Subjects

Kenya Anin Girls High Subjects Computer Studies Form 1 Introduction to computers

Introduction to computers
Definition of terms

Computer : is an electronic device that operates (works) under the control of programs stored in its own memory
unit.
A computer is an electronic machine that processes raw data to give information as output.

An electronic device that accepts data as input, and transforms it under the influence of a set of special instructions
called Programs, to produce the desired output (referred to as Information).

Explanations;
A computer is described as an electronic device because; it is made up of electronic components and uses electric
energy (such as electricity) to operate.

A computer has an internal memory, which stores data & instructions temporarily awaiting processing, and even
holds the intermediate result (information) before it is communicated to the recipients through the Output devices.

It works on the data using the instructions issued, means that, the computer cannot do any useful job on its own. It
can only work as per the set of instructions issued.

A computer will accept data in one form and produce it in another form. The data is normally held within the
computer as it is being processed.

Program:
A computer Program is a set of related instructions written in the language of the computer & is used to make the
computer perform a specific task (or, to direct the computer on what to do).

A set of related instructions which specify how the data is to be processed.

A set of instructions used to guide a computer through a process.

Data: Is a collection of raw facts, figures or instructions that do not have much meaning to the user.

­Data may be in form of numbers, alphabets/letters or symbols, and can be processed to produce information.

TYPES OF DATA.
There are two types/forms of data:

a). Digital (discrete) data:

Digital data is discrete in nature. It must be represented in form of numbers, alphabets or symbols for it to be
processed by a computer. Digital data is obtained by counting. E.g. 1, 2, 3 …

b). Analogue (continuous) data:

Analogue data is continuous in nature. It must be represented in physical nature in order to be processed by the
computer. ­Analogue data is obtained by measurement. E.g. Pressure, Temperature, Humidity, Lengths or currents,
etc.­The output is in form of smooth graphs from which the data can be read.
Data Processing:
It is the process of collecting all items of data together & converting them into information.

Processing refers to the way the data is manipulated (or handled) to turn it into information.
The processing may involve calculation, comparison or any other logic to produce the required result. The
processing of the data usually results in some meaningful information being produced.

Information: is the data which has been refined, summarized & manipulated in the way you want it, or into a more
meaningful form for decision-making. ­The information must be accurate, timely, complete and relevant.

Characteristics / Features of a Computer.

Before 20th century, most information was processed manually or by use of simple machines. Today, millions of
people are using computers in offices and at home to produce and store all types of information

The following are some of the attributes that make computers widely accepted & used in the day-to-day activities in
our society:

1. Speed.
Computers operate at very high speeds, and can perform very many functions within a very short time.
They can perform a much complicated task much faster than a human being.
The speed of a computer is measured in Fractions of seconds.
Millisecond - a thousandth of a second (10-3)
Microsecond - a millionth of a second (10-6)
Nanosecond - a thousand millionth of a second (10-9)
Picosecond - a million millionth of a second (10-12)

The speed of a computer is usually linked to the technology used to build it.

a). 1st Generation computers (1940s & early 1950s).

• The computers were built using Vacuum tubes, and the speed was measured in Milliseconds. E.g., a computer
could perform 5,000 additions & 300 multiplications per second.
 Image result for vacuum tube

b). 2nd Generation computers (1950s & early 1960s).

Were built using Transistors. Their operation speeds increased & were measured in Microseconds. E.g., a computer
could perform 1 million additions per second.
Related image

c). Mid 1960s.

Integrated Circuit (IC), which combined a no. of transistors & diodes together on a silicon chip, was developed. The
speed increased to tens of millions of operations per second.

d). In 1971, Intel Corporation produced a very small, single chip called a Microprocessor, which could perform all the
operations on the computer’s processor. The chip contained about 1,600 transistors.

e). Today’s microprocessors are very powerful, cheaper & more reliable due to the use of the Large Scale Integration
(LSI) & Very Large scale Integration (VLSI) technologies, which combines hundreds of thousands of components onto
a single chip.
The computer speeds are now measured in Nanoseconds & Picoseconds.

2. Accuracy:
Unlike human beings, computers are very accurate, i.e., they never make mistakes.
A computer can work for very long periods without going wrong. However, when an error occurs the computer has a
number of in-built, self-checking features in their electronic components that can detect & correct such errors.
Usually errors are committed by the users entering the data to the computer, thus the saying Garbage in Garbage
Out (GIGO).
This means that, if you enter incorrect data into the computer and have it processed, the computer will give you
misleading information.

3. Reliability.
The computer can be relied upon to produce the correct answer if it is given the correct instructions & supplied with
the correct data.

Therefore, if you want to add two numbers, but by mistake, give the computer a “Multiply” instruction, the computer
will not know that you intended to “ADD”; it will multiply the numbers supplied.

Similarly, if you give it the ADD instruction, but make a mistake and enter an incorrect data; let say, 14 & 83 instead
of 14 & 38; then the computer will produce the “wrong” answer 97 instead of 52. However, note that, 97 is ‘correct’
based on the data supplied.

Therefore, the output produced by a computer is only as reliable as the instructions used & the data supplied.

4. Consistency:
Computers are usually consistent. This means that, given the same data & the same instructions, they will produce
the same answer every time that particular process is repeated.

5. Storage:

­A computer is capable of storing large amounts of data or instructions in a very small space.

­A computer can store data & instructions for later use, and it can produce/ retrieve this data when required so that
the user can make use of it.

­Data stored in a computer can be protected from unauthorized individuals through the use of passwords.

6. Diligence:

Unlike human beings, a computer can work continuously without getting tired or bored. Even if it has to do a million
calculations, it will do the last one with the same speed and accuracy as the first one.

7. Automation:

A computer is an automatic device. This is because, once given the instructions, it is guided by these instructions and
can carry on its job automatically until it is complete.

It can also perform a variety of jobs as long as there is a well-defined procedure.

8. Versatile:

A computer can be used in different places to perform a large number of different jobs depending on the
instructions fed to it.

9. Imposition of a formal approach to working methods:

Because a computer can only work with a strict set of instructions, it identifies and imposes rigid rules for dealing
with the data it is given to process.

CLASSIFICATION OF COMPUTERS
Computer exist in defferent sizes, weight and shapes
The major ways in which computers are classified are
i) Classification according to Functionality
In this category, computers are categorised ccording to the way they process data and kind of data a computer can
process.
Example of this data are,
a) Analog Data
b) Digital data

ii) Classification according to the purpose

iii) Classification according to physical size
iii) classification according to functionality

ACCORDING TO PHYSICAL SIZE

TYPES OF COMPUTER

Analog computer

Analog computer measures and answer the questions by the method of “HOW MUCH”. The input data is not a
number infect a physical quantity like temp, pressure, speed, velocity.

Signals are continuous of (0 to 10 V)

Accuracy 1% Approximately
High speed
Output is continuous

Time is wasted in transmission time

ANALOG COMPUTER

DIGITAL COMPUTERS

Digital computer counts and answer the questions by the method of “HOW Many”. The input data is represented by
a number. These are used for the logical and arithmetic operations.

Signals are two level of (0 V or 5 V)

Accuracy unlimited
low speed sequential as well as parallel processing
Output is continuous but obtain when computation is completed.

MICRO COMPUTERS

Micro computer are the smallest computer system. There size range from calculator to desktop size. Its CPU is
microprocessor. It also known as Grand child Computer.

Application : - personal computer, Multi user system, offices.

MINI COMPUTERS
These are also small general purpose system. They are generally more powerful and most useful as
compared to micro computer. Mini computer are also known as mid range computer or Child computer.

Application :- Departmental systems, Network Servers, work group system.

MAINFRAME COMPUTERS

Mainframe computers are those computers that offer faster processing and grater storage area. The word “main
frame” comes from the metal frames. It is also known as Father computer.

Application – Host computer, Central data base server.

SUPER COMPUTERS

Super computer are those computer which are designed for scientific job like whether forecasting and
artificial intelligence etc. They are fastest and expensive. A super computer contains a number of CPU
which operate in parallel to make it faster. It also known as grand father computer.
Application – whether forecasting, weapons research and development.

CLASSIFICATION OF DIGITAL COMPUTERS

Desktop
Workstation
Notebook
Tablet PC
Handheld computer
Smart Phone

WORKSTATION

TABLET PC

HANDHELD PC (PDA)

SMART PHONE