Scribd
Upload
53 views11 pages

03 - C264 Certificate Procedure

C264 BCU CERTIFICATE GENERATION PROCEDURE

Uploaded by

B Naveen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views11 pages

03 - C264 Certificate Procedure

C264 BCU CERTIFICATE GENERATION PROCEDURE

Uploaded by

B Naveen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

C264 (CPU4) Certificates preparation.

Select and open the DS Agile package as follow,

C:\Downloads\dsagile-v7.6.0.0-base

Click and open adscripts-3.0.01 folder as follow

dsagile-v7.6.0.0-base\adscripts-3.0.0.1 and open DSA_Cert folder as follow


dsagile-v7.6.0.0-base\adscripts-3.0.0.1\DSA_Cert open Generation folder

Open configuration_templates folder

For certificate generation, first shall be prepared .cnf file for EWS and CA (Engineering work station and
Certificate Authorities).

a) Select copy of both CA_DS Agile_Template.cnf and EWS_DSAgile_Template.cnf files and


should be pasted in configuration_files.
b) The configuration_file folder will be empty before preparation of .cnf files.
c) Next both .cnf file name should be changed as EWS_DSAgile.cnf instead of
EWS_DSAgile_Template.cnf.

a) Click open .cnf file by notepad and replace CN text by “CN = EWS.dsagile2016.intern”
instead CN = <EWSCommonName>” and give IP-1 & 2 address (172.16.40.220 for EWS1 and
221 for EWS2) of EWS PC’s. IP-2 can be configured if additional EWS-2 available.
b) Save and close.
a) Click open .cnf file by notepad and replace CN text by “CN = CA_DsAgile” instead CN =
<CACommonName>”
b) Save and Close

As earlier step, .cnf file preparation have done only for EWS and CA. To next, need .cnf file for database
equipment also, e.g. BCU and server.

a) dsagile-v7.6.0.0-base\adscripts-3.0.0.1\DSA_Cert open Generation folder.


b) Select and open Prepare_cnf_file_1.0.0.17.exe application as follow,

c) Browse the DB zip file from respective path and import the same.
d) Enter and press ok.
e) .cnf file will be generated automatically and available in below location.

Certification preparation of all equipment as follow,

Click and open the DS_Agile_7.0.5_certgen.bat batch file then all certificates will be generated
automatically.

a) To find generated certificate for EWS PC’s in below location,


b) To find generated certificate for BCU-C264 in below location,

Certificate preparation completed.

a) Following certificates to be downloaded to BCU ‘s after boot installation of C264.

Note : After boot installation, certificate should be downloaded before restart BCU.

The below procedure to be followed for certificate downloading to EWS PC.

Snap-1
Snap-2: Go to file and Select Add/Remove snap.in

Snap-3: Select certificate and add

Snap-4: -Change to computer account


Step-5: Select Personal All tasks Import

Step-6: Select browse certificate from respective path.

Step-7: Select EWS_DSAgile.pfx file and open.


Step-8 : proceed up to import was successful appears.

Step-9 : Then select copy of CA_DsAgile file only from below path.

Step-10 : Next same certificate to be pasted in Trusted Root certificate Authorities Certificate folder.
Step-11:- Finally save and Close.

Thanks….End

Prepared by Praveen Prabhu

You might also like