Scribd
Upload
30 views2 pages

Putty Boost

Putty Boost

Uploaded by

nksapcolouracademy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views2 pages

Putty Boost

Putty Boost

Uploaded by

nksapcolouracademy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT CODE 6878

SmartCare Putty Boost


Putty Boost is a Poly carboxyl Ether (PCE) based integral solution for Putty. It is an additive to the powder
putty and enhances workability and performance of putty.
The same can be used with Waterproof putty. It increases crack resistance and strength of putty.

PRODUCT BENEFITS
Enhanced Workability Increased Strength
Putty becomes more workable and easier to apply Increased compressive strength of putty;
on the wall overall strong binding and less chalking

Easy to Mix & Apply Reduced Cracking & Shrinkage


Lesser lump formation in putty and better Reduces drying shrinkage of putty by 50%
stretchability which reduces incidence of hairline cracks
significantly on putty
Increased Pot-Life
Pot- life of putty increased by up to an hour as Increased Productivity
compared to normal putty mixture Due to increased POT life and stretchability,
work productivity increases

Clear*

per 40 kg
putty bag
Shelf life: 24 months from date of manufacture in
original tightly closed containers. Keep the container *Please note: SmartCare Putty Boost is an Integral
away from direct sunlight and excessive heat. waterproofing liquid

Clean the surface free from Dust, Oil and any other contamination by sanding. Followed by washing with water. Allow
surface to dry completely.

Surface cracks of 3 mm or less width should be cleaned with water and primed with a coat of Asian Paints Interior Wall
Primer. Fill Asian Paints Crack Seal with a putty knife in the primed crack so that there are no air voids left. Apply second
coat of Crack Seal and allow it to dry overnight.

Mix PuttyBoost as per recommended dosage into 25% water of total recommended water for Trucare Wall Putty.

Mix “Trucare Wall Putty” with mixture of PuttyBoost and water to make the putty wet then add remaining recommended
water over wet putty, under continuous stirring.
Add remaining water as per requirement to achieve desired consistency.

For better application – follow the Direction for use of “Trucare Wall Putty”.
• Form: Ready to use clear liquid. Shake well before use.
• Density: Approx. 1.050 +/- .05 g/cc Do not add Putty Boost directly into dry putty, always add along with water in putty.
• Application Temperature: Should be above
Store in a shed away from direct sunlight.
10 °C.
Keep out of the reach of children.

Kindly refer to the MSDS for Asian Paints SmartCare Putty Boost which gives detailed
information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
It is recommended to wear suitable nose pad during sanding and surface preparation to avoid
dust inhalation.
In the event of spills, contain spillage using sand or earth.
No added Lead, Mercury or Chromium compounds.
Non flammable.

Version No. VN 24/06/2021

Version No. VN 24/06/2021. Please note that this datasheet supersedes all previous versions. For Feedback/complaints, write to Customer Centricity
Manager at Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India or call 1800-209-5678 or email to [email protected]

You might also like