Hitchhiker's Guide to Demand Management

Project 2010 Case Study

Prepared for Contoso Monday, 4 October 2010

Prepared by Steven Haden

Published by Project Server Content Publishing

The information contained in this document represents the current view of Microsoft Corporation on the issues discussed as of the date of publication. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information presented after the date of publication. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS DOCUMENT. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. The descriptions of other companies products in this document, if any, are provided only as a convenience to you. Any such references should not be considered an endorsement or support by Microsoft. Microsoft cannot guarantee their accuracy, and the products may change over time. Also, the descriptions are intended as brief highlights to aid understanding, rather than as thorough coverage. For authoritative descriptions of these products, please consult their respective manufacturers. 2010 Microsoft Corporation. All rights reserved. Microsoft and Windows are either registered trademarks of Microsoft Corporation in the United States and/or other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Page ii

Table of Contents
1 1.1 1.2 Introduction .......................................................................................................................... 1 Purpose ..................................................................................................................................... 1 Audience ................................................................................................................................... 1 1.2.1 1.3 2 2.1 3 3.1 3.2 3.3 Reading Guide ..................................................................................................................... 1

General steps ............................................................................................................................ 1 Vision: Case Study for Contoso ............................................................................................... 3 Introduction .............................................................................................................................. 3 Plan/Specify: The Demand Management Process Lifecyle ...................................................... 5 Introduction .............................................................................................................................. 5 Overview................................................................................................................................... 5 Define the process .................................................................................................................... 6 3.3.1 3.3.2 3.3.3 Phases ................................................................................................................................. 6 Stages .................................................................................................................................. 7 Activities .............................................................................................................................. 9

3.4 3.5 4 4.1 4.2 4.3 4.4 4.5

The Contoso Sample Project .................................................................................................. 10 List of the objects to configure/use in Project 2010 .............................................................. 12 Build/Create: Workflow Configuration ................................................................................. 14 Enterprise Project Templates ................................................................................................. 14 Phase: A Collection of Steps in a Project Life Cycle ................................................................ 14 Stage: A Step in a Project Life Cycle ....................................................................................... 14 Project Detail Pages (PDP) in Stages....................................................................................... 14 Configuration tasks on Project Server 2010 ........................................................................... 15 4.5.1 4.5.2 Initial Setup ....................................................................................................................... 15 Workflow configuration .................................................................................................... 15

4.6

Configuration Best practices .................................................................................................. 16 4.6.1 Naming conventions to use to distinguish specific workflow objects .............................. 16
Page iii

4.6.2 4.7

List of custom fields used in our example ......................................................................... 17

How to (in Project 2010) ........................................................................................................ 18 4.7.1 4.7.2 4.7.3 4.7.4 4.7.5 4.7.6 Lookup tables and Custom Fields ..................................................................................... 19 Project Detail Pages Creation............................................................................................ 24 Workflow Phases Creation ................................................................................................ 30 Workflow Stages Creation ................................................................................................ 31 Enterprise Project Type Creation ...................................................................................... 34 Workflow Approvals Page ................................................................................................. 35

5 5.1 5.2 5.3 5.4 5.5 5.6

Build/Create Workflow Orchestration .................................................................................. 37 Workflow Creation, Administration, and Usage Process ....................................................... 37 Workflow Key concepts .......................................................................................................... 37 Relations between Project Server Objects and Visual Studio orchestration ......................... 39 Development Tasks with Visual Studio 2010 ......................................................................... 41 List of the objects to create in Visual Studio 2010 ................................................................. 41 How to (In Visual Studio 2010) ............................................................................................... 43 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 Setting up the toolbox in Visual Studio ............................................................................. 43 Creating a new Project ...................................................................................................... 48 Initial Step ......................................................................................................................... 50 Adding more activities with the designer ......................................................................... 52 Get the GUID from Project Configuration ......................................................................... 72

5.7

Deploy the workflow .............................................................................................................. 73 5.7.1 5.7.2 Using Visual Studio automatic deployment ...................................................................... 73 Using a WSP package ........................................................................................................ 76

5.8 5.9

Developing your own custom activity .................................................................................... 78 Development Best practices and Guide ................................................................................. 82 5.9.1 5.9.2 Best practices .................................................................................................................... 82 Description of Activities in a Nutshell ............................................................................... 83

Page iv

5.9.3 6 6.1

Source code of the sample................................................................................................ 86

Deploy: Deployment from Dev to QA/Production ................................................................. 91 Deployment of the solution on a QA and Production environment ...................................... 91 6.1.1 6.1.2 Using the new 2010 Playbooks ......................................................................................... 91 Solution starter EPT Export Import ................................................................................... 94

7 7.1

Debug/Monitor: Troubleshooting Workflows ....................................................................... 96 Debugging the workflow ........................................................................................................ 96 7.1.1 7.1.2 Copying the PDB of your assembly to the GAC ................................................................. 96 Attaching the debugger .................................................................................................... 96

7.2

Troubleshooting a Workflow .................................................................................................. 97 7.2.1 7.2.2 Check the workflow status page ....................................................................................... 97 View the ULS logs .............................................................................................................. 99

8 8.1 8.2

References ........................................................................................................................ 100 General references ............................................................................................................... 100 References given in this document ...................................................................................... 100

Table of Figures
Figure 1: Contoso Sample Project Process ............................................................................................. 3 Figure 2: Demand management phases and stages ............................................................................... 6 Figure 3: List of phases............................................................................................................................ 6 Figure 4: List of stages............................................................................................................................. 7 Figure 5: List of fields for Idea Collection................................................................................................ 8 Figure 6: List of fields for Lead Approval ................................................................................................ 8 Figure 7: List of fields for Cancelled ........................................................................................................ 8 Figure 8: List of fields for Execution ........................................................................................................ 9 Figure 9: List of fields for Post Mortem .................................................................................................. 9 Figure 10: List of activities ...................................................................................................................... 9 Figure 11: Contoso Sample Project Process (detailed) ......................................................................... 11 Figure 12: List of objects to configure/use in Project Server 2010 ....................................................... 12 Figure 13: Hierarchy of Project Server objects ..................................................................................... 15 Figure 14: IT Workflow phases.............................................................................................................. 16 Figure 15: IT Workflow stages............................................................................................................... 17 Figure 16: Contoso Sample Project example phases ............................................................................ 17
Page v

Figure 17: Contoso Sample Project example stages ............................................................................. 17 Figure 18: Contoso list of custom fields ................................................................................................ 18 Figure 19: PWA1 Project Web App ....................................................................................................... 18 Figure 20: List of CF and LT for Contoso sample ................................................................................... 19 Figure 21: Steps to create CF and LT ..................................................................................................... 24 Figure 22: Steps to create PDPs ............................................................................................................ 29 Figure 23: Steps to create phases ......................................................................................................... 31 Figure 24: Steps to create stages .......................................................................................................... 34 Figure 25: Steps to create an EPT ......................................................................................................... 35 Figure 26: The default Project Server Approval form ........................................................................... 36 Figure 27: Different actors for managing a workflow ........................................................................... 37 Figure 28: Project Server Workflow technology building blocks hierarchy .......................................... 38 Figure 29: Project Server workflow services ......................................................................................... 39 Figure 30: Relation between Project Server and Visual Studio objects ................................................ 40 Figure 31: List of Visual Studio objects to create/use........................................................................... 43 Figure 32: Updating the Visual Studio Toolbox..................................................................................... 43 Figure 33: Steps to update the Visual Studio toolbox for Project Server Activities.............................. 45 Figure 34: Steps to update the Visual Studio toolbox for SharePoint Server Activities ....................... 47 Figure 35: Steps to create a Visual Studio project for Project Server workflows ................................. 50 Figure 36: Steps to insert the initial activities in the Visual Studio project .......................................... 52 Figure 37: Steps to create the workflow in Visual Studio ..................................................................... 71 Figure 38: Finding the GUIDs for the Project Server objects ................................................................ 73 Figure 39: Script to restart the 3 services after the deployment ......................................................... 73 Figure 40: Steps to deploy your workflow using Visual Studio ............................................................. 76 Figure 41: Steps to deploy your workflow using a WSP package ......................................................... 78 Figure 42: Steps to add a custom Activity to our workflow project ..................................................... 82 Figure 43: List of Best Practices ............................................................................................................ 83 Figure 44: Description of Project Server workflow activities ............................................................... 84 Figure 45: Description of SharePoint workflow activities ..................................................................... 84 Figure 46: Description of SharePoint Server (Office Task) workflow activities .................................... 85 Figure 47: Description of Windows workflow activities ....................................................................... 86 Figure 48: Source Code of the workflow .............................................................................................. 90 Figure 49: Steps to Backup/Restore workflow configuration using Playbooks 2010 ........................... 94 Figure 50: Script to copy assembly to the GAC for debugging purposes .............................................. 96 Figure 51: Example showing the use of appcmd to get the w3P process number ............................... 97 Figure 52: Steps to troubleshoot a workflow ....................................................................................... 98

Page vi

1
1.1

INTRODUCTION
Purpose

This document should contain all the required information to get started on implementing a full Demand Management solution with Microsoft Project 2010. It assumes that no previous configuration has been defined in a Project Web App instance.

1.2

Audience

The IT Pro The Developer The Project Management Office (PMO) The Business Users

1.2.1
Chapter Vision

Reading Guide
IT Pro Developer PMO X X X X X Business Users X X

Plan/Specify Build/Create Configuration Build/Create Orchestration Deploy Debug/Monitor Use X X

1.3

General steps

There are four general steps to perform to create your workflow in Microsoft Project Server 2010 that are detailed in this document:
1. Plan/Vision
Page 1

2. Workflow Configuration: Create objects in Project Server 3. Workflow Orchestration: Create workflow in Visual Studio 2010 4. Deploy

The source code for this sample is available on MSDN Code Gallery at this URL: http://code.msdn.microsoft.com/PS2010DMSample

Page 2

2
2.1

VISION: CASE STUDY FOR CONTOSO

Introduction

In this chapter we define the demand management process to be used by Contoso. It is not the goal of this document to describe how to define the demand management process; this subject is covered by the document Demand Management in Project Server 2010 (http://go.microsoft.com/fwlink/?LinkId=191854). We use this simple example to model the project process from the Idea collection to its Execution and a Post Mortem:

Figure 1: Contoso Sample Project Process

The Demand management process used by Contoso starts in the Create phase with collecting information about this new Idea: a name, a description, a choice to specify if some funding is required, and a proposed project manager. If the project requires funding, we enter the Select phase where it will need to be approved by a Team Lead. Once it is approved, or if no funding is required, we enter the Manage phase. The project permissions will be updated to grant the Project manager rights to the specified proposed project manager. Then the project is executed and the scheduling is done by the project manager until the project is completed.
Page 3

Once the project is completed, we enter the Finish phase, where information is captured about the project execution in a post-mortem stage. This specification can be done using Microsoft Visio and the Cross-Functional Flowchart Template.

Page 4

PLAN/SPECIFY: THE DEMAND MANAGEMENT PROCESS LIFECYLE

3.1

Introduction

The demand management process captures all work proposals in one place, guides the proposals through a multistage governance process, helps users make decisions about which proposals to approve, and tracks progress on project execution until the work is completed. A key component within demand management is the workflow governance model implemented in Project Server. A governance workflow includes definitions of the life cycle stages through which the project progresses, such as proposal creation and initial approval. The workflow defines what information is required or locked in each stage. For example, a workflow can lock budget cost after the project is approved. A workflow can include necessary manual approval or notification steps and add business logic to update other LOB systems. For example, a workflow can update an enterprise resource planning (ERP) system when the proposal budget is approved.

3.2

Overview

In project portfolio management, a project life cycle is a long-running process that spans governance phases. Typical demand management phases are: create, select, plan, and manage. The planning and management phases are accomplished by the more familiar project management processes by using Project Professional and Project Web App. Workflows model the governance processes and provide a structured way for projects to proceed through the phases. Workflows, along with other proposal data in project detail pages (PDPs), are captured and integrated within the demand management feature set, providing a rich and dynamic platform on which customers and partners can build custom solutions. Figure 2 shows the four standard phases of demand management and how they fit together. Within each phase are stages such as Propose idea and Initial review. Each stage can have one or more associated PDPs in Project Web App. The entire collection of stages represents a single workflow that can be linked to an enterprise project template (EPT).

Page 5

Figure 2: Demand management phases and stages

3.3

Define the process

We first define the process to be used in terms of Phases/Stages/Activities. Our recommendation is to use a business modeling tool like Microsoft Visio to first outline the project processes. In the Vision chapter, we have defined the Process for our simple project. We will now refine this vision.

3.3.1

Phases

In our example we have identified the following phases: Phase name Create Select Manage Finished
Figure 3: List of phases

Phase Prefix C S M F

We use a simple prefix, of one or 2 letters for each phase, that will allow us to use it when referring to the phase from another context.

Page 6

3.3.2

Stages

For each stage, we define what are the inputs from the stage and the outputs resulting from this stage. This will define the list of fields that are to be displayed in the Project Detail Page (PDP). At the same time (if necessary) we can list the resulting outputs from this stage (like computed fields).
Define the Input and output of each stage Define the required information to capture (fields) in forms Define the state of the fields in each stage (Required, R/W, Read only)

A stage controls the behavior of: o o o Visible PDPs Read-Only/Required Custom Fields Associated Phase

In our example we have defined the following stages: Stage name Idea Collection Stage Prefix IC Inputs Name, Business Reason, Needs Funding, Project Manager Lead Approval LA Decision, Justification Cancelled Execution Post Mortem C E PM N/A Planning/Progress Lessons Learned, On Budget, Reasons
Figure 4: List of stages

Outputs

For each stage in our example, we detail the different fields.

Page 7

Idea Collection Input Name

Required

State

Output

Format

Yes

R/W

String 255 characters String Multiple lines Radio button String 255 characters

Description

Yes

R/W

Needs Funding Project Manager

Yes Yes

R/W R/W

Figure 5: List of fields for Idea Collection

Lead Approval Input Name

Required

State

Output

Format

N/A

String 255 characters String Multiple lines String 255 characters Choice button String Multiple lines

Description

N/A

Project Manager

N/A

Decision Justification

Yes Yes

R/W R/W

Figure 6: List of fields for Lead Approval

Cancelled Input N/A

Figure 7: List of fields for Cancelled

Required

State

Output

Format

Execution Input

Required

State

Output

Format

Page 8

N/A
Figure 8: List of fields for Execution

Post Mortem Input Lessons Learned

Required Yes

State R/W

Output

Format String Multiple line

On Budget Reasons

Yes

R/W R/W

Yes/No

Radio Button String Multiple line

Figure 9: List of fields for Post Mortem

3.3.3

Activities

For each stage we define if specific activities are needed. Some examples of possible activities are:
Define if an approval is needed Define if e-mail messages are sent Define which information on the progress of the workflow is to be communicated to the users

In our example here are the lists of activities we have identified: Stage name Idea Collection Activities List Needs funding Approval Approval Cancelled E-mail to inform Project Manager Update Project Permission Post Mortem
Figure 10: List of activities

Progress information

Lead Approval Cancelled Execution

Page 9

3.4

The Contoso Sample Project

Here is the Visio diagram of the Contoso Sample project Workflow. This diagram captures the different objects that are present in our workflow solution: the phases the stages the activities the PDPs visible for each activity and the state: Read-only or R/W.

Page 10

Figure 11: Contoso Sample Project Process (detailed)

Page 11

3.5

List of the objects to configure/use in Project 2010

The following objects are configured and used in Project 2010 for our example: Objects
Phases

List Create Select Manage Finished

Stages (Linked to the Visual Studio

Workflow)

Idea Collection Lead Approval Cancelled Execution Post Mortem

Custom Fields and Lookup Tables (Linked

to the Visual Studio Workflow)

Proposed Project Manager (a Project resource) Funding Required On Budget Reasons Lessons Learned

Project Detail Pages

Idea Collection (Initial Project Page) Post Mortem

Default Web Part and Custom Web Parts

Project Fields

Enterprise Project Type

Contoso Sample Project

Workflow Approval page

Figure 12: List of objects to configure/use in Project Server 2010

Default Project Server Approval

Page 12

Apart from these workflow-related objects, we need to define some users in the PWA instance. The workflow uses the members of the Team Lead default Security Group to get the approval on the project when funding is required. At least one user must be a member of this default security group.

Page 13

4
4.1

BUILD/CREATE: WORKFLOW CONFIGURATION

Enterprise Project Templates

An enterprise project type represents a wrapper that encapsulates phases, stages, a single workflow, and PDPs. Each EPT represents a single project type. Normally, project types are aligned with individual departments, for example, marketing projects, IT projects, or HR projects. Using project types helps to categorize projects within the same organization that have a similar project life cycle. For a user, the EPTs appear in a drop-down list of project types when the user clicks New Project on the Ribbon in Project Web App.

4.2

Phase: A Collection of Steps in a Project Life Cycle

A phase represents a collection of stages grouped to identify a common set of activities in the project life cycle. Examples of phases are project creation, project selection, and project management (shown as Create, Select, and Manage Phases. Phases do not have any direct technical effect on the behavior of an EPT. That is, changing the order of phases does not affect how the system reacts. The primary purpose of demand management phases is to provide a smoother user experience where users have the option of organizing stages into logical groups.

4.3

Stage: A Step in a Project Life Cycle

A stage represents one step within a project life cycle. A stage is composed of one or more PDPs linked by common logic or theme. Stages at a user level appear as steps within a project. At each step, data must be entered, modified, reviewed, or processed.

4.4

Project Detail Pages (PDP) in Stages

A PDP represents a single Web Part Page in Project Web App. PDPs can be used to display or collect information from the user. You can create PDPs in much the same way you create any Web Part Page in a SharePoint site, where you can add Web Parts that provide the experience you want. You can add individual Web Parts from the standard Web Part galleries or create custom Web Parts.

Project Server Web Parts and custom Web Parts used in demand management all contain custom fields. Web Parts can make calls to the Project Server Interface (PSI), query the Reporting database, or integrate with external systems. Figure 13 shows the general hierarchy of the parts of demand management in Project Server 2010.

Page 14

Figure 13: Hierarchy of Project Server objects

4.5
4.5.1

Configuration tasks on Project Server 2010

Initial Setup

After the initial configuration of Project Server 2010, the following step needs to be checked:
To define the Workflow Proxy Setting account.

The Project Server Workflows need to run under the context of a Windows user. However, they do not run under the context of the user that started the project. Instead, the workflows are run under the Workflow Proxy Account. This means that the user account that you specify as the workflow proxy account must have the proper rights to execute all of the commands that a Project Server workflow will need to do. You can find information on how to set up the Workflow Proxy Account in this article: http://blogs.technet.com/projectadministration/archive/2009/12/21/how-to-setup-the-workflowproxy-account.aspx

4.5.2

Workflow configuration

The following configuration tasks will have to be done on Project Server 2010. We recommend doing the tasks in this order.
1. 2. 3. 4. 5. 6. 7. Define the list of Lookup Table Values (LTV) Define the list of Custom Fields (CF) Define the list of Project Detail Pages (PDP) Define the list of Workflow Stages Define the list of Workflow Phases Create the Enterprise Project Types (EPT) (without Workflow, if workflow not yet deployed) Define the Permissions for users involved in Workflow.

Page 15

4.6
4.6.1

Configuration Best practices

Naming conventions to use to distinguish specific workflow objects

For each kind of object to be defined in the Workflow configuration, we recommend to use some specific naming conventions. These conventions will ease the initial configuration of the workflow and its maintenance. Workflow Phase: Prefix with a number to force the order in the display Also, if a Phase is unique for a certain type of Workflow, add an acronym after the number that defines the uniqueness. Maybe always use specific phases for each workflow, instead of sharing between several different workflows For example, for an IT Workflow: 1-IT Demand Management 2-IT Portfolio Selection 3-IT Portfolio Planning 4-IT Tracking and Remediation
Figure 14: IT Workflow phases

DM PS PP TR

Workflow Stages: Use a lowercase letter (s, for example) followed by a number, to force the order of display and to distinguish from phases. You can also use an acronym after the order letter to attach to a specific workflow.

s1- IT Idea Collection s2-IT Lead Approval s3-IT Idea Cancelled s4-IT Scheduled s5- IT Execute s6- IT Post Mortem

Page 16

Figure 15: IT Workflow stages

In our Simple Project example for the phases: 1-Create 2-Select 3-Manage 4-Finished
Figure 16: Contoso Sample Project example phases

CR SE MA FI

In our Simple Project example for the stages: s1-Idea Collection s2-Lead Approval s3-Cancelled s4-Execution s5-Post Mortem
Figure 17: Contoso Sample Project example stages

ic ap ca ex pm

4.6.2

List of custom fields used in our example

In our Simple Project example we use the following fields: Project Name (default field) Description (default field) Funding Required Proposed Project Manager Lessons Learned On Budget

Page 17

Reasons
Figure 18: Contoso list of custom fields

4.7

How to (in Project 2010)

In this chapter we describe the precise steps involved to create the different objects of our example using the administrative pages of Project Web App.
1. 2. 3. 4. 5. 6. Custom Field and Lookup table Guids Web Part specific Creation Project Detail Pages (PDP) Creation Workflow Phases Creation Workflow Stages Creation Enterprise Project Type (EPT) Creation

We start from a basic Project Web App instance that is named: http://project.contoso.com/PWA1

Figure 19: PWA1 Project Web App

This application has only the sample workflow installed, but we will not use any objects from this sample in our example, apart from the Project Approval form. You must log on using the Functional Project administrator, to do the configuration. We need to create the Project Server objects in a bottom up order, following the hierarchy presented in Figure 13.

Page 18

4.7.1

Lookup tables and Custom Fields

In this chapter we first create the Lookup tables (LT) and then the Custom Fields for our example. Field name Custom Field (CF) or Lookup Table (LT) Funding Required LT Funding Required LT CF Text: Value Yes/No Project of Type Text Using a lookup table Project of Type Text Type

Proposed Project Manager Lessons Learned On Budget LT

CF

CF LT

Project of Type Text Text: Value OK/Under/Exceeded Project of Type Text Using a lookup table Project of Type Text

On Budget

CF

Reasons
Figure 20: List of CF and LT for Contoso sample

CF

Actions In Project Web App, after selecting Settings/Server Settings: Select Enterprise Custom Fields and Lookup Tables

Screen

Page 19

Select the New Lookup Tables button

Name: Funding required Type: Text Code Mask: * Lookup Table values: Yes No

It is important to take a note of the GUID of the Yes value and the Lookup table itself. These values will be needed later. You must first Save the new Lookup table and reopen it. Select the value Yes in the Lookup table, and get the value just under the table.

To create the field Funding Required, select the button New Field in the Enterprise Custom Fields section. Select "Field button

Page 20

Name: Funding required Entity and Type: Project Text Custom Attributes: Lookup Table: Funding Required Behavior: Select Behavior controlled by workflow

It is important to take a note of the GUID of the Custom field. You must first Save the new Custom field and reopen it. For the Custom Field GUID, check the last field System Identification Data

Page 21

Name: Proposed Project Manager Entity and Type: Project Text Custom Attributes: Single Line of Text Behavior: Select Behavior controlled by workflow

Page 22

Name: Lessons Learned Entity and Type: Project Text Custom Attributes: Multiple Lines of Text Behavior: Select Behavior controlled by workflow

Lookup table Name: On Budget Type: Text Code Mask: * Lookup Table values: OK Under Exceeded

Page 23

Name: On Budget Entity and Type: Project Text Custom Attributes: Single Line of Text Behavior: Select Behavior controlled by workflow

Figure 21: Steps to create CF and LT

4.7.2

Project Detail Pages Creation

There are three types of Project Detail Pages that can be created:
New Project: Used for creating a project. This type of PDP is required with an enterprise project template that has a workflow for portfolio analysis. Workflow Status: Shows the current stage and status for a project proposal. Project: Used for editing project details in a non-workflow enterprise project template, or in other applications.

It is a good practice to create your own New Project page, so that you can start to enter directly required information for creating your project. In our example we are creating the following PDPs:
IdeaCollection PostMortem

Page 24

Actions In Project Web App, after selecting Settings/Server Settings: Select Project detail Pages in the last section

Screen

Select the Documents tab

Select New Document in the ribbon

Page 25

Select a Full Page vertical Page and name it: IdeaCollection

We can now add some Web Parts to this blank page. Select Add a Web Part Select Categories: Project Web App Web Parts: Project Fields And the button Add

The Project Fields Web Ppart is displayed. You have to select some project fields now to populate the Web Part. Select from the right top menu: Edit Web Part

Page 26

Select the Modify button

Select the fields: Project Name Description Funding Required Proposed Project Manager

Page 27

Update the Title of the page to: Idea Collection Select OK to close the update of the Web Part.

The PDP is now ready

Page 28

Select the Page Tools tab in the ribbon And the Stop Editing command

PDP page is now finished

We have to edit the properties of the page.

Update the Display Name to: Idea Collection Select New Project for the Page Type.

Do the same for the Post Mortem page Add these fields: Lessons Learned On Budget Reasons

Figure 22: Steps to create PDPs

Page 29

4.7.3

Workflow Phases Creation

The following phases will be created:

1-Create 2-Select 3-Manage 4-Finished

Actions In Project Web App, after selecting Settings/Server Settings: Select: Workflow Phases

Screen

Select New Workflow Phase

Name : 1-Create and add a description

Create the following phases: 2-Select 3-Manage

Page 30

4-Finished
Figure 23: Steps to create phases

4.7.4

Workflow Stages Creation

The following five stages are created:

s1-Idea Collection s2-Lead Approval s3-Cancelled s4-Execution s5-Post Mortem

Actions In Project Web App, after selecting Settings/Server Settings: Select Workflow Phases

Screen

Select New Workflow Stage

Page 31

Enter the following Name: s1- Idea Collection Description Workflow phase: 1-Create Visible Project Detail Pages: Idea Collection Project Details The two required fields: Funding required Proposed Project Manager

Name: s2- Lead Approval Description Workflow phase: 2-Select Visible Project Detail Pages: Idea Collection Project Details The required field: Proposed Project Manager The read-only field:
Funding required

Page 32

Name:s3- Cancelled Description Workflow phase: 2-Select Visible Project Detail Pages:
Idea Collection Project Details

The required field:

None

The read-only fields:

Proposed Project Manager Funding required

Name: s4- Execution Description Workflow phase: 3-Manage Visible Project Detail Pages: Idea Collection Project Details Schedule Schedule The required field: None The read-only fields: Proposed Project Manager Funding required

Page 33

Name: s5- Post Mortem Description Workflow phase: 4-Finished Visible Project Detail Pages: Post Mortem Idea Collection Project Details Schedule The required fields: Lessons Learned On Budget Reasons The read-only fields: Proposed Project Manager Funding required

Result of the stages creation

Figure 24: Steps to create stages

4.7.5

Enterprise Project Type Creation

We create the Enterprise Project Type (EPT): Contoso Project.

Actions In Project Web App, after selecting Settings/Server Settings: In the Workflow and Project Detail Pages Select:

Screen

Page 34

Enterprise Project Types

Select New Enterprise Project Type

Enter Name: Contoso Project Description: Site Workflow Association: No workflow New Project Page: Idea Collection No need to select Project Detail Pages

If you want to specify an image with this EPT, you can specify an URL in a shared document library containing the image
Figure 25: Steps to create an EPT

In order to be able to choose the Workflow to be associated with this Enterprise Project type, the workflow needs to have been deployed in the Site Collection of Project Web App (see chapter 6.1).

4.7.6

Workflow Approvals Page

A default Workflow Approvals Web page exists. We use this default page in our example. It is named Project Server Approval Content Type.

Page 35

Figure 26: The default Project Server Approval form

Page 36

5
5.1

BUILD/CREATE WORKFLOW ORCHESTRATION

Workflow Creation, Administration, and Usage Process

The following diagram shows the different processes involved in the creation, administration, and usage of project workflow. It also shows the different actors involved. The Workflow is created in Visual Studio by a developer. It is deployed in Project Web App instance by a SharePoint administrator. By the PWA administrator it is associated with a project EPT. A user then creates a new project and initiates the workflow. The workflow starts and waits for user input at the different defined stages. At one point the workflow terminates.

Figure 27: Different actors for managing a workflow

5.2

Workflow Key concepts

The Project 2010 workflows are built from SharePoint 2010 Site Workflows.
Page 37

SharePoint Workflows are built off of Windows Workflow Foundation, which in turn is built off of Windows .NET Framework 3.5.

Figure 28: Project Server Workflow technology building blocks hierarchy

The workflows are made up of workflow activities that are objects with code within it. The workflow engine will go for activity to activity and execute the code within each of them. The project workflows have to be designed using the Workflow Designer of Visual Studio 2010. By using the new features of Visual Studio 2010, the workflow can be packaged and deployed like SharePoint Server features. The workflow services can use different type of activities that are summarized in this diagram:

Page 38

Figure 29: Project Server workflow services

The specific Project workflow activities are listed in chapter 5.9.2. These Project activities are using internally Project Workflow services that are calling the standard PSI API. If you define your own custom activities you can also use the Project Server API using PSI.

5.3

Relations between Project Server Objects and Visual Studio orchestration

The relation between the Project Server objects and the Visual Studio workflow orchestration is illustrated in this diagram:

Page 39

Figure 30: Relation between Project Server and Visual Studio objects

The Custom Fields (CFs) are user input fields that can be used in Visual Studio code to make a decision based on the value or to store the value. The Project Detail Pages (PDPs) are Web Part pages that hold Custom Fields. The Stages hold one or more PDPs. The Phases group Stages together. So from a user perspective, as the user goes from stage to stage he/she is exposed to a different set of pages, of which we expose different types of information. And it is the workflow that decides which stages will appear, and in what order, based on the sequence you have defined with the Visual Studio designer. In this diagram you see how when you are creating the workflow from within Visual Studio you reference the different objects that reside within Project Server. In this example, we have an activity at the top that points to Stage 1; this tells the workflow that Stage 1 should be displayed first. The following activity does an If/Else logic based off a value found within a CF. And then, depending on that outcome, we have additional activities that either point to different stages or terminate the workflow.
Page 40

So the key point is that you do not set the stage order inside of Project Server. Project Server has no idea what orders these stages that reside within it should be in. The ordering is completely dictated by the workflow, and this is the orchestration of the workflow.

5.4

Development Tasks with Visual Studio 2010

Here is the list of all the basics tasks that need to be done to start developing a workflow with Visual Studio 2010. Initial steps
Install SharePoint Server 2010, Project 2010, and Visual Studio 2010 on a single server. This is described on TechNet: http://technet.microsoft.com/en-us/library/cc197667.aspx Configure Visual Studio 2010 for Project 2010 Workflow development. This is described in the Project Server SDK on MSDN: http://msdn.microsoft.com/en-us/library/ee767686.aspx Use.NET Framework 3.5 Must be installed on the same computer as Project Server Developer must have administrative rights on the server computer and SharePoint farm. Define your activities Toolbox Add Project Server Workflow activities Add SharePoint Server Workflow activities

Use Visual Studio 2010

Visual Studio 2010 must be started as an administrator Create a project of type Sequential Workflow The necessary libraries are added as reference to your Visual Studio project. Define variables to store the GUID of Project Server objects like Custom Fields Lookup Table Values Stage Group or Specific Resources Define Workflow in Visual Studio 2010 using the Designer tool Use only Sequential Workflow Add activities Build Deploy on local server Create/Update the EPT in Project Server that uses this workflow Debug/Test your workflow

How to redeploy an updated version => use a script (See chapter 5.7)
Stop services and IIS Update in the GAC Restart services

5.5

List of the objects to create in Visual Studio 2010

The following objects are created in Visual Studio 2010 to define the orchestration of the workflow for our example.

Page 41

Objects
Project Workflow Project Server Activities

List SequentialWorkflowActivity ProjectSequence SetProjectStage OnProjectSubmit ReadProjectProperty ReadProjectSecurityGroupMembers UpdateProjectStageStatus CompareProjectProperty

SharePoint Server Activities

OnWorkflowActivated OnTaskAssigning OnTaskProcessStarted EndTaskProcess SendEmail SetTaskField OfficeTask (Approval) CheckExitConditions

Workflow Activities

IfElseBranchActivity IfElseActivity SequenceActivity CodeActivity TerminateActivity

Custom activities Variables to store GUID

GrantPermissionsToProject IdeaCollectionStageUid LeadApprovalStageUid CancelledStageUid SelectionStageUid

Page 42

ExecutionStageUid PostMortemStageUid ScheduleProjectUid FundingRequiredUid FundingRequiredYesLTValueUid ProjectManagerUid

Figure 31: List of Visual Studio objects to create/use

These different activities will be detailed in the following chapters. You can also create some custom Web Parts that you can use in your PDP pages, but this out of the scope of this document.

5.6
5.6.1

How to (In Visual Studio 2010)

Setting up the toolbox in Visual Studio

You need to add some specific objects to the Toolbox, to ease the development of the Project Server workflow. By default the Toolbox has the following tabs:

Figure 32: Updating the Visual Studio Toolbox

In order to design our workflow we have to add two tabs to the Visual Studio Toolbox.
Project Server Workflow Activities SharePoint Server Workflow Activities

This procedure is described in detail in MSDN here: http://msdn.microsoft.com/enus/library/ee767686(v=office.14).aspx#pj14_ConfiguringVS2010_ProjectServerTab Actions Screen

Page 43

In Visual Studio Solution Explorer, expand the Workflow1 node, and then double-click the Workflow1.cs file to open the Sequential Workflow design view. On the View menu, click Toolbox, and then pin the Toolbox pane open. Right-click a blank area in the Toolbox pane, and then click Add Tab. For example, name the tab Project Server Workflow.

Right-click under Project Server Workflow and select Choose Items within the newly created tab.

In the Choose Toolbox Items dialog box, click the System.Workflow Components tab, and then click Browse. Navigate to the Microsoft.Office.Project.Server.W orkflow.dll assembly in [Program Files]\Microsoft Office Servers\14.0\Bin, and then click Open.

The ten specific Project Server Activities highlighted are added to the toolbox tab after you select OK.

Page 44

Figure 33: Steps to update the Visual Studio toolbox for Project Server Activities

Do the same from the SharePoint Server Workflow Activities. Action

Create a new tab and name it SharePoint Server Workflow.

Screen

Select the assembly: Microsoft.Office.Workflow.Action s.dll from the Directory [Program Files]\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI

Page 45

The specific Office Workflow Activities highlighted are added to the toolbox tab after you select OK.

Page 46

Figure 34: Steps to update the Visual Studio toolbox for SharePoint Server Activities

Page 47

5.6.2

Creating a new Project

To create a new Visual Studio 2010 project so that you can create Project 2010 workflows: Actions
Start Visual Studio 2010 connected as an administrator

Screen

Create a new project, choosing the following template:

SharePoint 2010 Sequential Workflow

in Visual C#

And .Net Framework 3.5

And selecting a name for the project workflow: here ContosoSampleProjectWorkflow

This starts the SharePoint Customization Wizard Define the server where the workflow will be initially deployed Enter the URL: here http://project.contoso.com/PWA1 and select the Validate button You must choose Deploy as a farm solution.

Page 48

A connection to the server is validated. Select the Next button.

Enter the name of the workflow (or use the one proposed): Here ContosoSampleProjectWorkflow - Workflow1 And select Site Workflow. Click Next.

Keep the default proposed values and click Next. Note: If you want to define your own custom approval tasks library, you could choose your specific task lists here. By default it uses the default task approval library created with the Project Web App instance.

Page 49

Click Finish.

This prepares Visual Studio to use the Workflow designer.

Figure 35: Steps to create a Visual Studio project for Project Server workflows

5.6.3

Initial Step

The first activity you must put in your Project Server workflow is the wrapper ProjectSequence Activity, which will contain all your workflow activities. Actions Add a Project Sequence activity just

Screen

Page 50

Bind the necessary properties: InitiationData Select the yellow icon to bind the InitiationData Property to the workflow.

Page 51

Expand onWorkflowActivated1, then expand WorkflowProperties, and then select InitiationData to finish the binding.

Figure 36: Steps to insert the initial activities in the Visual Studio project

5.6.4

Adding more activities with the designer

Actions Open the generated Workflow1.cs source file Update the Using clause

Screen
using Microsoft.Office.Project.Server.Library; using System.Text;

Page 52

Add a reference to the library: Microsoft.Office.Workflow.Actions

Add the code to hold the GUID variables. Currently the GUID are set to null value; they will be completed later

#region Variables //workflow stages used in this workflow public Guid IdeaCollectionStageUid = new Guid("00000000-0000-0000-0000-000000000000"); public Guid LeadApprovalStageUid = new Guid("00000000-0000-0000-0000-000000000000"); public Guid CancelledStageUid = new Guid("00000000-0000-0000-0000-000000000000"); public Guid ExecutionStageUid = new Guid("00000000-0000-0000-0000-000000000000"); public Guid PostMortemStageUid = new Guid("00000000-0000-0000-0000-000000000000"); //Funding Required public Guid FundingRequiredUid = new Guid("00000000-0000-0000-0000-000000000000"); public Guid FundingRequiredYesLTValueUid = new Guid("00000000-0000-0000-0000000000000000"); public bool RequiresFundingResult; //Project Manager public Guid ProjectManagerUid = new Guid("00000000-0000-0000-0000-000000000000"); //office task variables public String officeTaskOutcomes = "Approved, ;Rejected,"; public bool approvalResult = false; public Object TaskTitle = new System.Object(); // this is the Approval ContentTypeID of the Project Server Approval form public String ProjectServerApprovalContentTypeID = "0x0108010038A52C27344148C9B9214F82C7C02985";

//user group used for approval PSSecurityGroup.Team Leads public Guid TeamLeadGroup = new System.Guid(PSSecurityGroup.TeamLeads.ToString()) ; public string[] TeamLeads; //for send email activity public String[] projectName = default(System.String[]); public String[] projectOwnerEmail = default(System.String[]);

Page 53

public String[] ProjectOwnerDisplayName = default(System.String[]); #endregion

Set up the project stage by adding a SetProjectStage activity. The SetProjectStage Activity can be found in Project Server Workflow Toolbox.

Set up some properties

AlwaysWait: set to True will stop the workflow at this stage. The workflow will also stop (even if set to False) if there are Required Custom fields that need to be filled in by the user.

Page 54

StageOrder: Set the order in which the Workflow is shown on the Workflow Status Page. We can use the numbering that was defined in the stage names. StageUid: Define the Guid of the Project stage coming from the Project Server configuration. Either using a direct value (only for a quick test) or Using a local variable (better for clarity and maintenance)

WorkflowContext: Set the workflowContext of the activity by selecting ProjectSequence1.WorkflowContext

Properties

Page 55

In the designer, add an activity to create a sequence activity that will contain a compare activity. CompareProjectProperties The SequenceActivity can be found in the Windows Workflow v3.0 toolbox.

The Compare Activity can be found in Project Server Workflow Toolbox (that you added earlier).

Page 56

Fill up the values Name: CompareFundingRequired

MDPropUI to our variable FundingRequiredUID WaitUntilValueisSet to True WorkflowContext to our ProjectSequence Workflow context CodePropertyvalue to FundingRequiredYesyLTValueUID

Page 57

Add an IfElseActivity from the Windows Workflow 3.0 Toolbox

Implement a function to test the condition

Page 58

The Code to add for the function: IsFundingRequired

#region TestFunding Required private void IsFundingRequired(object sender, ConditionalEventArgs e) { e.Result = RequiresFundingResult; } #endregion

Add a Sequence Activity for the LeadApproval Stage

setProjectStage for Lead Approval

Page 59

Add an activity ReadProjectSecurityGroupMembers from the Project Server Toolbox Name: IdentifyTeamLeadsForApproval GroupMembersLoginName = TeamLeads SecurityGroupUid=TeamLeadGroup workflowContext=WorkflowContext

Add an activity updateProjectStageStatus from the Project Server Toolbox so that the user can have an update to the running workflow.

Page 60

Add an activity ReadProjectProperty from the Project Server Toolbox Set the values for: Name PropertyValues PropertyName Workflowcontext

Add some code for handling workflow Context and the variable wfContext. Update the Dispose method and the default constructor

public Workflow1() { wfContext = new Microsoft.SharePoint.WorkflowActions.WorkflowCont ext(); InitializeComponent(); } public SPWorkflowActivationProperties workflowProperties { get; set; } // to manage the workflow Office Tasks public Microsoft.SharePoint.WorkflowActions.WorkflowCont ext wfContext { get; set; } protected override void Dispose(bool disposing)

Page 61

{ base.Dispose(disposing); if (disposing) { wfContext.Dispose(); workflowProperties.Dispose(); } }

Add an activity, OfficeTask, from the SharePoint Server Toolbox for handling the approval of the project. Add the three activities from the SharePoint Server Toolbox : OnTaskProcessedStarted OnTaskAssigning CheckExitConditions

Initialize the different fields for the Office Task Name: approvalProcess __ActivationProperties: workflowProperties __Context: wfContext ContentTypeID: ProjectServerApprovalContentTypeID Outcomes: officeTaskOutcomes

Page 62

In the onTaskProcessStarted add a Code Activity from the Windows Workflow toolbox and name it: onTaskStartedBuildApprovers

Initializing the workflow context objects with the method

onWorkflowActivated1_Invoked

private void onWorkflowActivated1_Invoked(object sender, ExternalDataEventArgs e) { wfContext.Initialize(workflowProperties); }

Bind this method with the Invoked Handlers in the onWorkflowActivated1 Action

Code for Approval Process: Method BuildApprovers to assign a task to all the approvers in the TeamLeads security group. Method FormatApprovers to build the string for the Office Task for each approver Method VerifyExitCondition to check the exit condition for the task Method IfIdeaNotApproved to get approval status

#region Approval process private void BuildApprovers(object sender, EventArgs e) { CodeActivity Sender = (CodeActivity)sender; Microsoft.Office.Workflow.Actions.OfficeTask currentApprover = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask; currentApprover.AssignedTo = FormatApprovers(TeamLeads); TaskTitle = Review project + projectName[0]; } private static string FormatApprovers(string[] list) { if (list == null)

Page 63

return String.Empty; StringBuilder strbuilder = new StringBuilder( @<my:Assignments xmlns:my=http://schemas.microsoft.com/office/inf opath/2003/myXSD xmlns:pc=http://schemas.microsoft.com/office/inf opath/2007/PartnerControls> <my:Assignment>); foreach (string s in list) { strbuilder.AppendFormat( <my:Assignee> <Person> <DisplayName />

<AccountType>User</AccountType> <AccountId>{0}</AccountId> </Person> </my:Assignee>, s); } strbuilder.AppendFormat( @ <my:AssignmentType>Parallel</my:AssignmentType> </my:Assignment> </my:Assignments>); return strbuilder.ToString(); } private void VerifyExitCondition(object sender, ConditionalEventArgs e) { IfElseBranchActivity Sender = (IfElseBranchActivity)sender; Microsoft.Office.Workflow.Actions.OfficeTask officeTask = Sender.Parent.Parent.Parent as Microsoft.Office.Workflow.Actions.OfficeTask; if (officeTask == null) return; if (officeTask.TaskResults[Approved] != null) { e.Result = true; approvalResult = true; } else { e.Result = true; approvalResult = false; } } private void IfIdeaNotApproved(object sender, ConditionalEventArgs e) { e.Result = !approvalResult; //If project is approved approvalResult == true => Result must be negated } #endregion

Page 64

In the onTaskStartedBuildApprovers activity, bind the ExecuteCode handler to the method BuildApprovers In the OnTaskAssigning1 Action add the two activities setTaskField to initialize the task field and the task title SetTaskField: ProjectUid Set TaskTitleField: TaskTitle

In the CheckExitConditions activity add an IfElseActivity Bind the ifelse condition to the method VerifyExitCondition Add an endTaskProcess1 activity to exit the approval process once the condition is met. In our case at least one approver has answered

Page 65

After the approval process, add an IfElse Activity and named it IfElseProjectRejected.

Bind the If condition to the method IfIdeaNotApproved

Add a Sequence Activity and name it Cancelled.

Add a SetProjectStage Activity and name it: Name: setCancelledStage stageOrder: 3 StageUid: CancelledStageUid WorkflowContext: WorkflowContext

Page 66

Add a TerminateActivity from the Windows Workflow v3.0 Toolbox Project cancelled so Workflow isterminated Update the Error field with an error Message

After the ifElseActivity and out of the IfFundingRequired sequence add a Sequence Activity and name it: ProjectExecution when project is Approved either after approval or if no Funding was required.

Page 67

Add a SetProjectStage activity Name: setProjectExecutionStage StageOrder: 4 StageUid: ExecutionStageUid WorkflowContext

Add the code to handle the Send Email activity

#region SendEmail public String[] projectManagerValue = default(System.String[]); public Microsoft.Office.Project.Server.Schema.ResourceDa taSet ReturnedResourceData = new Microsoft.Office.Project.Server.Schema.ResourceDa taSet(); private void SendingEmail(object sender, EventArgs e) { SendEmail email = (SendEmail)sender; if ((projectName != null) && (projectName.Length != 0) && (projectName[0] != string.Empty)) { //fill in email subject if project name is not empty email.Subject = String.Format(Project {0} has been selected , projectName[0]); email.Body = String.Format(Youre listed as PM Owner for the following project: - <I> {0} </I>.<BR> Please create the detailed project plan. <BR> {1} <BR><BR> Thanks, <BR> Workflow Group, projectName[0], GetProjectUrl()); } else { email.Subject = string.Empty; email.Body = string.Empty; } if ((ReturnedResourceData != null) && (ReturnedResourceData.Resources.Count == 1)) Page 68

{ //send it to email.To = ReturnedResourceData.Resources[0].WRES_EMAIL; } else { email.To = [email protected]; } } private string GetProjectUrl() { return workflowProperties.WebUrl + /projectdrilldown.aspx?projUid= + projectSequence1.WorkflowContext.ProjectUid; } #endregion

Add ReadProjectProperties to get the PM name Name: toReadProjectManager PropertyValues: projectManagerValue MdPropUid: ProjectManagerUid WorkflowContext: WorkflowContext

Add a SendEmail activity from the SharePoint Workflow toolbox Name: sendEmailtoPM CorrelationToken: workflowToken MethodInvoking: SendingEmail

Page 69

Add an updateProjectStageStatus activity Name: updateProjStageStatusWaitForSubmit StageUid: ExecutionStageUid StatusInformation Please hit submit once project is complete UpdateProjectStatusField: Waiting for Input WorkflowContext: WorkflowContext

Add an OnProjectSubmit activity Name: onProjectSubmit1 WorkflowContext: WorkflowContext

Page 70

Add a SequenceActivity PostMortemStage

Add setProjectStage Name: setPostMortemStage StageOrder: 5 StageUid : PostMortemStageUid WorkflowContext ProjectSequence1.WorkflowContext

At this stage, build your solution. You should have no errors. Before deploying it we have to update the code with the correct GUID
Figure 37: Steps to create the workflow in Visual Studio

Page 71

5.6.5

Get the GUID from Project Configuration

You need to use the GUID of the object defined in the Project Server configuration, when setting some properties on the Workflow activities in Visual Studio. We have defined variables that will hold these values. We need now to get the real Guids Actions Getting the stage GUID Directly by copy pasting the Guid from the Project Server setting page. Go to Server Settings\Workflow Stages\ Open the Stage 2 possibilities: In the URL Screen

Or by using the System Identification Data section (at the end of the Stage page)

In our example we need the GUID for the 5 stages: Idea Collection Lead Approval Cancelled Execution Post Mortem We can update our code with the

#region Variables //workflow stages used in this workflow new Guid(00000000-0000-0000-0000000000000000); public Guid IdeaCollectionStageUid = new Guid(0bea837d-e632-45d2-b2535b3b9f383c86); public Guid LeadApprovalStageUid = new Guid(04b334fa-3e9a-49fd-aaadc710fd8d8198); public Guid CancelledStageUid = new Guid(4631c35a-2316-4940-bfd1-eeae9a60b2d8); public Guid ExecutionStageUid = new Guid(c363dcc4-94bb-46e7-8477-52042dcd28ee); public Guid PostMortemStageUid = new Guid(7d4e4a4f-518a-493d-9d20-1d4360f4fcb1);

Page 72

correct values.

And for the Custom fields and Lookup tables FundingRequired FundingRequired Yes value ProjectManager We can update our code with the correct values. Note: you will need to replace the values with your specific GUID values.
Figure 38: Finding the GUIDs for the Project Server objects

//Funding Required public Guid FundingRequiredUid = new Guid("64d3274c-d242-4e25-9341-828db99b14a9"); public Guid FundingRequiredYesLTValueUid = new Guid("2324b22f-d523-4a87-8263-81e0ce500105"); public bool RequiresFundingResult; //Project Manager public Guid ProjectManagerUid = new Guid("c3d6ec22-0862-43a6-b3a0-91d5c1eb03fb");

At this point we can now test and run our workflow from Project Server after deploying it.

5.7
1. 2. 3. 4.

Deploy the workflow

The following steps are needed to be able to use the workflow in Project Server.
Deploy the workflow by using Visual Studio or the WSP package. Restart three separate services. Create a workflow association to the DLL. Associate the workflow to an Enterprise Project Type (EPT).

Here is the script to restart the three services:

Net stop SPTimerV4 Net stop ProjectQueueService14 Iisreset.exe /stop Iisreset.exe /start Net start ProjectQueueService14 Net start SPTimerV4 Pause Figure 39: Script to restart the 3 services after the deployment

5.7.1
Actions

Using Visual Studio automatic deployment

Screen

To deploy the workflow using Visual Studio. Select the solution ContosoSampleProjectWorkflow and

Page 73

right-click: Select Deploy. This will recompile your solution, package it, and deploy it in the site

Then you need to restart the three following processes: SharePoint Timer ProjectQueueService IIS This can be automated in a simple batch file like the one presented here. If you do not recycle these processes, the latest version will not be used until these processes are restarted.

Net stop SPTimerV4 Net stop ProjectQueueService14 Iisreset.exe /stop Iisreset.exe /start Net start ProjectQueueService14 Net start SPTimerV4 Pause

You then need to check the workflow association on your SharePoint site: Go to Site Settings in Project Web App In the Site Administration section, select: Workflow settings

Page 74

You should see your newly deployed Workflow.

If you click on the workflow ContosoSampleProjectWorkflow, you will see the settings of this workflow.

You can now make the association with your EPT. Go to Project Server settings in PWA in the Workflow and Project Detail Pages, Select Enterprise Project Types (EPT)

Select the EPT Contoso Project

You need to associate or re-associate the newly deployed Workflow with the EPT. Select ContosoSampleProjectWorkflow Workflow1

Page 75

You are now ready to use your Workflow.

Figure 40: Steps to deploy your workflow using Visual Studio

5.7.2

Using a WSP package

You have to use a WSP package if you have to deploy the solution on server where you do not have Visual Studio installed.

Actions In order to build the WSP package of the solution, just select the Build menu Select the solution ContosoSampleProjectWorkflow and right-click: Select Build. This will compile your solution, package it, and generate a WSP package in the bin directory of your solution.

Screen

Take the WSP file ContosoSampleProjectWorkflow.wsp and copy it on your target server to the directory C:\DeployPSS

Page 76

Start an administrator Windows PowerShell command window.

Add-SPSolution -LiteralPath C:\DeployPSS\ContosoSampleProjectWorkflow.wsp Use the following Windows PowerShell commands to add the solution to the Farm.

Install the solution

Install-SPSolution Identity ContosoSampleProjectWorkflow.wsp GacDeployment Enable-SPFeature -Identity ContosoSampleProjectWorkflow _Feature1 -Url http://project.contoso.com/pwa1

Enable the feature in the Project Web App site collection.

You can verify that the feature is activated at the Site collection level.

Then, to enable the creation of workflow instance, go to Site Settings in Project Web App. In the Site Administration section, select: Workflow settings

Select Add a workflow Or the workflow if this is a Refresh

Page 77

Select the Workflow that you have just deployed. Give it the name that will be visible to the user of the site.

Go to the EPT and make the association (see previous chapter).

Figure 41: Steps to deploy your workflow using a WSP package

5.8

Developing your own custom activity

In our example we need a specific Activity to update the permissions of the project so that the selected Project Manager can act as a Project Manager in Project Server 2010. The source code for this Activity is part of the samples of the Project Server 2010 SDK, which can be downloaded here: http://www.microsoft.com/downloads/details.aspx?FamilyID=46007f25-b44e-4aa6-80ff9c0e75835ad9&displaylang=en To develop you own custom activity, you need to follow the following steps:
1. Create a class library - Workflow - Workflow Activity Library that uses Framework 3.5

To use this custom activity in your own custom workflow:

2. Set a reference to the ActivityLibrary.dll assembly. 3. Add the custom activity to the toolbox. 4. Add the custom activity to you Visual Studio designer view and fill in the properties.
Page 78

5. Build and create the deployment package.

Extra steps to deploy the workflow with your custom activity:

1. Deploy in the GAC your ActivityLibrary.dll assembly: 2. Update the Web.config file of the Project server Web application in the WorkflowServices element to include a reference to the assembly.

To have all the detail steps see the document included in the sample of the Project Server SDK: Creating and Using a Custom Project Server Workflow Activity.

Action We will add the custom Activity Project to our current Visual Studio solution. Select the menu Add Existing Project Go to the directory: C:\Program Files (x86)\Microsoft SDKs\Project2010SDK\Samples\Workfl ow\CustomActivityWorkflow\ActivityLi brary and add the ActivityLibrary project Build the project.

Screen

Page 79

Add a reference to this Activity library assembly to the ContosoSampleProjectWorkflow project references.

The new activity is now available in the Toolbox:

In our example, add this activity before the SendEmailToPM activity.

Page 80

Set up the properties: Name: grantPMPermissionsToProject ResourceData: ReturnedResourceData ResourceName: projectManagerValue[0] SaveProjectPermission: True ViewProjectDetailsPermission: True ViewProjectSummaryPermission: True ViewWorkspacePErmssion: True WorkflowContext: WorkflowContext

Deploy the new solution by using Visual Studio. Add the Activity Library .dll assembly in the GAC Update the Web.config file of the Web application that contains the Project Server application to include the custom activity. This line needs to be added in the <WorkflowServices> section. <WorkflowService Assembly="ActivityLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken= 829247b93decd642" Class="ActivityLibrary.CustomWorkflowService" />

If you forget to update the Web.config file or if the Activiy Library is not deployed in the GAC, the workflow will fail to start.

Page 81

Figure 42: Steps to add a custom Activity to our workflow project

5.9

Development Best practices and Guide

Here are some general best practices that you can follow to ease the maintenance of your custom Workflow.

5.9.1

Best practices
Context Define all your strings in local variables so that you can reference these variables when using the Workflow Designer in Visual Studio. Add error handling code to handle specific case or unexpected events Remarks Using variable to hold constants brings a single point of maintenance to ease the maintenance. It is also better for preparing the code for localization. It makes the code more robust.

You need to add error handling code to your workflow. There are specific handlers that can be used: Fault and cancel handlers. These are described in the SDK in this article for example http://msdn.microsoft.com/en-us/library/dd695716.aspx

Use the Enable Each workflow activity has an Enabled property. An activity can be easily Property in an disabled by setting this property to False. Activity, to temporarily disable an activity that is creating a problem. How to Use the Skip to stage feature redeploy a new version of http://blogs.msdn.com/project_programmability/archive/2010/02/10/howto-use-the-skip-to-stage-feature-in-project-server-2010-workflows.aspx a workflow, and manage the currently running

Page 82

workflow: Caution when When you do a copy/paste of GUID from the PWA interface, a control copying or characters is added that may interfere with the real value. pasting a GUID from the PWA interface
Figure 43: List of Best Practices

5.9.2

Description of Activities in a Nutshell

Description and list of activities you can use (the most used): Activity Name Project Server Specific (Microsoft.Office.Project.Server.Workflow) CompareProjectProperty Purpose

An activity that will compare the value of a project Custom or intrinsic Field and return True/False An activity that will pause the workflow until a Project Checkin Event happens for the current project An activity that will pause the workflow until a Project Commit Event happens for the current project. This event happen when a project is selected within the Portfolio Analysis feature. An activity that will pause the workflow until a Project Submit Event happens for the current project A wrapper activity that must be the second activity in the workflow (right after onWorkflowActivated). All following activities must be placed within this activity and will need to inherit the workflow context. An activity that will return the value of a Project Custom or intrinsic field An activity that will return all of the members of a particular security group within Project Server, with or without filtering based on

OnProjectCheckin

OnProjectCommit

OnProjectSubmit

ProjectSequence

ReadProjectProperty

ReadProjectSecurityGroupMembers

Page 83

department. SetProjectStage This activity defines when a stage starts. Stages that are created within Project Server are referenced directly by using this activity. An activity used to update an intrinsic or custom field

UpdateProjectProperty

UpdateProjectStageStatus

Updates the status message for a stage. You should add the UpdateProjectState activity only if you want to communicate to the end user what's going on with the project (for example - Waiting for Approval, Waiting for Portfolio)

Figure 44: Description of Project Server workflow activities

Full details can be found here: http://msdn.microsoft.com/en-us/library/ee756398.aspx

Activity Name SharePoint Specific (Microsoft.SharePoint.WorkflowActions) OnWorkflowActivated

Purpose

Responds to the event that Microsoft SharePoint Foundation raises when a new workflow instance is initiated for an item Creates and sends an e-mail message to the specified users

SendEmail

Figure 45: Description of SharePoint workflow activities

Full details can be found here: http://msdn.microsoft.com/en-us/library/ms473641.aspx

Page 84

Activity Name SharePoint Server Specific (Microsoft.Office.Workflow.Actions) Office Task

Purpose

This activity is for the generalized extensible execution of assigning work to users and responding to the completion of work in a repeatable contained way Creates a copy of the current task and assigns it to a specified user. Both copies of the task must be completed for the original task to be considered complete. Effectively reassigns a workflow task to the task owner's manager. An activity that is executed before a task is created and sent to a specified user. Executes when a task is first created, but before the task is assigned to users. A workflow activity used to assign values to a specified field for a task item such as AssignedTo, Title or DueDate. Forcefully ends the task process, regardless of the completion status of existing tasks. in other words, it ends tasks that may be incomplete. A sequential workflow activity that contains conditional logic. This activity must be a direct child of an OfficeTask activity.

ForwardTask

EscalateTask

OnTaskAssigning

OnTaskProcessStarted

SetTaskField

EndTaskProcess

CheckExitConditions

Figure 46: Description of SharePoint Server (Office Task) workflow activities

Full details can be found here: http://msdn.microsoft.com/en-us/library/ee590729.aspx

Activity Name Workflow General (System.Workflow.Activities) Code

Purpose

Runs the code-beside method associated with

Page 85

an activity IfElse Activity Conditionally runs one of two or more activities of type IfElseBranchActivity Represents a branch of an IfElseActivity Runs a set of child activities according to a single defined ordering Terminates execution of workflow

IfElseBranchActivity SequenceActivity

TerminateActivity
Figure 47: Description of Windows workflow activities

Full details can be found here: http://msdn.microsoft.com/en-us/library/ms594882.aspx

5.9.3

Source code of the sample

Here is the full code of the sample code:

Page 86

using using using using using using using using using using using using using using using using using using using

System; System.ComponentModel; System.ComponentModel.Design; System.Collections; System.Drawing; System.Linq; System.Workflow.ComponentModel.Compiler; System.Workflow.ComponentModel.Serialization; System.Workflow.ComponentModel; System.Workflow.ComponentModel.Design; System.Workflow.Runtime; System.Workflow.Activities; System.Workflow.Activities.Rules; Microsoft.SharePoint; Microsoft.SharePoint.Workflow; Microsoft.SharePoint.WorkflowActions; Microsoft.Office.Project.Server.Library; System.Text; System.Diagnostics; // for launching the debugger Debugger.Break

namespace ContosoSampleProjectWorkflow.Workflow1 { public sealed partial class Workflow1 : SequentialWorkflowActivity { public Workflow1() { wfContext = new Microsoft.SharePoint.WorkflowActions.WorkflowContext(); InitializeComponent(); } public Guid workflowId = default(System.Guid); public SPWorkflowActivationProperties workflowProperties { get; set; } // to manage the workflow Office Tasks public Microsoft.SharePoint.WorkflowActions.WorkflowContext wfContext { get; set; } protected override void Dispose(bool disposing) { base.Dispose(disposing); if (disposing) { wfContext.Dispose(); workflowProperties.Dispose(); } } private void onWorkflowActivated1_Invoked(object sender, ExternalDataEventArgs e) { wfContext.Initialize(workflowProperties); }

Page 87

#region Variables //workflow stages used in this workflow new Guid("00000000-0000-0000-0000000000000000"); public Guid IdeaCollectionStageUid = new Guid("0bea837d-e632-45d2-b253-5b3b9f383c86"); public Guid LeadApprovalStageUid = new Guid("04b334fa-3e9a-49fd-aaad-c710fd8d8198"); public Guid CancelledStageUid = new Guid("4631c35a-2316-4940-bfd1-eeae9a60b2d8"); public Guid ExecutionStageUid = new Guid("c363dcc4-94bb-46e7-8477-52042dcd28ee"); public Guid PostMortemStageUid = new Guid("7d4e4a4f-518a-493d-9d20-1d4360f4fcb1"); //Funding Required public Guid FundingRequiredUid = new Guid("64d3274c-d242-4e25-9341-828db99b14a9"); public Guid FundingRequiredYesLTValueUid = new Guid("2324b22f-d523-4a87-826381e0ce500105"); public bool RequiresFundingResult; //Project Manager public Guid ProjectManagerUid = new Guid("c3d6ec22-0862-43a6-b3a0-91d5c1eb03fb");

//office task variables /// This is the string that is bound with the SharePoint OfficeTask activity. public String officeTaskOutcomes = "Approved, ;Rejected,"; public bool approvalResult = false; public Object TaskTitle = new System.Object(); // this is the Approval ContentTypeID of the Project Server Approval form public String ProjectServerApprovalContentTypeID = "0x0108010038A52C27344148C9B9214F82C7C02985"; //user group used for approval - PSSecurityGroup.Team Leads public Guid TeamLeadGroup = new System.Guid(PSSecurityGroup.TeamLeads.ToString()); public string[] TeamLeads; //for send email activity public String[] projectName = default(System.String[]); public String[] projectOwnerEmail = default(System.String[]); public String[] ProjectOwnerDisplayName = default(System.String[]); #endregion #region TestFunding Required private void IsFundingRequired(object sender, ConditionalEventArgs e) { e.Result = RequiresFundingResult; } #endregion #region Approval process private void BuildApprovers(object sender, EventArgs e) { CodeActivity Sender = (CodeActivity)sender; Microsoft.Office.Workflow.Actions.OfficeTask currentApprover = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask; currentApprover.AssignedTo = FormatApprovers(TeamLeads); TaskTitle = "Review project " + projectName[0]; }

Page 88

private static string FormatApprovers(string[] list) { if (list == null) return String.Empty; StringBuilder strbuilder = new StringBuilder( @"<my:Assignments xmlns:my='http://schemas.microsoft.com/office/infopath/2003/myXSD' xmlns:pc='http://schemas.microsoft.com/office/infopath/2007/PartnerControls'> <my:Assignment>"); foreach (string s in list) { strbuilder.AppendFormat( <my:Assignee> <Person> <DisplayName /> <AccountType>User</AccountType> <AccountId>{0}</AccountId> </Person> </my:Assignee>", s); } strbuilder.AppendFormat( <my:AssignmentType>Parallel</my:AssignmentType> </my:Assignment> </my:Assignments>"); return strbuilder.ToString(); } private void VerifyExitCondition(object sender, ConditionalEventArgs e) { IfElseBranchActivity Sender = (IfElseBranchActivity)sender; Microsoft.Office.Workflow.Actions.OfficeTask officeTask = Sender.Parent.Parent.Parent as Microsoft.Office.Workflow.Actions.OfficeTask; if (officeTask == null) return; if (officeTask.TaskResults["Approved"] != null) { e.Result = true; approvalResult = true; } else { e.Result = true; approvalResult = false; } } private void IfIdeaNotApproved(object sender, ConditionalEventArgs e) { e.Result = !approvalResult; //If project is approved approvalResult == true => Result must be negated } #endregion #region SendEmail public String[] projectManagerValue = default(System.String[]);

@"

@"

Page 89

public Microsoft.Office.Project.Server.Schema.ResourceDataSet ReturnedResourceData = new Microsoft.Office.Project.Server.Schema.ResourceDataSet(); private void SendingEmail(object sender, EventArgs e) { SendEmail email = (SendEmail)sender; if ((projectName != null) && (projectName.Length != 0) && (projectName[0] != string.Empty)) { //fill in email subject if project name is not empty email.Subject = String.Format("Project {0} has been selected ", projectName[0]); email.Body = String.Format("You're listed as PM Owner for the following project: - <I> {0} </I>.<BR> Please create the detailed project plan. <BR> {1} <BR><BR> Thanks, <BR> Workflow Group", projectName[0], GetProjectUrl()); } else { email.Subject = string.Empty; email.Body = string.Empty; } if ((ReturnedResourceData != null) && (ReturnedResourceData.Resources.Count == 1)) { //send it to email.To = ReturnedResourceData.Resources[0].WRES_EMAIL; } else { email.To = "[email protected]"; } } private string GetProjectUrl() { return workflowProperties.WebUrl + "/projectdrilldown.aspx?projUid=" + projectSequence1.WorkflowContext.ProjectUid; } #endregion

} } Figure 48: Source Code of the workflow

Page 90

DEPLOY: DEPLOYMENT FROM DEV TO QA/PRODUCTION

6.1

Deployment of the solution on a QA and Production environment

Once you have developed your workflow on your development environment, you will want to deploy it on a QA environment and then a Production environment. We have already covered how you can deploy a workflow using the WSP package (see 5.7.2

Using a WSP package), but as you have understood now, we also need to create the associated
objects in the Project Server application (Phases, Stages, PDPs, Custom Fields, Lookup tables). Currently there are two automated solutions available: 1. Playbooks 2010 tool from the Resource kit 2. The Solution starter: EPT Export/Import DMExport/DMImport from Code Gallery

A manual way would be:

To manually create the Project Server objects on each environment To maintain the different values of the GUID of the objects of the different environments in the

variables. The right version of the values would be chosen using conditional compilation that would be triggered by the environment target.

6.1.1

Using the new 2010 Playbooks

A tool called Playbook is available. It has been updated for the 2010 version by adding the export/import of the workflow objects. This tool only handles the PWA objects. The workflow needs to be deployed also on the target system.

Actions Export the objects Start Playbooks Connect to the development Project Web App site: http://project.contoso.com/PWA1

Screen

Page 91

Select the Backup tab Enter a file name: ExportOfWorkflows.xml

Select the Workflow objects Select the Backup button

10:06:18 : Server URL set to http://project.contoso.com/pwa1 10:06:18 : Initializing Web Services... 10:06:23 : Running application PlaybooksMainForm 10:06:24 : Initializing Settings Tree... 10:10:34 : 10:10:34 : =============================================================================== ========================================= 10:10:34 : Backing up server settings to ExportOfWorkflows from server http://project.contoso.com/pwa1... 10:10:34 : =============================================================================== ========================================= 10:10:34 : 10:10:34 : Load settings from server: 10:10:34 : Loading Custom Fields and Lookup Tables... 10:10:36 : Loading Enterprise Project Types... 10:10:36 : Loading Workflow Phases... 10:10:36 : Loading Workflow Stages... 10:10:37 : Loading Project Detail Pages... 10:12:02 : Loading Workflow Proxy User... 10:12:03 : 10:12:03 : Write server settings to XML structure: 10:12:03 : Writing XML data for Custom Fields and Lookup Tables... 10:12:03 : Writing XML data for Enterprise Project Types... 10:12:03 : Writing XML data for Workflow Phases... 10:12:03 : Writing XML data for Workflow Stages... 10:12:03 : Writing XML data for Project Detail Pages... 10:12:03 : Writing XML data for Workflow Proxy User... 10:12:03 : 10:12:03 : Writing Playbook to disk...

On the new environment: Deploy the workflow solution Add the Contoso Sample Workflow

Use the steps described in 5.7.2 Using a WSP package to deploy the WSP package and add the workflow to the Site collection.

Page 92

Import the objects in the new environment using Playbooks. Connect to the new Project Web App: http://finweb.contoso.com/PWA2

Select the Restore tab. Enter the file name: ExportOfWorkflows.xml

The following objects are going to be restored Click the restore button

PlaybooksLogger Started 06/22/2010 10:30:35 10:30:35 : Running application ServerUrlForm 10:31:29 : Server URL set to http://finweb.contoso.com/PWA2 10:31:29 : Initializing Web Services... 10:31:52 : Running application PlaybooksMainForm 10:31:52 : Initializing Settings Tree... 10:34:56 : 10:34:56 : =============================================================================================== ========================= 10:34:56 : Reading server settings from E:\tools\playbooks\ExportOfWorkflows.xml 10:34:56 : =============================================================================================== ========================= 10:34:56 : 10:34:56 : 10:34:56 : Read settings from XML data: 10:34:56 : Reading XML data for Custom Fields and Lookup Tables... 10:34:56 : Reading XML data for Enterprise Project Types... 10:34:57 : Reading XML data for Workflow Phases... 10:34:57 : Reading XML data for Workflow Stages... 10:34:57 : Reading XML data for Project Detail Pages... 10:34:57 : Reading XML data for Workflow Proxy User... 10:36:12 : 10:36:12 : =============================================================================================== ========================= 10:36:12 : Restoring Settings to Server http://finweb.contoso.com/PWA2... 10:36:12 : =============================================================================================== ========================= 10:36:12 : Restoring Project Detail Pages... 10:36:56 : Updating PDP ID from 55672f8d-c9f9-4864-be7e-bd6a5ff127a5 to 55672f8d-c9f9-4864-be7ebd6a5ff127a5 10:36:56 : Updating PDP ID from 1f9d8fed-df74-4daf-af94-d327983c05e6 to 1f9d8fed-df74-4daf-af94d327983c05e6 10:36:56 : Updating PDP ID from cdee4f89-44f6-4bd8-a240-a713c0960c44 to cdee4f89-44f6-4bd8-a240a713c0960c44 10:36:56 : Updating PDP ID from 60ac4cf5-74f0-4858-97e3-416082396f3b to 60ac4cf5-74f0-4858-97e3416082396f3b 10:36:56 : Updating PDP ID from 029c1e30-a656-461b-9137-b9e79a6e355c to 029c1e30-a656-461b-9137b9e79a6e355c 10:36:56 : Updating PDP ID from 852159a7-dab1-4a80-a7b1-d061d290ca6d to 852159a7-dab1-4a80-a7b1d061d290ca6d 10:36:56 : Updating PDP ID from 0e30384b-9a15-4279-9f7c-cb187a96da19 to 0e30384b-9a15-4279-9f7c-

Page 93

cb187a96da19 10:36:56 : Updating PDP ID from 1292fc75-f992-444c-9a84-c69da35a104f to 1292fc75-f992-444c-9a84c69da35a104f 10:36:56 : Updating PDP ID from df32b008-02f8-4c79-b6c7-403093f46164 to df32b008-02f8-4c79-b6c7403093f46164 10:37:29 : Restoring Custom Fields and Lookup Tables... 10:37:30 : Updating lookup table Department... 10:37:30 : Creating lookup table Funding Required... 10:37:30 : Updating lookup table Sample Primary Objective... 10:37:30 : Updating lookup table Cost Type... 10:37:30 : Creating lookup table On Budget... 10:37:30 : Updating lookup table Health... 10:37:30 : Updating lookup table RBS... 10:37:30 : Updating lookup table Sample Areas Impacted... 10:37:37 : Updating Custom Fields... 10:37:42 : Updating custom field Sample Compliance Proposal... 10:37:44 : Updating custom field Sample Approved Start Date... 10:37:44 : Updating custom field Sample Proposal Cost... 10:37:44 : Updating custom field Cost Type... 10:37:45 : Creating custom field Reasons... 10:37:46 : Updating custom field Project Departments... 10:37:46 : Updating custom field Sample Post Implementation Review Date... 10:37:46 : Creating custom field On Budget... 10:37:47 : Updating custom field Health... 10:37:48 : Creating custom field Funding Required... 10:37:49 : Updating custom field Sample Areas Impacted... 10:37:49 : Creating custom field Proposed Project Manager... 10:37:49 : Updating custom field Sample Primary Objectives... 10:37:51 : Updating custom field Flag Status... 10:37:52 : Updating custom field Sample Business Need... 10:37:52 : Updating custom field Sample Proposed Start Date... 10:37:53 : Updating custom field Sample Proposed Finish Date... 10:37:53 : Updating custom field Sample Goals... 10:37:53 : Creating custom field Lessons Learned... 10:37:54 : Updating custom field Resource Departments... 10:37:54 : Updating custom field Sample Post Implementation Review Notes... 10:37:55 : Updating custom field Team Name... 10:37:55 : Updating custom field Sample Approved Finish Date... 10:37:56 : Updating custom field Sample Assumptions... 10:37:57 : Updating custom field RBS... 10:37:58 : Restoring Workflow Phases... 10:38:04 : Restoring Enterprise Project Types... 10:38:06 : Restoring Workflow Stages... 10:38:09 : Restoring Workflow Proxy User... 10:38:11 : Restoring relationships for Custom Fields and Lookup Tables... 10:38:11 : Restore complete! 10:38:11 :

Associate the EPT to the Workflow

Figure 49: Steps to Backup/Restore workflow configuration using Playbooks 2010

This tools exports all the workflows that are present in the PWA instance.

6.1.2

Solution starter EPT Export Import

This solution starter demonstrates how an Enterprise Project Type (EPT) and its related entities can be exported from one PWA environment and imported back into another. The import is done by registering a feature corresponding to the EPT and, on feature activation, creating all entities that support the EPT. It is composed of the two projects:

Page 94

 DMExport project DMImport project It can be downloaded from the following location: http://code.msdn.microsoft.com/P2010SolutionStarter

Page 95

DEBUG/MONITOR: TROUBLESHOOTING WORKFLOWS

In this chapter we will see how we can Debug a workflow during Development and also how to troubleshoot a workflow when it is running a workflow.

7.1

Debugging the workflow

In order to be able to debug your workflow you need to do the following:

1. Copy the PDB of your workflow assembly in the GAC 2. Attach the debugger to a specific process (Queue or w3p)

7.1.1

Copying the PDB of your assembly to the GAC

To be able to debug a workflow, you will also need to copy the PDB file of your assembly to the GAC. You can use a batch file like this one to do that:
Copy E:\ContosoSampleProjectWorkflow\ContosoSampleProjectWorkflow\bin\Debug\ContosoSampleProjectWor kflow.pdb C:\Windows\assembly\GAC_MSIL\ContosoSampleProjectWorkflow\1.0.0.0__a66c3f03618a253a Figure 50: Script to copy assembly to the GAC for debugging purposes

To locate the directory of your assembly in the GAC, use the command line and navigate to the directory C:\Windows\assembly\GAC_MSIL\YourAssemblyName You will then find the unique directory of your assembly.

7.1.2

Attaching the debugger

Depending on when you want to debug your workflow you will need to attach the Visual Studio debugger to different processes:
Queue process W3P process

You need to attach to the Queue process:

If you create a project If you restart a workflow from the server settings

You need to Attach to w3p: If you hit submit If you restart the workflow through the PDP page. To locate the right w3p process on your server, you can use the IIS command line administrative tool appcmd that is located in the C:\windows\System32\inetsrv directory: Appcmd list wp

Page 96

Figure 51: Example showing the use of appcmd to get the w3P process number

In this case the application pool is named projectAppPool1, so the w3P process is 6712. You can also use the techniques describe in this article to attach the debugger: http://blogs.msdn.com/b/sharepoint/archive/2007/04/10/debugger-feature-for-sharepoint.aspx

7.2

Troubleshooting a Workflow

For information on how to troubleshoot a workflow, see the following article: http://blogs.technet.com/b/projectadministration/archive/2009/12/21/how-to-troubleshoot-yourworkflows.aspx
Check the workflow status page Check the ULS logs

7.2.1

Check the workflow status page

There are two different ways to do this based on your need: Actions Check from within the project
Open a project with a failing

Screen

workflow
Go to the Stage Status Page.

(This is the very first page from within a workflow stage.) From within the workflow status page, expand the All Workflow Stages section.

Page 97

Click the Additional Workflow Data link, which is round at the bottom right.

If your project cannot be opened, you can also get to this page by: Site Actions, View All Site Content

Click Site Workflows

Click the Show All Workflows link

Find the workflow that you are concerned about.

Once you have opened the workflow status page, you can investigate the workflow history to see what the workflow was doing before it began to error.

Figure 52: Steps to troubleshoot a workflow

Page 98

7.2.2

View the ULS logs

1. ULS logs can be found in: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS o Suggestion: Create a desktop shortcut on the server to this location. 2. Logs will be broken up into pieces. Find the log with a time stamp as close to the time you are most concerned about, and open it. 3. Some key words to look for when going through the logs are: o SharePoint Foundation o Startworkflow o Winwf o entering...activity o leaving... activity 4. You can increase the logging level on the following categories from the central administration: http://servername:Port/_admin/metrics.aspx o Project Server: Project Server Workflow o SharePoint Foundation: Workflow Infrastructure

Page 99

8
8.1
Title

REFERENCES
General references
URL Reference www.microsoft.com/project/2010 http://technet.microsoft.com/projectserver

Project 2010 Web site Project Server 2010 TechCenter (TechNet) Project 2010 Resource Center (MSDN) Project 2010 Video content Project 2010 webcasts and podcasts Project 2010 Demo Image:

http://msdn.microsoft.com/Project

www.microsoft.com/showcase/en/US/channels/microsoftproject www.microsoft.com/events/series/epm.aspx?tab=webcasts

Download: http://go.microsoft.com/?linkid=9713956 Hosted Virtual Lab: http://go.microsoft.com/?linkid=9713654

Blogs Official Blog of the Product Development group Project Developer Project IT Pro

URL Reference http://blogs.msdn.com/project

http://blogs.msdn.com/project_programmability http://blogs.technet.com/projectadministration

Additional questions? Project 2010 Forums! http://social.msdn.microsoft.com/Forums/enUS/category/projectserver2010,projectprofessional2010

8.2

References given in this document

Document/Blo URL g

Page 100

Source Code for the sample presented Demand Management in Project Server 2010 How to Setup the Workflow Proxy Account

http://code.msdn.microsoft.com/PS2010DMSample

http://go.microsoft.com/fwlink/?LinkId=191854

http://blogs.technet.com/projectadministration/archive/2009/12/21/how-tosetup-the-workflow-proxy-account.aspx

Install http://technet.microsoft.com/en-us/library/cc197667.aspx SharePoint Server 2010, Project 2010 and Visual Studio 2010 on a single server Configure http://msdn.microsoft.com/en-us/library/ee767686.aspx Visual Studio 2010 for Project 2010 Workflow development in the Project Server SDK on MSDN Adding the : http://msdn.microsoft.com/enProject Server us/library/ee767686(v=office.14).aspx#pj14_ConfiguringVS2010_ProjectServerTa Activities and b SharePoint Server Activities in the Toolbox Project Server 2010 SDK http://www.microsoft.com/downloads/details.aspx?FamilyID=46007f25-b44e4aa6-80ff-9c0e75835ad9&displaylang=en

Error handling

http://msdn.microsoft.com/en-us/library/dd695716.aspx

Page 101

code to in a workflow Hot to use the Skip to stage feature Description of Project Server Workflow Activities Description of SharePoint Server Workflow Activities http://blogs.msdn.com/project_programmability/archive/2010/02/10/how-touse-the-skip-to-stage-feature-in-project-server-2010-workflows.aspx

http://msdn.microsoft.com/en-us/library/ee756398.aspx

http://msdn.microsoft.com/en-us/library/ms473641.aspx

Description of http://msdn.microsoft.com/en-us/library/ee590729.aspx SharePoint Server Office Task Workflow Activities Description of Windows Workflow Activities Solution starters for Project Server 2010 Debugging feature for SharePoint http://msdn.microsoft.com/en-us/library/ms594882.aspx

http://code.msdn.microsoft.com/P2010SolutionStarter

http://blogs.msdn.com/b/sharepoint/archive/2007/04/10/debugger-feature-forsharepoint.aspx

How to http://blogs.technet.com/b/projectadministration/archive/2009/12/21/how-totroubleshoot a troubleshoot-your-workflows.aspx workflow

Page 102

Page 103