Scribd
Upload
86 views2 pages

A1 - Spec - EN - 1 Bambulab

Uploaded by

divama

Bambulab especif ingles

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

A1 - Spec - EN - 1 Bambulab

Uploaded by

divama
86 views2 pages
Bambulab especif ingles

Original Title

A1_Spec_EN_1 Bambulab

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

Bambulab especif ingles

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
86 views2 pages

A1 - Spec - EN - 1 Bambulab

Uploaded by

divama
Bambulab especif ingles

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

Bambu Lab A1

Technical Specification

Body

Build Volume: 256*256*256 mm³


Chassis: Steel + Extruded Aluminum

ToolHead

Hot End: All-Metal


Extruder Gears: Hardened Steel
Nozzle: Stainless Steel
Max Hot End Temperature: 300 ℃
Nozzle Diameter (Included): 0.4 mm
Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm

Heatbed

Compatible Build Plate: Bambu Textured PEI Plate

Bambu Smooth PEI Plate

Bambu Cool Plate


Max Build Plate Temperature: 100 ℃

Speed

Max Speed of Toolhead: 500 mm/s


Max Acceleration of Toolhead: 10000mm/s²
Max Hot End Flow: 28 mm³/s @ABS (Model: 150*150 mm single wall;

Material: Bambu ABS; Temperature: 280 ℃)

Cooling

Part Cooling Fan: Closed Loop Control


Hot End Fan: Closed Loop Control

Supported Filament

PLA, PETG, TPU, PVA: Ideal


ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended
Sensors

Monitoring Camera: Low Rate Camera (up to1080P) Timelapse Supported

Filament Run Out Sensor: Yes

Filament Odometry: Yes

Power Loss Recover: Yes

Filament Tangle Sensor: Yes

Physical Dimensions

Dimensions: 385*410*430mm³

Net Weight : 8.3 kg

Electrical Parameters

Input Voltage: 100-240 VAC, 50/60 Hz

Max Power: 1300W@220V， 350W@110V

Electronics

Display: 3.5 inches 320*240 IPS Touch Screen

Connectivity: Wi-Fi, Bambu-Bus

Storage: Micro SD Card

Control Interface: Touch Screen, APP, PC Application

Motion Controller: Dual-Core Cortex M4

Software

Slicer: Bambu Studio Support third party slicers which export standard
Gcode such as Superslicer, Prusaslicer and Cura, but certain

advanced features may not be supported.

Slicer Supported OS: MacOS, Windows

Wi-Fi

Frequency Range: 2412 MHz - 2472 MHz (CE)

2412 MHz - 2462 MHz (FCC)

2400 MHz - 2483.5 MHz (SRRC)

Transmitter Power (EIRP): ≤ 21.5 dBm (FCC)

≤ 20 dBm (CE/SRRC)

Protocol: IEEE 802.11 b/g/n

You might also like