COSTING

KH-017
BC-1 WITH CRANE
Project M/S SUMANGALAM, KALAAKAL BLDG-1
BUILDING-1
17-Sep-2024 AREA 4841.00
Sr.No. Description of items Unit Rev.00 RATE AMOUNT(RS) KG/SQM Sr.No. Description of items Rev.00 RATE AMOUNT
KGS

1 BUILT-Ups : 5 SHEETING
MAIN FRAME KGS 55000 ROOFING sq.m 3900 1 275 1072500
crane beam KGS 37500 WALL CLADDING sq.m 240 1 275 66000
çrane bracket - stiffeners KGS 3000 Canopies sq.m 941 1 275 258775
roof monitor KGS 4000 roof monitor sq.m 642 1 275 176550
louvers KGS 7500 louvers sq.m 1144 1 275 314600
CANOPIES KGS 9200 TRIMS sq.m 500 1 320 160000
cage ladders 1 no. KGS 1000 EAVE GUTTER RMT 214 1 320 68480
TOTAL KGS 117200 70 8204000 24.2 VALLEY GUTTER RMT 0 0 320 0 KG/SQM

2 hot rolled ISMC FORMED : DOWN PIPES RMT 300 1 320 96000 0.0
Purlin & Girts KGS 62000 sky lights sq.m 0 0 100 0
RAKE ANGLE KGS 0 TURBOVENT NOS 0 0 100 0
LOUVERS KGS 28000 TOTAL SHEETING KGS 8 2212905
Secondaries for canopies KGS 19000
Secondaries for roof monitor KGS 22000
Secondaries for louvers KGS 0
TOTAL KGS 131000 66 8646000 27.1
BUILDING DESCRIPTION
3 HARD WARE :
Anchor Bolts(AB) KGS 1400 0 0
HARD WARE : KGS 2000 0 0 FT M
TOTAL KGS 3400.0 150.0 0.0 LENGTH = 349.7 106.575 O/O
4 Misc.steel WIDTH = 120.0 36.576 O/O
Anchor bolt templates KGS 300 HEIGHT = 29.5 9.000 CLR
Sag Rods + F.B. KGS 14500
ROD Bracing KGS 2500 BAY SPACING = 14 EQ spacings @ 7.62m
Pipe Bracings KGS 10200 ENDWALL SPACING = 6 @ 6.096m.
STAIRCASE -n/a KGS 0 Full ht Block wall on west side wall and 2 end walls and east side wall is
TOTAL KGS 27500 67 1842500 5.7 open for access upto 6m canopy clr ht
STEEL TOTAL KGS 279100 18692500 57.7 internal wind pressure ±0.7 is considered

Primary frame material - 345 Mpa

Secondary - 345 Mpa
GRAND TOTAL KGS 279108 20905405 57.7
Bracing, sag rods, pipe bracing - 250 Mpa
Design 279108 2 558216 Anchor bolts - 250 Mpa
Erection 279108 8 2093310 Roof Slope 1 in 8
Transport 279108 2 558216 Asbestos weight per sq.m assumed as 0.15 kn/sq.m

Total 24115147 86.401 Per kg FIXED base is considered for external columns along side walls and remaining all columns
WIND SPEED = 44 m/s, as per IS-875-part -3, 2015 version Quoted 27352584 98 Per kg Rod bracing is considered for roof and pipe bracing for walls
524.9157316373 525 Per sft
ZONE = II 5m wide canopy is considered in 1 side wall and 2 end walls + 2 bays @ 1 side wall along west side
Seismic code - 1893 part-1, version 2016 (latest) 1.5m x 1.5m louvers (approx) are considered as per sketch in 2 levels no wall sheeting, only triangular porti
DEFLECTION - H/100 for Crane supporting frames roof monitor of size 2m x 2m is considered
VERTICAL = S/180 for DL + LL, S/240 FOR MEZZ DL + MEZZ LL
= S/150 for DL + WL IN cell K-5, canopy area was included
MINIMUM THICKNESS - B/U = 5.0MM AND C/F = 2.0MM
Design will be by using staad software with 2 - Dimension approach.
Same as all the projects which are done so far
DESIGN CODE - MBMA-96, AISC-89, IS-801
Electromech Crane Data is considered as stated below -
DL =0.15 KN/M2 + 0.15 kn/sq for hot rolled ISMC purlins/girts , AND LL = 0.57 KN/M2
Capacity - 5.0 MT with 2 wheels on either ends of Girder - totally 4 wheels only
5.0MT
Max Static wheel load -42.7kn
Self weight of crane - 6.62 mt
hoist weight - 1.0 mt
Wheel Base - 3.5m
Buffer Distance - 4.1m
Crane head Room Distance - 1.106M