Presentation SmartEcoWater 2024 New

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

The Bulgarian company Smart Eco Water is a manufacturer of modular compact

desalination equipment.

Informational letter
Dear all,
We are honored to present to you our brand new, revolutionary device “Module” -
desalination equipment for obtaining clean water from marine and brackish water.

Desalination module with a productivity of 500 m3/day (2552 x 1096 x 1425)

This one of a kind super-compact desalination module combines solutions to all


desalination in a single device:
- Economical production of clean drinking water,
- Unique corrosion resistance of materials in sea water (up to 15 years!),
- Almost complete absence of pipe connections
- Fundamentally new axial-plunger pump combined with a waste heat exchanger,
which allows to significantly increase productivity and permeate withdrawal
Desalination module with a productivity of 10, 30, 40…240, …120,…500, 1000 m3/day

The cost of obtaining drinking water (with pre-treatment) that meets all the requirements
of World Health Organization (WHO), EU, USERA and Sanitary Regulations and Norms
(SRN) is no more than 0.4 $/m3, which is significantly lower than that of the best
examples of such equipment around the world to date.

For 1 cubic meter of purified water, the device consumes an average of about 2.6 kilowatts of
electricity, and can be equipped with solar panels or a wind generator.

This prime cost makes it possible to use desalinated water not only for drinking purposes,
but also for irrigation of farmland, extinguishing fires, as well as cooling reactors,
turbines, etc.
The desalination plant includes:

1. Base-distribution unit OR2 with electronic control system;


2. Desalination unit, consisting of:
- Desalination unit;
- Hydraulic drive, which combines the functions of a high pressure pump, a waste heat
exchanger and a booster pump patented by our company.
3. To ensure the safety of the main components of the equipment and uninterrupted
operation, a pre-treatment system is installed before the water is fed to the desalination
plant. (Pre-treatment system is set up with taking into account the specifications of the
source water’s chemical analysis)

The price of the "Module" is significantly lower than that of similar devices found around
the world.
Delivery of the product also includes warranty policy and maintenance services.

Desalination module with a productivity of 30…,60 m3/day


One of the main unique features of the “Module” is that an automatic desalination plant
of any productivity can be assembled by simply combining modules of the same
productivity with each other like “Lego” pieces. The portable plant can be assembled in
as little as 15 minutes and, thanks to its extremely small dimensions, can be installed
anywhere.

Desalination module with a productivity of 30, …240 m3/day (1923 x 340 x 850)

Currently, "Modules" of various productivity successfully desalinate brackish and sea


water in a number of countries, including: Italy, Egypt, Iran, Malaysia, Greece, Vietnam,
Australia, South Africa, Tanzania, UAE, Sri Lanka, Turkey, France, Japan, England,
Morocco, India, Indonesia and others.
Orders already placed from Cameroon, Chile, Peru, Cuba, Morocco, Uzbekistan etc.

In the world, the desalination Module is installed on modern ships and yachts.
SmartEcoWater
Our plants are successfully operating in restaurant and hotel complexes on the islands of
Sardinia and Elba in Italy. The use of desalination modules there turned out to be so
profitable that it made it possible for enterprises to almost completely abandon the
purchase of fresh water.

Desalination module with a productivity of 240 m3/day (1705 х 340 х 2552)

Desalination module with a productivity


of 30 m3/day (portable version for a car
trailer)
The product is aimed at the following consumer groups:
individuals,
municipalities,
cottage settlements,
golf courses,
hotel complexes,
farms and processors of agricultural products;
provision of sea vessels with drinking water, both in port and at sea
provision of clean drinking water on oil platforms, remote mining sites that do not have
high-quality drinking water
preparation of water (including sea water) for cooling heat-generating equipment

Installing 5 - 20 desalination plants is more profitable than the construction of one


factory, because:
- There is no need to upgrade or build a complex plumbing system to transport water.
- That leads to saving on the cost of additional equipment, material and services.
- Local desalination complexes are much more compact and environmentally friendly
than a large plant. Building one huge plant requires a construction site of the same scale.
- The purpose of a large plant is no different than that of ten similar small ones, but the
costs in the first case are much higher.
- The possibility of a gradual implementation of the project. Which makes it easier to
attract investors, and prioritize solving problems in the areas with the least fresh water
supply.

With the existing production capacities, our company is ready and capable to fully ensure
the manufacture and installation of equipment for brackish and sea water desalination
“Modules” for each well that deviates from the standards.
СЕ
DECLARATION OF CONFORMITY
Smart Есо Water LTD
Burgas с., р.с.8000, Meden Rudnik, 396 Ы, 2 gate, З fl.,
16 of. - Bulgaria
Phone :+359877742343
Web : www.smartecowater.com
E-mail : [email protected]

The product meets the technical requirement of the under standards and hence fulfils the
technical requirements of the following directives.

Product Name................: Desalination module

Model...........................: DB8SW1ООМ.00.00.00.000

Directive(s)....................: 2014/35/EU Low Voltage Directive,


2014/30/EU Electromagnetic CompatiЬility Directive
2006/42/ЕС Machinery Directive

Standard(s) ...................... : EN IEC 61000-6-1:2019, EN IEC 61000-6-3 :2021, EN 60204-


1:2018, EN ISO 12100:2010

Name Surname................. oman Tolstopiatov


Date of lssue............ 05.10.2023
Signature ...... ..· ·;',,Y,crP6'•z.
AТТESTATION OF CONFORMIТY
Name and Address of Attestation Holder: Document Number
Smart Есо Water LTD SE-1199-01-061023
Burgas с., р.с.8000, Meden Rudnik, 396 Ы, 2 gate, 3 fl.,
16 of. - Bulgaria Date of lssue:
06.10.2023
Name and Address of Manufacturer:
Smart Есо Water LTD Expiration Date:
Burgas с., р.с.8000, Meden Rudnik, 396 Ы, 2 gate, 3 fl., 06.10.2024
16 of. - Bulgaria
Test Report Number:
Brand: ЕМС-1199-01
LVD-1199-01
fu SmartEcoWater LVD-1199-02

Product Name: Test Required:


Desalination module EN IEC 61000-6-1:2019
EN IEC 61000-6-3 :2021
Product Model: EN 60204-1:2018
EN ISO 12100:2010
SeeAnnex 1

The product meets the technical requirement of the above standards as mentioned in the reference test
reports and hence fulfils the technical requirements of the following directives

2014/35/EU Low Voltage Directive


2014/30/EU Electromagnetic Compatibllity Directive
2006/42/ЕС Machinery Directive
CGS Test confirms type which is mentioned above according to the JAnnex 1] Essential Health and Safety Regulations of 2006/42/ЕС
Machinery Directive with inspection report. Manufacturer must ensure that assessment of conformity with internal checks on the
manufacture of above product according to the Annex VIII of 2006/42/ЕС.
This document is only valid for the equipment and configuration descriЬed, in conjunction with the test data detailed above reference
test reports. Document was issued on voluntary basis and does not imply meeting Notified Body conformity assessment procedure
for the prodLICt.
Тhе СЕ Mark, under the responsibility of the manufacturer or the importer, after completion of an ЕС Declaration of Conformity and
compliance with all relevant ЕС Directives.
SIGNATURE

CGS TEST HiZMETLERi TEKNiK KONTROL VE BELGELENDiRME ANONiM $iRKETi


Ferhatpa a Mahallesi 23. Sk. No:17/1 Ata ehir istanЬul/TURKiYE
www.cgstestmerkezi.com
Page: 1/2
Contact information:
Manufacturer company, Smart Eco Water Ltd, Bulgaria, Burgas
Roman Tolstopiatov BOTIM tel: +359 87 774 2343
E-mail: [email protected]
Manufacturer's representative in South America
Fares Kerbaj tel. +1 368 399 4658

You might also like