[ AutoCAD - Thu Dec 09 16:12:45 2021 ]----------------------------------------

Customization file loaded successfully. Customization Group: ACAD

Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: MODELDOC
Customization file loaded successfully. Customization Group: EXPRESS
Customization file loaded successfully. Customization Group: APPMANAGER
Customization file loaded successfully. Customization Group: FEATUREDAPPS
Regenerating model.

AutoCAD menu utilities loaded.*Cancel*

Command: *Cancel*
_RIBBON
*Cancel*
COMMANDLINE

Command:

Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: S STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: *Cancel*

Command: LOGFILEON

Command: LOGFILENAME

LOGFILENAME = "C:\Users\Client\AppData\Local\Autodesk\AutoCAD 2019\R23.0\enu\

Drawing1_1d3abb828.log" (read only)
Command:
Enter new value for WSCURRENT <"3D Modeling">:

Command:
WSCURRENT

Enter new value for WSCURRENT <"Drafting & Annotation">: *Cancel*

Command:
Command:
Command:
Command:

Command:
Command:

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V

Specify through point:

Specify through point: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: H

Specify through point:

Specify through point: *Cancel*

Command: *Cancel*

Command: SNAPSTYL

Enter new value for SNAPSTYL <0>: 1

Command: <Isoplane Top>

Crossing Lasso Press Spacebar to cycle options
Command: <Isoplane Right>
Command: <Isoplane Left>
Command: <Isoplane Top>
Window Lasso Press Spacebar to cycle options
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: -DWGUNITS
Loading AEC Base...
Loading AEC Base Extended...
Loading AEC Core...

Drawing units:
1. Inches
2. Feet
3. Millimeters
4. Centimeters
5. Decimeters
6. Meters
Unit for length <1>: 1

Drawing unit display formats:

1. Scientific
2. Decimal
3. Engineering
4. Architectural
5. Fractional
Linear display format <2>: 1

Linear display precision <4>: 0

Scale objects from other drawings upon insert? [Yes/No] <Yes>: n

Match INSUNITS to drawing units? [Yes/No] <Yes>: n

Command:
Command: _.erase 1 found

Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:
Command:
Command:
Command:
Command:

Command:

Command:

Command: ADC
ADCENTER
Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _bedit
Command: <Coords off>
Command: -DWGUNITS

Drawing units:
1. Inches
2. Feet
3. Millimeters
4. Centimeters
5. Decimeters
6. Meters
Unit for length <1>: 1

Drawing unit display formats:

1. Scientific
2. Decimal
3. Engineering
4. Architectural
5. Fractional
Linear display format <1>: 2

Linear display precision <0>: 0

Scale objects from other drawings upon insert? [Yes/No] <No>: n

Match INSUNITS to drawing units? [Yes/No] <No>: n

Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _.erase 2 found

Command: ADC

Command: acdcinsertblock

Duplicate block definitions will be ignored

Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]:

Command:
Command:
Command:

Command:
Command:
Command:
Command: _.erase 1 found

Command: ADC

Command: acdcinsertblock

Duplicate block definitions will be ignored

Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]:

Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*

Command:
Command:
Command:
Command:
Command:
Command: _bedit
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: EXPLODE
1 found

Command:
Command: _.erase 1 found

Command:
Command: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:
Command:
Command:
Command:
Command:
Command:
Command: J
JOIN 6 found

4 objects converted to 1 polyline, 2 objects discarded from the operation

Command:
Command:
Command:
Command: *Cancel*

Command:
Command:
Command:
Command: j
JOIN 3 found

0 objects joined, 3 objects discarded from the operation

Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command:
Command:
Command: '_.quickproperties
Command:
Command:

Command:
Command:
Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command: *Cancel*

Command: _u LINE
Command: L
LINE
Specify first point:
Specify next point or [Undo]: <0
Angle Override: 0.00

Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command: ADC

Command:
Command:
Command:
Command:
Command:
Command: _.erase 1 found

Command: ADC

Command: acdcinsertblock

Duplicate block definitions will be ignored

Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]:

Window Lasso Press Spacebar to cycle options
Command:
Crossing Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command:
Command: SCALE
1 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Command:
Command:
Command:
Command: _bedit
Command:
Command:
Command:

Command:
Command:
Command:
Command: EXPLODE
1 found

Command:
Command:
Command:
Command: _.erase 3 found

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*

Command:
Command:
Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Command:
Command:
Command:
Command:
Command:
Command: J
JOIN 8 found

6 objects converted to 2 polylines, 2 objects discarded from the operation

Command:
Window Lasso Press Spacebar to cycle options
Command: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:
Command:
Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: <0
Angle Override: 0.00

Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command:
Command:

Command:
Command:
Command:
Command: LENGTHEN
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 2
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 2
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 2
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: *Cancel*

Command:
Command: LEGACYCTRLPICK

Enter new value for LEGACYCTRLPICK <2>: _u

Requires an integer between 0 and 2.

Enter new value for LEGACYCTRLPICK <2>: *Cancel*

Command: LENGTH
DIST
Specify first point: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 2
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 2
Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command:
Command: _.erase 1 found

Command: L
LINE
Specify first point:
Specify next point or [Undo]: <0
Angle Override: 0.00

Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: D'_NAVSWHEEL Unknown command "D'_NAVSWHEEL". Press F1 for help.

Command: -DWGUNITS
Drawing units:
1. Inches
2. Feet
3. Millimeters
4. Centimeters
5. Decimeters
6. Meters
Unit for length <1>: 1

Drawing unit display formats:

1. Scientific
2. Decimal
3. Engineering
4. Architectural
5. Fractional
Linear display format <2>: 3

Linear display precision <0>: 2

Scale objects from other drawings upon insert? [Yes/No] <No>: n

Match INSUNITS to drawing units? [Yes/No] <No>: n

Command: L
LINE
Specify first point:
Specify next point or [Undo]: <0
Angle Override: 0.00

Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.50"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.38"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.38"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: *Cancel*

Command: _u LENGTHEN
Command:
Command: _.erase 1 found

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.50"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 2.5

Specify next point or [Undo]: *Cancel*

Command: ADC

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: Duplicate definition of block Valve - Gate flanged ignored.

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00
1 found

Specify base point:

Specify rotation angle or [Copy/Reference] <0.00>:
Command:
Command: EXPLODE
1 found
Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:
Command:
Command:
Command:
Command:
Command: J
JOIN 6 found

4 objects converted to 1 polyline, 2 objects discarded from the operation

Command:
Command:
Command:
Command: SCALE
3 found
Specify base point:
Specify scale factor or [Copy/Reference]:
Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: _.erase 1 found

Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: _.erase 1 found

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:

Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel*

Command: l
LINE
Specify first point:
Specify next point or [Undo]: 1

Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 2.75

Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-2.75"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: ADC

Command: Duplicate definition of block Elbow - Outlet Down flanged ignored.

Command:
Command:
Command:
Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00
1 found

Specify base point:

Specify rotation angle or [Copy/Reference] <90.00>: <0

Command:
Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00
1 found

Specify base point:

Specify rotation angle or [Copy/Reference] <0.00>:
Window Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command:
Command: EXPLODE
1 found

Command:
Command: _.erase 1 found

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-2.75"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.25

Specify next point or [Undo]: *Cancel*

Command: ADC

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point: *Cancel*

Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: _u LINE
Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-0.02"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command:
Command: MI
MIRROR 1 found
Specify first point of mirror line:
Specify second point of mirror line: <0
Angle Override: 0.00

Specify second point of mirror line: *Cancel*

Command: _u MIRROR
Command:
Command: MI
MIRROR 1 found
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] <No>: N

Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Crossing Lasso Press Spacebar to cycle options
Crossing Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: <Isoplane Right>

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: H

Specify through point:

Specify through point: *Cancel*

Command: Regenerating model.

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1

Specify next point or [Undo]: <90

Angle Override: 90.00

Specify next point or [Undo]: 1

Specify next point or [Close/Undo]: *Cancel*

Command: ACDCATTEDIT

Command: ADC

Command: Duplicate definition of block Valve - Gate flanged ignored.

Command:
Command:
Window Lasso Press Spacebar to cycle options
Command: *Cancel*

Command:
Command: EXPLODE
1 found
Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: l
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Window Lasso Press Spacebar to cycle options

Command: J
JOIN 6 found

4 objects converted to 1 polyline, 2 objects discarded from the operation

Command: *Cancel*

Window Lasso Press Spacebar to cycle options

Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00
3 found

Specify base point:

Specify rotation angle or [Copy/Reference] <90.00>:
Crossing Lasso Press Spacebar to cycle options
Command:
Command:
Command:
Command:
Command: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Command: *Cancel*

Command: _u LENGTHEN
Command: _u INTELLIZOOM
Command: _u DROPGEOM GROUP
Window Lasso Press Spacebar to cycle options
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command:
Command:
Command: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:
Command:

Command:
Command:
Command: _u DROPGEOM GROUP
Crossing Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command:
Command: L
LINE
Specify first point: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: <90
Angle Override: 90.00

Specify next point or [Undo]: 1.25

Specify next point or [Undo]: *Cancel*

Command: ADC

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: Duplicate definition of block Elbow - 90 degrees flanged ignored.

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.25"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command: *Cancel*

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command:
Command:

Command:
Command: *Cancel*

Command: _u INTELLIZOOM INTELLIZOOM

Command: _u INTELLIZOOM INTELLIZOOM
Command: _u LENGTHEN
Command: _u DROPGEOM GROUP
Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 GROUP DROPGEOM
Command:
Command: *Cancel*

Command:
Command:
Command:
Command: *Cancel*

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.25"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command:
Command: EXPLODE
1 found

Command:
Command: _.erase 1 found
Command:
Command: *Cancel*

Command:
Command: _.erase 1 found

Command: ADC

Command: Duplicate definition of block Valve - Check flanged ignored.

Command:
Command:
Command:
Command: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Command: SCALE
1 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Command:
Command:
Command:

Command:
Command:
Command:
Command: SCALE
1 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Command:
Command: EXPLODE
1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: J
JOIN 9 found

7 objects converted to 2 polylines, 2 objects discarded from the operation

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command:
Window Lasso Press Spacebar to cycle options
Command: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:
Command:

Command:
Command: *Cancel*

Command:
Command: _u DROPGEOM GROUP
Window Lasso Press Spacebar to cycle options
Command:
Command:
Command:

Command:
Command:
Command:
Command:
Command:

Command:
Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ... 1 found

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Command: *Cancel*

Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel*

Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel*

Command:
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: T
MTEXT
Current text style: "Standard" Text height: 0.20" Annotative: No
Specify first corner: T

Invalid point.
Specify first corner: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: TR

*Invalid selection*
Expects a point or
Window/Last/Crossing/BOX/ALL/Fence/WPolygon/CPolygon/Group/Add/Remove/Multiple/
Previous/Undo/AUto/SIngle
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite
corner: *Cancel*

Command: tr
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Does not intersect with the cutting edge.

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command: *Cancel*

Command: L
LINE
Specify first point:

>>Press ESC or ENTER to exit, or right-click to display shortcut menu.

Resuming LINE command.

Specify first point:

Specify next point or [Undo]: 1.5
Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*

Command: ADC

Command: Duplicate definition of block Elbow - Outlet Down flanged ignored.

Command:
Command:
Command:
Command: R
REDRAW
Command: *Cancel*

Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00

Select objects: 1 found

Select objects: 1 found (1 duplicate), 1 total

Select objects:

Specify base point:

Specify rotation angle or [Copy/Reference] <90.00>:
Command:
Command:
Command:
Command: _bedit
Command:
Command:
Command:

Command:
Command:
Command:
Command: SCALE
1 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Command:
Command:
Command:
Command:
Command:
Command: *Cancel*

Command:
Command: EXPLODE
1 found

Command:
Command: _.erase 1 found

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: ADCENTER

Command: Duplicate definition of block Valve - Gate flanged ignored.

Command:
Command:
Command: *Cancel*

Command:
Command: EXPLODE
1 found

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: 1 found

Select objects: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]:
Command:
Command:
Command:
Command: _properties
Command:
Command:
Command: _hatch
Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...

Analyzing internal islands...

Pick internal point or [Select objects/Undo/seTtings]:

Command: '_-hatchedit

>>Enter hatch option [DIsassociate/Style/Properties/DRaw order/ADd

boundaries/Remove boundaries/recreate Boundary/ASsociate/separate
Hatches/Origin/ANnotative/hatch COlor/LAyer/Transparency] <Properties>: _p

>>Enter a pattern name or [?/Solid/User defined/Gradient] <ANSI31>: SOLID

Resuming HATCH command.

Command: Selecting everything...

Selecting everything visible...
Analyzing the selected data...

Analyzing internal islands...

Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...

Selecting everything visible...
Analyzing the selected data...

This area has already been specified.

Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...

Analyzing internal islands...

Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...

Selecting everything visible...
Analyzing the selected data...

Analyzing internal islands...

Pick internal point or [Select objects/Undo/seTtings]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: _u LINE
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command:
Command: _arc
Specify start point of arc or [Center]:
Specify second point of arc or [Center/End]:
Specify end point of arc:
Command: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Command: J
JOIN 11 found

6 objects converted to 2 polylines, 5 objects discarded from the operation

Hatch boundary associativity removed.
Crossing Lasso Press Spacebar to cycle options
Command: ROTATE

Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00

7 found

Specify base point:

Specify rotation angle or [Copy/Reference] <90.00>:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: ROTATE

Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00

Window Lasso Press Spacebar to cycle options6 found

Select objects: 1 found, 7 total

Select objects:

Specify base point:

Specify rotation angle or [Copy/Reference] <90.00>:
Window Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Crossing Lasso Press Spacebar to cycle options
Command: SCALE
7 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel*

Window Lasso Press Spacebar to cycle options

Command: *Cancel*

Window Lasso Press Spacebar to cycle options

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Window Lasso Press Spacebar to cycle options

Command:
Command:

Command:
Command:
Command: _u DROPGEOM GROUP
Command: *Cancel*
Crossing Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.25

Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Crossing Lasso Press Spacebar to cycle options

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Window Lasso Press Spacebar to cycle options

Command: SC
SCALE 7 found

Specify base point:

Specify scale factor or [Copy/Reference]:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Crossing Lasso Press Spacebar to cycle options
Command:
Command:

Command:
Command:
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]: _u
All segments already undone.

Specify first point: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 2.25
Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: ADC

Command: Duplicate definition of block Elbow - 90 degrees flanged ignored.

Command:
Command:
Command: *Cancel*

Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00

Select objects: 1 found

Select objects:

Specify base point:

Specify rotation angle or [Copy/Reference] <180.00>:
Command:
Command:
Command:
Command: _bedit
Command:
Command:
Command:

Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:
Command:
Command:

Command:
Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command:
Command: EXPLODE
1 found
Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: _u INTELLIZOOM
Command: _u ERASE
Command:
Command: _.erase 1 found

Command:
Command:
Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.25

Specify next point or [Undo]: *Cancel*

Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.25"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
*Cancel*

Command:
Automatic save to C:\Users\Client\AppData\Local\Temp\
Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: _u LINE
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.1

Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.1

Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.05

Specify next point or [Undo]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.05

Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: VPORTS

Command: MTEXT

Current text style: "Standard" Text height: 0.20" Annotative: No

Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: MTEXT

Current text style: "Standard" Text height: 0.20" Annotative: No

Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:

Command: <Isoplane Left>

Command: <Isoplane Top>
Window Lasso Press Spacebar to cycle options
Command:
Command:
Command:
Command: _copyclip 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:
Command: _pasteclip Specify insertion point:
Command: _u
Command: _u PASTECLIP GROUP
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 Nothing to redo

Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 Nothing to redo

Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 Nothing to redo

Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 Nothing to redo

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]:
Specify through point:
Specify through point: *Cancel*

Command: L
LINE
Specify first point: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: H

Specify through point:

Specify through point: *Cancel*

Command: L
LINE
Specify first point: *Cancel*

Command: L
LINE
Specify first point: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: A

Enter angle of xline (0.00) or [Reference]: Specify second point: 45

Specify through point:

Specify through point: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: A

Enter angle of xline (0.00) or [Reference]: Specify second point: 135

Specify through point:

Specify through point: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: _.erase 1 found

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: LENGTHEN

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.51"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>:

Current length: 0'-1.00"

Select an object to measure or [DElta/Percent/Total/DYnamic] <Total>: *Cancel*

Crossing Lasso Press Spacebar to cycle options

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: <45

Angle Override: 45.00

Specify next point or [Undo]: *Cancel*

Command: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command: ANGLE
MEASUREMENT
Enter new value for MEASUREMENT <0>: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: <45

Angle Override: 45.00

Specify next point or [Undo]: *Cancel*

Command: _u LINE
Command: L
LINE
Specify first point:
Specify next point or [Undo]: <45
Angle Override: 45.00

Specify next point or [Undo]: *Cancel*

Command:
Command: *Cancel*

Command:
Command:
Command:
Command: _properties
Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command: _u LINE
Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.5

Specify next point or [Undo]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command:
Command:
Command:
Command: _copyclip 1 found

Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*

Command: _u PASTECLIP GROUP

Command:
Command:
Command:
Command: _copyclip 1 found

Command:
Command:
Command: _pasteclip Specify insertion point:
Command:
Command: ROTATE

Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00

1 found

Specify base point:

Specify rotation angle or [Copy/Reference] <88.98>: <45

Command:
Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0.00
1 found

Specify base point:

Specify rotation angle or [Copy/Reference] <45.00>: <135

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Automatic save to C:\Users\Client\AppData\Local\Temp\

Drawing1_1_25567_dd934ef1.sv$ ...

Command:
Command: '_-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Crossing Lasso Press Spacebar to cycle options

Command: '_-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command:
Command: _.erase 1 found

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: A

Enter angle of xline (0.00) or [Reference]: 30

Specify through point:

Specify through point: *Cancel*

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: A

Enter angle of xline (0.00) or [Reference]: 150

Specify through point:

Specify through point: *Cancel*

Command:
Command:
Command:
Command: _pedit
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Reverse/Undo]: *Cancel*

Command:
Command:
Command:

Command:
Command:
Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: _quit