FAP 800 Series

High-Brightness Fiber-Coupled Bars FEATURES

• High reliability
Fiber Array Packages (FAP) from Coherent are the highest quality
• High efficiency
fiber-coupled diode lasers in the industry, offering you the simplest
way of delivering the output from a diode laser bar to your application. • High brightness
• Rugged construction
The FAP 800 series consists of a 19-element conduction-cooled
diode laser bar, lensed and coupled to an 800 µm, multimode fiber
APPLICATIONS
bundle array.
• Solid-State Laser Punping
• Plastic Welding
• Soldering
• Heating
 FAP 800 Series Datasheet

SPECIFICATIONS1 FAP800-L-30W-803.0 FAP800-30W-805.0 FAP800-30W-805.0

to809.0-F<3.0-25C to811.0-F<3.5-25C to811.0-F<3.5-25C
Part Number 1065526 1059281 1071370

OPTICAL SPECIFICATIONS
CW Output Power (W) 25 30 30
Center Wavelength2 (nm) 807.5 808 940
Center Wavelength Tolerance (nm) ±2.5 ±3.0 ±2.0
Spectral Width2 (nm) <2.5 <3.5 <6.0
Wavelength Temperature Coefficient (nm/°C) 0.28 0.28 0.35
Beam Divergence3 (NA) <0.14 <0.14 <0.16
Beam Diameter (μm) 810 810 810

ELECTRICAL CHARACTERISTICS (typical)

Slope Efficiency (W/A) >0.8 >0.8 >0.75
Conversion Efficiency (%) >35 >35 >35
Threshold Current (A) 8 to 11 8 to 11 4 to 7
Operating Current (A) <28 <46 <46
Operating Voltage (V) <2.1 <2.1 <2.2
Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier 8 or heavier

THERMAL SPECIFICATIONS
Thermal Resistance (typical) (°C/W) 0.7 0.7 0.7
Case Operating Temperature (°C) -20 to 30 -20 to 30 -20 to 30
Case Storage Temperature (°C) -20 to 60 -20 to 60 -20 to 60

RECOMMENDED HEAT SINK

Capacity (W) 100 100 100
Thermal Resistance (°C/W) <0.1 <0.1 <0.1

MECHANICAL SPECIFICATIONS
Weight 300 g (10.3 oz.) 300 g (10.3 oz.) 300 g (10.3 oz.)
Fiber Connector SMA 905 SMA 905 SMA 905
1
All values measured at case temperature (TC) = 25°C.
2
Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative.
3
The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.
 FAP 800 Series Datasheet

SPECIFICATIONS1 FAP800-40W-805.0 FAP800-R-40W-930.0 FAP800-R-40W-970.0

to811.0-F<3.5-25C to950.0-F<6.0-25C to990.0-F<6.0-25C
Part Number 1057814 1082408 1082412

OPTICAL SPECIFICATIONS
CW Output Power (W) 40 40 40
Center Wavelength2 (nm) 808 940 980
Center Wavelength Tolerance (nm) ±3.0 ±10.0 ±10.0
Spectral Width2 (nm) <3.5 <6.0 <6.0
Wavelength Temperature Coefficient (nm/°C) 0.28 0.28 0.28
Beam Divergence3 (NA) <0.14 <0.11 <0.11
Beam Diameter (μm) 810 810 810

ELECTRICAL CHARACTERISTICS (typical)

Slope Efficiency (W/A) >0.8 >0.8 >0.8
Conversion Efficiency (%) >35 >50 >50
Threshold Current (A) 9 to 13 <8 <7
Operating Current (A) <53 <54 <54
Operating Voltage (V) <2.2 <1.7 <1.7
Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier 8 or heavier

THERMAL SPECIFICATIONS
Thermal Resistance (typical) (°C/W) 0.7 0.7 0.7
Case Operating Temperature (°C) -20 to 30 -20 to 30 -20 to 30
Case Storage Temperature (°C) -20 to 60 -20 to 60 -20 to 60

RECOMMENDED HEAT SINK

Capacity (W) 100 100 100
Thermal Resistance (°C/W) <0.1 <0.1 <0.1

MECHANICAL SPECIFICATIONS
Weight 300 g (10.3 oz.) 300 g (10.3 oz.) 300 g (10.3 oz.)
Fiber Connector SMA 905 SMA 905 SMA 905
1
All values measured at case temperature (TC) = 25°C.
2
Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative.
3
The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.
 FAP 800 Series Datasheet

SPECIFICATIONS1 FAP800-50W-805.0 FAP800-70W-800.0to

to811.0-FW90E<4.5-25C 820.0-FW90E<5.0-25C
Part Number 1124386 1295614

OPTICAL SPECIFICATIONS
CW Output Power (W) 50 70
Center Wavelength2 (nm) 808 810
Center Wavelength Tolerance (nm) ±3.0 ±10.0
Spectral Width2 (nm) <4.5 <8.0
Wavelength Temperature Coefficient (nm/°C) 0.28 0.28
Beam Divergence3 (NA) <0.14 <0.16
Beam Diameter (μm) 810 810

ELECTRICAL CHARACTERISTICS (typical)

Slope Efficiency (W/A) >0.8 >0.9
Conversion Efficiency (%) >40 >45
Threshold Current (A) 8 to 11 11
Operating Current (A) <65 <85
Operating Voltage (V) <2.2 <2.2
Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier

THERMAL SPECIFICATIONS
Thermal Resistance (typical) (°C/W) 0.7 0.7
Case Operating Temperature (°C) -20 to 30 -20 to 30
Case Storage Temperature (°C) -20 to 60 -20 to 60

RECOMMENDED HEAT SINK

Capacity (W) 100 100
Thermal Resistance (°C/W) <0.1 <0.1

MECHANICAL SPECIFICATIONS
Weight 300 g (10.3 oz.) 300 g (10.3 oz.)
Fiber Connector SMA 905 SMA 905
1
All values measured at case temperature (TC) = 25°C.
2
Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative.
3
The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.
 FAP 800 Series Datasheet

MECHANICAL SPECIFICATIONS

Top View
Side Bottom
31.8 mm View View
(1.25 in.)
6.4 mm
(0.25 in.) 16.4 mm 25.8 mm
(0.64 in.) (1.02 in.) 9.5 mm
19.1 mm
(0.375 in.) 3.1 mm
3.0 mm (0.75 in.) 8.6 mm
13.4 mm (0.34 in.) (0.12 in.)
(0.12 in.) (0.53 in.)
15.8 mm
(0.62 in.)
70.0 mm 12.7 mm See Detail A
(2.75 in.) (0.50 in.)
64.0 mm
(2.52 in.) 64.0 mm
Ø2.0 mm
(2.52 in.)
57.1 mm (0.08 in.) Ø3.3 mm
(2.25 in.) (0.13 in.)
2X Ø3.8 mm Thru 22.2 mm Thru First Wall
(0.15 in.) (0.88 in.)

21.1 ±1.0 mm
4X Ø4.0 mm Thru 8.8 mm (0.83 ±0.04 in.)
(0.16 in.) (0.35 in.) SMA 905 Male Connector
11.7 mm Ø800 µm Fiber Bundle
(0.46 in.) 14.8 mm AR Coated
(0.58 in.)
3.3 mm (0.13 in.)
Front 1.6 ±0.025 mm (0.06 ±0.001 in.)
View
17.3 mm
(0.68 in.) 4.3 mm (0.17 in.)

2X R Detail A
15.9 mm 2.2 mm (scale 3.0)
(0.63 in.) (0.09 in.)
Nose Length
9.77 to 9.80 mm
(0.3847 to 0.3860 in.)
 FAP 800 Series Datasheet

MECHANICAL SPECIFICATIONS

Top View

31.8 mm
(1.25 in.) Bottom
6.4 mm
16.4 mm
View
(0.25 in.)
(0.64 in.)
3.0 mm 19.1 mm 9.53 mm
13.4 mm (0.375 in.) 3.1 mm
(0.12 in.) (0.75 in.)
(0.53 in.) (0.12 in.)

15.8 mm
(0.62 in.)
70.0 mm
12.7 mm
(2.75 in.) 64.0 mm
(0.50 in.)
64.0 mm Scale 0.75 (2.52 in.)
(2.52 in.)
57.1 mm 2X Ø3.8 mm Thru
(2.25 in.) (0.15 in.) See Detail A

8.8 mm Ø3.3 mm
4X Ø4.0 mm Thru (0.35 in.) 1000.0 ±25.4 mm (39.4 ±1.0 in.) (0.13 in.)
(0.16 in.) 11.7 mm
(0.46 in.) 38.1 mm
(1.5 in.) 22.2 mm
15.9 mm
(0.88 in.) Ø2.0 mm (0.08 in.)
(0.63 in.)

Front
25.8 mm
View 17.3 mm 14.8 mm (1.02 in.)
(0.68 in.) SMA 905 (0.58 in.)
Male Connector

3.3 mm (0.13 in.) Side View 8.6 mm

(0.34 in.)
1.6 ±0.025 mm
(0.06 ±0.001 in.)
4.3 mm (0.17 in.)

2.2 mm 2X R Detail A
(0.09 in.) (scale 3.0)

Coherent, Inc.,
5100 Patrick Henry Drive Santa Clara, CA 95054
p. (800) 527-3786 | (408) 764-4983
f. (408) 764-4646

[email protected] www.Coherent.com

Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations
(21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.

Coherent offers a limited warranty for all Fiber Array Packages. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative.
Printed in the U.S.A. MC-156-04-0M0917Rev.E Copyright ©2017 Coherent, Inc.