Mod. TCB/EV Mod. TCB /EV Mod. TCB /EV: Temperature Control
Mod. TCB/EV Mod. TCB /EV Mod. TCB /EV: Temperature Control
BT
INDUSTRIAL PROCESS CONTROL
mod. TCBx/EV
INTRODUCTION
This bench top unit enables to carry out several tests of
temperature control on a closed circuit for hot water.
A centrifugal pump makes the hot water recirculate from a
heating tank to a plate-type exchanger cooled by tap water.
Temperature is measured by a thermoresistance and it is
controlled by a pneumatic valve inserted in the inlet line of cold
water.
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected] BT 8
TECHNICAL CHARACTERISTICS:
• Framework of AISI 304 stainless steel
• Pneumatic control valve of AISI 316 stainless steel, Cv = 0.13
• Electro-pneumatic converter, 4 to 20 mA / 0.2 to 1 bar
• Hot water generator with tank of AISI 304 stainless steel,
electric heating system, recirculation pump of AISI 304
stainless steel and thermostat
• Pressure gauge for measuring the output signal of I/P
converter
• Switchboard of painted carbon steel with synoptic, ELCB
and measuring terminals for input and output signals of the
controller
• Pipes and valves of AISI 304 and 316 stainless steel
• Only for mod. TCB/EV: electronic microprocessor PID
controller with 4-line Liquid-Crystal Display (LCD) and serial
card, mounted on the switchboard
• Only for mod. TCBf/EV: connection panel for external control
devices
BT
REQUIRED
UTILITIES (PROVIDED BY THE CUSTOMER)
• Compressed air (female valve of ¼”): 0,3 Nm3/h @ 1,5 bar
• Tap water (valve with ½” hose connector): 1000 l/h @ 2 bar
SUPPLIED WITH
THEORETICAL-EXPERIMENTAL
HANDBOOK
25C-E-BT-TCB-3
OPTIONAL
TWO-PEN RECORDER
(only for mod. TCB/EV and TCBx/EV: it must be installed before
shipment, not as upgrade)
BT 9 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected]