AMPro Sequencer:
1) Abstract:
1-1) Date and Time
Type Date Time
Report Date and Time(Gregorian): 2024/10/01 03:57:46.33 PM
1-2) Test Module
Name: AMT Sequencer Version: 22100901
Computer
User Name: a.ilkhani RDDEP
Name:
Equipment: AMT105 Serial Number: 98081280
2) Test Settings:
2-1) State Group:
State pickup droup
State type StepRamp StepRamp
Analog Output Mode Direct Direct
55.00 V 48.00 V
V L1-E: V L1-E 0.00 ° 0.00 °
50.00 Hz 50.00 Hz
0.000 V 0.000 V
V L2-E: V L2-E -120.00 ° -120.00 °
50.00 Hz 50.00 Hz
0.000 V 0.000 V
V L3-E: V L3-E 120.00 ° 120.00 °
50.00 Hz 50.00 Hz
0.000 A 0.000 A
I L1: I L1 0.00 ° 0.00 °
50.00 Hz 50.00 Hz
0.000 A 0.000 A
I L2: I L2 -120.00 ° -120.00 °
50.00 Hz 50.00 Hz
0.000 A 0.000 A
I L3: I L3 120.00 ° 120.00 °
50.00 Hz 50.00 Hz
Binary Output
Bin. Out 1 ShortCircuit ShortCircuit
Max. State Time 49.50 s 118.8 s
Trigger Termination Type TimeOut and Binary Input TimeOut and Binary Input
Trigger Logic Or Or
Binary Input
C1: Trip 0->1 1->0
Delay After Tr. 0.000 s 0.000 s
Trigger Logic Minimum
0.000 s 0.000 s
Time
3) Test Results:
3-1) Assessment:
3-1-1) Ramp Assessment
T Act.
Signal
Name Ramp Condition Signal Nom. Dev.- Dev.+ Act. Dev. Assessment T Act. Final
Type
Step
S1: C1: Trip V L1-E:
pickup Amplitude 50.80V 2.540V 2.540V 50.50V -0.59% Passed 32.72s 3.015s
pickup 0>1 V L1-E
S2: C1: Trip V L1-E:
droup Amplitude 53.34V 2.540V 2.540V 53.40V 0.11% Passed 89.13s 25.60ms
droup 1>0 V L1-E
Page 1 of 2 pages
3-2) Signal View
Page 2 of 2 pages
