Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 2/19/2024
Design code AISC 360-16

Material
Steel A36
Concrete 3000 psi, 4000 psi

1/6
Project:
Project no:
Author:

Project item Angkur Atap Gudang GAS

Design
Name Angkur Atap Gudang GAS
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns

β– γ- α- Offset Offset Offset
Forces
Name Cross-section Direction Pitch Rotation ex ey ez
in
[°] [°] [°] [mm] [mm] [mm]
36 - CON1(H
H.200.200 0.0 -90.0 0.0 0 0 0 Node
194x150x6)

Cross-sections
Name Material
36 - CON1(H 194x150x6) A36

Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
20 A325M 20 A325M 20 830.0 314

2/6
Project:
Project no:
Author:

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 H.200.200 -35.4 0.4 8.1 0.0 0.0 0.0

Foundation block
Item Value Unit
CB 1
Dimensions 300 x 344 mm
Depth 1500 mm
Anchor 20 A325M
Anchoring length 400 mm
Shear force transfer Friction

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Anchors 0.0 < 100% OK
Welds 12.6 < 100% OK
Concrete block 3.2 < 100% OK
Shear 87.7 < 100% OK
Buckling Not calculated

Plates
Fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
H.200.200-bfl 1 248.2 9.0 LE1 17.6 0.0 0.0 OK
H.200.200-tfl 1 248.2 9.0 LE1 16.0 0.0 0.0 OK
H.200.200-w 1 248.2 6.0 LE1 19.3 0.0 0.0 OK
BP1 248.2 10.0 LE1 17.5 0.0 0.0 OK

Design data

fy εlim
Material
[MPa] [%]
A36 248.2 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

3/6
 Project:
Project no:
Author:

Overall check, LE1

Strain check, LE1

4/6
 Project:
Project no:
Author:

Equivalent stress, LE1

Anchors
Nf V ϕVcp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [%] [%] [%]
A1 LE1 0.0 0.0 81.2 0.0 0.0 0.0 OK

A2 LE1 0.0 0.0 81.2 0.0 0.0 0.0 OK

A3 LE1 0.0 0.0 81.2 0.0 0.0 0.0 OK

A4 LE1 0.0 0.0 81.2 0.0 0.0 0.0 OK

Design data
ϕNsa ϕVsa
Grade
[kN] [kN]
20 A325M - 1 142.3 79.3

Symbol explanation
Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕVcp Concrete pryout strength in shear – ACI 318-14 – 17.5.3
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

5/6
 Project:
Project no:
Author:

Welds
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
BP1 H.200.200-bfl 1 E60xx ◢3.5◣ ◢5.0◣ 150 17 LE1 1.8 14.4 12.6 OK
E60xx ◢3.5◣ ◢5.0◣ 150 17 LE1 1.6 14.5 11.2 OK
BP1 H.200.200-tfl 1 E60xx ◢3.5◣ ◢5.0◣ 150 17 LE1 1.6 14.6 11.0 OK
E60xx ◢3.5◣ ◢5.0◣ 150 17 LE1 1.5 14.4 10.7 OK
BP1 H.200.200-w 1 E60xx ◢3.5◣ ◢5.0◣ 184 17 LE1 0.9 14.5 6.0 OK
E60xx ◢3.5◣ ◢5.0◣ 184 17 LE1 0.9 14.6 6.1 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Concrete block
A1 A2 σ Ut
Item Loads Status
[mm2] [mm2] [MPa] [%]
CB 1 LE1 54675 99510 0.7 3.2 OK

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Shear in contact plane

V ϕVr μ Ut
Item Loads Status
[kN] [kN] [-] [%]
BP1 LE1 8.1 9.3 0.40 87.7 OK

Symbol explanation
V Shear force
ϕVr Shear resistance
μ Coefficient of friction between base plate and concrete block
Ut Utilization

Buckling
Buckling analysis was not calculated.

6/6