MPQ1000

Handheld Power Quality Analyzer

„ Automatic CT recognition
„ Automatic connection verification
„ On-board data analysis
„ SD card and USB stick support
„ 1000 V ac and 1000 V dc range
„ Scope and DMM modes
„ CATIV @ 600 V
„ IEC61000-4-30 Class A compliant

DESCRIPTION FEATURES AND BENEFITS

The Megger MPQ1000 Power Quality Analyzer is an
advanced handheld 3-phase analyzer. It is a highly intuitive „ Automatic CT recognition means never having the unit
programmed for an incorrect range.
analyzer that delivers unmatched capability in a smart
ergonomic platform. View RMS data, waveforms, demand „ CTs are powered by the unit so there is no need for
additional connections or batteries.
data, phase angles, harmonics, unbalance, flicker and more
in real time with the MPQ1000 scope mode and DVM mode. „ Connection verification ensures the unit is configured
correctly and you get the data you need — no wasted
When data needs to be recorded the MPQ1000 record recordings.
verification will automatically identify the current clamps,
„ On-board data analysis saves time by allowing an
recognize their range and verify the unit is connected properly. immediate examination of data before leaving the site.
Simply connect it and push the record button. The MPQ1000
„ Multiple communication methods (USB, Ethernet,
can record for extended periods of time because of its massive USB stick or SD card) allow for flexible and convenient
memory. It utilizes an SD card, which makes expanding the operation.
memory as easy as installing a new SD card. The recorded „ Removable SD card allows for large recording capabilities
data can be viewed on the MPQ1000 color VGA display or and simple memory expansion.
the data can be transferred to the high power Megger PQ „ The expanded 1000 V ac range allows for more
Power Quality Analysis software via USB cable, USB stick, application; no need for a second unit.
Ethernet or directly from the „ 1000 V dc measurement allows testing and analysis of
SD card. renewable applications dismissing the need for additional
equipment.
MEASURED PARAMETERS „ CATIV @ 600 V assures a safe unit for all applications.
„ RMS voltage / current „ Total harmonic distortion „ Full-featured Class A compliant (all parameters) ensures
the recording of correct values.
„ DC voltage „ Total demand distortion
„ DC current (requires dc CT) „ Harmonics „ Smart configuration in the Megger PQ software for quick
and easy setup.
„ Phase-to-phase voltage „ Inter-harmonics
„ Phase angle stability measurement lets you easily find
„ Power parameters „ Energy parameters
tricky phasing problems caused by multiple erratic sources.
(KW, KVAR, KVA, DPF, TPF) (KWH, KVARH, KVAH)
„ Voltage sag/dips and swells „ Mains signaling „ Timed waveform capture allows for the taking of PQ
events and periodic waveforms at the same time.
„ Phase angles „ Harmonic direction
„ Easy intuitive menus allow for simple navigation and
„ Current sags/dips and swells „ IEC flicker
operation.
„ Transient down to 1 msec „ Rapid voltage change
„ Free software included means no license or dongle
„ IEC unbalance „ Phase angle deviation required.
„ Frequency „ ANSII unbalance
„ Event waveform capture „ Timed waveform capture
 MPQ1000
Handheld Power Quality Analyzer

APPLICATIONS Environmental
Operating: -20° C to 50° C (-4° F to 122° F)
Using experience gained from supplying a multitude of
Storage: -30° C to 60° C (-22° F to +140° F)
analyzers to a large number of utilities, industries and Relative humidity: 0-95% non-condensing
service providers, Megger has designed the most versatile Altitude <2000 m: 1000V CAT III / 600 V CAT IV
unit available today. Some of the applications include the Altitude 2000 m - 5000 m: 600 V CAT III / 300 V CAT IV

following:
Case
„ Compliance testing to any PQ standard IP54 enclosure
Kensington lock
„ Power factor studies
Display
„ Load studies and load balancing Backlit 11.5 cm x 8.5 cm color VGA
Resolution 5.56 pixels per mm (640 x 480 pixels, 115.2 x 86.4 mm)
„ Billing verification Refresh rate: 1-3 sec
„ Substation monitoring
PQ Events
„ Capacitor bank sizing Dips / sags: Triggers off of voltage and current. IEC61000-4-30
compliant.
„ Transformer analysis and de-rating Swells: Triggers off of voltage and current. IEC61000-4-30 Compliant
Sub-cycle distortions: Triggers off of voltage and current. IEC61000-4-
„ Motor troubleshooting and inrush testing 30 compliant.
Transient detection: 1 μsecond. Triggers off of first 3 voltage channels.
„ Switchgear and component failure IEC61000-4-30 compliant.
THD: Triggers off of voltage and current. IEC61000-4-30 Compliant
„ Tripping breakers
Rapid Voltage Change (RVC): Triggers off of first 3 voltage channels.
„ Equipment tripping offline IEC61000-4-30 compliant.
Phase shifts: Trigger event when a phase shift occurs between the
„ Dimming/surging lighting voltage channels. Record date and time, duration and waveforms of all
enabled channels. Phase shift user selectable down to 1 degree.
„ Lamp flicker analysis Waveform capture of events: Capture waveforms on all enabled
channels when an out of limits event occurs. Waveforms
„ Neutral overheating programmable with up to 9 pre-trigger cycles and 99 post-trigger
„ Solar (PV) analysis cycles.
Timed waveform capture: Captures waveforms periodically on all
enabled channels. Waveform capture interval programmable down
to 1 cycle. Programmable number of cycles to be captured up to 99
SPECIFICATIONS cycles.
Input Power Event triggered waveforms and timed triggered waveforms
120/240 V, 50/60 Hz simultaneously.
International power adapter supports US, UK, EU and Australian plugs Mains signaling events: Two selectable frequencies and amplitudes.
Selectable time interval. Measured per IEC61000-4-30.
Battery Captures waveforms on all enabled channels when a mains signaling
NiMH battery pack (field replaceable) event occurs. Waveform programmable with up to 9 pre-trigger cycles
Discharge time – up to 8 hours and 99 post-trigger cycles.
Recharge time – 3 hours Event Flagging: Measured per IEC61000-4-30.

Data storage Motor Inrush

External SD card (32GB max) Records RMS, Power and PF at a 1 cycle resolution.
Capture inrush current during motor start up.
Communication Support both three-phase and single-phase motors.
USB communications
Ethernet communications: network communications.
Wireless communications with off-the-shelf bridge.
USB stick - transfer data file to USB. Transfer setup configurations to
and from USB stick. Perform firmware upgrades using USB stick.
SD card: automatically writes data to SD card; no manual transfer
required. Transfer setup configurations to and from SD card. No tool
needed to access the SD card.
MPQ1000
Handheld Power Quality Analyzer

Real Time Data Current Channels

Scope Mode: View waveforms in scope mode 4 current channels
Freeze, zoom and pan Current range: 0 to 6000 A (CT dependent)
View Vector scope Current ratios: Adjustable current ratios for measuring secondaries
View ANSI unbalance (000.1 through 9999)
View IEC unbalance Current accuracy: ±0.5% of reading ±0.05% of full scale
View harmonic in real time Resolution: 16 bit
View inter-harmonics in real time Crest factor: 4.0
View RMS voltage and current in real time
DMM Mode: View IEC unbalance Power and Energy
View Harmonic in real time Active power (KW): Per IEEE1459
View RMS voltage and current in real time Reactive power (KVAR): Per IEEE1459
View THD in real time Apparent power (KVA): Per IEEE1459
View active power in real time Energy parameters
View reactive power in real time (KWH, KVARH, KVAH): Per IEEE1459
View apparent power in real time Displacement power
View DPF in real time factor range: -1.0 to +1.0
View TPF in real time Displacement power
View flicker in real time factor accuracy: = ±0.02 + CT error
True power factor range: 0.0 to +1.0
True power factor accuracy: = ±0.02 + CT error
Compliance Power configurations: 11
IEC61000-4-7 IEC61000-4-30 (Class A) Aggregation window: 1 cycle to 1 hour - fixed and sliding
IEC61000-4-15 IEC61000-4-27 windows
IEC61010-1 IEC61326 Unbalance: ANSI & IEC methodology per
IEC60529 MIL-STD-810-G IEC61000-4-27
IEEE1453 CAN/CSA-C22.2 No. 1010.1-92 Total Harmonic Distortion (THD): Per IEC61000-4-30
RoHS2 Directive 2011/65/EU IEEE1459 per IEC61000-4-7
Harmonics: 0 through 50th continuous
Dimensions Inter-harmonics: 0 through 50th continuous
269 mm x 178.4 mm x 70.7 mm (10.6 in. x 7.0 in. x 2.8 in.) Total Demand Distortion (TDD): Per IEEE519
Frequency: Per IEC61000-4-30
Weight Flicker: Per IEC61000-4-15
Standard unit: 1.82 kg (4 lbs)

Sampling
Resolution: 16 bit analog to digital converter on 8 channels
Max sampling speed: 1 MHz max
Max RMS sampling: 17,664 per channel max
PLL synchronization: 42.5 Hz to 69 Hz

Real Time Clock

Accuracy ±20 ppm

Trended Parameters
Voltage
4 voltage channels
Voltage range: 0 to 1000 V range AC RMS DC
Measures AC & DC simultaneously (common neutral required)
Voltage accuracy: 0.1% per IEC61000-4-30
Voltage ratios: Adjustable voltage ratios for measuring
secondaries. (.0001 through 9999)
Resolution: 16 bit
Crest factor: 1.5
Max pk voltage: 1628 V / 2500 V
Voltage lead set: 5 voltage leads, 6 ft (2 m) in length. Safety banana
leads. Removable alligator clips. Optional plunger
clips. Set of color bands for customizing color
codes. Safety green/yellow ground lead included.
Fused adapter: In line with voltage leads to provide fuse
protection (optional).
 MPQ1000
Handheld Power Quality Analyzer

Functions Measurement Parameters

Auto identify CT and CT range setting RMS voltage
RMS current
Configuration verification - Display if unit is connected incorrectly. Sags / dips / swells
Transients (1 msec) (±2697 V)
On board analysis - Perform data analysis on unit. Compare recorded Sub-cycle events 64 msec (notching, noise)
values against customizable templates. Rapid voltage change
Phase angle stability
Waveform analysis through the 128th order. IEC Unbalance
ANSII Unbalance
Clock hour orientation - Time sync recording to nearest interval. Power (KW, KVAR, KVA, DPF & TPF)
Energy (KWH, KVARH & KVAH)
Scheduled run - Select start and stop time of recording. Instrument Power Factor (1 to 0 to -1)
then automatically begins recording. Phase Angle
THD/TDD
On board configuration - Ability to configure recording parameters Harmonics
from front panel of instrument. Inter-Harmonics
Power Harmonics
Auto Setup - Ability to have instrument automatically configure itself. Harmonic Direction
Flicker
On board naming of data and setup files -Ability to name data and Waveform Capture
setup files from the front panel of the instrument. Frequency

Supported languages: English, Spanish, French, German & Czech Software

Windows compliant (Win 7, Win 8 and Win 10)
On Board Instrument Preference Settings: See MPQ Analysis Software datasheet for details
Selectable Traces Colors
Selectable Short Cut Buttons ACCESSORIES
Selectable Time Out Period
Instrument strap (P/N 2009-205)
Chart Grid ON / OFF
Two-piece strap for hanging instrument from both metallic and
nonmetallic structures. One piece is attached to the instrument; the
other piece wraps around any structure, then they clip together.

Power Quality Simulator (P/N MPQ-SIM-01)

An ideal training tool. Creates a three-phase source, 50/60 Hz and

loads off of single-phase dc adapter.
„ Create dips and swells on voltage and current channels
„ Create transients
„ Create phase shifts between voltage channels
„ Create phase shifts between voltage channels and current channels
„ Create harmonics
„ Create flicker
„ Create power reversals
MPQ1000
Handheld Power Quality Analyzer

OPTIONAL ACCESSORIES Split Core Current Clamp Split Core Current Clamp
1000 A Available options:
CP-1000WCE-ID 1000 A split core CT (CP-1000WCE-ID)
100 A (CP-100CE-ID)
20 A (CP-100CE-ID)
CP-100CE-ID 100 A split core CT 5 A (CP-5CE-ID)

CP-20CE-ID 20 A split core CT

CP-5CD-ID 5 A split core CT

CP-600DC-ID 600 A split core AC/DC current clamp

MCCV Rain Tight Flexible Current Clamps

These flexible rain tight CTs have four current ranges that are all
self-identifying.

The current clamps are powered from the MPQ1000 Analyzer and
come in three different diameters (18 cm, 27 cm, and 37 cm). Hall Effect Current Clamp
600 A dc and 400 A ac
Ranges include 60 A, 600 A, 3000 A and 6000 A. (CP-600DC-ID)

MPQ1000 Voltage Lead Set

Standard set of voltage leads included with MPQ1000.

Includes: 5 voltage leads and 1 ground lead. MCCV Rain Tight Flexible
Current Clamps
Range = 0 to 1000 V ac/dc Available diameters:
18 cm (MCCV6000-18)
Multiple colar straps. Configure your voltage leads for the required 27 cm (MCCV6000-27)
color code. 37 cm (MCCV6000-37)

CAT IV @ 600 V

1008-645 Optional Fuse Adapter Kit

This adapter connects to the MPQ1000 standard leads.

Includes 4 adapters with multiple color straps.

Optional Fuse Adapter Kit

(1008-645)

MPQ1000 Voltage Lead Set

(2007-259)

Optional Plunger Clips

(1008-756)
 MPQ1000
Handheld Power Quality Analyzer

ACCESSORY KITS

MPQ1000 Basic Kit

C/N MPQ1000-BASIC MPQ1000 Gold Kit
C/N MPQ1000-G-KIT
Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,
ethernet cable, universal power adapter, soft-sided carry bag plus fuse Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,
adapters and hanging strap. Does not include current clamps. ethernet cable, universal power adapter, soft-sided carry bag, plus
hanging strap, voltage lead plunger clips, and 3 MCCV6000-27 (four
range flex 27 cm ID) CTs

MPQ1000 Silver Kit

C/N MPQ1000-S-KIT

Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,

ethernet cable, universal power adapter, soft-sided carry bag, plus
hanging strap, voltage lead plunger clips, and 3 MCCV6000-18 (four MPQ1000 Gold Plus Kit
range flex 18 cm ID) CTs C/N MPQ1000-G-KIT-PLUS

Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,

ethernet cable, universal power adapter, soft-sided carry bag, plus
hanging strap, voltage lead plunger clips, and 4 MCCV6000-27 (four
range flex 27 cm ID) CTs

MPQ1000 Silver Plus Kit

C/N MPQ1000-S-KIT-PLUS

Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,

ethernet cable, universal power adapter, soft-sided carry bag, plus
hanging strap, voltage lead plunger clips, and 4 MCCV6000-18 (four
range flex 18 cm ID) CTs
MPQ1000
Handheld Power Quality Analyzer

SPLIT CORE CURRENT CLAMP KITS

Kit of 4 split core self ID 1000A PQ CT
C/N CP-1000WCE-ID-KIT

Split core current clamp for the MPQ and

PA9 series. Self-identifying on MPQ. Supports
1000A range. 6 ft. (1.82 m) cord.

Kit of 4 split core self ID 20A PQ CT

C/N CP-20CE-ID-KIT

Split core current clamp for the MPQ and PA9

series. Self-identifying on MPQ. Supports 20A
MPQ1000 Platinum Kit range. 6 ft. (1.82 m) cord.
C/N MPQ1000-P-KIT

Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,

ethernet cable, universal power adapter, soft-sided carry bag, plus
hanging strap, voltage lead plunger clips, and 3 MCCV6000-37 (four Kit of 4 split core self ID 5A PQ CT
range flex 37 cm ID) CTs C/N CP-5CE-ID-KIT

Split core current clamp for the MPQ and PA9

series. Self-identifying on MPQ. Supports 5A
range. 6 ft. (1.82 m) cord.

Kit of 4 split core self ID 1-100A Mini CT’s

C/N MCP-100CE-ID-KIT

Split core current clamp for the MPQ and PA9

series. Self-identifying on MPQ. Supports 1 to
100A range. 6 ft. (1.82 m) cord. Dimensions
5.47x2.0x1.18” (139x51x30mm) Inner ID =
0.94”

Kit of 3 split core self ID 600A (AC/DC) PQ CT

C/N CP-600DC-ID-KIT
MPQ1000 Platinum Plus Kit
C/N MPQ1000-P-KIT-PLUS Wide band hall effect current clamp for the
MPQ and PA9 series. Self-identifying on MPQ.
Includes MPQ1000 analyzer, voltage leads, SD card, USB cable,
Supports 600A dc and 400A ac range. 6 ft.
ethernet cable, universal power adapter, soft-sided carry bag, plus
(1.82 m) cord.
hanging strap, voltage lead plunger clips, and 4 MCCV6000-37 (four
range flex 37 cm ID) CTs
4x
MCP-1000DC-ID Kit of 4 self ID 100/1000A (DC) PQ CT
C/N MCP-1000DC-ID-KIT

Hall effect current clamp for the MPQ and

PA9series. Self-identifying on MPQ. Supports
100A dc and 1000A dc range. 6 ft. (1.82 m)
cord.
 MPQ1000
Handheld Power Quality Analyzer

ORDERING INFORMATION
Item (Qty) Cat. No. Item (Qty) Cat. No.
MPQ1000 8 channel 3-phase power MPQ1000 Optional Accessories
quality analyzer
Fused adapter kit (3 adapters and fuses) 1008-645
*MPQ1000 basic kit MPQ1000-BASIC
Kit of 4 plunger clips 1008-756
*MPQ1000 silver kit MPQ1000-S-KIT
Instrument strap 2009-205
*MPQ1000 silver plus kit MPQ1000-S-KIT-PLUS
Power quality simulator MPQ-SIM-01
*MPQ1000 gold kit MPQ1000-G-KIT
Current Clamps
*MPQ1000 gold plus kit MPQ1000-G-KIT-PLUS
Four range 6000 A AC rain tight, MCCV6000-18
*MPQ1000 platinum kit MPQ1000-P-KIT self-identifying, flexible rope current
*MPQ1000 platinum plus kit MPQ1000-P-KIT-PLUS clamps (18 cm ID)
Four range 6000 A AC rain tight, MCCV6000-27
*See description of Kit contents on
self-identifying, flexible rope current
previous pages
clamps (27 cm ID)
Included Accessories
Four range 6000 A AC rain tight, MCCV6000-37
Unfused voltage lead kit 2007-259 self-identifying, flexible rope current
32 GB SD card 90023-619 clamps (37 cm ID)

USB memory stick: contains MPQ user 1009-697 1000 A AC split core current, self- CP-1000WCE-ID
guide, Megger PQ PC software and identifying current clamps (50 mm ID)
Megger PQ PC software user guide 1-100 A AC split core current, self- MCP-100CE-ID
USB communications cable CA-USB identifying mini current clamps (20
mm ID)
Ethernet communications cable 36798
20 A AC split core current, self- CP-20CE-ID
Soft sided case 2007-626-1 identifying current clamps (20 mm ID)
Universal 24 Vdc power adapter 90011-992 5 A AC split core current self- CP-5CE-ID
Battery pack 2008-369 identifying current clamps (20 mm ID)
AC/DC 600 A hall effect current self- CP-600DC-ID
identifying wide band current clamps
(50 mm ID)
DC 100A / 1000 A hall effect current MCP-1000DC-ID
self-identifying current clamps (50 mm
ID) No batteries required.
**Kit of 4 split core self ID 1000A PQ CP-1000WCE-ID-KIT
CT
**Kit of 4 split core self ID 20A PQ CT CP-20CE-ID-KIT
**Kit of 4 split core self ID 5A PQ CT CP-5CE-ID-KIT
**Kit of 4 split core self ID 1-100A MCP-100CE-ID-KIT
Mini CT’s
**Kit of 3 split core self ID 600A (AC/ CP-600DC-ID-KIT
DC)PQ CT
**Kit of 4 hall effect self ID MCP-1000DC-ID-KIT
100 / 1000A (DC) PQ CT
**See description of Kit contents on
previous pages

SALES OFFICE MPQ1000_DS_US_V05

Megger USA - www.megger.com
Valley Forge Corporate Center ISO 9001
2621 Van Buren Avenue, Norristown,
The word ‘Megger’ is a registered trademark
Pennsylvania, 19403, USA
T. 1-610 676 8500
F. 1-610-676-8610