Course Curriculam

Course Code: ES103 Credit Units L T P/S SW AS/DS FW No. of PSDA Total Credit Unit
Course Level UG 3 0 2 0 0 0 0 4
Course Title Basic Electrical Engineering

Course
Description :

Course Objectives :

SN
Objectives
.
The aim of this course is to make students aware of basic concepts of Electrical Engineering like: Fundamental Law’s & Theorems, analysis of AC &
1
DC Circuits and working principles of Electrical Machines.

Pre-Requisites : General

SN. Course Code Course Name

Course Contents / Syllabus :

SN. Module Descriptors / Topics Weightage

Module I: Ohm’s law, Resistance in series and parallel, Voltage divider and current division rules, types of resistors, Equivalent
DC Circuits resistance, Relative Potential Circuit Principles, Kirchhoff’s Current Law, Kirchhoff’s Voltage Law Network Reduction:
1 and Star–Delta Transformation, Source Transformation, Ideal Source, Independent Source and Controlled Source, Nodal 25.00
Network Analysis, Loop analysis. Superposition theorem, Thevenin’s Theorem, Norton’s theorem, Maximum Power transfer
Theorems theorem.
Module II: Generation of alternating voltages and currents, Peak, Average and RMS values for alternating currents, Form and
Alternating Peak factor, Power calculation, reactive power, active power, Complex power, power factor, Ac through resistance,
2 20.00
Current capacitance and inductance and RLC circuit, impedance, reactance, conductance, susceptance Series and Parallel
Circuits circuits, Resonance: series Resonance, parallel resonance, basic definition of Q factor & Band-width.
Module III: Types of instruments, Construction and working principles of PMMC and moving iron type voltmeters & ammeters,
3 Measuring Single phase dynamometer wattmeter, Use of shunts and multipliers (Simple numerical problems on shunts and 15.00
Instruments multipliers).
Module IV:
Generation, Phase sequence, Numbering, Interconnection- star and delta and current and voltages in them, Balanced
Three
4 star to delta and delta to star, Parallel loads, Power measurement in 3 phase circuits by three-watt meter, two and 20.00
Phase
one wattmeter method.
Circuits
Module V: Single Phase Transformer: Principle of operation, construction, EMF equation, Power Losses, Efficiency (Simple
5 Electrical Problems) DC machines: Principle and Construction, Types of DC machines based on excitation, Characteristics and 20.00
Machines Applications of DC motors (simple numerical problems).

Course Learning Outcomes :

SN. Course Learning Outcomes

1 Apply network theorems for the analysis of DC Circuits.
2 Understand the behaviour of AC in circuit with different elements
3 understand construction and working of different measuring instruments
4 learn about three phase circuit and voltages and currents in them.
5 understand construction and working of transformers and DC machines

Pedagogy for Course Delivery :

SN. Pedagogy Methods

1 Class room Lectures, assignments, Quiz.
2 Seminars and discussions
3 Practical on the Hard ware and study setups

Theory /VAC / Architecture Assessment (L,T & Self Work): 75.00 Max : 100

Attendance+CE+EE : 5+35+60

SN. Type Component Name Marks

1 Attendance 5.00
2 End Term Examination (OMR) 60.00
3 Internal CLASS TEST 15.00
4 Internal HOME ASSIGNMENT 10.00
5 Internal CLASS QUIZ 10.00

Lab/ Practical/ Studio/Arch. Studio/ Field Work Assessment : 25.00 Max : 100

Attendance+CE+EE : 5+35+60

SN. Type Component Name Marks

1 Attendance 5.00
2 External PRACTICAL 30.00
3 External Viva 30.00
4 Internal PERFORMANCE 15.00
5 Internal PRACTICAL / LAB RECORDS 10.00
6 Internal Viva 10.00

Lab/ Practical details, if applicable :

SN. Lab / Practical Details

1 To study and verify KVL in the given network.
2 To study and verify KCL in the given network.
3 To study and verify Superposition Theorem.
4 To study and verify Maximum Power Transfer Theorem.
5 To study and verify Reciprocity Theorem.
6 To study and verify Thevenin’s theorem in the given network.
7 To study and verify Norton’s theorem in the given network
8 To perform open circuit test on a single-phase transformer and to determine core losses and transformer equivalent circuit parameters.
9 To perform short circuit test on a single-phase transformer and to determine copper losses and transformer equivalent circuit parameters.
10 To perform regulation, ratio & polarity test on a single-phase transformer.

List of Professional skill development activities :

No.of PSDA : 0
SN. PSDA Point

Text & References :

SN. Type Title/Name Description ISBN/ URL

B.L. Thareja: Electrical Technology: Part -1
1 Book
& 2V
2 Book Schaum’s Series: Electrical Circuits
Basic Electrical Engineering by V.N Mittle,
3 Book
Arvind Mittle,TMG publication
Basic Electrical Engineering by, V.K Mehta
4 Book
S.Chand publication
5 Book Electrical Machines by V.K Mehta
Vincent DelToro, “ Electrical engineering
6 Book
Fundamentals”, PHI second edition 2011
Basic Electrical Engineering by Kothari
7 Book
Nagrath.