3W High Power LED

Features
● Highest flux per LED family in the world
● Very long operating life (up to 100k hours)
● Available in Red, Yellow, Green, Blue, White
● Lambertian radiation pattern
● More energy efficient than incandescent and most halogen lamps
● Low voltage DC operated
● Cool beam, safe to the touch
● Fully dimmable
● No UV
● Superior ESD protection
● lower Rth 3W Blue LED
● RoHS compliant — Lead-free
● Instant light (less than 100ns )

Applications
● Portable (flashlight, bicycle)
● Reading lights (car, bus, aircraft)
● Orientation
● Mini-accent
● Decorative
● Fiber optic alternative
● Appliance
● Sign and channel letter
● Architectural detail
● Cove lighting
● Automotive exterior (Stop-Tail-Turn,CHMSL,Mirror side repeat) 3W White LED & Aluminum PCB
● Edge lit signs (Exit, point of sale)

Catalog
1. Red 3W High Power LED ...........................................................................................................................................2
2. Yellow 3W High Power LED.......................................................................................................................................4
3. Green 3W High Power LED .......................................................................................................................................7
4. Blue 3W High Power LED ..........................................................................................................................................9
5. White 3W High Power LED ......................................................................................................................................12
 3W High Power LED
1. Red 3W High Power LED

Chip
PART NO Lens Color
Material Emitted Color
LED-P3-D-Red GaAllnP Red ■ WATER CLEAR

Absolute Maximum Ratings (Ta = 25℃)

Items Symbol Absolute Maximum Rating Unit
Forward Current IF 0.7 A
Peak Forward Current* IFP 0.8 A
Reverse Voltage VR 5 V
Power Dissipation PD 3 W
Electrostatic discharge ESD ±2000 V
Operation Temperature TOPR -40~+80 ℃
Storage Temperature TSTG -40~+100 ℃
Lead Soldering Temperature* TSOL Max. 260℃ for 3sec Max.
*IFP Conditions：Pulse Width≤10msec duty≤1/10
* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation
is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we
recommend the working time is not over 5 -10 seconds without any heat dissipation equipment.
*Reflow, wave peak and soak stannum soldering etc. is not suitable for this products.
*Suggest to solder it by professional high power LED soldering machine.
*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.

Typical Electrical & Optical Characteristics ( Ta = 25℃)

Items Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=0.7A 2.0 2.8 V
Reverse Current IR VR=5V 50 uA
50% Power Angle 2θ1/2 IF=0.7A 110 140 deg
Luminous Intensity φV IF=0.7A 50 80 lm
Recommend Forward Current IF 0.7 A
Wave Length λd IF=0.7A 620 630 nm
Notes:1.Tolerance of measurement of forward voltage ±0.1V.
2.Tolerance of measurement of peak Wavelength ±2.0nm.
3.Tolerance of measurement of luminous intensity ±15%.

-2-
 3W High Power LED
Typical Electrical/Optical Characteristics Curves (Ta=25° Unless Otherwise Noted)

-3-
 3W High Power LED
Radiation Pattern

2. Yellow 3W High Power LED

Chip
PART NO Lens Color
Material Emitted Color
LED-P3-D-Yellow GaAllnP Yellow ■ WATER CLEAR

Absolute Maximum Ratings (Ta = 25℃)

Items Symbol Absolute Maximum Rating Unit
Forward Current IF 0.7 A
Peak Forward Current* IFP 0.8 A
Reverse Voltage VR 5 V
Power Dissipation PD 3 W
Electrostatic discharge ESD ±2000 V
Operation Temperature TOPR -40~+80 ℃
Storage Temperature TSTG -40~+100 ℃
Lead Soldering Temperature* TSOL Max. 260℃ for 3sec Max.
*IFP Conditions：Pulse Width≤10msec duty≤1/10
* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation
is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we
recommend the working time is not over 5 -10 seconds without any heat dissipation equipment.
*Reflow, wave peak and soak stannum soldering etc. is not suitable for this products.
*Suggest to solder it by professional high power LED soldering machine.
*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.

-4-
 3W High Power LED
Typical Electrical & Optical Characteristics ( Ta = 25℃)
Items Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=0.7A 2.0 2.8 V
Reverse Current IR VR=5V 50 uA
50% Power Angle 2θ1/2 IF=0.7A 110 140 deg
Luminous Intensity φV IF=0.7A 50 80 lm
Recommend Forward Current IF 0.7 A
Wave Length λd IF=0.7A 580 595 nm
Notes:1.Tolerance of measurement of forward voltage ±0.1V.
2.Tolerance of measurement of peak Wavelength ±2.0nm.
3.Tolerance of measurement of luminous intensity ±15%.

Typical Electrical/Optical Characteristics Curves (Ta=25° Unless Otherwise Noted)

-5-
 3W High Power LED

Radiation Pattern

-6-
 3W High Power LED
3. Green 3W High Power LED

Chip
PART NO Lens Color
Material Emitted Color
LED-P3-D-Green InGaN Green ■ WATER CLEAR

Absolute Maximum Ratings (Ta = 25℃)

Items Symbol Absolute Maximum Rating Unit
Forward Current IF 0.7 A
Peak Forward Current* IFP 0.8 A
Reverse Voltage VR 5 V
Power Dissipation PD 3 W
Electrostatic discharge ESD ±2000 V
Operation Temperature TOPR -40~+80 ℃
Storage Temperature TSTG -40~+100 ℃
Lead Soldering Temperature* TSOL Max. 260℃ for 3sec Max.
*IFP Conditions：Pulse Width≤10msec duty≤1/10
* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation
is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we
recommend the working time is not over 5 -10 seconds without any heat dissipation equipment.
*Reflow, wave peak and soak stannum soldering etc. is not suitable for this products.
*Suggest to solder it by professional high power LED soldering machine.
*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.

Typical Electrical & Optical Characteristics ( Ta = 25℃)

Items Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=0.7A 3.0 3.8 V
Reverse Current IR VR=5V 50 uA
50% Power Angle 2θ1/2 IF=0.7A 110 140 deg
Luminous Intensity φV IF=0.7A 90 110 lm
Recommend Forward Current IF 0.7 A
Wave Length λd IF=0.7A 520 530 nm
Notes:1.Tolerance of measurement of forward voltage ±0.1V.
2.Tolerance of measurement of peak Wavelength ±2.0nm.
3.Tolerance of measurement of luminous intensity ±15%.

-7-
 3W High Power LED
Typical Electrical/Optical Characteristics Curves (Ta=25° Unless Otherwise Noted)

-8-
 3W High Power LED
Radiation Pattern

4. Blue 3W High Power LED

Chip
PART NO Lens Color
Material Emitted Color
LED-P3-D-Blue InGan Blue ■ WATER CLEAR

Absolute Maximum Ratings (Ta = 25℃)

Items Symbol Absolute Maximum Rating Unit
Forward Current IF 0.7 A
Peak Forward Current* IFP 0.8 A
Reverse Voltage VR 5 V
Power Dissipation PD 3 W
Electrostatic discharge ESD ±2000 V
Operation Temperature TOPR -40~+80 ℃
Storage Temperature TSTG -40~+100 ℃
Lead Soldering Temperature* TSOL Max. 260℃ for 3sec Max.
*IFP Conditions：Pulse Width≤10msec duty≤1/10
* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation
is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we
recommend the working time is not over 5 -10 seconds without any heat dissipation equipment.
*Reflow, wave peak and soakstannum soldering etc. is not suitable for this products.
*Suggest to solder it by professional high power LED soldering machine.
*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.

-9-
 3W High Power LED
Typical Electrical & Optical Characteristics ( Ta = 25℃)
Items Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=0.7A 3.0 3.8 V
Reverse Current IR VR=5V 50 uA
50% Power Angle 2θ1/2 IF=0.7A 110 140 deg
Luminous Intensity φV IF=0.7A 20 50 lm
Recommend Forward Current IF 0.7 A
Wave Length λd IF=0.7A 460 470 nm
Notes:1.Tolerance of measurement of forward voltage ±0.1V.
2.Tolerance of measurement of peak Wavelength ±2.0nm.
3.Tolerance of measurement of luminous intensity ±15%.

Typical Electrical/Optical Characteristics Curves (Ta=25° Unless Otherwise Noted)

- 10 -
 3W High Power LED

Radiation Pattern

- 11 -
 3W High Power LED
5. White 3W High Power LED

Chip
PART NO Lens Color
Material Emitted Color
LED-P3-D-White InGaN White □ WATER CLEAR

Absolute Maximum Ratings (Ta = 25℃)

Items Symbol Absolute Maximum Rating Unit
Forward Current IF 0.7 A
Peak Forward Current* IFP 0.8 A
Reverse Voltage VR 5 V
Power Dissipation PD 3 W
Electrostatic discharge ESD ±4500 V
Operation Temperature TOPR -40~+80 ℃
Storage Temperature TSTG -40~+100 ℃
Lead Soldering Temperature* TSOL Max. 260℃ for 3sec Max.
*IFP Conditions：Pulse Width≤10msec duty≤1/10
* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation
is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we
recommend the working time is not over 5 -10 seconds without any heat dissipation equipment.
*Reflow, wave peak and soakstannum soldering etc. is not suitable for this products.
*Suggest to solder it by professional high power LED soldering machine.
*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.

Typical Electrical & Optical Characteristics ( Ta = 25℃)

Items Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=0.7A 3.2 4.0 V
Reverse Current IR VR=5V 50 uA
50% Power Angle 2θ1/2 IF=0.7A 110 140 deg
Luminous Intensity φV IF=0.7A 220 240 lm
Recommend Forward Current IF 0.7 A
Chromaticity Tc IF=0.7A 6000 6500 k
White Color Region --
Chromaticity Coordinates X=-- Y=--
Thermal Resistance,Junction to Case RJP IF=0.35A 10 ℃/W
Notes:1.Tolerance of measurement of forward voltage ±0.1V.
2.Tolerance of measurement of peak Wavelength ±2.0nm.
3.Tolerance of measurement of luminous intensity ±15%.

- 12 -
 3W High Power LED
Typical Electrical/Optical Characteristics Curves (Ta=25° Unless Otherwise Noted)

- 13 -
 3W High Power LED
Radiation Pattern

Package Dimensions (unit:mm)

Notes:
All dimensions in mm tolerance is ±0.2mm unless otherwise noted.

- 14 -