to apply the materials themselves Fosroc is also able
to offer technical assistance and training, either on-site or at its Training Centre in Dubai
Al Gurg Fosroc
LLC
Section B : Application Method

1.0 Surface preparation
Attention to full and proper preparation of the substrate is essential for complete adhesion to the
substrate.
1.1 Fully clean the concrete pile and steel surfaces to remove laitence, the by-products of
corrosion and other contaminants.
1.2 Break out any loose concrete to reach a sound substrate.
2.0 Substrate priming – water

2.1 Priming with water should take place after erection of the formwork.
2.2 Several hours prior to placing the Supercast PC, the prepared concrete substrates should be
saturated, by filling the formwork with clean water. Immediately prior to application of
Supercast PC, any excess water should be removed via the drainage outlet, leaving the
substrate “saturated surface dry”.
3.0 Formwork
3.1 A circular formwork should be erected concentric to the pile with a gap as per the design
criteria.
3.2 The formwork should be rigid and tight to the blinding to prevent grout loss. Use of silicone
sealant, or similar, is also advised around the edge of the formwork.
3.3 The internal faces of the formwork should be sealed, using Reebol release agent, to ensure
that water is not absorbed from the repair material by the formwork
3.4 The formwork should include suitable drainage outlets for pre-soaking.
3.5 There must be suitable access points to pour the mixed material in place.
4.0 Mixing
4.1 It is essential that Supercast PC is thoroughly mixed and that powder is always added to the
water.
4.2 Water addition: 3 litres per 25kg bag
Measure out appropriate quantity of cool, potable water, into the mixing apparatus. (It is
suggested that the temperature of the water should not exceed 20ºC, so that the temperature
of the final mixed material is not greater than 30ºC).
4.3 With the mixing apparatus in operation add one full 20kg bag of Supercast PC and mix for 3 to
5 minutes until a smooth, even consistency is obtained
Page 2 of 3
5.0 Placing
5.1 Limits of the pour geometry should be in accordance with that laid down in the „Design criteria‟
section of the current product data sheet.
5.2 The material should be placed within 30 minutes of mixing, in order to gain the full benefits of
fluidity and expansion, which will fill all the voids.
5.3 Placement should be a continuous process, to avoid the formation of a „cold joint‟
6.0 Curing
6.1 Formwork should be left in place until the cured Supercast PC has reached a self-supporting,
compressive strength of 10 N/mm2, or as otherwise advised by the Engineer.
6.2 Immediately after the formwork has been struck, all exposed faces of the repair should be
thoroughly soaked with clean water to remove residual traces of the shutter release agent. The
exposed areas of Supercast PC should then be continuously cured with wet hessain for 72
hours.
6.3 At ambient temperatures above 30ºC supplementary curing in the form of polythene sheeting,
taped down at the edges, must be used.
7.0 Cleaning
7.1 Supercast PC should be removed from tools, equipment and mixers with clean water
immediately after use. Cured material can only be removed by mechanical means.
7.2 Nitobond EP can only be removed from tools and equipment using Fosroc Solvent 102.
Section C : Approval and variations

This method statement is offered by Fosroc as a „standard proposal‟ for the application of Supercast
PC. It remains the responsibility of the Engineer to determine the correct method for any given
application.
Where alternative methods are to be used, these must be submitted to Fosroc for approval, in
writing, prior to commencement of any work. Fosroc will not accept responsibility or liability for
variations to the above method statement under any other condition.
Page 3 of 3
MSDS
Revision date: 06/01/2016 Revision: 4 Supersedes date: 25/07/2010
SAFETY DATA SHEET

SUPERCAST PC
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier

Product name SUPERCAST PC
Product number 2412002AE1
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Cementitious Grouts
1.3. Details of the supplier of the safety data sheet

Supplier Al Gurg Fosroc LLC
PO Box 657
Dubai
United Arab Emirates
+ 971 4 2858606
1.4. Emergency telephone number

Emergency telephone +97142039699 (08:00 to 16:30) // +971506258232 (16:30 to 08:00)GMT+4
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture

Classification
Physical hazards Not Classified
Health hazards Skin Irrit. 2 - H315 Eye Dam. 1 - H318 Skin Sens. 1 - H317 STOT SE 3 - H335
Environmental hazards Not Classified
Human health Dust or splashes from the mixture may cause permanent eye damage. Dust may irritate the
respiratory system. Symptoms following overexposure may include the following: Coughing.
Dust has an irritating effect on moist skin. Prolonged contact with moist or wet product may
cause burns. Frequent inhalation of dust over a long period of time increases the risk of
developing lung diseases.
Environmental The product will harden into a solid mass in contact with water and moisture. The resultant
material is not biodegradable.
2.2. Label elements
Pictogram
Signal word Danger
Hazard statements H315 Causes skin irritation.

H335 May cause respiratory irritation.
H318 Causes serious eye damage.
H317 May cause an allergic skin reaction.
1/9
SUPERCAST PC
Precautionary statements P271 Use only outdoors or in a well-ventilated area.

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with national regulations.
Contains ORDINARY PORTLAND CEMENT, CALCIUM CARBONATE, SILICA SAND, Dune Sand
Supplementary precautionary P264 Wash contaminated skin thoroughly after handling.

statements P272 Contaminated work clothing should not be allowed out of the workplace.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a POISON CENTER/doctor.
P312 Call a POISON CENTER/doctor if you feel unwell.
P321 Specific treatment (see medical advice on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
2.3. Other hazards

This product does not contain any substances classified as PBT or vPvB.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
CEMENT POWDER 30-60%

CAS number: 65997-15-1 EC number: 266-043-4
Classification
Skin Irrit. 2 - H315
Eye Dam. 1 - H318
Skin Sens. 1 - H317
STOT SE 3 - H335
CALCIUM CARBONATE 10-30%

Classification Classification (67/548/EEC or 1999/45/EC)

Not Classified -
SILICA SAND 10-30%

CAS number: 14808-60-7
Classification
Eye Irrit. 2 - H319
STOT SE 3 - H335
2/9
SUPERCAST PC
Dune Sand 1-5%

Classification
STOT SE 3 - H335
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
SECTION 4: First aid measures
4.1. Description of first aid measures

Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Keep affected person under observation. Get medical attention. Show this Safety
Data Sheet to the medical personnel.
Ingestion Rinse mouth thoroughly with water. Give plenty of water to drink. Give milk instead of water if
readily available. Keep affected person under observation. Do not induce vomiting. If vomiting
occurs, the head should be kept low so that vomit does not enter the lungs. Get medical
attention immediately. Show this Safety Data Sheet to the medical personnel.
Skin contact Remove contaminated clothing immediately and wash skin with soap and water. Get medical
attention if irritation persists after washing.
Eye contact Do not rub eye. Rinse immediately with plenty of water. Remove any contact lenses and open
eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if irritation
persists after washing. Show this Safety Data Sheet to the medical personnel.
4.2. Most important symptoms and effects, both acute and delayed
General information Get medical attention promptly if symptoms occur after washing.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media

Suitable extinguishing media Use fire-extinguishing media suitable for the surrounding fire.
5.2. Special hazards arising from the substance or mixture

Specific hazards Water used for fire extinguishing, which has been in contact with the product, may be
corrosive.
5.3. Advice for firefighters

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Avoid inhalation of dust. Use work methods which minimize dust production. Avoid contact
with eyes and prolonged skin contact. For personal protection, see Section 8.
6.2. Environmental precautions

Environmental precautions Collect and dispose of spillage as indicated in Section 13. Do not discharge into drains or
watercourses or onto the ground.
6.3. Methods and material for containment and cleaning up
3/9
SUPERCAST PC
Methods for cleaning up For waste disposal, see Section 13. Collect powder using special dust vacuum cleaner with
particle filter or carefully sweep into suitable waste disposal containers and seal securely.
6.4. Reference to other sections

Reference to other sections See Section 12 for additional information on ecological hazards.
SECTION 7: Handling and storage
7.1. Precautions for safe handling

Usage precautions Good personal hygiene procedures should be implemented. Avoid generation and spreading
of dust. Avoid inhalation of dust. Avoid contact with eyes and prolonged skin contact.
Mechanical ventilation may be required. Change contaminated clothing.
7.2. Conditions for safe storage, including any incompatibilities

Storage precautions To be stored out of reach of children in its original packaging in a dry place. The product
contains less than 2 mg chromate/kg dry cement, and this limit will not be exceeded for 12
months from the packing date stated on the packaging. Seal opened containers and use up
as soon as possible
7.3. Specific end use(s)

Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure Controls/personal protection
8.1. Control parameters

Occupational exposure limits
CEMENT POWDER
Long-term exposure limit (8-hour TWA): WEL 10 mg/m³ inhalable dust
Long-term exposure limit (8-hour TWA): WEL 4 mg/m³ respirable dust
CALCIUM CARBONATE
Long-term exposure limit (8-hour TWA): WEL 4 mg/m³
SILICA SAND
Long-term exposure limit (8-hour TWA): WEL 0,1 mg/m³
WEL = Workplace Exposure Limit
Ingredient comments WEL = Workplace Exposure Limits
ORDINARY PORTLAND CEMENT (CAS: 65997-15-1)
DNEL Workers - Inhalation; Short term : 3 mg/m³
2,2-DIMETHYL 1,3-PROPANEDIOL (CAS: 126-30-7)
DNEL Workers - Inhalation; Long term systemic effects: 35 mg/m³

Workers - Dermal; Long term systemic effects: 10 mg/kg bw/day
General population - Inhalation; Long term systemic effects: 8.7 mg/m³
General population - Dermal; Long term systemic effects: 5 mg/kg bw/day
General population - Oral; Long term systemic effects: 5 mg/kg bw/day
PNEC - Fresh water; 5 mg/l

- Marine water; 0.5 mg/l
- STP; 20 mg/l
4/9
SUPERCAST PC
BASIC COPPER CARBONATE (CAS: 12069-69-1)
PNEC - Fresh water; 7.8 µg/l

- Marine water; 5.2 µg/l
- STP; 230 µg/l
8.2. Exposure controls
Protective equipment
Appropriate engineering Provide adequate ventilation. Avoid inhalation of dust. Observe any occupational exposure
controls limits for the product or ingredients.
Personal protection Personal protection equipment should be chosen according to the CEN standards and in
discussion with the supplier of the personal protective equipment. This product may present a
chromate (VI) allergy risk. It contains a chromate reducing agent, but users should wear
appropriate personal protective equipment.
Eye/face protection (conform EN 166) Wear tight-fitting, chemical splash goggles or face shield.
Hand protection Wear protective gloves. It is recommended that gloves are made of the following material:
Polyvinyl chloride (PVC). Rubber (natural, latex). The most suitable glove should be chosen in
consultation with the glove supplier/manufacturer, who can provide information about the
breakthrough time of the glove material. If signs of wear and tear are noticed then the gloves
should be replaced.
Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection
Hygiene measures This product contains silica sands.

The grain size distribution of silica sand present means that it is not classified as hazardous.
However, any respirable crystalline dust generated by secondary processing may may cause
health effects.
Prolonged and /or massive inhalation of respirable crystalline silica dust may cause lung
fibrosis, commonly referred to as silicosis. Principal symptoms of silicosis are cough and
breathlessness.
Occupational exposure to respirable crystalline silica dust should be monitored and controlled
Change contaminated clothing. When using do not eat, drink or smoke.
Respiratory protection Wear a respirator fitted with the following cartridge: Particulate filter, type P2. Wear a suitable
dust mask. (EN 149)
Environmental exposure Not available

controls
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties

Appearance Granules.
Colour Grey.
Odour Odourless.
Odour threshold Not available.
pH Not available.
5/9
SUPERCAST PC
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate Not determined.
Evaporation factor Not determined.
Flammability (solid, gas) Not determined.
Upper/lower flammability or Not determined.

explosive limits
Other flammability Not available.
Vapour pressure Not determined.
Vapour density Not determined.
Relative density 1.9 @ 20°C
Bulk density Not available.
Solubility(ies) Slightly soluble in water.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not determined.
Viscosity Not available.
Explosive properties Product is not explosive.
Explosive under the influence Not considered to be explosive.

of a flame
Oxidising properties Not available.
9.2. Other information

Other information No information available.
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity Reacts with: Acids. Water.
10.2. Chemical stability

Stability Stable at normal ambient temperatures. When stored under humid conditions, the chromate
neutralization will decrease. This product contains a chromate reducing agent to reduce the
risk of allergic dermatitis causes by chromium (VI). This product has a shelf life. If not stored
in accordance with packaging instructions (sealed and dry), there is an increased risk of the
presence of hexavalent chromate leading to an increased risk of an allergic reaction. The
product will harden into a solid mass in contact with water and moisture.
10.3. Possibility of hazardous reactions

Possibility of hazardous Does not decompose when used and stored as recommended.
reactions
10.4. Conditions to avoid
6/9
SUPERCAST PC
Conditions to avoid Water, moisture.
10.5. Incompatible materials

Materials to avoid Strong acids.
10.6. Hazardous decomposition products

Hazardous decomposition Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2).
products
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Inhalation Dust may irritate the respiratory system. Symptoms following overexposure may include the
following: Coughing.
Ingestion Not likely, due to the form of the product. Ingestion may cause severe irritation of the mouth,
the oesophagus and the gastrointestinal tract.
Skin contact Dust has an irritating effect on moist skin. Prolonged contact with moist or wet product may
cause burns.
Eye contact Dust or splashes from the mixture may cause permanent eye damage. Immediate first aid is
necessary.
Acute and chronic health Frequent inhalation of dust over a long period of time increases the risk of developing lung
hazards diseases.
Toxicological information on ingredients.
CEMENT POWDER
Acute toxicity - dermal
Acute toxicity dermal (LD₅₀ 2,000.0

mg/kg)
Species Rabbit
SECTION 12: Ecological Information
Ecotoxicity The product is not expected to be hazardous to the environment.
12.1. Toxicity
Ecological information on ingredients.
CEMENT POWDER
Acute toxicity - fish Not determined.
12.2. Persistence and degradability

Persistence and degradability The product is not biodegradable.
12.3. Bioaccumulative potential

Bioaccumulative potential Not available.
Partition coefficient Not available.
12.4. Mobility in soil

Mobility The product is not volatile but may be spread by dust-raising handling.
7/9
SUPERCAST PC
12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB This product does not contain any substances classified as PBT or vPvB.
assessment
12.6. Other adverse effects

Other adverse effects Not available.
SECTION 13: Disposal considerations
13.1. Waste treatment methods

Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority. Note that fully cured material is not considered as hazardous
waste.
Waste class Waste from residues: 17-09-03
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).
Road transport notes Not classified.
Rail transport notes Not classified.
Sea transport notes Not classified.
Air transport notes Not classified.
14.1. UN number
This Product is not classified as dangerous for transport
UN No. (IMDG)
UN No. (ICAO)
14.2. UN proper shipping name

14.3. Transport hazard class(es)

ADR/RID class
ADR/RID subsidiary risk
ADR/RID label
IMDG class
IMDG subsidiary risk
ICAO class/division
ICAO subsidiary risk
Transport labels
14.4. Packing group

ADR/RID packing group
IMDG packing group
ICAO packing group
8/9
SUPERCAST PC
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutant

No.
14.6. Special precautions for user

EmS
Emergency Action Code
Hazard Identification Number

(ADR/RID)
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk according to Not available.
Annex II of MARPOL 73/78
and the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), establishing a European Chemicals Agency, amending Directive
1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation
(EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives
91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
Guidance Workplace Exposure Limits EH40.

CHIP for everyone HSG228.
Approved Classification and Labelling Guide (Sixth edition) L131.
Safety Data Sheets for Substances and Preparations.
15.2. Chemical safety assessment

Not available.
SECTION 16: Other information
General information The user must be instructed in the proper work procedure and be familiar with the contents of
these instructions.
Revision date 06/01/2016
Revision 4
Supersedes date 25/07/2010
Hazard statements in full H315 Causes skin irritation.

H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
The information on this data sheet represents our current data and is reliable provided that the product is used under the
prescribed conditions and in accordance with the application specified on the packaging and/or in the technical guidance
literature. Any other use of the product which involves using the product in combination with any other product or any other
process is the responsibility of the user.
9/9
Test report
Job reference
Fosroc Job References | AGF
Marketing Department constructive solutions
SUPERCAST PC
Project Site Consultant/ Subcontractor/

No. Project Title Product Application Quantity Client Main Contractor Date
Category Location Specifier Applicator
Dubai Creek Engineering

Emaar Al Shirawi
1 Buildings Harbour - Creek Supercast PC Waterproofing 40000 M2 Dubai SSH Design Contracting December-2022
Properties Contracting
Beach Company (ECC)
Dewan General
Port de La Mer - La Meraas Al Shirawi
2 Buildings Supercast PC Waterproofing 15000 M2 Dubai Architects + Construction December-2022
Sirene Development Contracting
Engineers Company (GCC)
Al Kaabi Villas - BUNYAN AL

3 Buildings Supercast PC Waterproofing 5000 M2 Abu Dhabi Privet sector ---- ---- November-2022
Sector 25 KHALIJ
Piles Head Mokta

4 Buildings Palace of the Creek Supercast PC ---- Dubai Emaar ---- ---- September-2022
treatement
Al Kaabi Villas - Substructure AL Watad

5 Buildings Supercast PC 4500 M2 Abu Dhabi Private ---- Bunian AL Khaleej August-2022
Sector 25 waterproofing insulation
Construction and
Completion of 5 Mohamed Al
6 Buildings Supercast PC Waterproofing 330 piles Abu Dhabi Bainouna Al Eslah ---- April-2022
villas Sector E25, Kaabi
Abu Dhabi
Foundation
Residential
Waterproofing & Iacovou
7 Buildings Commercial Supercast PC 1800 M2 Oman Nama Al Duqm CPEC --- July-2021
Pile Top Construction
Building - 5 Floor
Waterproofing
Flooring - car
Shati Al Qurm Hotel
8 Buildings Supercast PC parking, Pile top re- 400 m2 Oman Eagle Hills DAR SSH Larsen & Toubro Abu Matar June-2021
project
profiling
Firas
Commercial Building Mr. Sultan Firas Engineering
Engineering Al Mihri Contracting
9 Buildings on Plot No. C40 - Supercast PC Waterproofing 3000 M2 Abu Dhabi Saif Sultan Al Consultancy June-2021
Consultancy Co. L.L.C
Sector E3 Awani L.L.C
L.L.C
Page 1 of 14
SUPERCAST PC

Proline JSCOM
JSCOM Real
10 Buildings G+12 Residential Supercast PC Waterproofing ---- Dubai Engineering CONTRACTING ---- May-2021
Estate
Consultants (L.L.C.)
Commercial Building
Hannover Asqlqln
Building- for Mr. Rashed
11 Supercast PC Pilehead --- Abu Dhabi --- Consulting Construction & --- October-2018
Commercial- Lahej Nasser Saeed
Engineers Development LLC
Al Mansouri, (ADCE)
Proposed
Commercial Building Bainona Frontier Works
Building-
12 for Mr. Saif Ahmed Supercast PC Supercast PC --- Abu Dhabi --- Engineering Organization Civil --- October-2018
Commercial-
Mohamed Majed Al Consultancy Contracting
Mheiri, (ADCE)
2B+G+14+R
Commercial &
Al Ajmi
Building- Residential Building
13 Supercast PC Pilehead treatment --- Dubai --- Engineering Frayland LLC --- September-2018
Housing- Flats on Plot. No 3261064
Consultants
at Jadaf, (Emerald
Properties LLC)
Reem Tower 2
Seector RS 3 Plot Pilehead Unii Construction
Building-
14 C30, C31, Reem Supercast PC treatment, raft and --- Abu Dhabi --- Engineering General Contracting --- September-2018
Housing- Flats
Island, (Albeed retaining wall Consultancy House Ltd
Group)
DIB (G+8P+14+R) Pile head Al Qabdah Global
Building-
15 Plot-2310131, Supercast PC treatment --- Dubai --- Arif & Bintoak Building Contracting --- April-2018
Commercial-
(Dubai Islamic Bank) substructure LLC
Page 2 of 14
SUPERCAST PC

Al Alandalus Tower
Residential Building
C,D,E,F,G & H with
Building- Complexed Car Pile cap reprofiling Engineering
Reem Capital
16 Housing- Park, Boundary Supercast PC and general viod --- Dubai --- Consultants --- April-2018
Contracting LLC
Housing Walls and Related filling Group (ECG)
Club House,
(Jumeirah Golf
Estate)
The One Hotel
2B+G+17 Typical
Building- Hotel Apartment Engineering
China Railway 18th
17 Commercial- Building on Plot Supercast PC Pilehead treatment --- Dubai --- Consultants --- December-2017
Bureau Group LLC
Hotel No.346-0152, Group (ECG)
(Sigma ll Ltd - The
First Group)
Mazaya Al Naser
Building- G + 5P + 15 Typical
18 Supercast PC Piletop reprofiling --- --- --- Engineering Engineering & --- April-2017
Housing- Flats Floor + 2 Pent House
Consultant Contracting
Building- Al Khail Avenue And
Dar Al Dhabi Contracting
19 Commercial- The Hotel, Supercast PC Pilehead treatment --- Dubai --- --- April-2017
Handasah LLC
Hotel (Jumeirah Village)
Proposed
G+1P+11+HC
Building-
20 Residential Building Supercast PC Pilehead treatment --- Dubai --- Mimar Kier ACC JV --- February-2017
Housing- Flats
on Plot No.35, Town
Square, (Nshmi)
Furnished
Apatrment Building
Mazaya
Building- (GR + 5 Park + HC
21 Supercast PC Pilehead treatment --- Sharjah --- Engineering Becon Construction --- January-2016
Housing- Flats + 14 Typ Floors),
Consultant
(Mr.Mohammad
Abdullatif Almanea)
Page 3 of 14
SUPERCAST PC

Al Meena
Residential &
Commercial Tower
Building- Dewan Arabian
on Plots C56, C57,
22 Commercial- Supercast PC Piletop --- Abu Dhabi --- Architects 7 Construction --- October-2015
C58 Sector E-14,
Mixed Use Engineers Company
(Foundation
Property
Management)
Emirates National Future

Building-
School Project - Architrctural Ghantoot Tpt & Gen
23 Education- Supercast PC Pilehead repair --- Abu Dhabi --- --- January-2015
MBZC, (Ministry of Engineering Cont Est
Schools
Presidential Affairs) Consultants
Sparkle Towers
Building- (3B+G+14/29-Roof) Concrete repair Sun Engineering &
24 Supercast PC --- Dubai --- Mimar --- November-2014
Housing- Flats at Marsa, (Tebyan material for pile Contracting
Real Estate)
Al Habtoor City
Building-
Residential
25 Housing- Supercast PC Pilehead treatment --- Dubai --- Atkins HLG --- August-2014
Development, (Al
Housing
Habtoor)
Abu Dhabi - Dubai
Transport- Road, E311
Ghantoot Tpt & Gen
26 Roadways- Package - A, Supercast PC Pilehead treatment --- Abu Dhabi --- Aecom --- April-2014
Cont Est
Motorway (Department of
Transport)
Al Suweidi Al Firas General
Building-
Al Basma English Engineering Contracting and
27 Education- Supercast PC Pilehead protection --- --- --- October-2013
School Consultants Maintenance
Schools
Bureau LLC Establishment
Building- Fairmont Hotel - Abu
Khatib &
28 Commercial- Dhabi, (Fairmount Supercast PC Pile waterproofing 6000 Bags Abu Dhabi --- Arabtec / PMC --- October-2013
Alami
Hotel Hote)
Page 4 of 14
SUPERCAST PC

Al Jazeera Tower
Al Suweidi
Building- Commercial Building
Engineering Ghantoot Tpt & Gen
29 Commercial- Construction, Supercast PC Pilehead treatment --- Sharjah --- --- July-2013
Consultants Cont Est
Shops (H.E.Dr.Mana Saeed
Bureau LLC
Al Otaiba)
Building- Dubai Opera House
30 Commercial- Downtown, (Emaar Supercast PC Pilehead reprofiling --- Dubai --- Atkins CCC --- January-2013
Shops Properties)
Contract No. N-
6462.A -
Building- Lahmeyer
400/132/33kV Grid
31 Industrial- Supercast PC Pilehead --- Abu Dhabi --- International Siemens --- April-2012
Station at Mahawi
Power Station
(Lot 1A & Lot 1E),
(Transco)
Building- New 400/132/33kV
Lahmeyer
32 Industrial- GIS Ajman Grid Supercast PC Grout for pilehead --- Ajman --- Areva T & D --- May-2011
International
Power Station Station, (Transco)
Ewan Consolidated
Presidential Palace -
Water- Marine- Architectural Conctractors
33 Abu Dhabi, Supercast PC Waterproofing 6880 Bags Abu Dhabi --- --- February-2011
Piers Engineering International
(Presidential Palace)
Consultancy Company (CCC)
Burj Dubai Concrete repair,
Building- 1000 25 Kg Saudi Bin Ladin
34 Development Plot Supercast PC bonding agent, Dubai --- --- May-2009
Housing- Flats Bags Group
35, (Emaar) pilehead treatment
Building-
Wadi Tower, (Union
35 Commercial- Supercast PC Pile treatment 100 Bags Dubai --- WSP Simlex --- March-2009
Properties)
Office
Building-
Mall of Arabia, (City
36 Commercial- Supercast PC 20000 Bags Dubai --- Dhabi Cont. --- December-2008
of Arabia)
Shops
Page 5 of 14
SUPERCAST PC

Wasit Road Concrete repair,

Transport- National
Development, pilehead 100 25 Kg
37 Roadways- Supercast PC Sharjah --- Contracting and --- December-2008
(Ministry of Work treatment, sealant, Bags
Others Transport Co.
Public & Housing) grout
Building-
Trump Tower,
38 Commercial- Supercast PC 4000 Bags Dubai --- Atkins Al Habtoor MR --- October-2008
(Nakheel)
Hotel
National Engineering
Building- Delta 1 & 2, (Delta Repairs, pileheaad
39 Supercast PC 500 Bags Dubai --- Engineering Contracting --- July-2008
Housing- Flats Properties) treatment
Bureau Company
Building- Al Habtoor
Al Ghurair Centre,
40 Commercial- Supercast PC 3000 Bags Dubai --- Engineering --- April-2008
(Al Ghurair)
Office Enterprises
R762 Dubai Bypass
Transport- 400 25 Kg Wade Adams
41 Phase lll - Al Qudra Supercast PC Bearing grout Dubai --- Wilber Smith --- April-2008
Bridges- Road Bags Contracting Co.
Bridge, (RTA)
Al Habtoor
Building- Jafza Convention
Pilehead 80000 Kilo Engineering
42 Commercial- Center, (Jebel Ali Supercast PC Dubai --- Arenco --- March-2008
waterproofing Gram(s) Enterprises,
Office Free Zone)
(Fosroc applicator)
Building- Regal Tower 2, Khatib &
43 Supercast PC 800 Bags Dubai --- Al Rajhi projects --- March-2008
Housing- Flats (Taamer) Alami
Khalid Port
Water- Marine- First 100 metre of 800 25 Kg China Harbour
44 Extension, (Ministry Supercast PC Sharjah --- --- --- February-2008
Sea defence the port Bags Engineering
of Public Works)
Building- Binary @ Business Dutco Balfour

45 Supercast PC In site 1000 Bags Dubai --- --- --- January-2008
Housing- Flats Bay, (Dubarch) Beauty
Transport-
R880 - Development Al Burj Wade Adams
46 Roadways- Supercast PC Pilehead reprofiling --- Dubai --- --- October-2007
of Mirdif Interchange Africon Jv Contracting Co
Motorway
Page 6 of 14
SUPERCAST PC

Building-
23 Marine, (Dubai Al Hamad
47 Commercial- Supercast PC 4000 Bags Dubai --- Halcrow --- October-2007
Select) Contracting Co.
Office
Own application -
buying on cash,
Building- Ajman Corniche 10 25 Kg
48 Supercast PC awaiting to Ajman --- --- Power Line Gulf --- October-2007
Housing- Flats Residence Bags
become account
holders
Building-
Emirates Park Hotel, Applicator pilecap 1750 25 Kg Multiplex (Round /
49 Commercial- Supercast PC Dubai --- --- --- September-2007
(Emirates Air Lines) repair Bags Eversendi)
Hotel
Development of
Transport- 800 25 Kg Wade Adams
50 Mirdif Interchange, Supercast PC Main contractor Dubai --- Al Burj Africon --- August-2007
Bridges- Road Bags Contracting Co.
(RTA)
Four Office
Building-
Buildings B+G+15 2000 25 Kg Al Hashemi Al Shafar General
51 Commercial- Supercast PC Main contractor Dubai --- --- June-2007
Dubai Studio City, Bags Consultant Contracting
Office
(Dubai Studio City)
Abraaj Al Raha
Building- Pile repair and 750 25 Kg Al Faraa Cont. Al
52 Development, (Aldar Supercast PC Abu Dhabi --- AGP --- May-2007
Housing- Flats general repairs Bags Ain
Properties)
Building- Subcontractor and
Ibis / Novotel, (Majid
53 Commercial- Supercast PC main contractor 25 Kg Bags Dubai --- --- Khansaheb --- April-2007
Al Futtaim)
Hotel with Fosroc
Building- The prism Tower,
35000 Kilo Dewan Al Commodore
54 Commercial- (Credo Investment Supercast PC Self application Dubai --- --- March-2007
Gram(s) Emara Contracting
Office FZE)
Building- Torch Tower, (Dubai

55 Supercast PC As a pile cap 1000 Bags Dubai --- ENB Al Hamad Contr. Co --- January-2007
Housing- Flats Properties)
Page 7 of 14
SUPERCAST PC

The specified
database lookup
Al Naboodah
generated more
Business Bay Phase Engineering
Transport- than 65000 bytes 100 25 Kg
56 1&2, (Dubai Supercast PC Dubai --- --- Services, (Halcrow --- January-2007
Tunnels- Road of results, which is Bags
Properties) Consulting
too large for notes
Engineers)
to handle in this
context
Dubai Contracting
Dubai Pearl
Building- Pile top treatment 3000 25 Kg Company, (Dubai
57 Development, Supercast PC Dubai --- Arif & Bintoak --- December-2006
Housing- Flats abd encapsulation Bags Contracting
(Dubai Media City)
Company)
Bur Dubai
Building-
Development Lake Repair mortars,
58 Commercial- Supercast PC 930 Bags Dubai --- --- --- --- November-2006
Hotel, (Emaar waterproofing
Hotel
Properties)
Building- Dubai Marina Mall &
Repair mortars,
59 Commercial- Hotel / Apartments, Supercast PC 7420 Bags Dubai --- --- --- --- November-2006
waterproofing
Hotel (Emaar Properties)
Pilehead
reprofiling, pile
head
Qatar Insurance waterproofing,
Building- Arab Gulf Housing &
Company Head Qtr basement joints, 8000 Kilo
60 Commercial- Supercast PC Qatar, Doha --- Engineering Construction --- November-2006
Building, (Qatar plaster additive, Gram(s)
Office Bureau Company
Insurance Company) plaster bonding
aid, tile adhesive,
tile grout, concrete
repairs
Two Towers - Dubai
Building- Grouts and
Plot No. C- 005-016
61 Commercial- Supercast PC anchors, 320 Bags Dubai --- --- --- --- November-2006
for Saif Bin Darwish,
Office waterproofing
(Saif Bin Darwish)
Page 8 of 14
SUPERCAST PC

Burj Views Plot 85 at

Building- Grouts and
Burj Dubai
62 Commercial- Supercast PC anchors, 700 Bags Dubai --- --- --- --- November-2006
Development,
(Emaar Properties)
Atlantis Project W-
Building-
19-101, Food &
63 Commercial- Supercast PC Waterproofing 120 Bags Dubai --- --- --- --- November-2006
Beverages Bldg
Shops
No.1, (Kezner Int'l)
Ajman - Court
Building-
Complex, (ministry 368 Square Al Bayaty Emirates Link
64 Housing- Supercast PC For pilehead Ajman --- --- November-2006
of Works Public & Metre(s) Consultant Maltauro
Communal
Housing)
Intern.
Jumeriah Lake
Building- Engineering
65 Tower Z Cluster, Supercast PC Manual 150 Bags Dubai --- Higgs & Hill --- November-2006
Housing- Flats Construction
(Higgs & Hill)
Group
16 Residential
Buildings at
Building- 2000 Pile Bainona & Al Seidco General
66 Mussaffa Abu Supercast PC For pile caps Abu Dhabi --- --- November-2006
Housing- Flats Caps Bayaty Contracting
Dhabi, (Mohd Bin
Zayed Abu Dhabi)
Atlantis - TjePalm
Building- Jumeirah Pack 2
67 Supercast PC Waterproofing 8295 Bags Dubai --- --- --- --- November-2006
Housing- Flats Royal Tower,
(Kezner Int'l)
Burj Residence Plot
Building-
68 44 Dubai, (Emaar Supercast PC Waterproofing 800 Bags Dubai --- --- --- --- November-2006
Housing- Flats
Properties)
Atlantis - The Palm
Building-
69 Jumeirah Water Supercast PC Waterproofing 4540 Bags Dubai --- --- --- --- November-2006
Leisure- Sports
Park, (Kezner Int'l)
Page 9 of 14
SUPERCAST PC

Hyder
Concrete Epc For Ruwas Target Eng & Const
300 25 Kg Consulting
70 Industry- Pre Industrial Area, Supercast PC Method statement Ruwais --- Co., (Target Eng & --- October-2006
Bags Middle East
Cast- Dry (Adnoc) Const Co.)
Limited
Dubai Sports City
Building- 62500 Kilo
71 Cricket Stadium S3, Supercast PC Self application Dubai --- GMP Int'l Alpine --- August-2006
Leisure- Sports Gram(s)
(DCA)
Building-
Private Villa Project, 1375 Kilo Al Faraa Cont. Al
72 Housing- Supercast PC Pilecap treatment Abu Dhabi --- --- --- March-2006
(Emke Group) Gram(s) Ain
Houses
Arabian
Building- Saba Tower, (Saba Waterproofing, 684 20 Kg Al Hawara
73 Supercast PC Dubai --- Construction --- September-2005
Housing- Flats Tower) repair Bags Consultant
Company
Building- Gajaria Tower at Pilecap and

2700 Kilo Bahrain,
74 Commercial- Senabis, (Gajaria Supercast PC basement --- Msceb AAA Homes WLL --- July-2005
Gram(s) Bahrain
Office Electronics) waterproofing
Pilehead
reprofiling, pile
head
Qatar Insurance waterproofing,
Building- Arab Gulf Housing &
Company Head Qtr basement joints, 8000 Kilo
75 Commercial- Supercast PC Qatar, Doha --- Engineering Construction --- June-2005
Building, (Qatar plaster additive, Gram(s)
Office Bureau Company
Insurance Company) plaster bonding
aid, tile adhesive,
tile grout, concrete
repairs
Swellable Arabian
Building- Al Mas Tower, 1450 25 Kg
76 Supercast PC waterbar, bonding Dubai --- W S Atkins Construction --- March-2005
Housing- Flats (Nakeel) Bags
agent Company
Engineering
Foundation and Saleh Abdulla
Building- Al Ansari Tower at 2280 Kilo Bahrain, Projects
77 Supercast PC piletop --- Kameshki --- June-2004
Housing- Flats Juffair, (Al Ansari) Gram(s) Bahrain Consultants
waterproofing Contracting
Office
Page 10 of 14
SUPERCAST PC

Hyder
7 Towers at Dubai
Building- 5000 20 Kg Consulting Dubai Civil
78 Marina, (Emaar Supercast PC Pile cap treatment Dubai --- --- September-2003
Housing- Flats Bags Middle East Engineering
Properties)
Limited
Building- own Town Centre, Golden

1100 20 Kg
79 Commercial- (Mr.Mon'd Omar Bin Supercast PC Piling Sharjah --- Planner Unec, (Unec) --- March-2003
Bags
Shops Haider) Consultant
Building- Al Buhaira Al Hamad Contr.

1100 20 Kg Khatib &
80 Commercial- Insurance Tower, (Al Supercast PC Pilehead repair Sharjah --- Co, (Al Hamad --- March-2003
Bags Alami
Stadia Buhaira Group) Contr. Co.)
Dubai Internet city
(Seimens Building), Al Shafar General
Building-
(Dubai Technology Contracting, (Al
81 Commercial- Supercast PC Pilehead treatment 500 Bags Dubai --- Dar --- January-2003
E Commerce & Shirawi Contracting
Office
Media Free Zone Co.)
Authority)
Emaar Properties,
Emirates Hills
Building- Development, Engineering
43000 Kilo Al Hashemi
82 Commercial- Planning Area, Supercast PC Pilehead treatment Dubai --- Contracting --- June-2002
Gram(s) Consultant
Hotel Apartments Company
Buildings, (Emaar
Properties)
Building- Borg Al Fateh
50400 Kilo Sudan,
83 Commercial- Project, (Borg Al Supercast PC New construction --- Borg Al Fateh CMC Di Ravenna --- June-2002
Gram(s) Khartoum
Office Fateh)
Building- Nour Al Shamessi Saeed & Sultan

Ceramic tile 350 20 Kg Khatib &
84 Commercial- Building, (Nour Al Supercast PC Sharjah --- lootah Co., (Saeed --- May-2002
adhesive Bags Alami
Banks Shamessi) & Sultan lootah Co.)
Al Hamad
Building-
Al Massood Tower, Waterstops and 650 20 Kg Contracting Co., (Al
85 Commercial- Supercast PC Sharjah --- Arenco --- May-2002
(Al Massood) foundations Bags Hamad Contracting
Stadia
Co.)
Page 11 of 14
SUPERCAST PC

Building- Al Shafar General

B+G+1, (Dubai 2700 Kilo
86 Commercial- Supercast PC Pilehead treatment Dubai --- Dar Co, (Al Shafar --- April-2002
Islamic Bank) Gram(s)
Shops General Co)
Madinat Jumerah
Resort Phase 1, Buhaleeba
Building-
Port of Entry Hotel 20000 Kilo Kayp Contracting LLC,
87 Commercial- Supercast PC Pilehead treatment Dubai --- --- March-2002
Project, (h.h Sheikh Gram(s) International (Al Shirawi
Hotel
Mohammad Bin Contracting Co)
Rashed Al Maktoum)
G+6 Storey
Building-
Buildings, Emirates 10000 Kilo Al Shafar Transport
88 Commercial- Supercast PC Pilehead treatment Dubai --- --- --- March-2002
Hills, (Emaar Gram(s) & Contracting Co
Office
Properties)
Hamriya
Transport- Interchange, 1000 Kilo
89 Supercast PC Piletop treatment Sharjah --- Halcrow Darwish, (Darwish) --- March-2002
Bridges- Road (Sharjah Gram(s)
Municipality)
The Green
Water- Waste
Community Phase 25500 Kilo Khatib & Obaidullah,
90 water- Supercast PC Dubai --- --- March-2002
1, (Dubai Investment Gram(s) Alami (Obaidullah)
Sewerage
Park)
Ceramic tile
Building- Saeed & Sultan
G+11 Buildings, (Al adhesive and 300 20 kg ARC
91 Commercial- Supercast PC Sharjah --- lootah Co., (Saeed --- January-2002
Mansoori) chemical resistant Bags Consultant
Banks & Sultan lootah Co.)
grout
Al Thani Tower,
Building-
(H.E.Sh.hamdam All Structure Khatib & Sun Eng. Contr.,
92 Commercial- Supercast PC 600 Bags Dubai --- --- December-2001
Bin Jassem Bin concrete Alami (Sun Eng. Contr.)
Stadia
Jaber Al Thani)
Building- Pilecap and
Al Hodaifi Tower, (Al 15400 Kilo Midmac Contracting
93 Commercial- Supercast PC basement Qatar, Doha --- --- --- November-2001
Hodaififi) Gram(s) Co.
Page 12 of 14
SUPERCAST PC

Al Maqatara /
Transport- Himeem Road Parkman China Harbour
5900 Kilo
94 Roadways- Contract 1, (Public Supercast PC Coating to bridges Abu Dhabi --- Consulting Engineering and --- August-2001
Gram(s)
Motorway Works Department Engineers Contracting Co
Abu Dhabi)
Building- Dubai Internet City -

Al Shafar General
95 Commercial- Phase 3, (Dubai Supercast PC Pilehead treatment 1465 Bags Dubai --- Arenco --- July-2001
Contracting
Office Internet City)
Bahrain Airport Duty
Building-
Free Shop - 1000 Kilo Bahrain, Ahmed Mansoor Al
96 Commercial- Supercast PC Pilehead treatment --- Msceb --- January-2001
Expansion, (Bahrain Gram(s) Muharraq Aali
Shops
Duty Free)
Building- Jumeriah Town
Pilehead treatment Cowi Al
97 Commercial- Center 2, (Abdul Supercast PC 2350 Bags Dubai --- Tranemirates Co --- November-2000
and waterstops Moayed
Shops Rahim Al Zarooni)
Mohd
Salahudin
Building- Sunni Waqf Dept - 10200 Kilo Charilaos
98 Supercast PC Conbextra PC Bahrain --- Consulting --- September-1999
Housing- Flats Twin Tower at Hoora Gram(s) Apostilides (Chapco)
Engineering
Bureau
Building- Al Asmani
6000 Kilo Adnan Al Shafar Technical
99 Housing- Residential Building - Supercast PC Conbextra PC Dubai --- --- October-1998
Gram(s) Safarini & Contracting
Houses Bur Dubai
Building- Tower Sharjah - Al Al Mawarid General

100 Supercast PC Reprofile 480 piles 50 Tonnes Sharjah --- Ajyad Const. --- 1999
Housing- Flats Buhaira Contracting
Building- Shk. Hamdan Bin

18000 Kilo
101 Historic Zayed Mosque Supercast PC Conbextra PC Al Ain --- PWD --- --- 1999
Gram(s)
Building Repair
Building-
Fertiliser Plant in 16000 Kilo
102 Industrial- Supercast PC Conbextra PC Abu Dhabi --- Municipality --- --- 1999
Abu Dhabi Gram(s)
Factory
Page 13 of 14
SUPERCAST PC

Building-
Park Plaza - Shk Khatib &
103 Commercial- Supercast PC Reprofile 600 piles 25 Tonnes Dubai --- D.C.C Arabtec --- 1998
Zayed Road Alami
Hotel
Building- Abdulla Al Sayak Al Najah
104 Supercast PC Reprofile 110 piles 8 Tonnes Sharjah --- Bain Dal Mark --- 1998
Housing- Flats Tower Engineering
Building- Al Thani Tower - Khatib &

105 Supercast PC Reprofile 275 piles 25 Tonnes Dubai --- Sun Engineering --- 1998
Housing- Flats Shk. Zayed Road Alami
Building- B+G+7 Building 3000 Kilo Adnan

106 Supercast PC Piletop reprofiling Dubai --- Al Shafar T + C --- 1998
Housing- Flats Tawi As Saigh Gram(s) Safarini
Building- HH Sh. Ahmed

30000 Kilo W Hussain +
107 Housing- Office + Residential Supercast PC Piletop reprofiling Dubai --- Al Shafar T + C --- 1998
Gram(s) Partners
Houses Building Al Hamriya
Page 14 of 14
Approvals

SUPERCAST PC-With Estidama-01-06-23

Uploaded by

Copyright:

Available Formats

SUPERCAST PC-With Estidama-01-06-23

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SUPERCAST PC-With Estidama-01-06-23

Uploaded by

Copyright:

Available Formats

Technical Submittal

Al Gurg Fosroc CO.LLC

section 1 Submission Summary

section 2 Trade License

section 3 Technical Data Sheet

section 4 Material Safety Data Sheet

section 5 Independent Test Certification

section 6 Job references

Fosroc’s range of products offer the following key advantages :

▪ Technology developed to match application criteria

▪ High durability - long service life

▪ Full compatibility between systems

▪ Excellent track record in middle east conditions

In terms of this submission, points of note include the following :

▪ Independent test certificates

▪ Job references and approvals of previous applications

The other main benefits of choosing Fosroc include :

▪ Products manufactured by an ISO 9001, quality-assured manufacturer

▪ Full range of complimentary products to ensure a compatible system

▪ Products manufactured, and fully supported, locally in the UAE

▪ Experienced, local applicators available

▪ Additional training available for main contractor’s supervisory staff to ensure

Al Gurg Fosroc LLC

‫شركة القرق فوسروك (ذ‪ .‬م‪ .‬م)‬ ‫اسم الشركة‬

‫الطراف ‪License Members /‬‬

‫نشاط الرخصة التجارية ‪License Activities /‬‬

‫الملحظات ‪Remarks /‬‬

Membership no. 10278 10278 ‫رقم العضوية‬

Registration no. 41541 41541 ‫رقم السجل التجاري‬

Activity Insulation Materials Manufacturing ‫صناعة المواد العازلة‬ ‫نوع النشاط‬

Member Since 30/10/1974 30/10/1974 ‫تاريخ النتساب‬

Date of Issue 30/10/1974 30/10/1974 ‫تاريخ الصدار‬

Expiry Date 09/03/2024 09/03/2024 ‫تاريخ النتهاء‬

Product Name Fosroc Supercast PC

Is the wood certified by one of the following: N/A

Technical Support Engineer

PROJECT No.: P-1944

Material Calculate Recycled Content Regional Content

For and on behalf of Al Gurg Fosroc LLC

Al Gurg Fosroc Co. LLC

PROJECT No.: P-1944

Subject: ACM / CCA Certificate – Fosroc Supercast PC

Mostafa Abdine, MRSC.

Al Gurg Fosroc Co. LLC

High performance pile top fairing grout and

Uses Instructions for use

Supercast PC is suitable for use where structural continuity Preparation

Placing Supercast PC : Approx. 1.2m2 per 25kg

High temperature working

Protective clothing : Protective overalls

Section B : Application Method

2.0 Substrate priming – water

Section C : Approval and variations

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product number 2412002AE1

1.3. Details of the supplier of the safety data sheet

1.4. Emergency telephone number

SECTION 2: Hazards identification