Copyright

Copyright
Fujitsu Limited has made every effort to Other product names are trademarks or
ensure the accuracy and completeness of this registered trademarks of their respective
document. However, as ongoing development companies.
efforts are continually improving the capabilities
of our products, we cannot guarantee the Copyright© 2016 Fujitsu Limited. All rights
accuracy of the contents of this document. We reserved. No part of this publication may be
disclaim liability for errors, omissions or future copied, reproduced or translated, without the
changes. prior written consent of Fujistu Limited. No part
of this publication may be stored or transmitted
STYLISTIC is a trademark of Fujitsu Limited. in any electronic form without the written
consent of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, Windows
NT, Windows XP, Windows Vista, Windows 7 This device complies with Part 15 of the FCC
and Windows 8 and Windows 8.1 are registered rules. Opeartions are subject to the following
trademarks of the Microsoft Corporation of the two conditions:
United States in the United States and other
countries. (1) This device may not be allowed to cause
harmful interferance.
Phoenix is a registered trademark of Phoenix
Technologies Corporation of the United States. (2) This device must accpet any interference
recevied, inclusding interference that may
ExpressCard™ module technology is a cause indesired operation.
registered trademark of Personal Computer
Memory Card International Association. Website: http://hk.fujitsu/com/pc

Copyright© 1981-2016 Microsoft Corporation,

All rights reserved.

Copyright© 2016 Phoenix Technologies, Ltd.,

All rights reserved.

DECLARATION OF CONFORMITY
according to FCC Part 15

i
IMPORTANT SAFETY 9. If an extension cord is used with this product,
make sure that the total ampere rating of the
INSTRUCTIONS equipment plugged into the extension cord
does not exceed the extension cord ampere
1. Read these instructions carefully. Save these rating. Also make sure that the total rating of
all products pugged into the wall outlet does
instructions for future reference. not exceed 15 amperes.
2.
Follow all warnings and instructions marked 10. Never push objects of any kind into this
on the product. product through cabinet slots as they may
3. touch dangerous voltage points that could
Unplug this product from the wall outlet result in a fire or electric shock. Never spill
before cleaning. Do not use liquid cleaners liquid of any kind on the product.
or aerosol cleaners. Use a damp cloth for
cleaning. 11. Do not attempt to service this product
4. yourself, as opening or removing covers
Do not use this product near water. may expose you to dangerous voltage points
5. or other risks. Refer all servicing to qualified
Do not place this product on an unstable
cart, stand or table. The product may drop, service personnel.
causing serious damage to the product. 12. Unplug this product from the wall outlet and
6. refer servicing to qualified service personnel
Slots and openings in the cabinet and the under the following conditions:
back or bottom are provided for ventilation;
to ensure reliable operation of the product a. When the power cord or plug is damaged
and to protect it from overheating, these or frayed.
openings must not be blocked or covered. b. If liquid has been spilled into the product.
The openings should never be blocked by c. If the product has been exposed to rain or
placing the product on a bed, sofa, rug or water.
other similar surface. This product should
never be placed near or over a radiator d. If the product dose not operate normally
or heat register or in a built-in installation when the operating instructions are
unless proper ventilation is provided. followed. Adjust only those controls that
7. are covered by the operating instructions
This product should be operated from the since improper adjustment of other controls
type of power indicated on the marking may result in damage and will often require
label. If you are not sure of the type of power extensive work by a qualified technician to
available, consult your dealer or local power restore the product to normal condition.
company. e. If the product has been dropped or the
8.
Do not allow anything to rest on the power cabinet has been damaged.
cord. Do not locate this product where f. If the product exhibits a distinct change in
persons will walk on the cord.
performance, indicating a need for service.

ii
 Copyright

13. C A U T I O N : W h e n r e p l a c i n g t h e
battery, be sure to install it with the
polarities in the correct position.
There is a danger of explosion if the
battery is replaced with an incorrect
type or is mistreated. Do not
recharge, disassemble or dispose of
in fire. Replace only with the same
or equivalent type recommended
by the manufacturer. Dispose of
the used battery according to the
14. manufacturer’s instructions.
Use only the proper type of power cord
set(provided in the accessories box)
for this unit. It should be detachable
type and with respective certification.
Maximum length is 15 feet (4.6 meters).

iii
 among other information. If requested the user
must provide their telephone company with the
following information:
Changes or modifications not expressly
approved by Fujitsu could void this user’s 1. The telephone number to which the
authority to operate the equipment. Tablet PC is connected.
2. The Ringer Equivalence Number(REN)
for this equipment.
FCC NOTICES 3. That the equipment requires a standard
modualar jack type USOC RJ-11C which
Notice to Users of Radios and Television
is FCC Part 68 compliant.
These limits are designed to provide reasonable 4. The FCC Registration Number.
protection against harmful interference in
a residential installation. This equipment This equipment is designed to be connected
generate s, uses, and ca n r a d i a t e r a d i o to the telephone network or premises wiring
frequency energy and, if not installed and used using a standard modular jack type USOC
in accordance with the instructions, may cause RJ-11C which is FCC Part 68 68 compliant
and a line cord between the modem and the
harmful interference to radio communications.
telephone network with a minimum of 26AWG.
However, there is no guarantee that interference
will not occur in a particular installation. If this The REN is used to determine the number
equipment does cause harmful interference of devices that you may connect to your
to radio or television reception, which can be telephone line and still have all of those
determined by turning the equipment off and devices ring when your number is called. Too
on, the user is encouraged to try to correct the many devices on one line may result in failure
interference by one or more of the following to ring in response to an incoming call. In
measures: most, but not all, areas the sum of the RENs
• Reorient or relocate the receiving antenna. of all of the devices should not exceed five(5).
• Increase the separation between the To be certain of the number of devives you
equipment and receiver. may connect to your line, as determined by the
• Connect the equipment into an outlet that is RENs, contact your local telephone company.
on a different circuit than the receiver. If this equipment causes harm to the
• Consult the dealer or an experienced radio/ telephone network your telephone company
TV technician for help. may discontinue your service temporarily. If
possible, they will notify you in advance. If
Shielded interconnect cables must be employed advance notice is not practical they will notify
with this equipment to ensure compliance with you as soon as possible. You will also be
the pertinent RF emission limits governing this advised of your right to file a complaint with
device. the FCC.
Notice to Users of the US Telephone Network*
This fax modem also complies with fax branding
Your Stylistic maybe supplied with an internal requirements per FCC Part 68.
modern which complies with Part 68 of the FCC
Your telelphone company will probably ask
rules. On this Tablet PC is a label that contains
you to disconnect this equipment from the
the FCC Registration Number and the Ringer telephone network until the problem is
Equivalence Number(REN) for this equipment corrected and you are sure that the equipment
is not malfunctioning.

*For model with modern only

iv
 Copyright

This equipment may not be used on telephone DOC (INDUSTRY CANADA)

provided by your telephone company. Connection
to party lines is subject to state tariffs. Contact
NOTICES
your state’s public utility commission, public Notice to Users of Radios and Television
service commission or corporation commission for This Class B digital apparatus meets all
more information. requirements of the Canadian Interference
This equipment includes automatic dialing capability. Causing Equipment Regulations.
When programming and/or making test calls to Notice to Users of the Canadian Telephone
emergency numbers: Network*
• Remain on the line and briefly explain to the The Canadian Industry Canada label
dispatcher the reason for the call. identifies certified equipment. This certification
• Perform such activities in off-peak hours, means that the equipment meets certain
such as early morning or late evening. telecommunications network protective,
operational, and safety requirements. The
FCC rules prohibit the use of non-hearing aid Department dose not guarantee the equipment
compatible telephones in the following locations will operate to the user’s satisfaction.
or applications:
Stylistic is supplied with an internal modem
• All public or semipublic coin-operated or complies which complies with the Industry
credit card telephones. Canada certification standards for
• Elevators, highways, tunnels ( automobile, telecommunication network protection and safety
subway, railroad or pedestrian) where a requirements. Before connecting this equipment
person with impaired hearing might be to a telephone line the user should ensure
isolated in an emergency. that it is permissible to connect this equipment
• Places where telephones are specifically to the local telecommunication facilities. The
installed to alert emergency authorities user should be aware that compliance with the
such as fire, police or medical assistance certification standards does not prevent service
personnel. degradation in some situations.
• Hospital rooms, residential health care Repairs to telecommunication equipment should
facilities, convalescent homes and prisons. be made by a Canadian authorized maintenance
facility. Any repairs of alterations not expressly
• Workstations for the hearing impaired.
approved by Fujitsu or any equipment failures
• Hotel, motel or apartment lobbies. may give the telecommunication company
• Stores where telephones are used by patrons cause to request the user to disconnect the
to order merchandise. equipment from the telephone line.
• Public transportation terminals where telephones The connecting arrangement code for this
are used to call taxis or to reserve lodging or equipment is CA11A.
rental cars.
The Load Number assigned to each telephone
• In hotel and motel rooms as at least ten percent terminal device denotes the percentage of the
of the rooms must contain hearing aid total load to be connected to a telephone loop
compatible telephones or jacks for plug-in or circuit which is used by the device to prevent
hearing aid compatible telephones which will overloading. The termination on a loop may
be provided to hearing impaired customers consist of any combination of devices such
on request. that the total of the load numbers of all devices
does not exceed 100.

* For model with modem only

v
 For Authorized Repair Technicians Only

For safety, users should ensure that the

electrical ground of the power utility, the
telephone lines and the metallic water For continued protection against risk of fire,
pipes are connected together. replace only with the same type and rating
Users should NOT attempt to make such fuse.
connections themselves but should contact
the appropriate electric inspection authority
or electrician. This may be particularly
important in rural areas.

Danger of ecplosion if Lithium (CMOS)

UL Notice battery is incorrectly replaced. Replace
only with the same or equivalent type
This unit requires an AC adapter to operate. Use
recommended by the manufacturer. .
only UL Listed Class 2 adapter, output rating
Dispose of used batteries according to the
12VDC, 3A. Refer to the illustration below for the
manufacturer’s instruction.
correct AC Adapter output polarity:

Proper Disposal of Battery

Under federal, state or local law, it may be illegal
to dispose of batteries by putting them in the
rubbish bins or trash cans. Please take care of
our environment and dispose of batteries properly
for details regarding recycling or disposing of
To reduce the risk of fire, use only #26 unwanted batteries.
AWG or larger telecommunications line
cord.

vi
 Copyright

NOTE ON USE REQUIRED HIGH NOTE ON BACKUP DATA

SAFETY
Notice to Users of Radios and Television Please make a backup of the Operating
This product is designed and manufactured System, any software programs, and created
for general use, household use and ordinary files (and update regularly).
industrial use.
This product is not designed for or intended for If you send this product to Fujitsu, or any of
use under dangerous (fatal) conditions, unless its affiliates, suppliers, service providers or
extreme safety precautions are impemented. resellers for repair, Fujitsu does not guarantee
the data integrity. It is your responsibility to
Do not use this product without implementing back data up beforehand.
high-level safety precautions.
Failure to follow this waring may result in death. Fujitsu dose not assume any obligation for
personal injury, severs physical damage or compensation for damages, data integrity,
other loss, if used in or near any or more of the or restoration, etc., if your data is lost for any
following: reason, execpt as written in the warranty.
• nuclear reaction control system in a nuclear
facility
• automatic flight control system in an airplane
or other flight control system
• mass transport control system
• medical instruments for life support system
• missile launching control for weapon system

vii
Fujitsu STYLISTIC Q665
Table of Contents
1 4
PREFACE TROUBLESHOOTING
About the Guide................................................2 Troubleshooting
Identifying the Problem ................................21
2
GETTING TO KNOW YOUR Note:
• For more details inforamtion, you can
STYLISTIC download a soft copy from our Fujitsu
Locating the Controls and Connectors website: http://hk.fujitsu.com/pc
Top and Side Panel Components .....................4 • For Wireless LAN information, please refer
Bottom and Side Panel Components ...............5 to the help file of Intel PROSet in the Control
Right Side Panel Components .........................6 Panel.
Left Side Panel Components ............................7
• For Bluetooth information, please refer to the
Running the Tablet PC on its Battery User’s Gudie in the Bluetooth utility installed
on your Tablet PC.
Recharging the Battery......................................8
Running the Tablet on its Battery.......................9
Low Battery Condition.....................................10
Using the Stylus Pen
Setting the Pen ...............................................12
Using the Integtraed Digitizer .........................13

3
USING YOUR STYLISTIC
Power Sources
Connecting the AC Adapter ............................15
Starting Your Tablet PC
Power On ......................................................16
Boot Sequence ...............................................16
Warranty Registering for Your
Fujitsu STYLISTIC Q506................................16
Power Management
Power/Suspend/Resume Button ....................17
Suspend Mode ...............................................17
Hibernation (Save-To-Disk) Feature ...............18
Windows Power Management ........................19
Power Off .......................................................19

viii
 Preface

Preface

1
Preface
About This Guide The point icon highlights information that
will enhance your understanding of the
The Fujitsu STYLISTIC Q506 from Fujitsu is a subject material.
powerful convertible Tablet PC computer. It can
be used either as a standard Tablet PC using
Keyboard input, or in tablet configuration using pen
input. It is powered by an Intel® microprocessor,
has a built-in color touch screen display personal
computers(PCs) to a portable and versatile
environment.
The caution icon highlights information
Your Fujitsu STYLISTIC Q506 is a completely that is important to the sae operation of
self contained unit with an active-matrix(TFT), your computer, or to the integrity of your
touchscreen color LCD display. It has a powerful files. Please read all caution information
interface that enables it to support a variety of carefully.
optional features.

Conventions Used in the Guide

Keyboard keys appear in brackets.
Example: [Fn], [F1], [Esc], [Enter] and [Ctrl].

Pages with additional information about a specific The warning icon highlights information
topic are cross-referenced within the text. that can be hazardous to either you, your
Example:(See page xx.) computer, or your files. Please read all
warning information carefully.
On screen buttons or menu items appear bold.
Example: click OK to restart your STYLISTIC.
DOS commands you enter appear in Courier type.

Example: Shut down the computer?

2
 Getting to Know Your STYLISTIC

Getting to Know Your

STYLISTIC

3
Locating the Controls and Connectors

1 5
2
3
4

6 7 8 1 5

(This picture is for illustration purpose only and may look different from the actual unit)

Top and Left Side Panel Components

The following is a brief description of the top and
side features of the Fujitsu STYLISTIC Q506.

1. Wireless Antenna 6. Docking Connector

2. Ambient Light Sensor 7. Windows Button
3. Webcam Status LED 8. LCD Display
4. Webcam Camera
5. WWAN Antenna (optional)

4
 Getting to Know Your STYLISTIC

1
2
3

4 4

(This picture is for illustration purpose only and may look different from the actual unit)

Bottom and Side Panel Components

1. Rear Webcam LED

2. Rear Webcam Status LED
3. Rear Webcam
4. Built-in microphone

5
 1 2 3 4 5 6 7 8 9 10

(This picture is for illustration purpose only and may look different from the actual unit)

Right Side Panel Components

1. Speaker 7. Volume Down

2. Cover 8. Volume Up
3. Reset Button 9. Power Button
4. Micro SD Card Slot 10. Pen/Pen Garage
5. Mini SIM Slot (optional) 11. Pen Tether Hole
6. Shortcut Button

6
 Getting to Know Your STYLISTIC

1 2 3 4 5 6 57 8 9

(This picture is for illustration purpose only and may look different from the actual unit)

Left Side Panel Components

1. Pen Tether Hole 5. Cover

2. Audio Jack 6. Micro HDMI
3. USB 3.0 Port 7. Battery Charging LED
4. USB 2.0 Port 8. DC-input
9. Speaker

7
Running the Tablet PC on its
Battery
• When the battery is 90% or more
charged, it cannot be recharged even if
Recharging the battery
the AC adapter is connected. The battery
Connect the AC adapter to your Tablet PC. The can be recharged when its power level(i.e.
moment you connect as AC adapter to your remaining battery life) is 89% or less.
Tablet PC, the Tablet PC begings to charge the
internal standard battery. The Indicator LED • When a Tablet PC is turned off, all
turns on. indicators on the status LED goes off
immediately if the battery is completely
charged.
• The chargeability of the battery degrades
when it is used in an extremely hot or cold
• Before using the supplied battery place.
for the very first time after purchase.
remember to charge it fully. If a • When the battery is very hot, for example
charged battery has not been charged immediately after long usage of the Tablet
for more than a month, charge if fully PC, the battery protection feature may
before using it. be activated to prevent the battery from
being recharged. When the temperature
• When the battery is fully charged, the decreases, the Tablet PC automatically
Status Indicators turn off. begins to charge the battery.

• When an optional modular bay battery

is installed, it is charged along with the
internal standard battery.

8
 Getting to Know Your STYLISTIC

Running the Tablet PC on its Battery

This section describes the steps to run the Tablet
PC on its internal standard battery.

Disconnect the AC adapter from your Tablet PC

and press the power button.

Power Button

• The power level of the battery • When the battery is 90% or more
decreases faster when it is used in cold charged, it cannot be recharged to
place. the Tablet PC. The battery can be
•
The chargeability of the battery recharged to the Tablet PC. The battery
decreases after it has been used over can be recharged when its remaining is
a long period of time. If the battery runs 89% or less.
down very fast, replace it with a new
battery.

9
Low Battery Condition
When the battery is discharged to a very low
level, connect the AC adapter to your Tablet PC
immediately to recharge the battery.

• The use of a weak battery may result

in lost of data you are currently working
on. When the battery runs low, connect
the AC adapter to your Tablet PC as
soon as an external power source is
available or immediately save the data
you are working on, exit all application
and turn off the Tablet PC.

• Accessing data on the hard disk

consumes a lot of power. Therefore
when the battery is weak, connect an
AC adapter to the Tablet PC before
accessing data on the hard disk.
• If a battery is weak and there is no
system activity, the Tablet PC may
go into standby(i.e. suspend) mode.
However, if there is system activity,
the Tablet PC will go into standby
mode only after the system activity has
completed its processing.

• The Tablet PC will go into standby

mode when the indicator reaches 3%.
This is the default setting if the Tablet
PC.

10
 Getting to Know Your STYLISTIC

Using the Stylus Pen*

You can use the pen on your Tablet PC as an The pen of your Tablet PC is an electronic
electronic writing implement to select items instrument which can be damaged if used
and to navigate through menu options and incorrectly. Handle the pen with care. The
programs. Programs that support handwriting following list contains guidelines for proper
recognition also allow you to write characters pen handling:
directly on the screen with the pen. You can
also use the pen as a drawing tool. • Do not gesture with the pen.
The Tablet PC pen is retained securely in the • Do not use the pen as a pointer.
pen garage. This ensures that the pen cannot • Never use the pen on any other surface
be lost, regardless of the whether you use the than the screen of your Tablet PC.
Tablet PC as or transport it while travelling. • Do not try to turn the thumb grip on the
Always replace the pen in its garage when you pen.The thumb grip is used to place the
are not using it. pen in its slot and to take it out of the slot.
The Tablet PC is supplied with a pen cord which • Never store the pen with the lip bearing
you can attach to the eyelets on the pen and on the weight of the pen(e.g. with the tip
the Tablet PC. down in a pen holder). If the pen is
* Only specific STYLISTIC Q506 can support stored with the tip pointing down, this
stylus pen may have an adverse effect on the
pen mechanism(particularly under high
Eyelet for Pen Tether temperatures). In this case the pen tip
may react as though it is constantly
being pressed down, To avoid damage,
the pen should be stored in the pen slot
when not in use.
The pen can be influenced by electromagnetic
fields(cursor quivers or jumps). There may
be a few areas on the screen where the
cursor quivers slightly in spite of pressing
Pen Button the pen down firmly.

The screen responds to entries made with the

Pen Tip tip of the finger or the pen is in direct contact
Fujitsu STYLISTIC Q506 Pen with the screen.
You can use the pen to perform all the
functions for which you would otherwise use
a mouse. In addition, you can conveniently
• Only use the pen provided with your delete handwritten pen entries using the pen.
Tablet PC, Do not use substitute pen
tips that were not specially designed The pen does not support erasing function.
for your Tablet PC. Replace the stylus
tip if it is worn. The warranty does not
cover a scratched screen.
• While writing, you should take care not
to scratch the surface of the display.
(e.g. with a wrist watch or bracelet.)

11
Setting the Pen

Handling Mouse Pen

Open menu entries Click with the right mouse button. Push the Pen button.

Selecting menu Click with the left mouse button. Touch the menu entry with the
entries pen tip.
Starting programs Double click with the left mouse Briefly touch the program icon
button. twice with the pen tip.

Moving Drag with the left mouse button Place the pen tip directly on the
objects/windows held pressed. object/window. Hold the pen
tip pressed against the screen.
Move the desired object/window.
Opening a context Click with the right mouse button. Touch the desired element with
menu the pen and leave the pen on the
element fo ra moment.
Moving the cursor - Hover the pen tip on the screen.

12
 Getting to Know Your STYLISTIC

Using the Integrated Digitizer Clicking

The integrated Digitizer allows you to use To left-click, touch the object you wish to select
the included pen as pointing device. You cna and then lift the pen tip immediately.
use the pen to click, double-click, drag items
and icons, or to draw like a pen or pencil in
applications that support this behavior, such
as drawing or painting programs. See the
documentation that came with your application
for details.

To right-click, press the pen button on the

barrel or touch the pen to the screen for a
couple of seconds until the right mouse icon
appears at the tip.

Using the pen with the screen Double-clicking

To double-click, touch the item twice, and then
immediately remove the pen tip.

To avoid potential scratching and damage,

never use anything but the included pen
with the display.

Double-clicking the screen

• If the interval between taps is too long,

the double-click will not be executed.
• Parameters for the Touch Screen can
be adjusted from the Mouse Properties
dialog box located in the Windows
Control Panel.

13
 Using Your
STYLISTIC

14
 Using Your STYLISTIC

Power Sources
Your Fujitsu STYLISTIC Q506 has two possible
power sources: a primary Lithium ion battery
and an AC adapter.

DC Power Plug

AC Adapter

DC Output Cable

AC Cable

Connecting the AC Adapter

Connecting the AC Adapter

The AC adapter provides power for operating
your Tablet PC and Charging the batteries.
Connecting the AC Adapter Switching from AC Adapter Power to Battery
1. Plug the DC output cable into the DC power Power
jack of your Tablet PC. 1. Be sure that you have a charged battery
2. Plug the AC adapter into an AC electrical installed.
outlet.(Above Figure) 2. Remove the AC adapter.

The Lithium ion battery is not charged

upon purchase. Initially, you will need to
connect the AC adapter to use your Tablet
PC.

15
Starting Your Tablet PC
Power On Boot Sequence
The Power/Suspend/Resume button is used The procedure for starting-up your Tablet PC
to turn on your Fujitsu STYLISTIC Q665 from is termed the Bootup sequence and involves
its off state. Once you have connected your your Tablet PC’s BIOS. When your Tablet PC
AC adapter or charged the internal Lithium Ion is first turned on, the main system memory
Battery, you can power on your Tablet PC. is empty, and it needs to find instructions to
start up your Tablet PC. This information is
in the BIOS program. Each time you power
up or restart your Tablet PC, it goes through
a boot sequence which displays a Fujitsu
When you turn on your Tablet PC be sure
logo until your operating system is loaded.
you have a power source. This means that
During booting, your Tablet PC is performing a
a battery is installed and charged, or that the
standard boot sequence including a Power On
AC adapter is connected and has power.
Self Test (POST). When the boot sequence
is completed without a failure and without a
Press the Power/Suspend/Resume button to request for the BIOS Setup Utility, the system
start your system. When you are done working displays the operating system’s opening
you dcan either leave your Tablet PC in Standby screen.
mode, or you can turn it off.
The boot sequence is executed when:
• You turn on the power to your Tablet PC.
• You restart your Tablet PC from the
When the system display is closed, the Windows Shut Down Dialog box.
Suspend/Resume button is disabled. This • The software initiates a system restart.
feature prevents the system from being Example: When you install a new
accidentally powered up when not in use. application.
• You reset the system by pressing the
When you Power On your Tablet PC, it will three keys [Ctrl+Alt+Del].
perform a Power On Self test(POST) to check
the internal parts and configuration for correct Warranty Registering for Your
functionality. If a fault is found, your Tablet Fujitsu STYLISTIC Q506
PC will emit an audio warning and/or an error
message will be displayed. Depending on the How do I register?
nature of the problem, you may be able to You can register your STYLISTIC by going to
continue by starting the operating system or by our website:
entering the BIOS setup utility and revising the http://ww3.fujitsu-pcap.com.hk/SUP/
settings.
After satisfactory completion of the Power On
Self Test(POST), your Tablet PC will load your
operating system.

Never turn off your Tablet PC during the

Power On Self Test (POST) or it will cause
an error message to be displayed when you
turn your Tablet PC on the next time.

16
 Using Your STYLISTIC

Power Management
Your Fujitsu Stylistic has many options and Suspend Mode
features for conserving battery power. Some Suspend or Standby mode in WIndows
of these features are automatic and need no saves the contents of your STYLISTICs
user intervention, such as those for the internal system memory during periods of inactivity by
modem. However, others depend on the maintaining power to critical parts. This mode
parameters you set to best suit your operating will turn off the CPU, the display, the hard drive,
conditions, such as those for the display and all of the other internal components except
brightness. Internal power managements for those necessary to maintain system memory
your Tablet PC mat be controlled from settings and allow for restarting. Your Tablet PC can be
made in your operating system, pre-bundled put in Suspend mode by:
power management application, or from
settings made in BIOS setup utility. • Pressing the Power/Suspend/Resume
button when your system is turned on.
Besides the options available for conserving • Selecting Standby from the Windows Shut
battery power, there are also some things that Down menu.
you can do to prevent your battery from running • Timing out from lack of activity.
down as quickly. For example you can create • Allowing the battery to reach the Dead
as appropriate power saving profile, put your Battery warning condition.
Tablet PC into Suspend mode when it is not
performing as operation, and you can limit the Your STYLISTICs system memory typically
use of high power devices. As with all mobile, stores the file on which you are working you
battery power computers, there is a trade-off are working, open application information, and
between performance and power savings. any other data required to support operation
from Suspend mode, your Tablet PC will return
Power/Suspend/Resume Button to the point where it left off. You must see the
When you STYLISTIC is active, the Power/ Power.Suspend/Resume button to resume
Suspend/Resume button can be used to operation, and there must be as adequate
manually out your Tablet PC into Suspend power source available, or your Tablet PC will
mode. Push the Power/Suspend/Resume not resume.
button when your Tablet PC is active, but not
actively accessing anything , and immediately
release the button. You will hear two short
beeps* and your system will enter Suspend
mode.

If your STYLISTIC is suspended, pushing the

Power/Suspend/Resume button returns your
Tablet PC to active operation. You can tell
whether the system is Suspended by looking at
the Power indicator. If the indicator is visible and
not flashing, your Tablet PC is fully operational.
If the indicator is visible and fl ashing, your
notebook is in Suspend mode. If the indicator is
not visible, the power is off or your Tablet PC is
in Hibernation mode.(See Hibernation Feature)

* Only applicable for some models

17
 Hibernation (Save-To-Disk) Feature

• If you are running your STYLISTIC The Hibernation feature saves the contents of
on battery power, be aware that the your STYLISTIC’s system memory to the hard
battery continues to discharge while drive as a part of the Suspend/Resume mode.
your Tablet PC is in Suspend mode, You can enable or disable this feature.
though not as fast as when fully
operational. Enable or Disable the Hibernation Feature
• Disabling the Power/Suspend/Resume Windows 10:
button prevents it from being used to
put your STYLISTIC in Suspend or 1. Visit Control Panel.
Hibernation(Save-to DIsk) mode. The 2. Select "System and Security" and then
resume function of the button cannot select "Power Options"
be disabled.
• The suspend or hibernation(Save-to 3. Select "Change what power button
-Disk) mode should not be used with do", and click "Change settings that are
certain PC cards. Check your PC Card currently unavailable".
documentation for more information. 4. Under "Shutdown Setting", select the
When PC Cards or external devices
Hibernate tab. Select the box to enable
are in use, Hibernation(Save-to-Disk)
mode cannot return to the exact state or disable this feature and click "Save
prior to suspension, because all of the changes" to apply.
peripheral devices will be re-initialized
when the system restarts.
• If your STYLISTIC is actively accessing
information when you enter the
Suspend or Hibernate (Save-to Disk)
mode, changes to open files are not
lost. The files are left open and memory
is kept active during Suspend mode
or the memory is transferred to the
internal hard drive during hibernation
mode.
• The main advantage of using the
Hibernation(Save-to-Disk) function is
that power is not required to maintain
your data. This is particularly important
if you wil be leaving your STYLISTIC
in a suspended state for a prolonged
period of time. The drawback of using
Hibernation mode is the it lengthens the
power down and power up sequences
and resets peripheral devices.

18
 Using Your STYLISTIC

Windows Power Management Power Off

The Power Options icon located in the Windows Before turning off power, check that the hard
Control Panel allows you to configure some of drive/optical drive access indicator is off. If you
the power managment settings. For example, turn off the power while accessing a disk there
you can use the Power Options to set the is a risk of data loss. To ensure that your Tablet
timeout values for turning off the display and PC shuts down without error, use the Windows
hard disks whether you are running the Tablet shut down procedure.
PC on battery power or one of the adapters.

Restarting the System

If your system is on and you need to restart it,
be sure that you use the following procedure. Be sure to close all files, exit all
Windows 10 applications, and shut down your operating
system prior to turning off the power. If files
1. Click the Windows icon are open when you turn the power off, you
2. Click the Power, and select Restarting will lose any changes that have not been
from the list. saved, and may cause disk errors.

Using the correct procedure to shut down from

Windows allows your Tablet PC to complete
its operations and turn off power in the
proper sequence to avoid errors. The proper
sequence is:
Windows 10
1. Click the Windows icon
Turning off your STYLISTIC without 2. Click the Power, and select Shut down
exiting Windows or turning on your Tablet from the list.
PC within 10 seconds of the Tablet PC
being shut off may cause an error when If you are going to store your Tablet PC for a
you start the next time. month or more see Care and Maintenance
Section.

19
 Troubleshooting

20
 Troubleshooting

Troubleshooting
Your Fujitsu STYLISTIC Q506 is sturdy and Before you place the call, you should have
subject to few problems in the field. However, the following information ready so that the
you may encounter simple setup or operating customer support representative can provide
problems that you can solve on the spot, or you with the fastest possible solution:
problems with peripheral devices, that you can
solve by replacing the device. The information • Product name
in this section helps you isolate and resolve • Product configuration number
some of these straightforward problems and • Product serial number
identify failures that require service. • Purchase date
• Conditions under which the problem occurred
Identifying the Problem • Any error messages that have occurred
• Hardware configuration
If you encounter a problem that you are • Type of device connected, if any
having difficulty in solving, go through the
following procedure before pursuing further See the Configuration Label on the bottom
troubleshooting. of your Tablet PC for configuration and serial
number.
1. Turn off your Tablet PC.
2. Make sure the AC adapter is plugged into
your Tablet PC and to an active AC power
source.
3. Make sure that any card installed in the PC Card
slot is seated properly. You can also remove
the card from that slot, thus eliminating it as a
possible cause of failure.
4. Make sure that any devices connected to the
external connectors are plugged in properly.
You can also disconnect such devices, thus
eliminating them as possible causes of
failure.
5.Turn on your Tablet PC. Make sure it has
been off at least 10 seconds before you turn
it on.
6. Go through the boot sequence.

If you keep notes about what you have

tried, your support representative may
be able to help you more quickly by
giving additional suggestions over the
phone.
Do not return a failed Tablet PC to
your supplier until you have talked to a
support representative.

21