Gate Valve

Download as pdf or txt
Download as pdf or txt
You are on page 1of 56

DISTRIBUTED VALVES

DEMCO Gate Valves

DEMCO

DISTRIBUTED VALVES

DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

TABLE OF CONTENTS

DEMCO GATE VAlVES


Introduction .......................................................................................... Series DM Gate Valves .......................................................................... Series DM 7500 Gate Valves ................................................................. Series DT/DB Gate Valves ...................................................................... PRODUCT SPECIFICATIONS General Technical Information .............................................................. 10 DIMENSIONS AND MATERIAlS PARTS lIST Series DM 7500 Gate Valves 7500 psi WP ............................................. 14 Series DM Gate Valves 2000, 3000 & 5000 psi WP ............................... 24 Series DM Gate Valves ASME Class 400 & 600 ...................................... 36 ASME Class 900 & 1500 ....................................................................... 40 Series DT Gate Valves ASME Class 600, 900 & 1500 ............................. 44 Aftermarket Services ............................................................................. 54 Trademark Information ......................................................................... 55 4 5 7 9

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO

DISTRIBUTED VALVES

Oklahoma City, OK

Camerons Valves & Measurement (V&M) group is a leading provider of valves and measurement systems to the oil and gas industry. The groups products are primarily used to control, direct and measure the flow of oil and gas as it is moved to refineries, petrochemical plants and industrial centers for processing. The Distributed Valves division provides valves products that are sold through distributor networks worldwide, for use in both oil and gas and industrial applications and include such widely recognized brand names as DEMCO, NAVCO, NUTRON, ThORNhIll CRAVER, TEChNO, TOM WhEATlEy, WhEATlEy and WKM. DEMCO gate valves are the valves of choice, engineered and proven for drilling and production industries. Designed for dependable, heavy duty performance in abrasive and corrosive service conditions, DEMCO gate valves are commonly selected for a number of oilfield applications.

DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM
DEMCO Series DM Gate Valves, the premier designed Gate Valve in the oil and gas drilling market, specifically engineered for the rigorous requirements of oilfield applications. Designed for dependable, heavy duty performance in abrasive service conditions, DEMCO DM gate valves are commonly selected for a number of oilfield applications, including:
Drilling standpipe manifold Pump manifold block valves High pressure mud mixing lines High pressure drilling system block valves Wellheads Well treating and frac service Production manifolds Production gathering systems Production flow lines

The DEMCO Series DM Gate Valves are available in ASME Classes 400, 600, 900 and 1500. Also available in API working pressures 2000, 3000 and 5000 psig. (Not API Monogrammed).

Features and Benefits


In-line Field Repairability
The bonnet is easily removed for internal parts inspection and / or replacement without removing the valve from the line. This design simplicity permits fast and easy service without the need for special tools.

Flexible Trim Offerings


Optional materials for stems, gates, seat inserts and seat elastomers make it easier to trim valves for a wide range of service conditions. Three internal plastic coatings for the body and bonnet are offered to improve resistance to wear and corrosion.

Double Acting Thread Design for Fast Operation


A The ASME series double acting thread design uses a threaded stem into the gate working with threads in the bonnet and handle assembly. Stems are polished and include a dependable O-ring and anti-extrusion seal. This unique design is economical and effective. Note: 4 inch (100 mm) ASME Class 1500 valve is a double acting, rising stem design, similar to the 4 inch (100 mm) 3000 psi valve. The DM 2000, 3000 and 5000 psig working pressure valves have double acting threads working together in a specially designed stem screw, screw housing and stem arrangement (except 4 inch (100 mm and larger 5000 psi is a single thread, heavy duty rising stem design with bearings). The rising stem design protects the stem threads from the lading. larger 3000 and 5000 psi DM Gate Valves include a sight lens to view the stem for determining gate position.
F

C D

DM 3 in. (80 mm) ASME 900/1500

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM 1000 - 5000 PSI
Exclusive Seat Design for Drop Tight Sealing
The DEMCO Series DM Gate Valve seat uses a unique design to provide a drop-tight shut-off in abrasive and erosive service. E The seat consists of two identical metal wear rings encapsulated in elastomer to form a cylindrical shape with a gate slot and two round ports. The closed gate bears on the downstream wear ring while the elastomer provides a drop tight pressure responsive seal around the port. F The cylindrical seat assembly fits into the machined body cavity and is expanded outward towards the valve ports by the bonnet and spread ring in the bottom of the seat. The expansion occurs when the bonnet is tightened on to the body while engaging the seat pin extensions from both wear rings. The spread ring ensures the seat elastomer presses uniformly against the body bore. This design ensures a tight seat seal against the body and around each valve port and has proven to be effective even if the gate and seat ring become scored or abraded during service. When it comes time for maintenance, the seats single piece design makes it easy to pull out of the body for replacement.

C B

DM 4 in. (100 mm) 5000 WP (4 Bolt design shown)

For proper valve repair use genuine DEMCO replacement parts.

DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM 7500 GATE VAlVES Features and Benefits
In-line Field Repairability
The bonnet is easily removed for internal parts inspection and/or replacement without removing the valve from the line. This design simplicity permits fast and easy service without the need for special tools.

heavy Duty Roller Bearings


heavy duty stem roller bearings reduces torque on 4 inch (100 mm) and larger valves.

Floating Slab Gate Design


A slab gate with T slot stem connection allows the gate to float to the seat providing a tighter pressure responsive seal.

Unique, abrasion resistant, one-piece seat design


The seat assembly consists of two stainless steel insert/ support rings to which a resilient elastomer is permanently bonded. The elastomer provides tight shut-off after long use in abrasive service. The stainless steel rings are corrosion and erosion resistant. The one-piece design makes field replacement easier.

Locking seat alignment


The seat assembly is engineered with a metal lock shell that aligns the seat in the bottom of the valve. This design ensures accurate seat alignment with minimum resistance to flow.

Body wear rings


Surface hardened alloy body wear rings back up both sides of the seat. These rings extend the service life of the valve by absorbing erosive wear that can damage the body around the seat bore area.
G

A C C A B C

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM 7500 GATE VAlVES
D Rising stem design
The DEMCO DM 7500 Gate Valve uses a rising stem design which isolates and protects the threads from the line medium. The rising stem also indicates gate position.

Replaceable stem packing


The stem packing can be replaced without removing the bonnet from the valve (3 inch 80 mm - 6 inch 150 mm) saving time when this maintenance may be required (note: line and valve pressure must be relieved before performing this maintenance).

Visual position indicator lens


On 3 inch (80 mm) and larger valves a clear position indicator lens allows the operator to easily determine whether the valve is open or closed. The indicator lens also helps to protect the stem threads from the elements.

Flow cleansed design


The body cavity area is designed to allow continuous flushing by the fluid flow. This action prevents the valve from sanding up, even in standpipe installations.

DM Series Pressure Classes and Sizes


SIZE
FP

in.
1 1/2 2 2 1/2 3 4 5 6

(mm)
(40) (50) (65) (80) (100) (125) (150) (50 x 40) (65 x 50) (80 x 50) (100 x 80) (125 x 100) (150 x 100) (150 x 125) (200 x 150)

400

600

900

1500

1000

2000

3000

5000

7500*

RP

2 x 1 1/2 2 1/2 x 2 3x2 4x3 5x4 6x4 6x5 8x6

* Other Weld Connections are Available. Consult Factory for Information.

DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT/DB GATE VAlVES
DEMCO Series DT/DB gate valves are recognized for their quality design, rugged dependability and corrosion resistance, particularly for use in waterflood and CO2 applications. DEMCO Aluminum Bronze and Stainless Steel valves and accessories are designed especially for the demanding requirements of corrosive CO2 injection and waterflood applications in the enhanced oil recovery market. he handle moves up and down on the bonnet or the top of the stem is visible during operation providing visible aid to T determine whether the valve is open or closed.
Seat Spring Stem threads isolated from line media Seat Seal

Four ring packing set

SEAT ASSEMBLY DETAIL P-10 (SEAT/SEAL OPTION 6) SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY Seat Seal

Full through conduit design

SEAT ASSEMBLY DETAIL PEROXIDE CURED BUNA OR VITON (SEAT/SEAl OPTION 1 OR 2) SEAT SEAl PART OF SEAT ASSEMBly

DT and DB Series Pressure Classes and Sixes


DT SERIES THREADED AND FLANGED SIZE in.
2 2 1/2 3 4 6

(mm)
(50) (65) (80) (100) (150)

ASME

600

900

1500

SEE PAGES 38 THROUGH 45 FOR MATERIAL SPECIFICATIONS Optional Materials: DT Series: SS Body and Bonnet, Viton or P-10 Seats DB Series: Viton Seat Elastomer Peroxide Cured Buna-N

FP

(Flanged Only) (Flanged Only)

DB SERIES VALVES (Consult Factory for Drawings)


FP RP 6 6x4 8x6 (150) (150 x 100) (200 x 150) CT-DEM-GATE-01 10/10 SWP-5M

DEMCO

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT/DB GATE VAlVES
Features and Benefits
In-line Field Repairability
The bonnet is easily removed for internal parts inspection and / or replacement without removing the valve from the line. This design simplicity permits fast and easy service without the need for special tools.

Corrosion Resistant Materials are Standard


Body and bonnet materials as well as all internal wetted parts comply with NACE RP-0475.
E

Rising Stem Design


The handle moves up and down on the bonnet or the top of the stem is visible during operation providing visible aid to determine whether the valve is open or closed.

Pressure responsive drop-tight sealing


Standard seats consist of 316 SS seat rings encapsulated with 90 Durometer, peroxide cured Buna-N elastomer to provide reliable, drop-tight sealing for extended service life.
C

Superior abrasion resistance


Buna-N elastomer encapsulated seats also provide an excellent deterrent to abrasion, further enhancing extended service life.
A

Four ring stem packing set


The DEMCO DT stem seal design uses four packing rings preventing leakage into the stem journal and outside the valve.

Through conduit gate design


Full through conduit design assures non turbulent flow and gate alignment for improved valve performance and longer service life.

Non wetted stem thread design


DEMCOs stem design isolates corrosive lading from contacting stem threads preventing stem seizure and assuring long trouble free valve performance.

Series DT Gate Valves

For proper valve repair use genuine DEMCO replacement parts.

10 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


ENhANCED OIl RECOVERy
Accessories
Ball check valves, flow tees and strainers are available to complete requirements for an entire injection assembly.
G

F G H

Ball Check Valves Flow Tees Strainers

Series DB Gate Valve


The DEMCO series DB gate valve is available for the large 6 in. (150 mm) and 8 in. (200 mm) pipe sizes in the enhanced oil recovery market. These valves also feature aluminum bronze body and bonnet as standard. Internal parts are 316 SS. The exclusive seat design of the DEMCO series DB gate valve is the same proven design found in the DEMCO series DM gate valves. The seat consists of two identical metal wear rings encapsulated in elastomer to form a cylindrical shape with a gate slot and two round ports. The closed gate bears down on the downstream wear ring while the elastomer provides a drop-tight, pressure responsive seal around the port. This design provides an effective seal even if the gate and seat ring become scored or abraded during service. The DEMCO series DB gate valve is also field repairable while the valve is in line.

Flow Tees

Ball Check Valves

Strainers

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 11

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM, DT & DB GATE VAlVES GENERAl TEChNICAl INFORMATION
Valve Size Designations and Weld End Dimensional Information
1. All references to pipe size in this catalog is the nominal size. The actual OD and ID for various nominal sizes and schedules is tabulated below. Weld End bodies are machined at each end to match the pipe OD and ID.
NOMINAL SIZE in.
1 1/2 2 2 1/2 3 4 5 6

ID (mm)
(40) (50) (65) (80) (100) (125) (150)

OD
1.900 2.375 2.875 3.500 4.500 5.563 6.625

Sch. 40
1.610 2.067 2.469 3.068 4.026 6.065

Sch. 80
1.500 1.939 2.323 2.900 3.826 4.813 5.761

Sch. 160
1.687 2.125 2.624 3.438 4.313 5.187

XXH
1.503 1.771 2.300 3.152 4.063 4.897

2. Reduced port valve size descriptions are designated by two numbers. The first number is the nominal size of the end connection. The second number is the ID of the valve seat (dimension C in the tables).

PRESSURE RATINGS
DEMCO gate valves are designed for the maximum working pressures and test pressures tabulated below.
CLASS 400
990 WP 1500 Test

CLASS 600
1480 WP 2225 Test

CLASS 900
2220 WP 3350 Test

CLASS 1500
3705 WP 5575 Test

1000 WP
1000 WP 2000 Test

2000 WP
2000 WP 4000 Test

3000 WP
3000 WP 6000 Test

5000 WP
5000 WP 7500 Test

7500 WP
7500 WP 11,250 Test

Gate valve rating must be selected to match the piping system in which the valve will be installed. Tabulated below are working pressures at 100o F for ASTM A106 Grade B and AISI 4130 60K minimum yield pipe in sizes corresponding to DEMCO gate valves.

ASTM A106 GRADE B SIZE in.


1 1/2 2 2 1/2 3 4 5 6 8

4130 60K MIN. YIELD XXH


5970 6590 5880 5150 4650 4724 -

(mm)
(40) (50) (65) (80) (100) (125) (150) (200)

Sch. 40
1340 1210 1620 1460 1300 1110 1030

Sch. 80
2430 2220 2590 2370 2130 1970 1970 1790

Sch. 160
4300 3950 3930 3830 3730 3650 -

XXH
10234 10080 8826 7971 8098 -

12 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM, DT & DB GATE VAlVES GENERAl TEChNICAl INFORMATION
Quality, Inspections, and Testing
C amerons quality system is based on ISO 9000 and API Q1 requirements and is certified ISO 9001:2008. The Cameron Quality Department monitors all phases of valve production from material receipt final inspection including a liaison with Third Party inspectors and certifying authorities. All DEMCO Gate Valves are hydrostatically tested; stem seal, body, and seat are inspected for zero leakage under pressure before being released for shipment. hydro test specifications are based upon API-6A latest Edition testing requirements; DEMCO DM 7500 Group 2 & 3 valves undergo additional test cycles indluding low pressure seat tests prior to being released for shipment.

Certifications
DEMCO DM5000 Gate Valves 2 - 5 are available with ABS Type Approval on request. DEMCO DM7500 Gate Valves 2 - 5 are available with ABS or DNV Type Approval on request.

Seat Seal Options


Buna-N (nitrile) Is excellent for petroleum oil an gases, fuel oils and alcohols from -10F to +200F (-23C to +93C). Hypalon Compounded for maximum chemical resistance. Particularly suited for oxidizing acids, it resists hydrocarbon oils and fuels from -10F to +250F (-23C to +121C). Viton highly resistant to mineral acids and hydrocarbons and resists moderate concentrations of hydrogen sulfide. Serviceable from -10F to +400F (-23C to +204C). (Not suitable for steam). HNBR Formulated for use with synthetic and oil base drilling mud service from -20F to +250F (-29C to +121C).

Coatings - DM Gate Valves Only


Internally plastic coated body and bonnet are offered with three coatings. All coatings are applied 5 to 6 mil thickness. DEMCO 10 A catalyst cured epoxy with excellent adhesion and resistance to wear, chipping and abrasion. Unaffected by most acids, alkalis, brines and petroleum products up to +150F (+66C). DEMCO 11 A baked on phenolic serviceable to +200F (+93C) and resistant to organic and mineral acids, hydrocarbons and corrodents encountered in oil and gas production. (Not recomended for caustics). DEMCO 12 A baked on phenolic epoxy, tougher and more abrasion resistant. Excellent for service in caustics and salt water up to

+200F (+93C).
ENDURO-BOND An engineered dry powder coating process for metal surfaces that provides a protective barrier against corrosion and abrasive wear. Coating thickness from 1-4 mil, superior to plastics, epoxies, and ceramics, high heat resistance to 800F (427C).

Ordering Information
Give size, pressure class and end connection. Specify pressure class of flanged ends, raised face (RF) or ring type joint (RTJ). For threaded ends, provide type of pipe: TBG (non upset tubing). lCSG (long casing thread). UPTBG (external upset tubing). CSG (Short casing thread). For weld ends, give schedule of mating pipe. F or applications in high pressure gas above 3000 psi or involving concentrations of H2S or CO2 consult factory for recommendations.

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 13

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 7500 psi WP 2 in. (50 mm) XXh WITh 1 1/2 BORE FOR GENERAl SERVICE CONDITIONS

14.00 (356) DIA


1 2 4

22 7 6 24 11 25 23

BRONZE BUSHING
8 26

13.04 (331) (Open)

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING

10 12 16

9 18

FLAT BOTTOM ADAPTER


13

2.63 (67)

20

15

14

21 A

19

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Weld End

2 in. (50 mm) FP 7500 WP


9.00 (229)

VALVE SEAT ID NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED WEIGHT lb. (kg)
Weld End

1.50 (38) 7.00


76 (34)

14 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Group 1 Group 2

Group 3

Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. hydrostatic shell test: 11,250 psi for 3 minutes. hydrostatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet. Same as Group 1 except: hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted. hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side. Test is charted. Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50F (-46C) on body, bonnet, stem, housing (2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem. Same as Group 2 plus volumetric NDE on body and bonnet.

Parts list
Key No. Qty. DESCRIPTION
1 2 4 6 7 8 9 10 11
n

VALVE SIZE GROUP NUMBER

GROUP 1
J025196

2 in. (50 mm) FP GROUP 2


J025197

GROUP 3

n n n n

1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1

Assembly Base Number Lube Fitting Handle Lock Handle Stem Screw Housing Seal Screw Housing Stem

12

n n

13 14 15
16 18

19
20

1 1

21
22 23 24 25 26

1 2 2 4 4

Weld End Steel Ductile Iron ASTM A536 Grade 65-45-12 AISI C-1213 AISI C-1213 Buna-N ASTM A350 Grade lF2 Class 1 410 SS 17-4 Ph SS hNBR Secondary Seal Viton AISI C-1213 Packing Retainer 17-4 Ph SS hNBR Stem Seal Assembly (With Bronze Bushing - ASTM B505 Alloy 93200) Viton AISI 302 SS Gate Clip Body Wear Ring For Steel Gate, AISI 4140 w/QPQ Nitride Coating For SS Gate, AISI 410 Stainless Steel hNBR Wear Ring Seal Viton ASTM A487 Grade 4 Class D Bonnet hNBR Bonnet Seal Viton Steel AISI 4140 w/QPQ Nitride Coating Gate 410 SS 17-4 Ph SS Weld End - ASTM A487 Grade 4 Class D Body Materials: Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges Seat Rings: AISI 410 SS, Elastomer: hNBR Rings: AISI 410 SS, Elastomer: Viton Steel Cotter Pin Housing Stud Material Housing Stud Nut Material Body Stud Material Body Stud Nut Material

J005195 2139712-01 J001891 J001913 J005526-224 J024982 J024983-107 Consult Factory 2712425-13 J005531-210 J001940 J021432

J023231-008 J023231-006 M450480 2269414-01 Consult Factory Consult Factory 2712425-18 J024985-030 2140428-01 2712425-60 J005521-342 2269412-01 Consult Factory Consult Factory Consult Factory For Body Part Numbers 2269403-01 Consult Factory J005420-18728 J002066 ASTM A193 Grade B7 2709000-08-01 ASTM A194 Grade 2h J015432 ASTM A193 Grade B7 2709000-10-01 ASTM A194 Grade 2h J021436 ASTM A193 Grade l7 J053252-034 ASTM A194 Grade 7 J021442 ASTM A193 Grade l7 J053252-038 ASTM A194 Grade 7

Consult Factory for Part Numbers

Major Repair Kit J025177-11574 - One Each For One Years Service.

Minor Repair Kit J025177-01574.


CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 15

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 7500 psi WP 2 in. (50 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
14.00 (356) DIA
1 2 4

22 7 6 24 11 25 23

BRONZE BUSHING
8 26

13.04 (331) (Open)

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING

10 12 16

9 18

FLAT BOTTOM ADAPTER


13

2.63 (67)

20

15

14

21 A

19

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Weld End Flanged End, API length

2 in. (50 mm) FP 7500 WP


9.00 (229) 20.50 (521)

VALVE SEAT ID FOR FLANGED ENDS


API Ring Number Flange ID Flange OD Flange Bolts (QTY. - SIZE in.)

2.00 (51)
BX-152 2.06 (52) 7.88 (200) 8 - 3/4

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED WEIGHT lb. (kg)


Weld End Flanged End

8.60
76 (34) 124 (56)

16 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Group 1 Group 2

Group 3

Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. hydrostatic shell test: 11,250 psi for 3 minutes. hydrostatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet. Same as Group 1 except: hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted. hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side. Test is charted. Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50F (-46C) on body, bonnet, stem, housing (2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem. Same as Group 2 plus volumetric NDE on body and bonnet.

Parts list
Key No. Qty. DESCRIPTION
Assembly Base Number

VALVE SIZE GROUP NUMBER

GROUP 1
J024993 J025130

2 in. (50 mm) FP GROUP 2


J025077 J005195 2139712-01 J001891 J001913 J005526-224 J024982 J024983-107 2712425-13 J005531-210

GROUP 3
J025078 J025131

Weld End Flanged End, API length Steel 1 1 Lube Fitting Ductile Iron ASTM A536 Grade 65-45-12 2 1 Handle AISI C-1213 4 1 Lock Handle n AISI C-1213 6 1 Stem Screw n Buna-N 7 1 Housing Seal ASTM A350 Grade lF2 Class 1 8 1 Screw Housing n 410 SS 9 1 Stem 17-4 Ph SS n hNBR 10 1 Secondary Seal Viton AISI C-1213 11 1 Packing Retainer 17-4 Ph SS n hNBR 12 1 Stem Seal Assembly (With Bronze Bushing - ASTM B505 Alloy 93200) Viton n AISI 302 SS 13 1 Gate Clip n 14 2 Body Wear Ring For Steel Gate, AISI 4140 w/QPQ Nitride Coating For SS Gate, AISI 410 Stainless Steel n hNBR 15 2 Wear Ring Seal Viton ASTM A487 Grade 4 Class D 16 1 Bonnet n hNBR 18 1 Bonnet Seal Viton n Steel AISI 4140 w/QPQ Nitride Coating 19 1 Gate 410 SS 17-4 Ph SS Weld End - ASTM A487 Grade 4 Class D 20 1 Body Materials: Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges n 21 1 Seat 410 SS/hNBR 410 SS/Viton Steel 22 1 Cotter Pin 23 2 Housing Stud Material 24 2 Housing Stud Nut Material 25 4 Body Stud Material 26 4 Body Stud Nut Material n Major Repair Kit J025177-10274 - One Each For One Years Service. Minor Repair Kit J025177-00274.

J001940 J023231-008 J023231-006 M450480 M452267 2139647-02 2712425-03 J005521-229 2140428-01 2712425-60 J005521-342 2171111-01 2139624-02

J021432

J024985-030

2140341-01

Consult Factory For Body Part Numbers 2139742-01 Rings: AISI 410 SS, Elastomer: hNBR Rings: AISI 410 SS, Elastomer: Viton J005420-18728 J002066 J021436 ASTM A193 Grade B7 ASTM A193 Grade l7 2709000-08-01 J053252-034 ASTM A194 Grade 2h ASTM A194 Grade 7 J015432 J021442 ASTM A193 Grade B7 ASTM A193 Grade l7 2709000-10-01 J053252-038 ASTM A194 Grade 2h ASTM A194 Grade 7

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 17

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 7500 psi WP 3 in. (80 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
23.00 (584) DIA
4

6 5

7 1

8 23 24

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
18 12

13 10 16 25 26 9

24.60 (625)

20

14

3.38 (86)
17 15 21 A 19

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Weld End Flanged End, API length

3 in. (80 mm) FP 7500 WP


13.00 (330) 24.38 (619)

VALVE SEAT ID FOR FLANGED ENDS


API Ring Number Flange ID Flange OD Flange Bolts (QTY. - SIZE in.)

3.00 (76)
BX-154 3.06 (78) 10.62 (270) 8-1

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED WEIGHT lb. (kg)


Weld End Flanged End

16.01
256 (116) 372 (169)

18 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Group 1 Group 2

Group 3

Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. hydrostatic shell test: 11,250 psi for 3 minutes. hydrostatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet. Same as Group 1 except: hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted. hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side. Test is charted. Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50F (-46C) on body, bonnet, stem, housing (2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem. Same as Group 2 plus volumetric NDE on body and bonnet.
VALVE SIZE GROUP NUMBER 3 in. (80 mm) FP GROUP 2

Parts list
Key No. Qty. DESCRIPTION
Assembly Base Number Lube Fitting Handle Stem Tube Stem Cap Key Stem Screw Housing Seal Housing

GROUP 1

GROUP 3

Weld End J025051 J025079 J025080 Steel J005195 1 1 Ductile Iron ASTM A536 Grade 65-45-12 2139481-01 2 1 Clear Acrylic J007459 3 1 Ductile Iron ASTM A536 Grade 65-45-12 J007411 4 1 Steel J005305-10016 5 1 n AISI C-1213 J007416 6 1 n Buna-N J005526-226 7 1 ASTM A350 Grade lF2 Class 1 J007418 J021448-040 8 1 Materials AISI C 1029 Normalized ASTM A352 Grade lCC n 410 SS J024951-107 9 1 Stem 17-4 Ph SS n hNBR 2712425-01 10 1 Secondary Seal Viton J005531-214 J007413 J021434 11 1 Packing Retainer Materials AISI C-1213 17-4 Ph SS n J001951-008 hNBR 12 1 Stem Seal Assembly (With Bronze Bushing - SAE 660) Viton J001951-006 n TEFlON/Phenolic J007426 13 2 Bearing n AISI 302 SS M450505 14 1 Gate Clip n For Steel Gate M452571 15 2 Body Wear Ring Material AISI 4140 w/QPQ Nitride Coating For SS Gate 2139648-02 Material AISI 410 Stainless Steel ASTM A487 Grade 4 Class D J017289-029 2140370-01 2140370-02 16 1 Bonnet n hNBR 2712783-03 17 2 Wear Ring Seal Viton J005521-340 n hNBR 2712787-07 18 1 Bonnet Seal Viton J005521-361 n AISI 4140 w/QPQ Nitride Coating 2171112-01 19 1 Gate 410 SS 2139628-02 17-4 Ph SS J024952-008 Weld End - ASTM A487 Grade 4 Class D Consult Factory For 20 1 Body Materials: Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges Body Part Numbers n 410 SS/hNBR 2139744-01 21 1 Seat Material Rings: AISI 410 SS, Elastomer: hNBR 410 SS/Viton Material Rings: AISI 410 SS, Elastomer: Viton J002072 J021441 23 2 Housing Stud Material ASTM A193 Grade B7 ASTM A193 Grade l7 2709000-09-01 J053252-036 24 2 Housing Stud Nut Material ASTM A194 Grade 2h ASTM A194 Grade 7 J015432 J021442 25 12 Body Stud Material ASTM A193 Grade B7 ASTM A193 Grade l7 2709000-10-01 J053252-038 26 12 Body Stud Nut Material ASTM A194 Grade 2h ASTM A194 Grade 7 n Major Repair Kit J025177-10374 - One Each For One Years Service. Minor Repair Kit J025177-00374. CT-DEM-GATE-01 DEMCO 10/10 SWP-5M

19

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 7500 psi WP 4 in. (100 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
20.00 (508) DIA

23

24

2 18 25 26 14

22

27.54 (700)
8 9

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
4 16 5

3 20 21

19

7 6 10 11

4.40 (112)

15 12 A

13

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Weld End Flanged End

4 in. (100 mm) FP 7500 WP


16.00 (406) 26.38 (670)

VALVE SEAT ID FOR FLANGED ENDS


API Ring Number Flange ID Flange OD Flange Bolts (QTY. - SIZE in.)

4.00 (102)
BX-155 4.06 (103) 12.44 (316) 8 - 1 1/8

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED WEIGHT lb. (kg)


Weld End Flanged End

21.36
310 (141) 475 (215)

20 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Group 1 Group 2

Group 3

Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. hydrostatic shell test: 11,250 psi for 3 minutes. hydrostatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet. Same as Group 1 except: hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted. hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side. Test is charted. Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50F (-46C) on body, bonnet, stem, housing (2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem. Same as Group 2 plus volumetric NDE on body and bonnet.
VALVE SIZE GROUP NUMBER 4 in. (100 mm) FP GROUP 2
J025101 J015334 J014832

Parts list
1 2 3
n

Key No. Qty. DESCRIPTION


1 1 4 1 1 1 1 10 10 1 1 1

n n

4 5 6 7 8 9

10
11

12

13
14

1 1 2

n n

15

16
18 19 20 21

2 1 1 1 1

Material AISI 302 SS Gate Clip hNBR Stem Seal Assembly (With Bronze Bushing ASTM B271 Alloy C95500) Viton 410 SS Stem 17-4 Ph SS ASTM A487 Grade 4 Class D Bonnet Body Stud Material Body Stud Nut Material hNBR Bonnet Seal Viton Weld End: ASTM A487 Grade 4 Class D Body Materials: Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges 410 SS/hNBR Seat Material 410 SS/Viton Material AISI 4140 w/QPQ Nitride Coating Gate - Steel / QPQ 410 SS 17-4 Ph SS Buna-N Housing Seal For Steel Gate Body Wear Ring Material For Stainless Steel Gate Material hNBR Wear Ring Seal Viton Stem Screw with Bearings Material Housing Secondary Seal Packing Retainer AISI C-1018 hNBR Viton Material Steel SAE Grade 5 Clear Acrylic Ductile Iron Steel Steel

Assembly Base Number Handwheel Handlewheel Screw Retainer Screw

Weld End Ductile Iron ASTM A536 Grade 65-45-12 AISI C-1018

GROUP 1
J025100

GROUP 3
J025081

J005665-32028 Alloy Steel

J005666-32028 18-8 SS M450505 J015853-008 J015853-006 2140684-01

2172523-01 2171976-11-01 ASTM A193 Grade B7 2709000-11-01 ASTM A194 Grade 2h

2172523-02 2172523-03 2171978-11-01 ASTM A193 Grade l7 J053252-140 ASTM A194 Grade 7 2712426-11 J005521-364 Consult Factory For Body Part Numbers 2139746-01 Rings: AISI 410 Stainless Steel, Elastomers: hNBR Rings: AISI 410 Stainless Steel, Elastomers: Viton 2171267-01 2139637-02

22 4 Housing Screw 23 1 Stem Tube 24 1 Stem Cap 25 1 Lube Fitting 26 1 Relief Fitting n Major Repair Kit J025177-10474 - One Each For One Years Service. Minor Repair Kit J025177-00474.

J005526-228 M452290 AISI 4140 w/QPQ Nitride Coating 2139649-02 AISI 410 Stainless Steel 2712787-04 J005521-349 J0023888 Stem Screw: AISI C-1018 Bearings: hardened Steel Needle Thrust Bearings J015332 2726268-01 J005531-216 J015330 2172425-02 AISI C-1018 AISI 4130 702500-14-00-34 J012852 J015855 J005195 J051971 CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 21

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 7500 psi WP 5 in. (132 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
24.00 (610) DIA

23

24

2 18 25 14

22

31.81 (808)
19 8 9

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
4 16 5

3 20 21

7 6 10 11

5.00 (127)

15 12 A

13

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Weld End Flanged End

5 in. (132 mm) FP 7500 WP


17.88 (454) 29.00 (737)

VALVE SEAT ID FOR FLANGED ENDS


API Ring Number Flange ID Flange OD Flange Bolts (QTY. - SIZE in.)

5.19 (132)
BX-169 5.12 (130) 14.06 (357) 12 - 1 1/8

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED WEIGHT lb. (kg)


Weld End Flanged End

27.67
506 (230) 761 (345)

22 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Group 1 Group 2

Group 3

Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. hydrostatic shell test: 11,250 psi for 3 minutes. hydrostatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet. Same as Group 1 except: hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted. hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side. Test is charted. Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50F (-46C) on body, bonnet, stem, housing (2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem. Same as Group 2 plus volumetric NDE on body and bonnet.
VALVE SIZE GROUP NUMBER
Weld End Ductile Iron ASTM A536 Grade 65-45-12 AISI C-1018

Parts list
Key No. Qty. DESCRIPTION
1 2 3
n

GROUP 1
J024994 J005665-32028 Alloy Steel

5 3/16 in. (132 mm) FP GROUP 2


J025083 J016986 J016987

GROUP 3
J025084

1 1 4 1 1 1 1 12 12 1 1 1

n n

4 5 6 7 8 9

10
11

12

13
14

1 1 2

n n

15

16
18 19 20 21

2 1 1 1 1

Material AISI 302 SS Gate Clip hNBR Stem Seal Assembly (With Bronze Bushing ASTM B271 Alloy C95500) Viton 410 SS Stem 17-4 Ph SS ASTM A487 Grade 4 Class D Bonnet Body Stud Material Body Stud Nut Material hNBR Bonnet Seal Viton Weld End: ASTM A487 Grade 4 Class D Body Materials: Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges 410 SS/hNBR Seat Material 410 SS/Viton Material AISI 4140 w/QPQ Nitride Coating Gate - Steel / QPQ 410 SS 17-4 Ph SS Urethane Housing Seal For Steel Gate Body Wear Ring Material For Stainless Steel Gate Material hNBR Wear Ring Seal Viton Stem Screw with Bearings Material Housing Secondary Seal Packing Retainer AISI C-1018 hNBR Viton Material Steel SAE Grade 5 Clear Acrylic Ductile Iron Steel

Assembly Base Number Handwheel Handlewheel Screw Retainer Screw

J005666-32028 18-8 SS M451649 J016995-008 J016995-006 J024943-107

J024956-030 2171976-12-01 ASTM A193 Grade B7 2709000-12-01 ASTM A194 Grade 2h

J024956-051 J024956-052 2171978-12-02 ASTM A193 Grade l7 J053252-142 ASTM A194 Grade 7 2712425-78 J005521-446 Consult Factory For Body Part Numbers 2139748-01 Rings: AISI 410 Stainless Steel, Elastomers: hNBR

22 4 Housing Screw 23 1 Stem Tube 24 1 Stem Cap 25 1 Lube Fitting n Major Repair Kit J025177-10574 - One Each For One Years Service. Minor Repair Kit J025177-00574.

Rings: AISI 410 Stainless Steel, Elastomers: Viton 2171108-01 2139629-02 J024957-008 2726191-02-95 M452619 AISI 4140 w/QPQ Nitride Coating 2139650-02 AISI 410 Stainless Steel 2726268-02 J005521-435 J023848 Stem Screw: AISI C-1018 Bearings: hardened Steel Needle Thrust Bearings J018190 2712425-12 J005531-218 J018191 2171930-01 AISI C-1018 AISI 4130 702500-16-00-40 J018192 J018193 J005195

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 23

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 2000, 3000 & 5000 psi WP 2 in. (50 mm) FUll PORT & 2 1/2 in. (65 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
14.00 (356) DIA
1 2 4

22 7 6 8 10 15

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING

11 13 12

13.00 (330) (Open)

16 17

FLAT BOTTOM ADAPTER

18 9

2.00 (51) 2.62 (67)

20

21 A

19

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded, Weld and Grooved Flanged - RTJ Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ)

2 in. (50 mm) FP & 2 1/2 in. x 2 in. (65 mm x 50 mm) RP* 2000 WP - 4000 TEST
9.00 (229) 11.62 (295) 6.50 (165) 8 - 5/8 R-23 9.00 (229) -

3000 WP - 6000 TEST


9.00 (229) 11.62 (295) 8.50 (216) 8 - 7/8 R-24 9.00 (229) -

5000 WP - 7500 TEST


9.00 (229) 12.12 (308) 8.50 (216) 8 - 7/8 R-24 9.00 (229) -

WEIGHT lb. (kg)


Threaded, Weld, Grooved Flanged * 2 1/2 in. x 2 in. (65 mm x 50 mm) RP Only Available in Weld End. 56 (25) 70 (32) 56 (25) 70 (32) 58 (26) 100 (45) 58 (26) 100 (45) 58 (26) 110 (50) 58 (26) 110 (50)

24 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
Assembly Base Part Number

VALVE SIZE

2 in. (50 mm) FP & 2 1/2 in. (65 mm) RP 2000 WP 3000 WP 5000 WP

n n

n n

1 2 4 6 7 8 9 10 11 12 13 15 16 17

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Lube Fitting Handle Lock handle Stem Screw Stem Screw Seal Screw Housing Stem Secondary Seal Retainer Stem Seal Assembly Lock Screw Coupling Bonnet Index Pin Bonnet Seal Gate

18 19
20

2 in. (50 mm) Full Port Threaded J001026 J001027 J001028 - Weld J001029 J001030 J001031 - Grooved J011920 - Flanged J001023 J001024 J001025 2 1/2 in. (65 mm) Reduced Port - Weld J001115 J001114 J001109 Steel J005195 J005195 J005195 ASTM A536 Ductile Iron 2139712-01 2139712-01 2139712-01 C-1213 J001891 J001891 J001891 C-1213 J001913 J001913 J001913 Buna-N J005526-224 J005526-224 J005526-224 C-1018 J001848 J001848 J001848 303 SS -002, 316 SS -008 J001931-XXX J001931-XXX J001931-XXX Buna-N J005526-210 J005526-210 J005526-210 C-1213 J001940 J001940 J001940 Buna-N -001, Viton -006 J001949-XXX J001949-XXX J001949-XXX Steel J005665-22004 J005665-22004 J005665-22004 A216 Steel -020, A487 Steel -030 J001446-020 J001446-020 J001445-030 ASTM A105 J001237-XXX J001237-XXX J001237-XXX Coatings Uncoated-020, Coated DEMCO 10-021, DEMCO 11-024, DEMCO 12-025 Steel J001981 J001981 J001981 Buna-N J005526-342 J005526-342 J005526-342 Viton J005531-342 J005531-342 J005531-342 J001887-XXX J001887-XXX J001887-XXX Materials AISI 1045 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008

21

Body Materials: Threaded, Weld & Grooved - ASTM A105 Normalized 2000 Flanged - Fabricated from Weld Body and Commercial Flanges 3000 Flanged - ASTM A216 Grade WCB 5000 Flanged - ASTM A487 Grade 4A or 2B Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly Materials

Consult Factory For Body Part Numbers

22 1 Pin, Lock Handle Major Repair Kit J025091-10221 - One Each For One Years Service. Minor Repair Kit J025091-00221.
n

Steel

J001876-0XX J001876-0XX J001876-0XX Inserts: -01X Ductile Iron ASTM A395 or Steel AISI C1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon J005420-18728 J005420-18728 J005420-18728

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 25

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 2000, 3000 & 5000 psi WP 2 1/2 in. (65 mm) & 3 in. (80 mm) FUll PORT 4 in. (100 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
D 1 4

22

7 6 8

2 23 24

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
12

11 10 25 26

9 16 18

20 21 19 A

Dimensional Data & Weights


FP VALVE SIZE in. (mm) DIMENSION
A B C D E Threaded, Weld & Grooved Flanged - RTJ Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Threaded, Weld & Grooved Flanged - RTJ (Open) (Seat Bore)

2 1/2 (65) 3 (80) 2000 WP - 4000 TEST


9.75 (248) 16.62 (422) 17.00 (432) 2.50 (64) 19.00 (483) 3.12 (79) 3.19 (81) 7.50 (191) 8 - 3/4 R-26 74 (34) 141 (64) 11.00 (279) 14.12 (359) 18.00 (457) 3.00 (76) 19.00 (483) 3.50 (89) 3.50 (89) 8.25 (210) 8 - 3/4 R-31 95 (43) 131 (59)

RP 2 1/2 (65) 3 (80) 4 x 3 (100 x 80) 3000 WP - 6000 TEST


9.75 (248) 16.62 (422) 17.00 (432) 2.50 (64) 19.00 (483) 3.25 (83) 3.19 (81) 9.62 (244) 8-1 R-27 87 (39) 170 (77) 11.00 (279) 14.12 (359) 18.00 (457) 3.00 (76) 19.00 (483) 3.69 (94) 3.69 (94) 9.50 ( 241) 8 - 7/8 R-31 113 (51) 175 (79) 11.00 (279) 18.00 (457) 3.00 (76) 19.00 (483) 3.69 (94) 113 (51) -

FP RP 3 (80) 4 x 3 (100 x 80) 5000 WP - 7500 TEST


11.00 (279) 15.62 (397) 18.00 (457) 3.00 (76) 19.00 (483) 3.94 (100) 3.94 (100) 10.50 (267) 8 - 1 1/8 R-35 140 (64) 241 (109) 11.00 (279) 18.00 (457) 3.00 (76) 19.00 (483) 3.94 (100) 140 (64) -

WEIGHT lb. (kg)


Threaded, Weld & Grooved Flanged

26 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
Assembly

VALVE SIZE

2 1/2 in. (65 mm) FP 2000 WP 3000 WP 5000 WP

3 in. (80 mm) FP & 4 in. (100 mm) RP 2000 WP 3000 WP 5000 WP

n n

n n

1 2 4 6 7 8 9 10 11 12 16

1 1 1 1 1 1 1 1 1 1 1 1 1 1

18 19
20

J001877-0XX J001877-0XX J001878-0XX J001878-0XX J001878-0XX Inserts: -001 Ductile Iron ASTM A395 or Steel AISI C1040 -008 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon 22 1 Pin, Lock Handle Steel J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732 23 2 Bonnet Stud ASTM A193 Grade B7 J002066 J002066 J002066 J002066 J002066 J002066 24 2 Bonnet Stud Nut ASTM A194 Grade 2h 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 25 4 Body Stud ASTM A193 Grade B7 J002072 J002074 J002074 J002072 J002074 J002076 26 4 Body Stud Nut ASTM A194 Grade 2h 2709000-09-01 2709000-10-01 2709000-10-01 2709000-09-01 2709000-10-01 2709000-13-01 n Major Repair Kit J025091-10321 - One Each For One Years Service. Minor Repair Kit J025091-00321.
n

21

2 1/2 & 3 Full Port - Threaded - Weld - Grooved - Flanged 4 in. Reduced Port - Weld Steel Lube Fitting ASTM A536 Ductile Iron Hub Assembly AISI C1213 Lock Handle AISI C1213 Stem Screw Buna-N Stem Screw Seal Carbon Steel Screw Housing 303 SS - 002, 316 SS -008 Stem Buna-N Secondary Seal AISI C1213 Retainer Stem Seal Assembly Buna-N -001, Viton -006 Bonnet Cast Steel ASTM A487 4A or 2B Coatings Buna-N Bonnet Seal Viton Gate Materials Body Materials: ASTM A487 Grade 4 Class A or Grade 2 Class B Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly Materials

J001042 J001043 J001045 J001046 J001047 J001051 J001052 J001054 J001055 J001056 J011921 J011922 J001033 J001034 J001036 J001037 J001038 J001113 J001110 J005195 J005195 J005195 J005195 J005195 J005195 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01 J001892 J001892 J001892 J001892 J001892 J001892 J001914-002 J001914-002 J001914-002 J001914-003 J001914-003 J001914-003 J005526-226 J005526-226 J005526-226 J005526-226 J005526-226 J005526-226 J001852 J001852 J001852 J001852 J001852 J001852 J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX J005526-212 J005526-212 J005526-212 J005526-212 J005526-212 J005526-212 J001941 J001941 J001941 J001941 J001941 J001941 J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001959-XXX J001970-XXX J001974-XXX J001974-XXX J001971-XXX J001976-XXX J001980-XXX Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 J005526-427 J005526-427 J005526-427 J005526-431 J005526-433 J005526-433 J005531-427 J005531-427 J005531-427 J005531-431 J005531-433 J005531-433 J001868-00X J001868-00X J001868-00X J001886-00X J001886-00X J001886-00X AISI 4140 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008 Consult Factory For Body Part Numbers J001877-0XX

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 27

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 2000 & 3000 psi WP 4 in. (100 mm) FUll PORT 5 in. (125 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
D 1 4

22

7 6 8

2 23 24

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
12

11 10 25 26

9 16 18

20 21 19 A

Dimensional Data & Weights


VALVE SIZE DIMENSION
A B C D E Threaded, Weld & Grooved Flanged - RTJ Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Threaded, Weld & Grooved Flanged - RTJ (Open) (Seat Bore)

4 in. (100 mm) FP 2000 WP - 4000 TEST


13.00 (330) 16.38 (416) 21.25 (540) 4.00 (102) 23.00 (584) 4.31 (109) 4.31 (109) 10.75 (274) 8 - 7/8 R-37

4 in. (100 mm) FP


13.00 (330) 16.38 (416) 21.25 (540) 4.00 (102) 23.00 (584) 4.56 (116) 4.56 (116) 11.50 (292) 8 - 1 1/8 R-37

5 in. x 4 in. (125 mm x 100 mm) RP


13.00 (330) 21.25 (540) 4.00 (102) 23.00 (584) 4.56 (116) -

3000 WP - 6000 TEST

WEIGHT lb. (kg)


Threaded, Weld & Grooved Flanged 140 (64) 200 (91) CT-DEM-GATE-01 10/10 SWP-5M 162 (73) 265 (120) 162 (73)

28 DEMCO

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. VALVE SIZE Qty. DESCRIPTION
Assembly 4 in. Full Port - Threaded - Weld - Grooved - Flanged 5 in. Reduced Port - Weld Steel ASTM A536 Ductile Iron C-1213 C-1213 Buna-N Carbon Steel 303 SS -002, 316 SS -008 Buna-N C-1213 Buna-N -001, Viton -006 Cast Steel ASTM A487 4A or 2B Coatings Buna-N Viton
n

4 in. (100 mm) FP** 2000 WP

4 in. (100 mm) FP & 5 in. (125 mm) RP 3000 WP

n n

n n

1 2 4 6 7 8 9 10 11 12 16 18 19

1 1 1 1 1 1 1 1 1 1 1 1 1

lube Fitting hub Assembly lock handle Stem Screw Stem Screw Seal Screw housing Stem Secondary Seal Retainer Stem Seal Assembly Bonnet Bonnet Seal Gate

J001048 J001049 J001057 J001058 J011923 J001039 J001040 J001111 J005195 J005195 2139714-01 2139714-01 J001897 J001897 J001915 J001915 J005526-227 J005526-227 J001958 J001958 J001933-XXX J001933-XXX J005526-214 J005526-214 J001942 J001942 J001951-XXX J001951-XXX J001972-XXX J001977-XXX Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 J005526-438 J005526-439 J005531-438 J001926-00X J005531-439 J001926-00X

Materials 20 1 Body Materials: ASTM A487 Grade 4 Class A or Grade 2 Class B Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly Material

AISI 4140 Nickel Plated -002 Cast SS ASTM A351 Grade CF8M Annealed -008 Consult Factory For Body Part Numbers J002207-0XX J002207-0XX

21

22 1 Pin, lock handle Steel 23 2 Bonnet Stud ASTM A193 Grade B7 24 2 Bonnet Stud Nut ASTM A194 Grade 2h 25 4 Body Stud ASTM A193 Grade B7 26 4 Body Stud Nut ASTM A194 Grade 2h n Major Repair Kit J025091-10421 - One Each For One Years Service. Minor Repair Kit J025091-00421. *** Valves made prior to 1994 may use 7 Pitch Stud J002075 and Nut L053251-042. ** Available as 4 1/16 in. (103 mm) Casing Thread 2000 WP-J025020-4422110; 3000 WP-J024968-4422110.

Inserts: -02X Steel AISI 1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon J005420-18732 J005420-18732 J002072 J002072 2709000-09-01 2709000-09-01 J002074 ***J024500 2709000-10-01 ***2709000-12-01

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 29

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 5000 psi WP - 4 BOlT BONNET DESIGN 4 in. (100 mm) FUll PORT 5 in. (125 mm) & 6 in. (150 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
23.00 (584) DIA
4

6 2 5

7 1

8 23 24 16 25 26

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER

13 10 11 12

24.56 (624)

14 18

4.00 (102) 4.56 (116)


20 21 19 A

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded & Weld Flanged - RTJ Flange O.D. Flange Bolts (QTY. -Size in.) Ring Number (RTJ) TURNS TO OPEN

4 in. (100 mm) FP 5000 WP - 7500 TEST


13.00 (330) 18.00 (457) 12.25 (311) 8 - 1 1/4 R-39 23

5 in. x 4 in. (125 mm x 100 mm) & 6 in. x 4 in. (150 mm x 100 mm) RP 5000 WP - 7500 TEST
13.00 (330) 23

WEIGHT lb. (kg)


Threaded & Weld Flanged 210 (95) 315 (142) 210 (95) -

30 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. VALVE SIZE Qty. DESCRIPTION
Assembly Base Number 4 in. Full Port 5 in. Reduced Port - Weld 6 in. Reduced Port - Weld Steel Lube Fitting ASTM A536 Ductile Iron Handle Clear Acrylic Tube ASTM A536 Ductile Iron Stem Cap Steel Key C-1213 Stem Screw Buna-N Stem Screw Seal C-1029 Screw Housing 303 SS -002, 316 SS -008 Stem Buna-N Secondary Seal C-1213 Retainer Buna-N Stem Seal Assembly Viton 90 Durometer Buna-N TEFlON/Phenolic Bearing 303 SS Downstop Ring Bonnet ASTM A487 Grade 4 Class C or Grade 2 Class B Coatings Buna-N Bonnet Seal Viton
n

4 in. (100 mm) FP

5 in. (125 mm) & 6 in. (150 mm) RP 5000 WP - 7500 TEST

n n n

n n n n

1 2 3 4 5 6 7 8 9 10 11 12

1 1 1 1 1 1 1 1 1 1 1 1

n n

13 14 16 18 19

2 1 1 1 1

J007420 J007420 J007421 J007421 J011928 J011928 J005195 J005195 2139481-01 2139481-01 J007459 J007459 J007411 J007411 J005305-10016 J005305-10016 J007416 J007416 J005526-226 J005526-226 J007418 J007418 J007439-XXX J007439-XXX J005526-214 J005526-214 J007413 J007413 J001951-001 J001951-001 J001951-006 J001951-006 J022093-001 J022093-001 J007426 J007426 J007417 J007417 J007419-XXX J007419-XXX Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 J005520-439 J005520-439 J005531-439 J001926-00X J005531-439 J001926-00X AISI 4140 Nickel Plated -002 ASTM A351 Grade CF8M -008 Consult Factory For Body Part Numbers J002207-0XX J002207-0XX

Gate Materials

20

21

Body Materials: ASTM A487 Grade 4 Class A or Grade 2 Class B Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly Materials

23 2 ASTM A193 Grade B7 Bonnet Stud 24 2 ASTM A194 Grade 2h Bonnet Stud Nut 25 4 ASTM A193 Grade B7 Body Stud 26 4 ASTM A194 Grade 2h Body Stud Nut n Major Repair Kit J025091-11421 - One Each For One Years Service. Minor Repair Kit J025091-01421.

Inserts: -02X Steel AISI 1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon, -0X9 90 Durometer Buna-N J002072 J002072 2709000-09-01 2709000-09-01 J002077 J002077 J001890 J001890

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 31

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 5000 psi WP - 12 BOlT BONNET DESIGN 4 in. (100 mm) FUll PORT 5 in. (125 mm) & 6 in. (150 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
23.00 (584) DIA
4

6 2 5

7 1

8 23 24

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING

13 16 10 11 12 26 25

24.62 (625)

FLAT BOTTOM ADAPTER

18 14

4. (102) 4.69 (119)

20

21

19 A

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded & Weld Flanged - RTJ Flange O. D. Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) TURNS TO OPEN

4 in. (100 mm) FP 5000 WP - 7500 TEST


13.00 (330) 18.00 (457) 12.25 (311) 8 - 1 1/4 R-39 23 210 (95) 330 (150)

5 in. x 4 in. (125 mm x 100 mm) & 6 in. x 4 in. (150 mm x 100 mm) RP 5000 WP - 7500 TEST
13.00 (330) 23 210 (95) 330 (150)

WEIGHT lb. (kg)


Threaded & Weld Flanged

32 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. VALVE SIZE Qty. DESCRIPTION
Assembly Base Number 4 in. Full Port 5 in. Reduced Port - Weld 6 in. Reduced Port - Weld Steel ASTM A536 Ductile Iron Clear Acrylic ASTM A536 Ductile Iron Steel C-1213 Buna-N C-1029 303 SS -002, 316 SS -008 Buna-N C-1213 Buna-N Viton 90 Durometer Buna-N TEFlON/Phenolic 303 SS ASTM A487 Grade 4 Class C Coatings Buna-N Viton
n

4 in. (100 mm) FP

5 in. (125 mm) & 6 in. (150 mm) RP 5000 WP - 7500 TEST

n n

n n n n

1 2 3 4 5 6 7 8 9 10 11 12

1 1 1 1 1 1 1 1 1 1 1 1

Lube Fitting Handle Tube Stem Cap Key Stem Screw Stem Screw Seal Screw Housing Stem Secondary Seal Retainer Stem Seal Assembly

n n

13 14 16 18 19

2 1 1 1 1

Bearing Downstop Ring Bonnet Bonnet Seal Gate

J017263 J017263 J017264 J017264 J017265 J017265 J005195 J005195 2139481-01 2139481-01 J007459 J007459 J007411 J007411 J005305-10016 J005305-10016 J007416 J007416 J005526-226 J005526-226 J007418 J007418 J007439-XXX J007439-XXX J005526-214 J005526-214 J007413 J007413 J001951-001 J001951-001 J001951-006 J001951-006 J022093-001 J022093-001 J007426 J007426 J007417 J007417 J017289-XXX J017289-XXX Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 J005520-361 J005520-361 J005531-361 J001926-00X J005531-361 J001926-00X AISI 4140 Nickel Plated -002 ASTM A351 Grade CF8M Annealed -008 Consult Factory For Body Part Numbers J002207-0XX J002207-0XX

Materials 20 1 Body Materials: ASTM A487 Grade 4 Class A Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly Materials

21

23 2 ASTM A193 Grade B7 Bonnet Stud 24 2 ASTM A194 Grade 2h Bonnet Stud Nut 25 12 Body Stud ASTM A193 Grade B7 26 12 Body Stud Nut ASTM A194 Grade 2h n Major Repair Kit J025091-11421 - One Each For One Years Service. Minor Repair Kit J025091-01421.

Inserts: -02X Steel AISI 1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon, -0X9 90 Durometer Buna-N J002072 J002072 2709000-09-01 2709000-09-01 J015432 J015432 2709000-10-01 2709000-10-01

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 33

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - 3000 & 5000 psi WP 5 1/8 in. (130 mm) FUll PORT 6 in. (150 mm) x 5 1/8 in. (130 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
24.00 (610) DIA

24

23 1 2

14 25 26

22 19

24.56 (624)

BRONZE BUSHING FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING

18 3 20 5

21 7

8 9

FLAT BOTTOM ADAPTER

10 4

4.00 (102)

11

12

13 A

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded & Weld

5 1/8 in. (130 mm) FP & 6 in. x 5 1/8 in. (150 mm x 130 mm) RP 3000 & 5000 WP - 6000 & 7500 TEST
16.00 (406)

WEIGHT lb. (kg)

335 (152)
CT-DEM-GATE-01 10/10 SWP-5M

34 DEMCO

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
VALVE SIZE Key No. Qty. DESCRIPTION
Assembly Base Number 1 2 3 4 * 5 6 7 8 9 * 10 11 1 1 4 1 1 1 1 12 12 1 1 Handwheel Screw - Handwheel Screw - Retainer Downstop Ring Stem Seal Assembly w/Bushing Stem Bonnet Body Stud Body Stud Nut Bonnet Seal Body Materials: ASTM A487 Grade 4 Class A Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Assembly J021948-011 J021948-012 J021948-081 J021948-082 Materials * 13 14 18 19 20 21 22 23 24 25 26 1 1 1 1 1 1 4 1 1 1 1 Gate Stem Screw Seal -002 Steel AISI 4140 Nickel Plated, 008 316 SS (3000 WP Only) Buna-N

5 1/8 in. (130 mm) FP 3000 WP - 6000 TEST


J021954 -

RATING
Full Port - Threaded Reduced Port - Weld Ductile Iron ASTM A536 Grade 65-45-12 Steel AISI C1018 Alloy Steel Steel AISI C1018 -001 Buna-N -006 Viton -002 303 SS -009 17-4 ph SS Cast Steel ASTM A487 Grade 4 Class C Coatings Steel ASTM A193 Grade B7 Steel ASTM A194 Grade 2h Buna-N Viton

6 in. (150 mm) x 5 1/8 in. (130 mm) RP 5 1/8 in. (130 mm) FP 5000 WP - 7500 TEST
J023925 J025086 2227656-01 J014832 J005665-32028 J021942 J015853-00X

J021943-00X J021944-03X

J021943-009

Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 J015432 2709000-10-01 J005526-367 J005531-367 Consult Factory For Body Part Numbers J021948-019 -

12

Inserts: -01X Steel AISI 1040, -08X 316 SS (3000 WP Only) Elastomers: -0X1 Buna-N, -0X2 Viton, -0X9 90 Duro Buna-N J021952-00X J005526-228 J023888 J015332 J005526-216 J015330 J005650-32056 J012852 J015855 J005195 J051971 J024526 J021952-002

Stem Screw w/Bearings Steel AISI C1018, Steel Bearings AL. BRZ. ASTM B148 Alloy 955, Steel Bearings Steel AISI C1018 Housing Secondary Seal Retainer Screw - Housing Tube Stem Cap Lube Fitting Relief Fitting Buna-N Steel AISI C1018 Steel Clear Acrylic Ductile Iron ASTM A536 Grade 65-45-12 Steel Steel

* Recommended Spare Parts - One Each For One Years Service. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 35

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - ASME ClASS 400 & 600 1 1/2 in. & 2 in. (40 mm & 50 mm) FUll PORT 2 in. (50 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
D

2 4 5 3

1 6 7 12 10 8 B

F C

11

13 A

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Full Port - Threaded, Weld, Grooved Reduced Port - Threaded Flanged - RF Flanged - RTJ (Open) - Full Port (Open) - Reduced Port (Seat Bore) - Full Port (Seat Bore) - Reduced Port Full Port Reduced Port Full Port Reduced Port Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Full Port - Threaded, Weld, Grooved Reduced Port - Threaded Full Port - Flanged Reduced Port - Flanged

ASME CLASS

1 1/2 in. (40 mm) FP 2 in. x 1 1/2 in. (50 mm x 40 mm) RP 600
7.75 (197) 7.75 (197) 1.62 (41) 9.50 (241) 2.00 (50) 20 (9) -

2 in. (50 mm) FP 400


8.88 (226) 11.50 (292) 11.62 (295) 8.75 (222) 2.00 (50) 11.00 (279) 2.19 (56) 6.50 (165) 8 - 5/8 R-23 24 (11) 42 (19) -

2 in. (50 mm) FP 600


8.88 (226) 7.75 (197) 11.50 (292) 11.62 (295) 8.75 (222) 7.75 (197) 2.00 (50) 1.62 (41) 11.00 (279) 9.50 (241) 2.19 (56) 2.00 (50) 6.50 (165) 8 - 5/8 R-23 26 (12) 20 (9) 44 (20) 40 (18)

B C D E F

WEIGHT lb. (kg)

36 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
VALVE SIZE Key No. 1 1/2 in. (40 mm) FP 2 in. x 1 1/2 in. RP (50 mm x 40 mm) RP 600
J003938 J003939 J004375 J005445-25020 J005195 J005532-115 J005526-115 J005531-115 J004376-XXX -

2 in. (50 mm) FP

2 in. (50 mm) FP

Qty. DESCRIPTION
Assembly Base Part Number

ASME CLASS
FP - Threaded Weld Grooved Flanged RP - Threaded

400
J001071 J001091 J001081 J001061 J001276 J005445-37528 J005195 J005532-211 J005526-211 J005531-211 J001279-XXX J001277-01X

600
J001072 J001092 J001082 J001062 J001276 J005445-37528 J005195 J005532-211 J005526-211 J005531-211 J001279-XXX -

1 2 3 4 5 6 7

1 1 1 1 1 1 1

Handle Stem Pin Lube Fitting Back-Up Ring Stem Seal Stem Bonnet

Ductile Iron ASTM A536 Grade 65-45-12 Spring Steel Steel Chrome leather Buna-N Viton 303 SS -002, 316 SS -008 Ductile Iron ASTM A395 Steel ASTM A216 Grade WCB Coatings

J004330-02X J001277-02X Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12, -0X5 J005651-32024 J005526-234 J005531-234 J005651-32024 J005526-239 J005531-239 J005651-32024 J005526-239 J005531-239

8 10 11

4 1 1

Body Screw Bonnet Seal Body Materials:

SAE Grade 5 Buna-N Viton

2 in. (50 mm) Full Class 400 Threaded, Grooved and Flanged: Ductile Iron ASTM A395 2 in. (50) Full Class 600 Threaded, Weld, and Grooved: Forged Steel AISI C1029 Normalized All Others: Steel, ASTM A216 Grade WCB Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 12 1 Seat Materials J004081-0XX J001876-0XX J001876-0XX Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040 -08X Stainless Steel ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon 13 1 Gate Materials: -002 Steel, Nickel Plated -008 Stainless Steel J004393-00X AISI C1144 AISI 316 Annealed J001275-00X J001275-00X AISI C1045 AISI C1045 ASTM A351 CF8M Annealed CT-DEM-GATE-01 10/10 SWP-5M Consult Factory For Body Part Numbers

DEMCO 37

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES - ASME ClASS 400 & 600 2 1/2 in. (65 mm) ThROUGh 6 in. (150 mm) FUll PORT 8 in. (200 mm) REDUCED PORT FOR GENERAl SERVICE CONDITIONS
D

2 4 5 3

1 6 7 12 10 8 B

F C

11

13 A

Dimensional Data & Weights


DIMENSION
A

VALVE SIZE in. (mm) 2 1/2 (65) FP ASME CLASS 400 & 600
10.00 (254) 13.00 (330) 13.12 (333) 10.62 (270) 2.50 (64) 12.62 (321) 2.75 (70) 7.50 (191) 8 - 3/4 R-26 48 (22) 50 (23) 70 (32) 74 (34) -

3 (80) FP 400 & 600


10.25 (260) 14.00 (356) 14.12 (359) 11.38 (290) 3.00 (76) 12.62 (321) 3.19 (81) 8.25 (210) 8 - 3/4 R-31 58 (26) 60 (27) 90 (41) 96 (44) -

4 (100) FP 400 600


11.88 (302) 13.88 (353) 4.00 (102) 14.25 (362) 3.94 (100) 93 (42) 11.88 (302) 17.00 (432) 17.12 (435) 13.88 (353) 4.00 (102) 14.25 (362) 3.94 (100) 10.75 (274) 8 - 5/8 R-37 98 (44) 176 (80) -

6 (150) FP 400 600


15.50 (394) 19.50 (495) 19.62 (498) 19.25 (489) 6.00 (152) 24.00 (610) 5.62 (143) 12.50 (318) 12 - 7/8 R-45 300 (136) 411 (186) 15.50 (394) 22.00 (559) 22.12 (562) 19.25 (489) 6.00 (152) 24.00 (610) 5.62 (143) 14.00 (356) 12 - 1 R-45 310 (141) 428 (194) -

8 x 6 (200 x 150) RP 600


26.00 (660) 26.12 (663) 19.25 (489) 6.00 (152) 24.00 (610) 5.62 (143) 16.50 (419) 12 - 1 1/8 R-49 590 (268)

B C D E F

Threaded, Weld, Grooved Flanged - RF Flanged - RTJ (Open) - Full Port (Open) - Reduced Port (Seat Bore) - Full Port (Seat Bore) - Reduced Port Full Port Reduced Port Full Port Reduced Port Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) FP - Threaded, Weld, Grooved FP - Flanged RP - Flanged

WEIGHT lb. (kg)

38 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
VALVE SIZE in. (mm) Key No. Qty. DESCRIPTION
Assembly Base Part Number

2 1/2 (65) FP 400 600

3 (80) FP 400 600

4 (100) FP 400 600

ASME CLASS

6 (150) FP 8 (200) RP 400 600

1 2 3 4 5 6 7

1 1 1 1 1 1 1

8 9 10 11

4 4 1 1

12

FP - Threaded - Weld - Grooved - Flanged RP - Flanged Handle Ductile Iron ASTM A536 Grade 65-45-12 Spring Steel Stem Pin Steel Lube Fitting Chrome leather Back-Up Ring Buna-N Stem Seal Viton Stem 303 SS -002, 316 SS -008 Bonnet ASTM A395 Ductile Iron ASTM A216 Grade WCB Coatings Body Stud ASTM A193 Grade B7 Body Stud Nut ASTM A194 Grade 2h Buna-N Bonnet Seal Viton Body Materials: Class 400 3 in. (80 mm) Full Port through 6 in. (150 mm) Full Port Threaded, Grooved and Flanged: Ductile Iron ASTM A395 All Others: Steel, ASTM A216 Grade WCB Coatings (Except Weld End Bodies): DEMCO 10, DEMCO 11, DEMCO 12 Seat Materials

J001073 J001074 J001075 J001076 J001077 J001078 J001079 J001080 J001093 J001094 J001095 J001096 J001097 J001098 J001099 J001100 J001083 J001084 J001085 J001086 J001087 J001088 J001089 J001090 J001063 J001064 J001065 J001066 J001068 J001069 J001070 J003945 J001290 J001290 J001849 J001850 J005445-37528 J005445-37528 J005445-37532 J005445-37532 J005195 J005195 J005195 J005195 J005532-212 J005532-212 J005532-214 J005532-214 J005526-212 J005526-212 J005526-214 J005526-214 J005531-212 J005531-212 J005531-214 J005531-214 J001291-XXX J001291-XXX J001853-XXX J001854-XXX J001856-01X J001857-01X J001858-01X J001293-02X J001856-02X J001857-02X J001858-02X Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12 -0X5 J002066 J001861 J001862 J001863 2709000-08-01 2709000-09-01 2709000-10-01 2709000-14-01 J005526-245 J005526-249 J005526-258 J005526-446 J005531-245 J005531-249 J005531-258 J005531-446

Consult Factory For Body Part Numbers

J001877-0XX

13

Gate Materials

J001878-0XX J002207-0XX J001880-0XX Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040 2 1/2 in., 3 in., 6 in. -02X Steel AISI 1040 4 in. -08X Stainless Steel ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon J001881-00X J001882-00X J001883-00X J001884-00X -002 Steel AISI 1045, Nickel Plated, -008 316 SS Annealed

Available as 4 1/16 in. (103 mm) Casing Thread ASME CLASS 400-J024969-4422110.
CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 39

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASME ClASS 900, 2 in. (50 mm) ThROUGh 6 in. (150 mm) FUll PORT ASME ClASS 1500, 2 in. (50 mm) ThROUGh 3 in. (80 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

4 5

3 15

6 14

8 9

7 10

11 12 13

Dimensional Data & Weights


VALVE SIZE 2 in. (50 mm) FP 2 1/2 in. (65 mm) FP DIMENSION
A Flanged - RF Flanged - RTJ B C D F Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Open Seat Bore

3 in. (80 mm) FP 900


11.00 (279) 15.00 (381) 15.12 (384) 12.75 (324) 3.00 (76) 19.00 (483) 9.50 (241) 8 - 7/8 R-31

4 in. (100 mm) FP 6 in. (150 mm) FP 900


13.00 (330) 18.00 (457) 18.12 (460) 15.00 (381) 4.00 (102) 19.00 (483) 11.50 (292) 8 - 1 1/8 R-37

ASME CLASS

1500
14.50 (368) 14.62 (371) 9.88 (251) 2.00 (51) 14.50 (368) 8.50 (216) 8 - 7/8 R-24

900 & 1500


9.75 (248) 16.50 (419) 16.62 (422) 22.88 (581) 2.50 (64) 19.00 (483) 9.62 (244) 8-1 R-27

1500
11.00 (279) 18.50 (470) 18.62 (473) 12.75 (324) 3.00 (76) 19.00 (483) 10.50 (267) 8 - 1 1/8 R-35

900
20.00 (508) 24.00 (610) 24.12 (613) 19.25 (489) 6.00 (152) 19.00 (483) 15.00 (381) 12 - 1 1/8 R-45

Threaded, Weld, Grooved N/A*

WEIGHT lb. (kg)


Threaded, Weld, Grooved N/A* Flanged 48 (22) 100 (45) 87 (39) 170 (77) 95 (43) 160 (73) 113 (51) 205 (93) 140 (64) 230 (104) 325 (147) 540 (245)

* Refer to 2000, 3000, 5000 Threaded, Weld and Grooved end on pages 24 and 25.

40 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
FP Key No. Qty. DESCRIPTION
Assembly Base Part Number 1 2 3 4 * 5 6 7 8 9 * 10 11 * 12 1 1 1 1 1 1 1 4 4 1 1 1 Handle Stem Pin Lube Fitting Back-Up Ring Stem Seal Stem Bonnet Body Stud Body Stud Nut Bonnet Seal Body materials: ASTM A487 Grade 4 Class A or Grade 2 Class B Seat Assembly Materials J001876-0XX J001877-0XX Buna-N Viton Ductile Iron ASTM A536 Grade 65-45-12 Steel Chrome leather Buna-N Viton 303 SS -002, 316 SS -008 ASTM A487 Grade 4 Class A Coatings J002072 ASTM A194 Grade 2h 2709000-09-01 J005526-342 J005531-342

FP 1500 900 1500 900


J003953

FP 3 in. (80 mm) 1500


J003957

FP 900
J003955 J023663 J005195 J005532-214 J005526-214 J005531-214 J004397-00X J004328-03X J002074 27090000-10-01 J005526-438 J005531-438

FP 1500
J003999 J001850

VALVE SIZE 2 in. (50 mm) 2 1/2 in. (65 mm) ASME CLASS 900
J003947 J003948 J003951 J003952 J023661 J005195 J005532-211 J005526-211 J005531-211 J004395-XXX J004320-03X J0018195 J005445-37528 J005195 J005532-212 J005526-212 J005531-212 J004396-XXX J004322-03X J002074 2709000-10-01 J005526-427 J005531-427 Spring Steel J005445-37528

4 in. (100 mm) 6 in. (150 mm)

J0018195 J005445-37528 J005195 J005532-212 J005526-212 J005531-212 J004396-XXX J004324-03X J004326-03X J002072 J002074

J005445-37532

J001854-00X J001780-03X J002077 J001890 J005526-446 J005531-446

Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035 2709000-09-01 J005526-431 J005526-433 J005531-431 J005531-433 Consult Factory For Body Part Numbers J001878-0XX J002207-0XX J001880-0XX Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon

* 13

Gate Materials

J001275-XXX

J001881-XXX

J001882-00X

J001883-00X

J001884-00X

-002 Nickel Plated Steel AISI 4145 -008 316 SS Wrought Type - 2 in. (50 mm) Only ASTM A351 CF8M - Others J005526-222 J005197 J005526-234 J005197 J005526-224 J005197 J005526-226 J005197 -

14 15

1 1

Screw Seal Relief Fitting

Buna-N Steel

* Recommended spare parts - one each for one years service. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 41

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASME ClASS 1500 4 in. (100 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
23.00 (584) DIA
3 16

22 14 18 19

23 24

BRONZE BUSHING
21

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
10 6 7

20 5

8 9

21.25 (540)

4.00 (102)

4.56 (116)

11

12

13 A

Dimensional Data & Weights


DIMENSION
A Threaded & Weld Flanged - RF Flanged - RTJ Flange O. D. Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ)

VALVE SIZE ASME CLASS

4 in. (100 mm) FP 1500


13.00 (330) 21.50 (546) 21.62 (449) 12.25 (311) 8 - 1 1/4 R-39 162 (73) 320 (145)

WEIGHT lb. (kg)


Threaded & Weld Flanged

42 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DM GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No.
1 3 * 5 6 7 8 9 * 10 11 * 12

VALVE SIZE Qty. DESCRIPTION


Assembly Base Part Number 1 1 1 1 1 4 4 1 1 1 Handle Assembly Lube Fitting Stem Seal Assembly Stem Bonnet Body Stud Body Stud Nut Bonnet Seal Body Materials: ASTM A487 Grade 4 Class A or Grade 2 Class B Seat Materials Ductile Iron ASTM A536 Grade 65-45-12 Steel Buna-N Viton 303 SS -002, 316 SS -008 ASTM A487 Grade 4 Class A or Class B ASTM A193 Grade B7 ASTM A194 Grade 2h Buna-N Viton

4 in. (100 mm) FP 1500


J003010 2139714-01 J005195 J001951-001 J001951-006 J001933-XXX J001977-XXX **J0024500 **2709000-12-01 J005526-439 J005531-439 Consult Factory For Body Part Numbers J002207-0XX Inserts: - 02X Steel AISI 1040 -08X 316 SS ASTM A351 Grade CF8M Annealed Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 hypalon

ASME CLASS

Coatings Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035

13

Gate Materials

J001926-XXX -002 AISI 4140 Nickel Plated -008 ASTM A351 Grade CF8M J005526-227 J001897 J001915 J001958 J005526-214 J001942 J005420-18732 J002072 2709000-09-01

14 16 18 19 * 20 21 22 23 24

1 1 1 1 1 1 1 2 2

Screw Seal Lock Handle Stem Screw Screw Housing Secondary Seal Retainer Pin, Lock Handle Bonnet Stud Body Stud Nut

Buna-N AISI C1213 AISI C1213 AISI 1029 Buna-N AISI C1213 Steel ASTM A193 Grade B7 ASTM A194 Grade 2h

* Recommended Spare Parts - One Each For One Years Service. ** Valves made prior to 1994 may use 7 Pitch Stud J002075 and Nut J053251-042. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 43

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASME ClASS 600, 900 & 1500 2 in. (50 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

Seat Spring Seat Seal P-10 Insert

40

130

120

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
50 60 180 21 110 90 20 70 100 160 10

(Open)

SEAT ASSEMBLY DETAIL P-10 SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY

Seat Seal

E 50

SEE SEAT DETAIL

30

SEAT ASSEMBLY DETAIL PC BUNA, VITON, HNBR SEAT SEAL PART OF SEAT ASSEMBLY
2 in. (50 mm) FP 600
11.50 (292) 11.62 (295) 14.63 (372) 2.06 (52) 14.50 (368) 5.00 (127) 6.50 (165) 8 - 5/8 R-23 48 (22)

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded Flanged - RF Flanged - RTJ (Open) (Seat Bore)

ASME CLASS

900
8.50 (216) 14.50 (368) 14.62 (371) 14.63 (372) 2.06 (52) 14.50 (368) 5.25 (133) 8.50 (216) 8 - 7/8 R-24 44 (20) 82 (37)

1500
8.50 (216) 14.50 (368) 14.62 (371) 14.63 (372) 2.06 (52) 14.50 (368) 5.25 (133) 8.50 (216) 8 - 7/8 R-24 44 (20) 82 (37)

B C D E F

Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Threaded Flanged

WEIGHT lb. (kg)

Working Pressure (psi)


END CONNECTION
Threaded Flanged

Material
Bronze Stainless Steel Bronze Stainless Steel

ASME CLASS

600
1480 1440

900
2220 2220 2220 2160

1500
3705 3705 3705 3600

44 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No.
10 20 21 30 40 50

VALVE SIZE Qty. DESCRIPTION


1 1 1 1 1 2

2 in. (50 mm) FP 600


J024726

ASME CLASS

900
J024727

1500
J024753

MATERIAL SPECIFICATION (SEE NOTE 1.)


Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M Bronze ASTM B505 Alloy 93200 Stainless Steel CF8M 316 SS Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro Ring: CF8M: Elastomer: Viton, 75 Duro Ring: CF8M; Elastomer: hNBR, Peroxide Cured, 80 Duro Ring: CF8M; Insert: PEEK; Seal: Buna-N Peroxide Cured, 90 Duro; Spring: Inconel X-750 Ring: CF8M; Insert: PEEK; Seal: hNBR, 90 Duro Spring: Inconel X-750 Ring: CF8M; Insert PEEK; Seal: hytrel/Elgiloy; Spring: Inconel X-750 Ductile Iron ASTM A536 Grade 65-45-12 316 SS Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro hNBR, 90 Duro TEFlON/Elgiloy Ph 15-7 Mo Alloy Steel Steel Steel Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro hNBR,90 Duro TEFlON/Elgiloy Buna-N

Assembly Base Part Number Body Bonnet Stem Bushing (f/SS Bonnet) Gate (See Note 2.) Stem Seat Assembly (See Note 2.)

Consult Factory For Body Part Numbers 2060241-01 2060241-02 1, 2, 5 4, 6, 7 1 2 5 6 7 4 J024323-060 J024660-080 J024661-060 J024558-008 J024559-008 J024089-008 2061588-01 2061589-01 2227057-01 2061590-01 2227058-01 2061587-01 2139937-01 J024324-008 J024757-117 J024757-116 J024757-119 J024882-601 J090066-162 J056731-32024 J056731-34032 J005195 J005197 J005520-234 J005521-234 2712425-37 J0055411-23411 J005526-219

60 70 90

1 1 1

Handle Stem Packing Retainer Stem Seal Assembly (See Note 2.)

1, 6 2 5, 7 4

100 110 120 130 160

1 4 1 1 1

Retainer Snap Ring Cap Screw Lube Fitting Relief Fitting Bonnet Seal (See Note 2.)

1, 6 2 5, 7 4

180

Handle Seal

Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed. 2. These Parts are Keyed to the Assembly Part Number Seat Insert/Seal Code Numbers Indicated. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 45

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASME ClASS 600, 900 & 1500 2 1/2 in. (65 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

Seat Spring Seat Seal P-10 Insert

40

130

120

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
50 60 180 21 110 90 20 70 100 160 10

(Open)

SEAT ASSEMBLY DETAIL P-10 SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY

Seat Seal

E 50

SEE SEAT DETAIL

30

SEAT ASSEMBLY DETAIL PC BUNA, VITON, HNBR SEAT SEAL PART OF SEAT ASSEMBLY
2 1/2 in. (65 mm) FP 600
13.00 (330) 13.12 (333) 16.71 (424) 2.56 (65) 14.75 (375) 6.12 (155) 7.50 (191) 8 - 3/4 R-26 77 (35)

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded Flanged - RF Flanged - RTJ (Open) (Seat Bore)

ASME CLASS

900
8.75 (222) 16.50 (419) 16.62 (422) 16.71 (424) 2.56 (65) 14.75 (375) 6.38 (162) 9.62 (244) 8-1 R-27 57 (26) 110 (50)

1500
8.75 (222) 16.50 (419) 16.62 (422) 16.71 (424) 2.56 (65) 14.75 (375) 6.38 (162) 9.62 (244) 8-1 R-27 57 (26) 110 (50)

B C D E F

Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Threaded Flanged

WEIGHT lb. (kg)

Working Pressure (psi)


END CONNECTION
Threaded Flanged

Material
Bronze Stainless Steel Bronze Stainless Steel

ASME CLASS

600
1480 1440

900
2220 2220 2220 2160

1500
3705 3705 3705 3600

46 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
Assembly Base Part Number 10 20 21 30 40 50 1 1 1 1 1 2 Body Bonnet Stem Bushing (f/SS Bonnet) Gate (See Note 2.) Stem Seat Assembly (See Note 2.) 1, 2 4, 6 f/Aluminum Bronze Valve f/Stainless Steel Valve 1 2 6 4 60 70 90 1 1 1 Handle Stem Packing Retainer Stem Seal Assembly (See Note 2.) 100 110 120 130 160 1 4 1 1 1 Retainer Snap Ring Cap Screw Lube Fitting Relief Fitting Bonnet Seal (See Note 2.) 180 1 Handle Seal 1, 6 2 4 J056731-32028 1, 6 2 4 2060256-02

VALVE SIZE ASME CLASS 600


J024728 J024728

2 1/2 in. (65 mm) FP 900


J024729 J025062

1500
J024754 J025063

MATERIAL SPECIFICATION (SEE NOTE 1.)


Aluminum Bronze Stainless Steel Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M Bronze ASTM B150 Alloy C63000 Stainless Steel CF8M 316 SS Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro Ring: CF8M: Elastomer: Viton, 75 Duro Ring: CF8M; Insert: PEEK; Seal: Buna-N Peroxide Cured, 90 Duro; Spring: Inconel X-750 Ring: CF8M; Insert PEEK; Seal: hytrel/Elgiloy; Spring: Inconel X-750 Ductile Iron ASTM A536 Grade 65-45-12 316 SS Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Ph 15-7 Mo Alloy Steel Steel Steel Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Buna-N

Consult Factory For Body Part Numbers J024608-060 J024609-080 J024583-060 J024677-080 J024676-060 2060265-01 2060266-01 2060256-02 2061921-01 2061588-02 2061589-02 2061590-02 2061587-02 2139930-01 2060259-08 J024757-217 J024757-216 J024882-603 J090066-162 J056731-36036 J005195 J005197 J005520-239 J005521-239 J0055411-23911 J005526-221

Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed. 2. These Parts are Keyed to the Assembly Part Number Seat Insert/Seal Code Numbers Indicated. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 47

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASME ClASS 600, 900 & 1500 3 in. (80 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

Seat Spring Seat Seal P-10 Insert

40

130

120

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
50 60 180 21 110 90 20 70 100 160 10

(Open)

SEAT ASSEMBLY DETAIL P-10 SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY

Seat Seal

E 50

SEE SEAT DETAIL

30

SEAT ASSEMBLY DETAIL PC BUNA, VITON, HNBR SEAT SEAL PART OF SEAT ASSEMBLY
3 in. (80 mm) FP 600
14.00 (356) 14.12 (359) 18.00 (457) 3.12 (79) 14.75 (375) 6.81 (173) 8.25 (210) 8 - 3/4 R-31 100 (45)

Dimensional Data & Weights


VALVE SIZE DIMENSION
A Threaded Flanged - RF Flanged - RTJ (Open) (Seat Bore)

ASME CLASS

900
9.69 (246) 15.00 (381) 15.12 (384) 18.00 (457) 3.12 (79) 14.75 (375) 6.94 (176) 9.50 (241) 8 - 7/8 R-31 75 (34) 125 (37)

1500
18.50 (470) 18.62 (373) 18.82 (478) 3.12 (79) 18.00 (457) 7.15 (182) 10.50 (257) 8 - 1 1/8 R-35 185 (84)

B C D E F

Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Threaded Flanged

WEIGHT lb. (kg)

Working Pressure (psi)


END CONNECTION
Threaded Flanged

Material
Bronze Stainless Steel Bronze Stainless Steel

ASME CLASS

600
1480 1440

900
2220 2220 2220 2160

1500
3705 3705 3705 3600

48 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
10 20 30 40 50 1 1 1 1 2 Body Bonnet Gate (See Note 2.) Stem Seat Assembly (See Note 2.) 1 2 6 4 60 70 90 1 1 1 handle Stem Packing Retainer Stem Seal Assembly (See Note 2.) 100 110 120 130 160 1 4 1 1 1 Retainer Snap Ring Cap Screw lube Fitting Relief Fitting Bonnet Seal (See Note 2.) 180 1 handle Seal 1, 6 2 4 1, 6 2 4 1, 2 4, 6

VALVE SIZE ASME CLASS

600
J024730

3 in. (80 mm) FP 900


J024731

1500
J024732

MATERIAL SPECIFICATION (SEE NOTE 1.)


Aluminum Bronze ASTM B148 Alloy 955 Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M 316 SS Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro Ring: CF8M: Elastomer: Viton, 75 Duro Ring: CF8M; Insert PEEK; Seal: Buna-N Peroxide Cured, 90 Duro Spring: Inconel X-750 Ring: CF8M; Insert PEEK; Seal: hytrel/Elgiloy; Spring: Inconel X-750

Assembly Base Part Number

Consult Factory For Body Part Numbers J024624-006 J024621-008 J024623-008 J024620-008 2061588-03 2061589-03 2061590-03 2061587-03 2139931-01 2060259-08 J024757-217 J024757-216 J024882-603 J090066-162 J056731-36036 J005195 J005197 J005520-244 J005521-244 J0055411-24411 J005526-221 2139932-01 J024642-006

Ductile Iron ASTM A536 Grade 65-45-12 316 SS Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Ph 15-7 Mo

J056731-38044 Alloy Steel Steel Steel Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Buna-N

Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed. 2. These Parts are Keyed to the Assembly Part Number Seat Insert/Seal Code Numbers Indicated. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 49

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASME ClASS 600, 900 & 1500 4 in. (100 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

Seat Spring Seat Seal P-10 Insert

40

130

120

FLAT TOP FOLLOWER FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER
50 60 180 21 110 90 20 70 100 160 10

(Open)

SEAT ASSEMBLY DETAIL P-10 SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY

Seat Seal

E 50

SEE SEAT DETAIL

30

SEAT ASSEMBLY DETAIL PC BUNA, VITON, HNBR SEAT SEAL PART OF SEAT ASSEMBLY

Dimensional Data & Weights


VALVE SIZE DIMENSION
A B C D E F Flanged - RF Flanged - RTJ (Open) (Seat Bore)

4 in. (100 mm) FP 600


17.00 (332) 17.12 (435) 22.25 (565) 4.06 (103) 23.00 (584) 9.00 (229) 10.75 (273) 8 - 7/8 R-37 170 (77)

ASME CLASS

900
18.00 (457) 18.12 (460) 22.25 (565) 4.06 (103) 23.00 (584) 9.12 (232) 11.50 (292) 8 - 1 1/8 R-37 215 (98)

1500
21.50 (546) 21.62 (549) 22.54 (573) 4.06 (103) 23.00 (584) 9.41 (239) 12.25 (311) 8 - 1 1/4 R-39 295 (134)

Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Flanged

WEIGHT lb. (kg)

Working Pressure (psi)


END CONNECTION
Flanged

Material
Bronze

ASME CLASS

600
1480

900
2220

1500
3705

50 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
10 20 30 40 50 1 1 1 1 2 Body Bonnet Gate (See Note 2.) Stem Seat Assembly (See Note 2.) 1 2 6 4 60 70 90 1 1 1 Handle Stem Packing Retainer Stem Seal Assembly (See Note 2.) 100 110 120 130 160 1 4 1 1 1 Retainer Snap Ring Cap Screw Lube Fitting Relief Fitting Bonnet Seal (See Note 2.) 180 1 Handle Seal 1, 6 2 4 J056512-34032 1, 6 2 4 1, 2 4, 6

VALVE SIZE ASME CLASS 600


J024733 J024711-006 Assembly Base Part Number

4 in. (100 mm) FP 900


J024734 J024712-006

1500
J024735

MATERIAL SPECIFICATION (SEE NOTE 1.)


Aluminum Bronze ASTM B148 Alloy 955 Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M 316 SS - 600 & 900 Only; XM-19 1500 Only Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro Ring: CF8M: Elastomer: Viton, 75 Duro Ring: CF8M; Insert: PEEK; Seal: Buna-N Peroxide Cured, 90 Duro; Spring: Inconel X-750 Ring: CF8M; Insert PEEK; Seal: hytrel/Elgiloy; Spring: Inconel X-750 Ductile Iron ASTM A536 Grade 65-45-12 316 SS Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Ph 15-7 Mo

Consult Factory For Body Part Numbers J024713-006 J024721-008 J024722-008 J024718-008 J024719-008 J024720-008 J024717-008 2061588-04 2061589-04 2061590-04 2061587-04 2139930-01 J024716-008 J024757-317 J024757-316 J024882-604 J090066-175 J056512-36036 J005195 J005197 J005520-254 J005521-254 J0055411-25411 J005526-223

J056512-41048 Alloy Steel Steel Steel Buna-N, Peroxide Cured, 90 Duro Viton, 90 Duro TEFlON/Elgiloy Buna-N

Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed. 2. These Parts are Keyed to the Assembly Part Number Seat Insert/Seal Code Numbers Indicated. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 51

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASME ClASS 900 6 in. (150 mm) FUll PORT FOR GENERAl SERVICE CONDITIONS
D

Seat Spring Seat Seal P-10 Insert

250

BRONZE BUSHING
130

260

60

FLAT TOP FOLLOWER


180 200 240 210 170 220 110 140 20 B

50

FABRIC REINFORCED SEAL RING HOMOGENEOUS RUBBER SEAL RING FLAT BOTTOM ADAPTER

120 130 230 90 40 190 160

SEAT ASSEMBLY DETAIL P-10 SEAT SPRING AND SEAL PART OF SEAT ASSEMBLY

Seat Seal

E 180

50

SEE SEAT DETAIL FOR STEM INSERT / SEAL CODE: 4

30 A

SEAT ASSEMBLY DETAIL PC BUNA, VITON, HNBR SEAT SEAL PART OF SEAT ASSEMBLY

Dimensional Data & Weights


VALVE SIZE DIMENSION
A B C D E F Flanged - RF Flanged - RTJ (Open) (Seat Bore)

6 (150) FP 900
24.00 (610) 24.12 (613) 33.85 (860) 6.06 (154) 24.00 (610) 12.38 (314) 15.00 (381) 12 - 1 1/8 R-45 Consult Factory

ASME CLASS

Flange OD Flange Bolts (QTY. - SIZE in.) Ring Number (RTJ) Flanged

WEIGHT lb. (kg)

Working Pressure (psi)


END CONNECTION
Flanged

Material
Bronze

ASME CLASS

900
2220

52 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

DEMCO GATE VALVES


SERIES DT GATE VAlVES ASSEMBly PART NUMBER

Parts list
Key No. Qty. DESCRIPTION
Assembly Base Part Number 10 20 30 40 50 1 1 1 1 2 Body Bonnet Gate (See Note 2.) Stem Seat Assembly (See Note 2.)

VALVE SIZE in. (mm) ASME CLASS


6 in. 8 x 6 in. 6 in. RF - AL BRZ RTJ - AL BRZ AL BRZ 1, 2, 5 4, 6, 7 1 2 5 6

6 (150) FP 900
J025141 2227657-00-56 2227657-00-46 2227661-06 2227658-08 2227964-08 2227666-08 2227655-00-81 Aluminum Bronze ASTM B148 Alloy 955 Aluminum Bronze ASTM B148 Alloy 955 Stainless Steel CF8M on 900, Duplex UNS S31803 on 1500

MATERIAL SPECIFICATION (SEE NOTE 1.)

316 SS on 900; ASTM A479 Grade XM-19 1500 Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro Ring: CF8M: Elastomer: Viton, 75 Duro Ring: CF8M: Elastomer: hNBR, Peroxide Cured, 80 Duro 2269616-01 Ring: CF8M; Insert: PEEK; Seal: Buna-N Peroxide Cured, 90 Duro; Spring: Inconel X-750 7 2227961-00-83 Ring: CF8M; Insert PEEK; Seal: hNBR, 90 Duro Spring: Inconel X-750 4 Ring: CF8M; Insert PEEK; Seal: hytrel/Elgiloy Spring: Inconel X-750 60 1 2227656-01 Ductile Iron ASTM A536 Grade 65-45-12 Handle 90 1 1, 6 J021706-001 Buna-N, Peroxide Cured, 90 Duro Stem Seal Assembly 2 J015853-008 Viton, 90 Duro (See Note 2.) 5, 7 hNBR, 90 Duro 4 TEFlON/Elgiloy 110 8 2171976-09-02 ASTM A193 Grade B7 Stud 120 1 J005195 Steel Lube Fitting 130 1 J051971 Steel Relief Fitting 140 8 2709000-09-01 ASTM A193 Grade 2h Nut 150 1 J014832 Steel AISI C1018 Screw - Handle 160 1 1, 6 J005520-367 Buna-N, Peroxide Cured, 90 Duro Bonnet Seal 2 J005521-367 Viton, 90 Duro (See Note 2.) 5, 7 2738507-15 hNBR, 90 Duro 4 TEFlON/Elgiloy 170 4 J005665-32028 Alloy Steel Screw - Retainer 180 1 J005526-228 Buna-N on 900; Urethane on 1500 Stem Screw Seal 190 1 J015848 316 SS Downstop Ring 200 1 J023888 Stem Screw with Steel AISI C1018 Stem Screw with Bearings Bearings: hardened Steel Needle Thrust Bearings 210 1 J015332 Steel AISI C1018 Housing 220 1 1, 6 J005526-216 Buna-N Secondary Seal 2 J005531-216 Viton (See Note 2) 4, 5, 7 2738507-09 hNBR 230 1 J015330 Steel AISI C1018 Retainer 240 4 J005650-32056 SAE Grade 2 Steel Screw - Housing 250 1 J019160 Clear Acrylic Tube 260 1 J019161 Ductil iron ASTM A536 Grade 65-45-12 Stem cap Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. XM-19 15 ASTM A479 Type XM-19 Hot Rolled. 2. These Parts are Keyed to the Assembly Part Number Seat Insert/Seal Code Numbers Indicated. CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 53

DISTRIBUTED VALVES

CAMSERV AFTERMARKET SERVICES


Camerons Aftermarket Services goal is to help our customers lower the total cost of valve ownership. To that end we offer a full range of services from over twenty-five Service Centers worldwide and can provide experienced personnel trained to meet the specific service requirements of each valve type.

Aftermarket Services
Supplies replacement valves and parts: Maintains a full inventory of new and reconditioned valves for immediate delivery Provides factory warranty support for all Cameron OEM brands as well as service for most other valves Field Service & Technical Support Field service technicians on call 24 hours a day 7 days a week to handle service issues wherever they arise Provides equipment installation, field repairs, as well as track and perform scheduled maintenance Customer Property Repair The Customer Property Repair program allows Cameron valve customers to store assets at our service centers throughout the world Valves tracked in electronic database accessible through the Internet Remanufactured Products Offers a broad range of API-compliant reconditioned equipment with fast delivery Total Valve Management Supply and service automation and control packages Assist with valve installation, commissioning and start-up

54 DEMCO

CT-DEM-GATE-01 10/10 SWP-5M

DISTRIBUTED VALVES

TRADEMARK INFORMATION
DEMCO is a registered trademark which is owned by Cameron. This document contains references to registered trademarks or product designations, which are not owned by Cameron.

Trademark
CELCON DELRIN FLUOREL HASTELLOY HYCAR HYDRIN HYPALON INCONEL MONEL NORDEL STELLITE TEFLON VITON ENDURO-BOND

Owner
Hoechst Celanese Corporation E.I. DuPont De Nemours & Company Minnesota Mining and Manufacturing Company Haynes International, Inc. Hydrocarbon Chemical and Rubber Company Zeon Chemicals USA, Inc. E.I. DuPont De Nemours & Company INCO Nickel Sales, Inc. INCO Alloys International, Inc. E.I. DuPont De Nemours & Company Stoody Deloro Stellite, Inc. E.I. DuPont De Nemours & Company E.I. DuPont De Nemours & Company Energy & Environmental Services, Inc.

CERTIFICATIONS

American Bereau of Shipping

Det Norske Veritas

CT-DEM-GATE-01 10/10 SWP-5M

DEMCO 55

DISTRIBUTED VALVES

VALVES & MEASUREMENT 3250 Briarpark Drive, Suite 300 Houston, TX 77042 USA Toll 800 323 9160
For the most current contact and location information go to: www.c-a-m.com

Cameron Printed in USA 10/10-SWP-5M CT-DEM-GATE-01

You might also like