Scribd
Upload
28 views1 page

AOI Operator Assessment

AOI Operator Assessment

Uploaded by

gk4462gmailcom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
28 views1 page

AOI Operator Assessment

AOI Operator Assessment

Uploaded by

gk4462gmailcom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Check points Weighted Measurement Method Score Weighte Corrective Actions Plan

Value d
Score
AOI Operators
(V510 & VVTS)
1.01 Should have been 10 Understand machine basics 1 10 INETest or customer engineer
trained and certified and operation will provide operation training to
flow/procedure. Request operator if needed.
operator power up the
machine from main off
position
1.02 Understand safety 20 Ask operator about all the 1 20 Safety rules training
considerations & system warning/caution label.
precautions Have to make sure operators
understand all safety rules.
1.03 Correctly use the 10 Able to correctly scan the 1 10 If there's problem in scanning the
barcode scanner at barcode of boards. barcode, try with few more
VVTS boards to confirm the barcode
clarity. Is problems persists, they
may be due to scanner issues,
cabling, software etc. Contact
technician/engineer for trouble-
shooting.

1.04 Correctly select 10 Select the correct program 1 10 Basic operation training
program for the board to be tested.
Observe this especially
during program conversion
1.05 Operators 20 Watch the repair station 1 20 Image Interpretation Training.
Understand of AOI operators, ensure that they
Images correctly review each defect call and
mark them correctly with
defect type and repair
actions.
1.06 Operators have 20 Check VVTS logins, only 1 20 VVTS user guide training.
Individual Logins for people who have been
Performance trained and passed
Measurement certification have logins.
Observe if operator are using
their own logins and log-outs
when they leave the repair
station

1.07 Enter the data 20 Operator should know how to 0 0 VVTS user guide training.
correctly into VVTS change the "status" of a
component defect. Monitor
the operator for 1 hour or 20
boards to evaluate the
performance.
1.08 Repair actions 15 Indicate defects component 0 0 VVTS user guide training.
should be with arrow sticker
communicated
correctly to the
repairer if not
repairing at the
VVTS station.

You might also like