RODECaster Pro II DataSheet V06

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

LOW

NOISE
HIGH
GAIN

REVOLUTION MIC, LINE & STUDIO-GRADE SMART ADVANCED


PREAMPSTM INSTRUMENT PROCESSING PADS CONNECTIVITY
INPUTS

ACOUSTIC & ELECTRICAL SPECIFICATIONS

Freq Range: Mic Inputs:


20Hz – 20kHz
Monitor Outputs:
20Hz – 20kHz

Microphone Input 4KΩ


Impedance:

Instrument Input 1MΩ


Impedance:
The RØDECaster Pro II is the ultimate audio solution for podcasters, streamers,
musicians and content creators. It features four high-quality Neutrik® combo Input Dynamic Range: 113dB
jacks for connecting both microphones and instruments, with ultra-low-noise, Preamplifier Gain 0 – 76dB
high-gain Revolution Preamps™ plus studio-grade APHEX® audio processing Range:
delivering superior sound quality. The nine channels – including six broadcast-
Equivalent Noise: -131.5dBV (A-weighted)
quality physical faders and three virtual faders – are individually assignable for
Line Output Maximum 4dBu
creating personalised mixer configurations to suit any recording setup. The eight
Level:
fully programmable SMART pads can be used for everything from triggering
sound and voice FX to activating mixer actions and sending MIDI commands. Headphone Output 250mW
Power:
Advanced Bluetooth® connectivity, dual USB-C interfaces, and Wi-Fi and
Ethernet connections offer unrivalled integration with computers, smartphones Power Requirements: 30W USB-C PD (15V, 2A)
and other devices. The RØDECaster Pro II is powered by a high-performance Analogue Audio Input 4 x combo jack inputs
quad-core audio engine, which delivers peerless processing power. It is also Connectivity: (microphone, line,
incredibly simple to use, with a large high-definition touchscreen and rotary instrument)
encoder for easy navigation, intuitive control over audio processing via VoxLab™, Analogue Audio Output 2 x balanced line output,
and professionally tailored presets. Connectivity: 4 x headphone output

• Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain) Bluetooth Connectivity: Bluetooth audio with
Music and Headset profile
• Four high-quality Neutrik combo inputs for connecting microphones and instruments
®
(wide band speech)
• Nine individually assignable channels with six broadcast-quality physical faders and three USB Interface 1: 1 x 2-in/16-out
virtual faders multichannel device, 1 x
2-in/2-out with mix-minus
• High-performance quad-core audio engine
USB interface 2: 1 x 2-in/2-out with mix-
• Studio-grade APHEX® audio processing and on-board effects minus
• Eight fully programmable SMART pads with bank switching Bit Depth: 24bit

• Dual USB-C interfaces and advanced Bluetooth connectivity


®
Sample Rate: 48kHz

• Multitrack or stereo recording to a microSD card, USB storage device or computer



Recording Storage: microSDHC, microSDXC,
USB-C removable drive
• Four high-quality headphone outputs and ¼-inch balanced line outputs (exFAT – minimum
100MB/s)
• 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy
navigation and control Data transfer: USB 3.0 SD card reader
130MB/s

Network connectivity: Wifi 802.11g/n/ac 2.4GHz


and 5GHz, Ethernet
100/1000

OS Requirements – macOS 10.15 or later,


270mm Windows 10 Version 1803
or later, Windows 11
15V 2A
USB PD

Internal Storage 4GB (SMART Pads)

305mm

15V 2A
USB PD

rode.com

You might also like