Scribd
Upload
888 views

Optimization of The Computer and The System

Optimization of the computer and the system for using WinPC-NC Light and WinPC-Economy Following operating manual provides instructions concerning the optimization of an existing Windows XP system in order to get a faultless run of the realtime modules of WinPC-NC Light and Economy without any interferences by other processes.

Uploaded by

cncstep
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
888 views

Optimization of The Computer and The System

Optimization of the computer and the system for using WinPC-NC Light and WinPC-Economy Following operating manual provides instructions concerning the optimization of an existing Windows XP system in order to get a faultless run of the realtime modules of WinPC-NC Light and Economy without any interferences by other processes.

Uploaded by

cncstep
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Optimization of the computer and the system

for using WinPC-NC Light and WinPC-Economy


Following operating manual provides instructions concerning the optimization of an existing Windows XP system in order to get a faultless run of the realtime modules of WinPC-NC Light and Economy without any interferences by other processes. The displayed screenshots are adopted from a computer as sample and may differ slightly from your systems. Using Windows 2000 instead of Windows XP, additional deviations may occur. However, the basic instructions apply to all systems and are similiar to each other. It is advisable to contact an expert if you are inexperienced in this subject or uncertain in operation. Probably it will not be necessary to carry out all described steps. Please effect those actions promising the best results. Furthermore, multiple tests are recommended in order to try out the running course of motors and realtime control.

1. Deactivating Firewall, virus scanner and automatic updates


Open the Control panel under Start-settings and select Security Center. Now deactivate the internal Firewall, the automatic updates and the virus scanner. This action is confirmed by closing the safety center.

2. Deactivating additional background programs


Open the window System Properties by clicking the right mouse button to My Computer and Properties. Select now the category System Restore. Activate the setting Turn off System Restore by clicking the checkbox.

Continue the procedure by selecting the window Advanced and Error Reporting. Now deactivate Error Reporting for system and programs.

Select the window Remote and deactivate all functions by removing the hooks from the checkboxes.

Select Advanced followed by Performance Options. Activate Best performance in the category Visual Effects.

Select Advanced under Performance Options in the same window. Activate Background services and System cache.

3. Changing display options


Activate display options by clicking the right mouse button on to the desktop background and select the option Windows Classic under Themes and Appearance.

Select the category Desktop and switch off the background pictures. Please deactivate all functions of the screen saver in the dialog box Screen Saver as well as all functions und times in the box Power Options. It is recommended to select Always On and the parameter Never with all shutdown times and functions.

4. Deactivating the drive index


Select successively your harddisk drives under My Computer by a right mouse click and open the dialog box Properties. Deactivate the function Allow indexing service.

5. Removing programs and services which are not required when starting the system
Select the command line under Start-run...and insert msconfig in order to start a system program. Select Services and check the register for useless or not required services. It is recommended to deactivate most of these programs. The same procedure has to be effected under the category Startup with the automatic loading programs. For testing purposes you can deactivate programs which are not required or whose necessity or function is unknown.

Save your settings by the parameter Apply and ok and restart your computer.

6. Deactivating ACPI mode and defining standard computer


Considerable progress concerning the optimizing options may be obtained by deactivating the ACPI mode. For this procedure please call up Control panel followed by System properties, Hardware and Device manager.

Select the entry ACPI Uni/MultiprocessorPC under Computer and activate the right mouse button.

First select Update driver and in the next dialog boxes activate make no connection with Windows update followed by installing software of a list.

Select Don't search. I will choose the drive to install, then adopt Standard PC from the list. After confirming Next and finished driver installation the computer should be restarted.

7. Optimizing adjustments in the BIOS of the computer


A lot of settings affecting usual operation are already integrated in the BIOS of the computer. However, they may interfere realtime operation. In order to be able to modify these settings, you have to shut down or restart the computer. At the beginning of the BOOT operation you have to press a specific key. Normally this key is displayed and it is either key (F2) or key (F8). You should proceed with the greatest possible care when modiyfing these settings. In order to avoid problems, it is recommended to contact an expert. The used pages and displays depend on the manufacturer of the computer or of the BIOS and are not similiar with all computers. Following tips are examples and given for possible optimizations.

Using modern computers with HT (HyperThreading) architecture it is advisable to deactivate the HT functions.

Normal, SPP or compatible mode should be selected for the mode settings of the parallel printer port LPT. The corresponding term may vary from BIOS to BIOS. In any case you should avoid the setting of one of the actual bidirectional modes.

All options for the Power management settings should be deactivated, this means deactivation of any mechanisms for power savings . Additional computer components as modem, sound, networks, USB ports, etc. should mereley be activated if required. Everything else can be deactived.

This manual has been thoroughly compiled and all indications should be considered as a kind of proposal. Tests concerning computer optimization should be cautiously carried out. Any feedback from users concerning this subject is appreciated.
5.2.07

Burkhard Lewetz Hard-Software Brckenstr. 7 D-88074 Meckenbeuren [email protected] www.Lewetz.de

You might also like