Scribd
Upload
45 views1 page

ReefLink Diagnostic LED Chart

Uujdjku

Uploaded by

Perman N2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views1 page

ReefLink Diagnostic LED Chart

Uujdjku

Uploaded by

Perman N2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ReefLink Diagnostic LED Chart

As shown above, the ReefLink has six (6) LEDs, each representing a distinct software module. Currently, each LED can be
Green, Yellow/Amber, Red or White.

LED Color Definitions


White
If all LEDs are White, the ReefLink is factory reset and ready for setup.

Blue
If all LEDs are Blue, the ReefLink is connected to the user’s network and EcoSmart Live.

Green
Green indicates a valid/successful condition. This applies to all LEDs.

Yellow
LED # Module Meaning Cause Remedy
1 OS Init N/A N/A N/A
2 Config Files N/A N/A N/A
3 RF Module N/A N/A N/A
4 Ethernet Valid, but not in use Using Wifi N/A
5 Wifi Valid, but not in use Using Ethernet N/A
6 ESL Connection Reconnecting Lost connection Wait up to 30 seconds to
reconnect. If still yellow, factory
reset and setup

Red
LED # Module Meaning Cause Remedy
1 OS Init OS Init Failure Multiple causes Soft reset. If that doesn’t work,
factory reset and setup
2 Config Files Invalid Config - Invalid config files Factory reset and setup
- Corrupt SD card
3 RF Module RF Module Failure - RF module is not present Soft reset first. If that doesn’t
- Faulty hardware work, open the ReefLink and
reset the RF module
4 Ethernet Hardware or Internet - Ethernet hardware failed to Soft reset and check the Internet
Failure initialize connection
- Not connected to the Internet
5 Wifi Hardware or Internet - Wifi hardware failed to Soft reset and check the internet
Failure initialize connection
- Not connected to the Internet
6 ESL Connection Not Connected - Lost connection Wait up to 30 seconds to
- Invalid login reconnect. If still red, factory
- ESL server is down or under reset and setup
maintenance

You might also like