TCON Board

Mytec

Uploaded by

edianelrjr2370

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as DOCX, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

83 views2 pages

TCON Board

Mytec

Uploaded by

edianelrjr2370

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as DOCX, PDF, TXT or read online on Scribd

You are on page 1/ 2

What is the T-CON Board?

The T-CON board is the television’s timing control board. It is responsible for generating the video
signals that control the timing of the various components in the television. The T-CON board is also
responsible for generating the synchronization signals that ensure that all of the components in the
television are working together in harmony.

The T-CON board is typically located between the LCD panel and the mainboard. It is connected to the
LCD panel via a ribbon cable. The T-CON board is usually made up of several smaller sub-boards, each of
which is responsible for a different function.

The primary function of the T-CON board is to generate the video signal that controls the timing of the
liquid crystal display (LCD) panel. The video signal consists of two parts: The synchronization signals
(sync pulses) and the data signals. The sync pulses tell each pixel when to turn on and off, and the data
signals contain information about what color each pixel should be.

The T-CON board generates these sync pulses using a technique called phase locked loop (PLL). PLL is a
way of generating a square wave with very precise timing. By varying the frequency of the square wave,
we can change how fast or slow each pixel turns on and off. This gives us control over how long each
pixel is “on” for, and hence allows us to control what color it appears as.

How Does the T-CON Board Work?

When it comes to televisions, the T-CON board is responsible for the image displayed on the screen. This
board is also known as the timing control board or the logic board. It is a small circuit board that
connects to the LCD panel and controls the timing of the signal sent to the panel. Without a T-CON
board, an LCD television would not be able to display an image.

The T-CON board is responsible for generating the video signals that are sent to the LCD panel. These
signals tell the pixels when to turn on and off. The T-CON board also handles other important functions
such as frame rate conversion and image scaling.

Frame rate conversion is necessary because most TV programs are filmed at a different frame rate than
what is required for an LCD television. For example, movies are typically filmed at 24 frames per second
while TVs require a 60 Hz refresh rate. The T-CON board converts the signal so that it can be displayed
properly on an LCD television.
Image scaling is another important function of the T-CON board. This function ensures that images are
displayed correctly on different-sized screens. Most T-CON boards can scale images up or down by a
factor of two without losing any quality.

The T-CON board is a critical part of an LCD television but it is often overlooked. Without a functioning T-
CON board, an LCD television would not be able to display an image correctly.

How to Fix a T-CON Board Problem

There are a few things you can try if you think your T-CON board is causing problems with your TV’s
display.

1. Check all of the connections between the main board and the T-CON board. Make sure they’re secure
and free of any dirt or debris.

2. If you have a multimeter, you can check for continuity between the pins on the T-CON board. This will
tell you if there’s an issue with the connection between the boards.

3. You can also try replacing the T-CON board entirely. This is usually only necessary if there’s physical
damage to the board or if another component on the main board is causing problems with the signal.