1.

Which of the following usually stores all user-related data that is also relevant to GSM
mobile systems?

a. VLR

b. HMR

c. CMR

d. SIM

2. Which channel indicates the number of symbols used by the PDCCH?

a) PHICH b) PDCCH

c) PBCH d) PCFICH

3. The hexagon shape is used for radio coverage because

a) It uses the maximum area for coverage

b) Fewer number of cells are required

c) It approximates a circular radiation pattern

d) All of the above

4. In which one of the following codes with specific characteristics can be applied to the
transmission?

a) CDMA
b) GPRS
c) GSM
d) All of the above

5. Which of the following is not a characteristic of 3G network?

a) Communication over VoIP

b) Unparalleled network capacity

c) Multi-megabit Internet access

d) LTE based network

6.Which of the following offers packet mode data transfer service over the cellular network?

a) TCP
b) GPRS
c) GSM
d) None of the above

7.A set that makes stationary or mobile wireless station and also have optional central base
station is known as ___________

a) Basic service set

b) Extended service set

c) Network point set

d) Access point

8. Which one of the following enables us to use the entire bandwidth simultaneously?

a) TDMA
b) CDMA
c) FDMA
d) All of the above

9. The term _________ refers to transporting a mobile station from one base station to
another base station.

a) Roamer

b) Forward channel

c) Handoff or hand over

d) MIN

10.5G was developed by______

a) IBM b) 3GPP's c) TRAI d) Google

11. In a Cellular network, which of the following is used to use the same frequency for
others?

a) Frequency hopping
b) Frequency reuse
c) Frequency planning
d) None of the above
12.5G is the fifth generation technology standard for________

a) Laptops b)Televisions

c)Broadband cellular networks d)None of the Above

13.Mobile Computing allows transmission of data from one wireless-enabled device to

another_

a) Any device
b) Wired device
c) Wireless-enabled device
d) one of the above

14.Which technology is used in 5G for beamforming

a) MIMO b) SISO

c) MISO d) SIMO

15.What is the maximum speed of 5G for mobile users?

a) 100 Mbps b) 1 Gbps c) 10 Gbps d) 100 Gbps

16.Which one of the following is considered as the GSM supplementary service?

a) Emergency number
b) SMS
c) Call forwarding
d) All of the above

17.The G in 5G stands for?

a) Gigabit b)Gigahertz

b)Good to Go d)Generation

18.Expand MIMO

a) Main‐Input Multiple‐Output b) Multiple‐Input Main‐Output

c) Multiple‐Input Multiple‐Output d) Main‐Input Main‐Output

19.How many sub-systems are Global Systems for Mobiles?

3
2

None of the above

20. 5G was rolled out in which year?

a) 2019 b) 2020 c) 2021 d) 2022

21.User‐plane latency in LTE is

a) < 20ms b) > 20ms c) <10ms d) > 25ms

22. What is Mobile communication?

a) Allows to communicate from different locations without the use of physical medium
b) Allows to communicate from different locations with the use of physical medium
c) Allows to communicate from same locations without the use of physical medium
d) Allows to communicate from same locations with the use of physical medium

23.Which two network elements are connected by the SGs interface?

a) MME and MSC server b) UTRAN and MSC server

c) MME and SGSN d) SGW and MSC server

24.What is internet?

a) A network of interconnected local area networks

b) A collection of unrelated computers

c) Interconnection of wide area networks

d) A single network

24.What is the maximum speed of 5G internet?

A) 100 Mbps B) 1 Gbps C) 10 Gbps D) 100 Gbps

25. Which frequency range is used in 5G?

A) 600 MHz to 6 GHz B) 24 GHz to 100 GHz C) Both A and B D) None of the above

26. Which country was the first to launch 5G network?

A) USA B) South Korea C) China D) Japan

27. Which company is leading the development of 5G technology?

A) Apple B) Samsung C) Qualcomm D) Huawei

28. What does SDN stand for?

a. Software Defined Network
b. System Development Network
c. Server Data Notification
d. Secure Domain Network

29.Which entity within the Evolved Packet Core is responsible for IP address allocation?

a) SGW b) MME

c) eNB d) PDN-GW

30. Which term describes the process of creating multiple virtual networks on a physical
network infrastructure?
a. Software-Defined Networking
b. Network Controller
c. Network Virtualization
d. Multiplexing

31.Expand UMTS

a) Universal Mobile Telecommunication Server b) Union Mode Telecommunication Service

c) Universal Mobile Telecommunication System d) Uni Mobile Telecommunication System

32.What is the maximum speed of 5G?

a) 100 Mbps b) 1 Gbps c) 10 Gbps d) 100 Gbps

33.What is the definition of QoS?

a) The process by which network resources are controlled to implement a given policy for a
given user

b) A set of rules specifying the user plane services and functions available to a particular
user, supplied by the network

c) A value assigned to specific packets transmitted to/from a user that determines the relative
importance of transmitting those packets during the upcoming opportunity to use the medium

d) The measurable end-to-end performance properties of a network service, which can be

guaranteed in advance by a service-level agreement (SLA) between a user and a service
provider

34.TDM stands for:

a)Time Division Multiplexing

b)Transfer Multiplexing

c)Tedious Division Multiplexing

d)None of the above

35. What do CA-PA mappings refer to in networking?

a. Customer Authentication and Provider Authorization
b. Cloud Access and Private Access
c. Customer Address and Provider Address Mappings
d. Communication Access and Protocol Authorization

36.What type of handovers is supported by LTE?

a) Hard handover only b) Soft handover only

c) Hard and soft handover d) Hard, soft and softest handover

37.In 3GPP’s terminology, ‘SAE’ refers to which of the following?

a) EPC

b) RAN

c) SAE

d) d) IP-CAN

38. What does CA space refer to in network virtualization?

A. Space for network providers
B. Address space for individual customers or tenants
C. Reserved IP addresses for public access
D. Virtual IP space for web applications

39.What is the minimum amount of RF spectrum needed for an FDD LTE radio channel?

a) 1.4 MHz b) 2.8 MHz

c) 5 MHz d) 20 MHz

40.Which of the following are ways in which a subscriber can be identified in 5G?

a) Permanent Identity b) Concealed Identity

c) Temporary Identity d) Hidden Identity

41.Which RLC mode adds the least amount of delay to user traffic?
a) Unacknowledged mode (UM) b) Acknowledged mode (AM)

c) Low latency mode (LM) d) Transparent mode (TM)

42.Which technology is used in 5G for data transfer

a) OFDM b) QPSK

c) FM d) AM

43. Which of the following technology is mainly designed for indoor coverage?
a) Femtocell network
b) 3GPP
c) LTE
d) AMPS

44.Which organization is responsible for developing LTE standards?

a) UMTS b) 3GPP

c) 3GPP2 d) ISO

45.What is the main advantage of 5G technology over 4G?

a) Faster data transfer speed b) Lower latency c) Improved capacity d) All of the above

46 MAC stands for ________

a) Media Area Control
b) Memory Access Control
c) Memory Area Control
d) Media Access Control

47.What is the largest channel bandwidth a UE is required to support in LTE?

a) 10 MHz b) 20 MHz

c) 1.4 MHz d) 5 MHz

48.To accommodate faster data transmission speeds, 5G has greater bandwidth. What other
term is synonymous with bandwidth?

a) Speed b) Capacity

c) Strength d) Connection

49.Expand UTRAN

a) UMTS Terrestrial Radio Across Network b) UMAS Terrestrial Radio Access Network

c) UMSS Terrestrial Radio Across Network d) UMTS Terrestrial Radio Access Network
50. The physical layer is concerned with ___________
a) bit-by-bit delivery
b) process to process delivery
c) application to application delivery
d) port to port delivery