SWOOP PLEASE USE THE ITEM NUMBER TO FIND THE

MODELYEAR: 2020 - PART IN OUR ONLINESHOP: BIKE-DISCOUNT.DE

NO. QTY. ITEM NO. DESCRIPTION 1

5 13
SWOOP LINKAGE/SEAT STAY BEARING SET
1 1 3935
BEARING DIMENSIONS: 2X „63801 2RS“
7 1
SWOOP ROCK MOUNT BEARING SET
14
2 1 3934
BEARING DIMENSIONS: 2X „3802 2RS MAX“
15
RENDER/SWOOP HORSTLINK BEARING SET
3 1 3923
BEARING DIMENSIONS: 4X „6802 2RS“
2

MAIN BEARING SET 8

4 1 10430 2
BEARING DIMENSIONS: 2X „6902 2RS“

5 1 3933 SWOOP SHOCK MOUNT BOLT BELOW

6 1 3926 SWOOP SHOCK MOUNT BOLT TOP 6

13
7 1 3938 SWOOP SEAT STAY PROTECTION LEFT
3 12
8 1 33695 SEAT STAY GUARD SWOOP 200 / 170 18 3 11
10
9 1 3937 SWOOP CA 170 CHAINSTAY PROTECTION
4 14
17
10 1 3188 SWOOP CA 170 CABLE GUIDE CHAIN STAY
15
11 1 - SCREW ISO 7380- 1 M5X10 A2 HEX 3

12 1 33718 RENDER HYBRID / JEALOUS HYBRID CABLE BUSHING

13 2 34383 PROTECTION STICKER FOR CABLES

4
9
14 2 - SCREW ISO 10642 M5X16 A2 HEX 3
16
15 2 3164 SWOOP CABLE BUSHING

16 1 3936 SWOOP DOWN TUBE PROTECTION

17 2 34018 NOISE DAMPER BRUSH

18 1 8651 DERAILLEUR HANGER

310.52.590F-
HEADSET COVER
CHOOSE THE SIZE OF THE HEADSET
19 1 ACROS 45/56 - ANGLE HEADSET 100 mm Depending on the frame size of the bike you have to mount the correct
HT100AM COMPRESSION RING
headset. There are three different versions of headset sizes.
310.52.590F-
20 1 ACROS 45/56 - ANGLE HEADSET 110 mm
HT110AM ANGULAR CONTACT
310.52.590F- BEARING
21 1 ACROS 45/56 - ANGLE HEADSET 120 mm
HT120AM
NO. FRAMESIZE HEADTUBE LENGTH
ANGLE CUP
19 M 100 mm

TECHNICAL SPECIFICATIONS 20 L 110 mm

ACROS ANGLE HEADSET ZS 45 / ZS 56, 310.52.590F 21 XL 120 mm

BEARING DIMENSIONS:
HEADSET DIMENSIONS
HEADTUBE LENGTH

UPPER: 41 X 6,5 MM - 36° / 45°

LOWER: 52 X 7 MM - 45° / 45°

SEAT POST DIAMETER 31,6 MM

SEAT CLAMP DIAMETER 34,9 MM

BREAKMOUNT REAR POSTMOUNT Ø 180 MM

REAR BRAKE MAX. 203 MM

BOTTOM BRACKET STANDARD BSA 73 MM ANGLE CUP

DROPOUT X12/BOOST 148 MM

ANGULAR CONTACT
BEARING
CHAINGUARD ISCG 05
BASE PLATE
LENGTH: 230 MM X 65 MM
SHOCK DIMENSION
HARDWARE: BODY: 8X20 MM, SHAFT: 8X20 MM

MAX. LOAD CAPACITY 115 KG

SLACK HEAD ANGLE STEEP HEAD ANGLE INSERT ANGLE CUP /

GO TO SERVICE & SUPPORT
ADJUST STEERING ANGLE
Apply a thin layer of grease to the insides of the bearing cups
HINWEIS: Sämtliche Informationen, die in diesem Dokument enthalten sind, sind STRENG VERTRAU- and the contactpoints of the frame. Insert the bearings with
LICH. Jeder Empfänger dieses Dokuments darf die darin enthaltenen Informationen, direkt oder indirekt, the phase facing the cup. Then put the bearing cups together
nur mit ausschliesslicher, schriftlicher Zustimmung der Firma MBCAD an Dritte weitergeben oder offenle- with the bearings in the frame. Important: The markings
gen. Die Firma MBCAD behält sich alle Rechte in Bezug auf Urheberrechtsgesetz, Patent- und Gebrauchs- on the bearing cups must point in the same direction.
musterschutz vor. Lizenzrechte werden hierdurch nicht erteilt.

NOTE: The information or material contained in this document is STRICTLY CONFIDENTIAL and any reci-
pient of this document shall not disclose or divulge, directly or indirectly, this document or the information or
material contained herein without the written consent of the company MBCAD. All copyrights, trademarks,
patents and other rights in connection herewith are expressly reserved to the company MBCAD and no
license is created hereby.