Product End-of-Life Disassembly Instructions

Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP Mini 110, 110-3500AA to 110-3599ZZ Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01 0 1 0 0 0 With a surface greater than 10 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 2 2 0 1 0

Include the cartridges, print heads, tubes, vent chambers, and service stations. 0

Page 1

Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 0

2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Torx screw driver T10/T5 Description #2 Description #3 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. Remove cartridges. Remove case part Remove service stations T10/T5

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01

Page 2

Working Instruction g
Document No. :Disassembly WI Name :Disassemble Battery&Disassemble Ver. :1.00 Step :1 Date :2010/7/06

STEP: 1.Disassemble Battery (Fig.1) 1 Di bl B tt (Fi 1) 2.Take Off The Service Cover (Fig.2) 3.Disassemble Rubber Root (Fig.3&Fig.4)

Fig. 1

Fig. Fi 2

Fig. 3

Fig. 4 Qty

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Note Book 1

Tabulator:

Nathan,Ho

Working Instruction g
Document No. :Disassembly WI Name :Disassemble Hinge cap Ver. :1.00 Step :2 Date :2010/7/06

Fig.1

Fig.2

Fig.3

Fig 4 Fi .4

STEP: 1. Open The Unit to 180 degree 2.Disassemble Hinge Cap

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho

Working Instruction g
Document No. :Disassembly WI Name :Disassemble Hinge Frame Ver. :1.00 Step :3 Date :2010/7/06

Fig.1

Fig.2

Fig. 3

Fig. 4 STEP: 1.Loosen Screws(M2.0xL2.5.)*2(Fig.1&2) Torsion1.50.2 kgfcm Screw can't be stripped 2.Take away the Hinge Frame Form the Unit

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble Antenna &WWAN Ver. :1.00 Step :4 Date :2010/7/06

Fig.1 STEP: 1. Take away the Blue and red Antenna Form the WWAN Card 2..Loosen Screw(M2.0xL3)*2 Torsion2.00.2 kgfcm Screw can't be stripped 3.Take Down WWAN Form MB

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble Antenna &WLAN Ver. :1.00 Step :5 Date :2010/7/07

Fig.1

STEP: 1. Take away the Black and White Antenna Form the WLAN Card 2..Loosen Screw(M2.0xL3)*2 Torsion2.00.2 kgfcm Screw can't be stripped 3.Take Down WLAN Form MB

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Down Memory Ver. :1.00 Step :6 Date :2010/7/06

Fig.1 STEP: 1.Take down Memory from MB

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Note Book 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble HDD Ver. :1.00 Step :7 Date :2010/7/06

2
HDD PullTab

Fig.1 STEP: 1.Loosen Screws(M2 x L4.5)*3 Torsion2.00.2 kgfcm Screw can't be stripped 2.Disassemble HDD by pull up the HDD pull-tab 3.Disassemble HDD Connecter

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Take Down HDD
1 2

Ver. :1.00 Step :8 Date :2010/7/06 STEP: 1.Loosen Screws(M3 x L3)*4(Fig.1&2) Torsion2.50.2 kgfcm Screw can't be stripped Fig. 1 2.Disassemble HDD Bracket(Fig.3)

Fig. 2

STEP:

Fig. 3 Fig.1 Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble DC In Cable & RTC Battery Rubber Ver. :1.00 Step :9 Date :2010/7/07

Gasket

DC In Cable

Fig.1

Fig.2

RTC_battery RTC Cable

Fig.3

Fig.4 STEP: 1. Take off 1pcs Gasket (Fig.1) 2. Take Off 1pcs Rubber(Fig.2) 3. Take Away RTC Cable From MB (Fig.3) 4. Take Away RTC Battery From MB (Fig.4) 5.Take Away DC in cable From MB (Fig.2)

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Loosen Screws Ver. :1.00 Step :10 Date :2010/7/07

1
Fig.1 STEP: 1.Loosen Screws(M2.0 x L4.5)*4 Torsion2.50.2 kgfcm Screw can't be stripped

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Loosen Screws Ver. :1.00 Step :11 Date :2010/7/07

Fig.1

STEP: 1.Loosen Screws(M2.5 x L5)*2 Torsion1.50.2 kgfcm Screw can't be stripped

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Loosen Screws Ver. :1.00 Step :12 Date :2010/7/07

2 1
Fig.1 3 STEP: 1.Loosen Screws(M2.0 x L4.5)*4 Torsion2.00.2 kgfcm Screw can't be stripped

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble K/B Ver. :1.00 Step :13 Date :2010/7/07

Fig.1

K/BConnecter Fig.2 STEP:

STEP: 1.Disassemble Key Board Frame and take it away Remove K/B from the top firstly, then with order 1 to 3 2.Pull Out K/B Connecter Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Loosen Screws Ver. :1.00 Step :14 Date :2010/7/07

6 1 2

7 8 5

3 4

Fig.1 STEP: 1.Loosen Screws(M2.0 x L4.5)*8 Torsion2.00.2 kgfcm Screw can't be stripped

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble Antenna &WWAN Ver. :1.00 Step :15 Date :2010/7/07

Speaker Cable
Fig.2 Fig.1

STEP: 1.Disassemble TP FFC (Fig.1) 2.Pull Out Speaker Cable (Fig.2) 3.Disassemble KB Deck (Fig.3)

Fig.3 Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassemble Antenna &WWAN Fig.1 Ver. :1.00 Step :16 Date :2010/7/07

LVDS Cable

Fig.2 Fig.3

STEP: 1.Disassemble LVDS Cable And Take It Away 2.Loosen Screws(M2 x L4.5)*2 (Fig.3) Torsion2.00.2 kgfcm Screw can't be stripped Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Down MB Ver. :1.00 Step :17 Date :2010/7/07

Fig.1

STEP: Take out the MB,The starboard side of MB first Notice: Dont Touch The Electronic Element

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Dissassembly Thermal Module Ver. :1.00 Step :18 Date :2010/7/07

Fig.1

Fig.2

STEP: 1.Loosen Screws(M2.0 x L4.5)*2(3&4) 2.Loosen Screws *2(1&2) Torsion2.00.2 kgfcm Screw can't be stripped 3.Disassemble Fan cable from MB (Fig.1) 4.Disassemble Thermal Module Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Qty Automatic crossing screw driver 1

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Disassembly Hinge Ver. :1.00 Step :19 Date :2010/7/06

Fig.1

2 1

Fig.2

Fig.3 STEP: 1.Disassembly Screws on the Hinge (M2.5*L5)*2 (Fig.2&Fig.3) 2.Pull the Antenna 3.Abruption D cover And LCD

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Down Hinge Ver. :1.00 Step :20 Date :2010/7/07

Fig.1

Fig.2

STEP: 1.Loosen Screws(M2 x L5)*2(Fig.1&2) Torsion2.00.2 kgfcm Screw can't be stripped 2.Take Away the Hinges

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Down B Cover Ver. :1.00 Step :21 Date :2010/7/06

Fig.1 STEP: Disassemble hook between PMMA and LCD with order 1 to 3

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Down B Cover Ver. :1.00 Step :22 Date :2010/7/07

Antenna Cross There

LVDS Cable Cross There

Fig.1 STEP: 1.Detach the PMMA,LVDS Cable Cross the orifice First 2.Antenna Cross the orifice

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Loosen Screws Ver. :1.00 Step :23 Date :2010/7/06

Fig.1

STEP: Fig.2 1.Loosen Screws(M2 x L3)*6 With Order 1 to 3 (Fig.1) Torsion1.50.2 kgfcm Screw can't be stripped

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator:

Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Disassembly Camera Ver. :1.00 Step :24 Date :2010/7/06

Camera

Fig.1

Camera

Mylar

Fig.2

STEP: 1.:Loosen Screws in the Camera Board (M2.0 x L2.5)*1 Torsion1.30.2 kgfcm Screw can't be stripped 2.Take off the Camera From A Cover 3. Tear the Mylar (Fig.3)

Fig.3

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Disassembly LCD Panel Ver. :1.00 Step :25 Date :2010/7/06

Fig.1

Fig.2

LVDS Cable

Adhesive Tape

Fig.3

Fig.4 STEP: 1.Overturn LCD,Tear the Adhesive tape 2.pull out LVDS Cable From LCD panel

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Take Out The LCD Panel Ver. :1.00 Step :26 Date :2010/7/06

Fig.1 Fig.2

Fig.3

STEP: 1.Take out the LCD panel 2.Tear the aluminum foil Around the panel

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name : Loosen Screws Ver. :1.00 Step :27 Date :2010/7/06

2
Fig.1

4
STEP: 1.Loosen Hinge Bracket Screws(M2x L2.5)*4(Fig.1&2) Torsion1.30.2 kgfcm Screw can't be stripped Fig.2

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty Automatic crossing screw driver 1

Qty

Tabulator: Nathan,Ho

Working Instruction
Document No. :Disassembly WI Name :Disassembly Antenna Ver. :1.00 Step :28 Date :2010/7/06

Fig.1

STEP: 1.Disassemble Bluetooth with Antenna and take it away(Fig.2)

Point for attention : If finding some defects,notice the gaffer and assisent Fixture list(Fixture standard) Fixture list(Fixture standard) Qty

Qty

Tabulator:

Nathan,Ho